Firesense 61928 User manual

1
Owner's Manual
OUTDOOR FIRE PIT TABLE
ITEM # 61928
ATTACH YOUR RECEIPT HERE
Serial Number ___________ Purchase Date _____________
Manufacturer: Changzhou Wellife Furnace Co., Ltd.
Questions, problems, missing parts? Before returning to your retailer, call our customer
service hotline at 1-866-985-7877, 9 a.m. –6 p.m., EST, Monday –Friday or email at
[e-mail].

2
PART
DESCRIPTION
QUANTITY
A
Burner Cover
1
B
Table Top
1
C
Burner
1
D
Burner Bracket
1
E
Side Panel 1
1
F
Side Panel 2
1
G
Back Panel
1
H
Door Frame
1
I
Gas Tank Support
1
J
Bolt(8*52mm)/Washer/Spring Washer/Nut(M8)
4
K
Bolt(6*22mm)/Washer(M6)
10
L
Screwdriver
1
M
Wrench
1
N
Allen Wrench
1
O
Fire Glass
2 boxes/4 bags
P
Protective Fire Pit Cover
1
Q
LPG Tank Cover
1
R
Burner Cover Spring Button
1
S
Bolt(4*10mm)
3
T
Phillips Screwdriver
1
PACKAGE CONTENTS

3
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install this appliance. If you
have any questions regarding the product, please call customer service 1-866-985-7877, 9 a.m. –6 p.m., EST, Monday –
Friday.
This appliance has been tested to and complies with the ANS Z21.97-2010, Outdoor Decorative Gas Appliances CGA CR
97-003 Outdoor Gas Fireplaces. The installation must conform to local codes or in the absence of local codes, to the
National Fuel Gas Code. ANSIZ223.1.This manual contains important information about the assembly, operation and
maintenance of this patio heater. General safety information is presented in the first few pages and is also located
throughout this manual. Keep this manual for future reference and to educate new users of this appliance. This manual
should be read in conjunction with the labeling on the appliance. Safety precautions are essential when any mechanical or
propane fueled equipment is involved. These precautions are necessary when using, storing, and servicing. Using this
appliance with the respect and caution demanded will reduce the possibilities of personal injury or property damage. The
following symbols shown below are used extensively throughout this manual. Always heed these precautions, as they are
essential when using any mechanical or propane fueled equipment.
DANGER
DANGER indicates an imminently hazardous situation which,
is not avoided, will result in death or serious injury.
DANGER
Failure to comply with the precautions and instructions
provided with this fire pit can result in death, serious bodily
injury and property loss or damage from hazards of fire,
explosion, burn asphyxiation, and/or carbon monoxide
poisoning. Only persons who can understand and follow the
instructions should use or service this fire pit.
Solid fuels shall not be burned with this appliance.
DANGER
FOR YOUR SAFETY:
If you smell gas:
1. Shut off gas to the appliance.
2. Extinguish any open flame.
3. If odor continues, keep away from the appliance and
immediately call your gas supplier or fire department.
HARDWARE CONTENTS
SAFETY INFORMATION

