FIMI TX10 User manual
Please read the user manual &Disclaimer carefully before using and keep it for future reference.
FIMI TX10 User Manual & Disclaimer
Disclaimer and Warning
Thank you for purchasing this product. In order to protect your legitimate rights and interests, please
read the Quick Start Guide, Disclaimer, and Safe Operating Guidelines provided with this product
carefully before using this product. FIMI Technology Co., Ltd. (hereinafter referred to as FIMI Technology)
reserves the right to update the related guides and documents. Before setting up and using this product,
please visit the official website of fimi (http://www.fimi.com) to download the manual and read it carefully
1. FIMI Technology does not take up any responsibility for any consequences caused by purchasing and
maintaining this product through unofficial channels.
2. Once you start to use this product, it is deemed that you have read, understood, approved and accepted
the instruction manual, quick start guide, disclaimer and safe operation guidelines of this product.
3. In the process of using this product, please be sure to strictly abide by and implement the requirements
including but not limited to the instructions and safety instructions.FIMI Technology is not responsible for
the adverse consequences caused by not following instructions manual or tutorial videos.
4. For any personal injury, accident, property loss, legal dispute, and other incidents caused by the violation
of the safety instructions or the force majeure factors, all unfavorable events that cause conflicts of
interest shall be borne by the users. FIMI Technology will not bear any responsibility.
5. FIMI Technology will not bear any responsibility for any violation of laws and regulations that occurs
directly or indirectly by the user using this product.
6. Do not modify this product without authorization, and if resulting in property loss and personal injury,
FIMI Technology will not bear any compensation and legal responsibility.
7. When the propeller rotates at high speed, it may cause serious injury to the human body. To ensure
user safety, please turn off the power of the drone when operating the propellers. The legal responsibility
caused by ignoring this article shall be borne by the user.
8. Relevant national laws and regulations could restrict the flight zone. Before flying this product, users
should understand the relevant local regulations. The user shall bear all the responsibilities for the
relevant legal liabilities arising from non-compliance with the above provisions.
Operation guidelines
1. The drone is dangerous to a certain extent and is not suitable for use and operation by persons under
the age of 18 and other persons who do not have full capability of flying and operating this product.
2. Please make sure to keep a certain distance from people, animals, trees, vehicles and buildings when
the drone is in use. When someone approaches, please handle with care.
3. When operating the drone, please keep away from dangerous environments such as airports, railways,
highways, tall buildings and poles.
4. When operating the drone, please stay away from telecommunication stations, high-power antennas
and other areas with complex electromagnetic signals.
5. The flight height and flight distance of the drone relatived to the take-off point will be limited according
to relevant laws and policies.
6. Do not use this product at a place and time where the use of this product is prohibited by regulations
and policies.
7. In order to protect the legal rights and interests of users, please ensure that you follow the product
safety instructions during the use and operation.
8. Do not fly in bad weather such as in strong wind, rain, snow, fog, etc.
9. Please choose a place with good GPS signal and open environment to fly.
10. It is recommended that the user takes the first flight under the guidance of an experienced user.
Product description
The Fimi remote control with screen has built-in third-generation RokLink high-definition digital image
transmission system, which is compatible with FIMI X8 SE 2022 and subsequent drone products.It can
achieve a control distance of up to 10km at 1080p 30 FPS with the transmission low delay.The remote
control comes with a built-in 5.5-inch of 1920x1080p touch screen, the highest brightness can reach
1000cd/m², and support Android 9.0, 4G, Wi-Fi and satellite positioning functionality.
Buttons and functionality of the remote control
21 3 4 5 6
7
8
91011
12
13
14
15
16 17 18 20 21 22
23
24
25
29
30
26
27
28
19
1. Custom button: The system defaults one click to return to the menu, double click to return to the
main interface (Home button function), and long press for 2 seconds to display all the applications
in use. (Identifier: C1)
2. Antenna: Transmit control signal and video image
3. Scale knob: Logo silkscreen AUX1
4. Scale knob: Logo silkscreen AUX2
5. Flight control joystick: The system defaults to the Mode 2 (U.S. setup)
6. Custom key: Fn composite function (identification: C2):
1 . Zoom: C2+Right wheel
2 .Pairing: Press and hold C1+C2 for 5 seconds at the same time. When entering the pairing, the
battery indicator will be in the form of a marquee until the pairing is successful. If the pairing fails
within 60 seconds, the pairing mode will be exited
3. Forced shutdown: Press and hold the power button for 8 seconds
7. Display: Touch screen, screen size is 5.5-inch, resolution 1920*1080p, maximum brightness 1000cd/m²
8. Speaker: For playing the system voice, key prompt tone
9. 1/4" screw hole: For remote control to fix tripod
10. Cooling holes: For cooling the remote control
11. Microphone
12. Drone light control buttons: Long flight light, fill light custom button (short press to turn on/off the
auxiliary light, long press for 1.5 seconds to turn on/off the long flight light
13. Airplane mode switch button: Three modes, from left to right: smooth, normal, sport
14. Power button: Short press then long press for 1.5 seconds to turn on the remote control. When the
remote control is on, press it to turn on/off the screen; when the power is on, long press for 1.5 seconds
to shutdown/restart
15. Indicator light: Displays the current power level of remote control and current status
16. Photo and video recording buttons：Short press for the Photograph or recording, long press for 1.5
seconds to switch between photo/video recording
17. External microphone jack: Supports ordinary 3.5mm earphones
