Flywheel FLY FIERCE User manual

FLY FIERCE CYCLING SHOES

2
FLY FIERCE CYCLING SHOES
TABLE OF
CONTENTS
Maintenance 3
Limited Warranty 3
Overview 4
Tightening the Cleat 5
Positioning the Cleat 6
Clipping In and Out 7
Contact 8

3
FLY FIERCE CYCLING SHOES
LIMITED WARRANTY
The warranty of this product under normal usage against
defects in workmanship and materials to the original
purchaser for six months from purchase date.
1. Pedals are warranted for use by an individual rider only.
Use by multiple riders, or in a fitness center will void warranty.
2. This warranty does not cover any incidental or
consequential damages, such as personal injury or any other
losses due to accident, neglect, misuse, abuse, modification,
normal wear and tear, improper assembly or maintenance.
3. When returning a defective product for warranty purposes,
the claimant must provide proof of purchase and a written
description of damages.
4. There are no other warranties implied except this
express limited warranty.
MAINTENANCE
1. To function properly, pedals and cleats must
be kept free of debris and reasonably clean.
2. If pedals have exposed binding springs,
lightly lubricate springs occasionally.
3. Minimize walking in cleated shoes as
this accelerates wear.
4. Occasional lubrication of cleat bolts
will help prevent rust and seizure.
5. To avoid metal fatigue, replace
pedals every six months.

4
FLY FIERCE CYCLING SHOES
OVERVIEW
CLEATS
The cleats are LOOK Delta compatible
with a 9-degree float for use with the
FLY Anywhere bike pedals.
SHOES
The shoes are made up of composition
leather mesh cutouts to allow
for breathability.
The OrthoLite insoles are removable
and washable.
Note:
• The FLY Anywhere bike pedals do
not support SPD cleats.
4mm Allen key
Cleat washer
Cleat bolts
Cleat

5
FLY FIERCE CYCLING SHOES
TIGHTENING
THE CLEAT
When clipped in and pedaling, the cleat
should remain firmly in place relative to
the shoe. If the cleats are loose, you can
tighten them with the provided 4mm
Allen key.
You’ll need to tighten your shoe cleats
if they arrived loose, or If you loosened
them to adjust their position.
• Turn the cleat washers
counterclockwise to tighten.
• Turn the cleat washers clockwise
to loosen
Note:
• Tighten cleats firmly, but avoid
excessive force. Recommended
torque is 5-8 Nm (50-80 kgf/cm).
4mm Allen key
Cleat washer
Cleat bolts
Cleat

6
FLY FIERCE CYCLING SHOES
POSITIONING
THE CLEAT
When the cleat is loose, you can adjust
its position to fit your preference.
With the narrower end facing the toe of
the shoe, the lateral center line of the cleat
should be aligned with the center of the
ball of the shoe.
• Adjust vertically via slots in shoe sole
• Adjust horizontally via play between cleat
washer and cleat
When clipped in to the bike pedals, the
ball of your foot should be aligned with
the center of the pedal axle.
Note:
• Finding your optimal cleat setup may take
some time and experimentation over
the course of your first couple of rides.
• Left and right cleats are identical.
Adjust cleat horizontally
and vertically

7
FLY FIERCE CYCLING SHOES
CIPPING
IN AND OUT
CLIP IN
Sit on or stand over your bike with one foot
firmly on the ground. Find the U-shaped
side of the pedal, then slide the ball of your
foot down while dropping your heel until
you hear a click (1).
CLIP OUT
With your hand on the Torq Knob,
swing your heel away from the bike (2).
1
2

FLYWHEELSPORTS.COM
CONTACT
Web: www.flywheelsports.com
Email: help@flywheelsports.com
Phone: [phone]
©2017 Flywheel Sports, Inc.