4
SAFETY INFORMATION
DANGER
CARBON MONOXIDE HAZARD
This fire pit is a combustion appliance. All combustion
appliances produce carbon monoxide (CO) during the
combustion process. This product is designed to produce
extremely minute, non-hazardous amounts of CO if used
and maintained in accordance with all warnings and
instructions. Do not block air flow into or out of the fire pit.
Carbon Monoxide (CO) poisoning produces flu-like
symptoms, watery eyes, headaches, dizziness, fatigue
and possibly death. You can't see it and you can't
smell it. It's an invisible killer. If these symptoms are
present during operation of this product get fresh air
immediately!
For outdoor use only.
Never use inside house, or other unventilated or
enclosed areas.
This fire pit consumes air (oxygen). Do not use in
unventilated or enclosed areas to avoid endangering
your life.
WARNING
DANGER
EXPLOSION - FIRE HAZARD
Keep solid combustibles, such as building materials,
paper or cardboard, a safe distance away from the
fire pit as recommended by the instructions.
Provide adequate clearances around air openings
into the combustion chamber.
Never use the fire pit in spaces which do or may
contain volatile or airborne combustibles, or products
such as gasoline, solvents, paint thinner, dust particles
or unknown chemicals.
During operation, this product can be a source of
ignition. Keep fire pit area clear and free from
combustible materials, gasoline, paint thinner, cleaning
solvents and other flammable vapors and liquids. Do
not use fire pit in areas with high dust content.
Minimum fire pit clearances from combustible
materials: two (2) feet from the sides & two (2) feet
from the rear, 6 feet from ceiling.
We cannot foresee every use which may be made of
our fire pit.
Check with your local fire safety authority if you have
questions about fire pit use.
Other standards govern the use of fuel gases and heat
producing products for specific uses. Your local
authorities can advise you about these.
If no local codes exist, follow National Fuel Gas Code,
ANSI Z223.1. In Canada, installation must conform to
local codes. If no local codes exist, follow the current
National standards of CANADA CAN/CGA-B 149.2.
DANGER
WARNING
Do not store or use gasoline or other flammable vapors
and liquids in the vicinity of this or any other appliance.
An LP-cylinder not connected for use shall not be
stored in the vicinity of this or any other appliance.
WARNING
Improper installation, adjustment, alteration, service or
maintenance can cause property damage, injury or
death. Read the installation, operation and
maintenance instructions thoroughly before installing
or servicing this equipment.
CARBON MONOXIDE HAZARD
This appliance can produce
carbon monoxide which has
no odor. Using it in an enclosed
space can kill you. Never use this
appliance in an enclosed space
such as a camper, tent or home.
WARNING: For Outdoor Use Only
DANGER
EXPLOSION - FIRE HAZARD
Never store propane near high heat, open flames,
pilot lights, direct sunlight, other ignition sources or
where temperatures exceed 120 degrees F (49 ).C
Propane vapors are heavier than air and can
accumulate in low places. If you smell gas, leave the
area immediately.
Never install or remove propane cylinder while fire pit
is lighted, near flame, pilot lights, other ignition sources
or while fire pit is hot to touch.
This fire pit is red hot during use and can ignite
flammables too close to the burner. Keep flammables
at least 2 feet from sides & 2 feet from rear, 6 feet
from ceiling. Keep gasoline and other flammable liquids
and vapors well away from fire pit.
Store the propane cylinder outdoors in a well ventilated
space out of reach of children. Never store the propane
cylinder in an enclosed area (house, garage, etc.). If
fire pit is to be stored indoors, disconnect the propane
cylinder for outdoor storage.
WARNING
WARNING indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.

5
WARNING
California Proposition 65
Combustion by-products produced when using
this product contain chemicals known to the State
of California to cause cancer, birth defects, and
other reproductive harm.
WARNING
BURN HAZARD
Never leave fire pit unattended when hot or in use.
Keep out of reach of children.
WARNING
This product is fueled by propane gas. Propane gas
is invisible, odorless, and flammable. An odorant is
normally added to help detect leaks and can be
described as a rotten egg”smell. The odorant can"
fade over time so leaking gas is not always detectable
by smell alone.
Propane gas is heavier than air and leaking propane
will sink to the lowest level possible. It can ignite by
ignition sources including matches, lighters, sparks or
open flames of any kind many feet away from the
original leak. Use only propane gas set up for vapor
withdrawal.
Store or use propane gas in compliance with local
ordinances and codes or with ANSI/NFPA 58. Turn off
propane when not in use.
WARNING
Alert children and adults to the hazards of high surface
temperatures. Stay away from these surfaces to avoid
burning skin or igniting clothing.
Carefully supervise young children when in the vicinity
of the fire pit.
Do not hang clothing or any other flammable materials
from the fire pit, or place on or near the fire pit.
Replace any guard or protective device removed for
servicing the appliance prior to placing back in service.
Installation and repair should be done by a qualified
service person. The fire pit should be inspected
before use and annually by a qualified service person.
More frequent cleaning may be required as necessary.
It is imperative that the control compartment, burners,
and circulating air passageway of the appliance be
kept clean.
SAFETY INFORMATION
CAUTION
CAUTION indicates an imminently hazardous situation
which, if not avoided, may result in minor or moderate
personal injury, or property damage.
CAUTION
SERVICE SAFETY
Keep all connections and fittings clean. Make sure
propane cylinder valve outlet is clean.
During set up, check all connections and fittings for
leaks using soapy water. Never use a flame.
Use as a heating appliance only. Never alter in any
way or use with any device.
WARNING
Certain materials or items, when stored under the
fire pit, will be subjected to radiant heat and could be
seriously damaged.

