Forever Redwood RORY'S BIG PLAYGROUND SWING SET User manual

ASSEMBLY INSTRUCTIONS FOR THE
RORY´S BIG PLAYGROUND
SWING SET
866.332.2403 (TOLL FREE); 7am –7pm Pacific Time, Monday-Saturday

P| 1
RORY’S BIG PLAYGROUND SWING SET
www.ForeverRedwood.com
CONTENT OF BOXES
No.
1
2
3
4
5
6
Drawing
Description
Frame Legs
Lower Main Support
Main Structural Timber
Connector Timbers
Knee Braces
Wooden Seats
Qty.
2
2
1
4
2
2
Note: Part numbers in the Content of Boxes Table are for reference only. These do not match to the numbers marked on the parts sent.

P| 2
RORY’S BIG PLAYGROUND SWING SET
www.ForeverRedwood.com
HARDWARE LIST
No.
A
B
C
D
E
F
G
H
Drawing
Description
3/8´´ X 10 Bolts
(To attach frame legs / To attach frame legs to
main structural timber / To attach knee brace to
main structural timber.)
3/8´´ X 6 ½´´ Bolts
(To frame legs)
3/8´´ X 12 ´´ Bolts
(To attach main structural timber to frame legs)
3/8´´ X 7´´ Bolts
(To attach connectors timbers to frame legs)
5/16´´ X 5´´ Bolts
(To attach knee brace to frame legs)
Chains
(To wooden seats and hangers)
Springs
(To hangers and chains)
Quick Links
(To hangers, wooden seats and chains)
Note: Dimensions of your hardware will vary depending on size.

P| 3
RORY’S BIG PLAYGROUND SWING SET
www.ForeverRedwood.com
No
1
2
3
4
5
6
DESCRIPTION
Frame Legs
Lower Main Support
Main Structural Timber
Connector Timbers
Knee Braces
Wooden Seats
Note: Part numbers in the Drawing are for reference only. These do not match to the numbers marked on the parts sent.

P| 4
RORY’S BIG PLAYGROUND SWING SET
www.ForeverRedwood.com
Note: The structure must be assembled on its side, as shown.
Step 1: Open the frame legs (1) as shown. Each part has a series of numbers that indicate where to attach the part with the
corresponding number.
Separate
1
1

P| 5
RORY’S BIG PLAYGROUND SWING SET
www.ForeverRedwood.com
Step 2: Pull out the cross support and line up to match the predrilled hole. After that, use 3/8´´ X 10´´ Bolts (A) with washer and
nut to secure in place.
Step 3: Use 3/8´´ X 10´´ Bolts (A) with washer and nut to attach the lower main support (2) to the frame legs. Each part has a
series of numbers that indicate where to attach the part with the corresponding number.
3/8´´ X 10 Bolts
3/8´´ X 10 Bolts
2
2

P| 6
RORY’S BIG PLAYGROUND SWING SET
www.ForeverRedwood.com
Step 4: Put the 3/8´´ x 6 ½´´ bolts (B) with washer and nut as shown. Each part has a series of numbers that indicate where to
attach the part with the corresponding number.
Step 5: Place the frame legs in their site. Each part has a series of numbers that indicate where to attach the part with the
corresponding number.
3/8´´ X 6 ½´´ Bolts

P| 7
RORY’S BIG PLAYGROUND SWING SET
www.ForeverRedwood.com
Step 6: Put the Quick Links (H) and the Springs (G) in the hangers. After that, put the chains (F). Take a few minutes to adjust
the chain height to your preference. Each part has a series of numbers that indicate where to attach the part with the corresponding
number.
Step 7: Attach the main structural timber (3) to the frames legs with 3/8´´ X 12´´ bolts (C) with washer and nut. Each part has a
series of numbers that indicate where to attach the part with the corresponding number.
3/8´´ X 6 ½´´ Bolts
3
3
Quick Link

P| 8
RORY’S BIG PLAYGROUND SWING SET
www.ForeverRedwood.com
Step 8: Pull out the cross supports and line up to match the predrilled hole. After that, use 3/8´´ X 10´´ Bolts (A) with washer and
nut to attach.
3/8´´ X 10´´ Bolts
3/8´´ X 10´´ Bolts

P| 9
RORY’S BIG PLAYGROUND SWING SET
www.ForeverRedwood.com
Step 9: Attach the connector timbers (4) to reinforce the connection between the frame legs and the main structural timber. Use
3/8´´ x 7´´ bolts (D) with washer and nut to attach. Each part has a series of numbers that indicate where to attach the part with
the corresponding number.
Step 10: Attach the knee braces (5) to the main structural timber with 3/8´´ x 10´´ bolts (A) and to the frames legs with
5/16´´ x 5´´ bolts (E). Don’t forget washers and nuts. Each part has a series of numbers that indicate where to attach the part
with the corresponding number.
4
3/8´´ X 7´´ Bolts
3/8´´ X 10´´ Bolts
5
5/16´´ X 5´´ Bolts

P| 10
RORY’S BIG PLAYGROUND SWING SET
www.ForeverRedwood.com
Step 11: Use quick links (H) to joining the wooden seats to the chains (F). Each part has a series of numbers that indicate where
to attach the part with the corresponding number.
Step 12: Finally, with a couple of people helping, turn the swing right side up.
6
6
Quick Link

P| 11
RORY’S BIG PLAYGROUND SWING SET
www.ForeverRedwood.com
This completes the Playground Swing Set assembly. Hope you enjoy your set for many decades. If you ever have a problem or a
question, don't hesitate to call us (866 332 2403) or email us. We are here to support you.