
+44 (0) 330 999 0019
3. OPERATING INSTRUCTIONS
• Install the batteries: Release the latch and open the top cover. Remove the battery compartment
and put in 8 AA batteries, respecting the correct polarities (+ and -). Close the top cover and
fasten the latch.
• Activate megaphone: Press the power switch and check that the red LED power indicator is lit.
• Talk Function: Press the power switch to activate the megaphone and ensure that the signal
switch is set to ‘Talk’. Adjust the volume to the desired level and speak into the microphone. Please
note: the closer the sound source is to the microphone, the better the amplication.
• Siren Function: Press the power switch to activate the megaphone and ensure thesignal switch is
set to ‘Siren’. The speaker will generate a continuous siren. The siren will stop as soon as the power
switch is released.
4. BASIC TROUBLESHOOTING
• If the volume is quiet/weak, the batteries may be out of power. Following step 1 to replace the
batteries.
• If the megaphone does not work, check that the batteries have been installed in the correct way,
respecting the polarities marked on the battery compartment.
• If this doesn’t resolve the issue, check that the batteries are properly contacting the terminals.
5. SPECIFICATIONS
• Rated power output: 8W
• Max power output: 10W
• Power source: 8 x l.5V AA batteries
• Eective distance: Approx. 250m
• Power duration: Approx. 6 Hours
• Weight: 0.75kg (without batteries)
6. PRECAUTIONS
• Don’t expose to direct sunlight for a long period of time.
• Avoid exposure to rain, water or high humidity levels.
• Don’t use the megaphone close to people’s ears. This may cause hearing damage.
• If not in use for a long period of time, remove the batteries and store them separately to prevent
damage to the circuits in the megaphone.
Issued: V1 March 2020
INSTRUCTION
MANUAL
Product code: 114-1041 Model: HMP4