6
OPERATION CHECKLIST
Operation Checklist
For a safe and pleasurable heating experience, perform this checklist before each use.
Before Operating:
1. I am familiar with entire owner’s manual and understand all precautions noted.
2. All components are properly assembled, intact and operable.
3. No alterations have been made.
4. All gas connections are secure and do not leak.
5. Wind velocity is below 10 mph.
6. Unit will operate at reduced efficiency below 40 F /4.44 C.
7. Fire pit is outdoors (outside any enclosure).
8. There is adequate fresh air ventilation.Do not use this appliance if any part has been under water.
Immediately call a qualified service technician to inspect the appliance and to replace any part of
the control system and gas control which has been under water.
9. Fire pit is away from gasoline or other flammable liquids or vapors.
10. Fire pit is away from windows, air intake openings, sprinklers and other water sources.
11. Fire pit is at least 24 in. on rear and at least 24 in. on sides from combustible materials.
12. Fire pit is on a hard and level surface.
13. There are no signs of spider or insect nests.
14. All burner passages are clear.
15. All air circulation passages are clear.
16. Children and adults should be alerted to the hazards of high surface temperatures and should stay
away to avoid burns or clothing ignition.
17. Young children should be carefully supervised when they are in the area of the fire pit.
18. Clothing or other protective material should not be hung from the fire pit, or placed on or near the
fire pit.
19. Any guard or other protective device removed for servicing the fire pit must be replaced prior to
operating the fire pit.
20. Installation and repair should be done by a qualified service person. The fire pit should be inspected
before use and at least annually by a qualified service person.
21. More frequent cleaning may be required as necessary. It is imperative that control compartment,
burner and circulating air passageways of the fire pit be kept clean.
After Operation
1. Gas control is in OFF position.
2. Gas Tank valve is OFF.
3. Disconnect Gas line.
4. After each use, replace cap on tank.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and hardware contents above. If any part is missing or damaged, do not
attempt to assemble the product. Contact customer service for replacement parts.
Estimated Assembly Time: 60 minutes
Tools RequiredAssembly(not included) :
Leak Test Solution.

7
NOTE: It is best to use TWO PEOPLE for assembly of this gas
fire pit.
1. Connect Side Panels (E & F) to Back Panel (G) and Door Frame (H).
Align holes in Side Panels/Back Panel/Door and insert Bolt(M6*22)(K)
through Washer(M6)(K) and then insert Bolt/Washer through holes.
Use Allen Wrench (N) to tighten. DO NOT OVERTIGHTEN as you
will need to adjust the panels to ensure proper alignment.
2. Place the Gas Tank Support (I) over the bottom piece of the Back Panel (G)
and attach the front of the Gas Tank Support (I) to the bottom of the Door
Panel (H) by inserting Bolt(M6*22)(K) through Washer(M6)(K) and then
insert Bolt/Washer through holes. Tighten with Allen Wrench (N)
ASSEMBLY
1
2

8
3. Place the Burner Bracket (D) onto the assembled panels. Place
the Burner (C) onto the Burner Bracket (D) making sure the
burner controls are facing forward toward the Door Frame (H).
(No hardware is required)
4. Turn the Table Top (B) upside down and attach the Bolt(8*52mm)(J)
to the underside of the Table Top using the Screwdriver (L). Then
turn the Table Top back over, and align the Bolts with the holes in
the Burner Bracket (D) and assembled panels and insert the Bolts
through the holes. Secure the Bolts with Washer/Spring Washer/Nut(M8).
Tighten with Wrench (M).
ASSEMBLY
3
4