18. SIM card slot: Standard SIM card
19. HDMI port: Output remote control screen
20. Micro SD card slot: Supports up to 128G
21. Type-C interface: The user can charge the remote control while using. It can be connected to a computer
to upgrade the firmware of remote control
22. Pause and return button: Short press to pause, long press for 1.5 seconds to return
23. Roller: By default it controls the pitch angle of the gimbal, or can be customized for third-party gimbal’s
pitch or yaw angle control, marked with C7
24. Custom DIP Switch: Mark C3
25. Custom button: Mark C5
26. Joystick compartment : Joystick can be disassembled and stored here (the joystick needs to be
taken out from here for the first use)
27. Spare battery: Spare battery increases the battery life of the remote control (spare battery is optional)
28. Custom button: mark C6
29. Custom DIP Switch: Mark C4
30. Roller: The default state can adjust the EV/ISO value of the camera, and can be customized for
third-party payload gimbal’s pitch or yaw control, marked with C8
The light is always on in normal state, and the light will flash when abnormal
Short press the power button when the power is off
1+Beep <10%, 1≤25%, 2≤50%, 3≤75%,4>75%, always on
Flashing slowly
4 lights are flashing in turn
Always on
Check the battery
Battery indicator
drone not connected
Remote control pairing or
software upgrade
Communication is normal
Function definition of remote control indicator lights (four white lights)
Image transmission
Operating frequency 2400-2483MHz
The maximum control distance 10 Kilometers
Basic parameter information
Li-ion battery (4800mAh-7.2V)
Li-ion battery (4800mAh-7.2V)
Built-in battery
Spare battery (optional)
Charging way Charging method QC fast charge, support 12V/9V/5V
Rated power 20W
Storage space ROM 16GB+ expandable (up to 128G)
All telecom (China)：
LTE-FDD B1/3/5/8 LTE-TDD B34/38/39/40/41
WCDMA B1/8
HDMI
Standard 3.5mm audio port
SIM card
Video output interface
Audio output interface
2 .5hours（Use 9V USB charger）
4 hours
Charging time
Battery life
Charge and view battery level
Please fully charge the remote control before using it for the first time.
The built-in battery of the remote control will enter the sleep mode as the factory default , please
charge and activate it before use.
Using the recommended charger. Charging time takes about 2.5 hours (9V charger).
Working environment temperature -10 -60℃
GNSS GPS,GLONASS,BEIDOU
Charging ambient temperature 0-40℃
USB-C cable
(charger not included with the product)
Check the battery: Short press the power button when the power is off.
Power on: Short press then long press for 1.5 seconds to turn on the remote control.
Power off: Long press 1.5 seconds to pop up the shutdown option, click the shutdown option to shut down.
Low Battery level High
Preparation before use
Take out the joystick Install the joystick Unfold the antenna
Activation
When using the remote control for the first time, please follow the instructions on the screen.
Connect the drone
In the standard package, the drone and the remote control are already paired by default. When the
drone and the remote control are turned on, they will be automatically connected.
In order to ensure the best transmission, the angle of the antenna should be in accordance with the
flight environments.
Pairing
After turning on the drone and the remote control, long press the pairing button of the drone until the
tail light goes off, the drone enters the pairing state, and then long press the remote control C1+C2 at
the same time. After pressing the buttons for more than 5 seconds, the remote control enters the
frequency pairing state. After a few seconds, the tail light of the drone will be turned on again, indicating
that the pairing is successful.
Sticks Control
Mode 1
Forward
Backward
Up
Down
Counter-
clockwise Clockwise Left Right
Left stick Right stick
Mode 2
Forward
Backward
Left Right
Right stick
Up
Down
Counter-
clockwise Clockwise
Left stick
Mode 3
Up
Down
Counter-
clockwise Clockwise
Right stick
Forward
Backward
Left stick
Left Right
Connect to the APP
After downloading and installing the APP, register a FIMI user account and log in, click to enter the flight
interface, you can also use it without logging in.
Note: You will not be able to enjoy some functions without logging in, such as flight recording, etc.
3. FIMI Navi 2.0
After launching the APP, click "Enter Device" to enter the main interface of the APP, and the option box
"Do you want to allow Fimi Navi2.0 to access rc? Click "OK" to connect.
Do you want to allow Fimi Navi2.0 to access rc?
Cancel OK
Image transmission interface
1 2 3
678
4
9
5
1. Drone status
In flight： Displays the current status of the drone
GPS: Displays the current flight mode of the drone, including GPS, VPU, ATTI
S： Displays the current sport mode of the drone
：Click to return to the interface
2. Real-time flight parameters
110m： The vertical height between the current position of the drone and the Home point
1111m: The horizontal distance between the current position of the drone and the Home point
VS 3.6m/s： The current vertical flight speed of the drone
HS 6.6m/s: The current horizontal flight speed of the drone flight
3. Signal status and general settings
： Displays GPS signal strength, 0-6 in red for weak signal; 7-12 in yellow for medium signal; 13 or
above in white for good signal
: Displays the signal strength of the connection between the remote control and the aircraft, click to
enter the remote control settings
： Displays real-time battery level, click to enter battery settings
: Click to enter settings
GPS
4. Camera operation
3:26: Video duration
: Switch the current mode of the camera between taking photos or video recording
: Take a photo or start video recording, or stop video recording
: Media library, enter to download or view the video and photos stored on the Micro SD card inserted
in the aircraft
: Displays Current zoom factor or adjust zoom
5. Intelligent Flight
Entering the Intelligent Flight page, you can perform one-key automatic take-off, landing, return, pointing
flight, orbiting flight, route flight, Selfie, spiral flight, and shooting in tripod mode and aerial photography
mode
1X
： One-key take-off
： One-key landing
： One-key return
： Route flight, including flight setting, map setting and historical routes
： Smart mode, including normal follow, parallel follow and locked follow
Table of contents
