Fit&Fun 11-2W-023 User guide

© 2017 FIT AND FUN PLAYSCAPES, LLC 1 of 3
APPLICATION INSTRUCTIONS
FOR THE
DOLPHIN HOPSCOTCH
Product Number: 11-2W-023
SIZE: approximately 10 feet long x 4 feet wide.
ESTIMATED PAINT TIME: approximately 1 – 2 people
for 2 – 4 hours.
FIRST READ:Completely read “General Instructions”.
Prepare surfaces as recommended before painting.
1. Place STENCIL A as shown in desired location. Paint, and repeat 1-2 more times to
achieve desired vividness, drying after each application, and remove STENCIL.
2. Align STENCIL B as shown below, lining up body and alignment holes. Paint and repeat
1-2 more times to achieve desired vividness, drying after each application, and then
remove STENCIL. Painted stencil should appear as below right.

© 2017 FIT AND FUN PLAYSCAPES, LLC 2 of 3
3. Place insert from STENCIL A over completely dried top portion of painted STENCIL A as
shown below, left. Paint curved shapes, eyes and blow hole. Repeat 1-2 more times to
achieve desired vividness, drying after each application, and then remove STENCIL.
Painted stencil should appear as below right.
4. Place insert from STENCIL B over completely dried bottom portion of painted
STENCIL B as shown below, left. Paint curved shapes. Repeat 1-2 more times to achieve
desired vividness, drying after each application, and then remove STENCIL. Painted
stencil should appear as below right.

© 2017 FIT AND FUN PLAYSCAPES, LLC 3 of 3
5. Place individual numbered shapes over completely dried painted STENCIL as
shown below, left. Paint numbers. Repeat 1-2 more times to achieve desired vividness,
drying after each application, and then removing each STENCIL piece. Completed,
painted stencil should appear as below right. The stencil is complete as shown below
to the right. Allow all paint to dry for a minimum of 24 hours.
Any questions? We’re here to help – call us at [phone]!
THIS INFORMATION IS COPYRIGHT MATERIAL. ALL RIGHTS ARE RESERVED.
© 2017 FIT AND FUN PLAYSCAPES, LLC