9
5. Attach the Burner Cover Spring Button (R) to the underside of the
Burner Cover (A) using the Bolt(4*10mm)(S) and the Phillips
Screwdriver (T). Pour the Fire Glass (O) around the Burner (C).
Do not obstruct pilot light housing. Put the Burner Cover (A) on the
Burner when the fire pit is NOT in use and is completely cooled. You
may also cover the fire pit with the Protective Fire Pit Cover (P) once
it has completely cooled. DO NOT PUT THE PROTECTIVE FIRE PIT
COVER ON A HOT FIRE PIT.
6. Connect the hose and regulator to the cylinder. The propane gas and
cylinder are sold separately. Use a standard 20 lb. propane cylinder only.
Use this fire pit only with a propane vapor withdrawal supply system. See
Chapter 5 of the standard for storage and handling of liquefied petroleum
gas, ANSI/NFPA 58. Your local library or fire department should have this
book. Storage of an appliance indoors is permissible only if the cylinder is
disconnected and removed from the appliance. A cylinder must be stored
outdoors in a well-ventilated area out of reach of children. A disconnected
cylinder must have dust caps tightly installed and must not be stored in a
building, garage or any other enclosed area. The maximum inlet gas supply
pressure: 250 psi. The minimum inlet gas supply pressure: 5 psi.
The minimum hourly of 10000 Btu is required input rating for a fire pit for
automatic operation at rating less than full input rating. The pressure
regulator and hose assembly supplied with the appliance must be used.
The installation must conform with local codes, or in the absence of local
codes, with national fuel gas code, ANSI Z223.1/NFPA54, natural gas and
propane Installation Code, CSA B149.1, or propane storage and handling
code, B149.2.
Use the LPG Tank Cover (Q) to cover the LPG tank prior to placing
the LPG tank under the assembled Fire Pit.
ASSEMBLY
6
5

10
A dented, rusted or damaged propane cylinder may be
hazardous and should be checked by your cylinder supplier.
Never use a propane cylinder with a damaged valve connection.
The propane cylinder must be constructed and marked in accordance
with the specifications for LP gas cylinders of the U.S. Department of
Transportation(DOT) or the standard for cylinders, spheres and tubes
for transportation of dangerous goods and commission, CAN/CSA-B339.
The cylinder must have a listed overfilling prevention device.
The cylinder must have a connection device compatible with the
connection for the appliance.
The cylinder used must include a collar to protect the cylinder
valve.
Never connect an unregulated propane cylinder to the appliance.
Attach regulator to cylinder. Complete attachment. Install cylinder.
Secure the propane cylinder with the cylinder screw by
tightening the screw until it comes in contact with the cylinder.
Do not store a spare LP-gas cylinder under or near this appliance;
Never fill the cylinder beyond 80 percent full;
Place the dust cap on the cylinder valve outlet whenever the cylinder is not in use. Only install the type of dust cap on
the cylinder valve that is provided with the cylinder valve. Other type of caps or plugs may result in leakage of
propane.
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE INTENDED FOR RESIDENTIAL USE ONLY.
Do not sit or stand on this table.
Keep children away during assembly, as this item contains small parts which can be
swallowed by children.
Do not use indoors or inside any enclosure.
Retain the assembly instructions for future reference.
Installer –Please leave these instructions with the owner.
[
ASSEMBLY

