Frontier 4FT User manual

NOTE: If any parts are missing or damaged, or if you have any questions, please send an email
to [email protected]
4FT Instruction manual
CAUTION:
Read and follow all Safety Rules and Operating instructions before first use of this product
Notice: Picture shown is for illustration purpose only and may differ from the actual product.

Adjustable feet
4x A
Leg
1x B
Leg with power strip
1x C
Beam
2x D
Rubber wood top
1x E
NOTE: If any parts are missing or damaged, or if you have any questions, please send an email
to [email protected]
KEY PARTS DIAGRAM

NOTE: If any parts are missing or damaged, or if you have any questions, please send an email
to [email protected]
1x H
8x G
48x F
NEEDED TOOLS
1x I
KEY PARTS DIAGRAM
Seller does not provide the above tools
CAUTION
M8x20
Inner hexagonal flat head bolt
M5x15
Cross head tapping screw
PH2x75mm S6 Inner hexagonal wrench

NOTE: If any parts are missing or damaged, or if you have any questions, please send an email
to [email protected]
B1
Leg
A 4
Adjustable feet
C1
Leg with power strip
Number Name Quantity
G8
D 2
Beam
I1
Number Name Quantity
Self provided S6 Inner hexagonal wrench
Inside hexagonal bolt
Do not lock bolts
Caution
ASSEMBLY

Distributed by: XDD products (USA).LLC
NOTE: If any parts are missing or damaged, or if you have any questions, please send an email
to [email protected]
F48
E 1
Rubber wood top
I1
Number Name Quantity
Self provided
Appress the edges of the assembled legs
to the inside of the label on the bottom of
the rubber wood, to determine the location
of the mounting hole, then install, and
finally tighten all the screws
Note
ASSEMBLY
M5x15 Cross head
tapping screw
Ph2x75mm