Disclaimer and Warning
Congratulations on purchasing your new product. Please read this entire
document carefully. Failure to read or follow instructions and warnings in this
document may result in damage to your product. Disassemble the gimbal camera
by user is not permitted, as which may cause the camera does not work
normally.
We accepts no liability for damage, injury or any legal responsibility incurred
directly or indirectly from the use of this project. The user shall observe safe and
lawful practices including, but no limited to, those set forth in the manual.
Legends
Important NoteWarning
Precautions
1. Please keep the camera in a dry environment to avoid fogging of the lens due to
excessive humidity. If the lens is foggy, turn it on for a while and wait for the fog to
dissipate.
2. The camera uses an infrared thermal imaging lens, please do not aim it at strong
energy sources, such as the sun, laser beams, lava, etc. The temperature of the
object observed by the lens must be less than 800°C, otherwise the camera will be
burned and irreversible damage will be caused.
3. When cleaning the camera lens, be sure to use a soft and dry cleaning cloth to wipe
the lens surface.
4. Do not touch the coating on the surface of the infrared lens directly with your hands
or with hard objects, otherwise the coating will be damaged and the image will be
blurred.
01