11
OPERATION INSTRUCTIONS
Leak Test
1. Make 2-3 oz. of leak test solution (one part liquid dishwashing detergent and three parts water).
2. Apply several drops of solution where hose attaches to regulator.
3. Apply several drops of solution where regulator connects to cylinder.
4. Make sure all fire pit and light valves are OFF.
5. Turn cylinder valve ON.
If bubbles appear at any connection, there is a leak.
1. Turn cylinder valve OFF.
2. If leak is at hose/regulator connection: tighten connection and perform another leak test. If bubbles
continue appearing, the hose should be returned to the place of purchase.
3. If leak is at regulator/cylinder valve connection: disconnect, reconnect, and perform another leak
check. If you continue to see bubbles after several attempts, cylinder valve is defective and should be
returned to cylinder place of purchase.
If NO bubbles appear at any connection, the connections are secure.
NOTE: Whenever gas connections are loosened or removed, you must perf
orm a complete leak test.
Complete installation.
Regulator / Cylinder
connection
Hose / Regulator
connection
Perform all leak tests outdoors.
Extinguish all open flames.
NEVER leak test when smoking.
Do not use the fire pit until all connections have been
leak tested and do not leak.
WARNING
Underside of burner

12
OPERATION INSTRUCTIONS
DANGER
• CARBON MONOXIDE HAZARD
• For outdoor use only. Never use inside house, or other
unventilated or enclosed areas. This fire pit consumes air
(oxygen). Do not use in unventilated or enclosed areas to
avoid endangering your life.
Very hot while in operation!
Never lean over the fire pit while in use.
Failure to comply with these instructions may result in
serious bodily injury.
WARNING
Before Turning Gas Supply ON:
1. Your fire pit was designed and approved for outdoor use only. Do NOT use it inside a building,
garage, or any other enclosed area.
2. Make sure surrounding areas are free of combustible materials, gasoline, and other flammable
vapors or liquids.
3. Ensure that there is no obstruction to air ventilation. Be sure all gas connections are tight and
there are no leaks.
4. Be sure the cylinder cover is clear of debris. Be sure any component removed during assembly
or servicing is replaced and fastened prior to starting.
Before Lighting:
1. Fire pit should be thoroughly inspected before each use, and by a qualified service person at least
annually. If relighting a hot fire pit, always wait at least 5 minutes.
2. Inspect the hose assembly for evidence of excessive abrasion, cuts, or wear. Suspected areas
should be leak tested. If the hose leaks, it must be replaced prior to operation. Only use the
replacement hose assembly specified by manufacturer. The burner must be replaced prior to the
appliance being put into operation if it is evident that the burner is damaged. The replacement burner
should be specified by manufacturer.
Lighting:
1) Turn the control knob to the “OFF” position (Figure a).
2) Fully open LP cylinder valve.
Note: For initial start or after any cylinder change, hold Control Knob IN for
2 minutes to purge air from gas lines before proceeding.
3) Push in gas control knob and turn counterclockwise to “IGNITE”
(Figure b) to light the fire pit. If needed, keep depressing and turning control knob
counterclockwise until the fire pit lights (You should hear a clicking sound).
4) After fire pit lights, release control knob. Push in and turn the control knob to the “HIGH”, then
release control knob. If you want a lower temperature, push in the control knob and turn
counterclockwise to the “LOW” (Figure c).
Note: If burner fails to remain lit, all valves should be closed and a waiting period of at least 5
minutes should pass before attempting to light.
Caution:Do not attempt to operate until you have read and understand all General Safety Information
in this manual and all assembly is complete and leak checks have been performed.
Figure a
O
F
F
P
u
s
h
t
o
t
u
H
r
G
n
I
H
LOW
E
T
I
N
G
I
Figure b
O
F
F
P
u
s
h
t
o
t
u
H
r
G
n
I
H
LOW
E
T
I
N
G
I
Figure c
O
F
F
P
u
s
h
t
o
t
u
H
r
G
n
I
H
LOW
E
T
I
N
G
I

13
OPERATION INSTRUCTIONS
Shut Down:
1. To extinguish burner depress control knob and continue to turn it clockwise to OFF.
2. Turn cylinder valve clockwise to OFF and disconnect regulator when heater is not in use.
When fire pit is ON:
Burner will display tongues of blue and yellow flame. These flames should not be yellow or produce thick
black smoke, which would indicate an obstruction of airflow through the burners. The flame should be
blue with straight yellow tops. If excessive yellow flame is detected, turn off fire pit and consult
“Troubleshooting”on page 15.
Re-lighting:
1. Turn control knob to OFF.
2. Repeat the "Lighting” steps on prior page.
WARNING
FOR YOUR SAFETY
Be careful when attempting to manually ignite this
fire pit. Holding in the control knob for more than 10
seconds before igniting the gas will cause a ball of
flame upon ignition.
WARNING
FOR YOUR SAFETY
Fire pit will be hot after use. Handle with extreme care.
CARE AND MAINTENANCE
WARNING
FOR YOUR SAFETY:
Do NOT touch or move fire pit for at least 45 minutes
after use.
Burner is hot to the touch.
Allow burner to cool before touching.
To enjoy years of outstanding performance from your fire pit, make sure you perform the following
maintenance activities on a regular basis:
Keep exterior surfaces clean.
1. Use warm soapy water for cleaning. Never use flammable or corrosive cleaning agents.
2. While cleaning your unit, be sure to keep the area around the burner dry at all times. Do not submerge
the control valve assembly. If the gas control is submerged in water, do NOT use it. It must be replaced.
a. Keep the appliance area clear and free from combustible materials, gasoline and other
flammable vapors and liquids.
b. Do not obstruct the flow of combustion and ventilation air.
c. Keep the ventilation opening of the cylinder enclosure free and clear from debris.
3. Air flow must be unobstructed. Keep controls, burner, and circulating air passageways clean. Signs
of possible blockage include:

14
CARE AND MAINTENANCE
Gas odor with extreme yellow tipping of flame.
Fire pit does NOT reach the desired temperature.
Fire pit glow is excessively uneven.
Fire pit makes popping noises.
Spiders and insects can nest in burner or orifices. This dangerous condition can damage fire pit and
render it unsafe for use. Clean burner holes by using a heavy-duty pipe cleaner. Compressed air may
help clear away smaller particles.
Carbon deposits may create a fire hazard. Clean burner with warm soapy water if
any carbon deposits develop.
Note: In a salt-air environment (such as near an ocean), corrosion occurs more quickly than normal.
Frequently check for corroded areas and repair them promptly.
TIP:
Use high-quality automobile wax to help maintain the appearance of
your fire pit. Apply to exterior surfaces only. Do not apply to borner.
Storage
Between uses:
Turn Control Knob OFF.
Disconnect LP source.
Store fire pit in an area sheltered from direct contact with inclement weather (such as rain,
sleet, hail, snow, dust and debris).
If desired, cover fire pit to protect exterior surfaces and to help prevent build-up in air passages.
Note: Wait until fire pit is cool before covering.
During periods of extended inactivity or when transporting:
Turn Control Knob OFF.
Disconnect LP source and move to a secure, well-ventilated location outdoors.
Store fire pit in an area sheltered from direct contact with inclement weather (such as rain,
sleet, hail, snow, dust and debris).
If desired, cover fire pit to protect exterior surfaces and to help prevent build-up in air passages.
Never leave LP cylinder exposed to direct sunlight or excessive heat.
Note: Wait until fire pit is cool before covering.
Service
Only a qualified service person should repair gas passages and associated components.
Caution: Always allow fire pit to cool before attempting service.

15
TROUBLESHOOTING
NOITCAEVITCERROCESUACELBISSOPMELBORP
Burner won`t light
Burner flame is low
Carbon build up-
Thick black smoke
Propane cylinder is frosted over
Blockage in orifice
Control knob is not in ON position
Gas pressure is low
Control knob fully ON
Dirt or film on burner
Blockage in burner Remove blockage and clean burner
inside and outside
Check burner and orifices for
blockage
Clean burner
Outdoor temperature is less than 40ºFand
tank is less than 1 4 full/
Turn cylinder valve OFF and fill the
cylinder
Use a full cylinder
Turn control knob to ON
Wait until the propane cylinder
warms up and becomes unfrosted
Clear blockage

5 YEAR LIMITED WARRANTY –Customers in the Continental US
All components are warranted for a period of 5 years after date of purchase by the original owner against defects in
materials and workmanship under normal use. This warranty does NOT cover normal wear and weathering, assembly
and/or maintenance OR use in a commercial application if model is not designated as a commercial model. At Well
Traveled Living’s sole discretion, products under warranty will be repaired and/or replaced at no charge to the customer.
Any returns sent back to Well Traveled Living must be sent via prepaid freight and in the original retail packaging.
For warranty service contact Well Traveled Living at the address, phone numbers or internet site and email listed in this
owner’s manual. Be sure to have your sales receipt, date of purchase and catalogue/model numbers available when
calling. All warranty service will be coordinated by the Well Traveled Living’s, Amelia Island, Florida service center.
This warranty is extended only to the original purchaser. Proof of purchase will be required before warranty service is
rendered. The sales receipt is the only valid proof of purchase. This warranty only covers failures due to defects in
materials or workmanship which occur during normal use. Failures and/or damage which result from accident, negligence,
misuse, abuse, neglect, mishandling, alteration or modification, failure to maintain, improper assembly or maintenance,
service by unauthorized agency or use of unauthorized components or damage that is attributable to acts of God are NOT
covered.
***THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED ABOVE***
***PURCHASER ASSUMES ALL RISKS IN THE ASSEMBLY AND OPERATION OF THIS UNIT***
***FAILURE TO FOLLOW WARNINGS AND OPERATIONAL INSTRUCTIONS CONTAINED IN THIS MANUAL CAN
RESULT IN SEVERE PROPERTY DAMAGE AND/OR PERSONAL INJURY***
IN NO EVENT WILL WELL TRAVELED LIVING, OR ITS DIRECTORS, OFFICERS OR AGENTS BE LIABLE TO THE
PURCHASER OR ANY THIRD PARTY, WHETHER IN CONTRACT, IN TORT, OR ON ANY OTHER BASIS, FOR ANY
INDIRECT, SPECIAL, PUNITIVE, EXEMPLARY, CONSEQUENTIAL, OR INCIDENTAL LOSS, COST, OR DAMAGE
ARISING OUT OF OR IN CONNECTION WITH THE SALE, MAINTENANCE, USE, OR INABILITY TO USE THE
PRODUCT, EVEN IF WELL TRAVELED LIVING OR ITS DIRECTORS, OFFICERS OR AGENTS HAVE BEEN
ADVISED OF THE POSSIBILITY OF SUCH LOSSES, COSTS OR DAMAGES, OR IF SUCH LOSSES, COSTS, OR
DAMAGES ARE FORESEEABLE. IN NO EVENT WILL WELL TRAVELED LIVING, OR ITS OFFICERS, DIRECTORS,
OR AGENTS BE LIABLE FOR ANY DIRECT LOSSES, COSTS OR DAMAGES THAT EXCEED THE PURCHASE
PRICE OF THE PRODUCT.
SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO THE PURCHASER.
This limited warranty gives you specific legal rights and you may also have other rights which vary from jurisdiction to
jurisdiction. The provisions of the United Nations Convention on Contracts for the Sales of Goods shall not apply to this
limited warranty or the sale of products covered by this limited warranty.
Distributed By:
Well Traveled Living
716 S 8th Street
Amelia Island, FL 32034
Toll Free: 866-WTL-SUPP
(866-985-7877)
Web: www wtliving com
Email: [e-mail]
***IMPORTANT NOTICE***
-Do NOT return to place of purchase-
For customer service and warranty issues
contact our Customer Service Center at:
(866)-985-7877 OR
Email: [email protected]
Customer Service Hours: Mon. –Fri. 9:00 a.m. –6:00 p.m. (EST)
Fire Sense®, Mojave Sun ®, and Well Traveled Living® are registered trademarks of Well Traveled Imports, Inc®. All assembly instruction presentations are the
property of Well Traveled Imports, Inc.® and are protected by U.S. copyrights and trademarks. All rights reserved.
16