FrSky SkyVision HD User manual
How to access the Menu:
- Long press the up button, enter the menu
- Short press the up and down button to select the menu target
- Short press the middle button to confirm
How to record video:
- You can set AUTO/Manual record in the menu
1. Auto record. Select “AUTO” in the menu option “Record Mode”. In this mode, the Skyvision starts recording when it turns on.
2. Select “Manual” in the menu option “Record Mode”. In display mode, long press the middle button to start recording, long press
middle button again to stop recording.
How to select different signal channels:
- In display mode, press up and down button to switch the current signal channel
Play Back: playback the previous video
Fast User Manual
Add: F-4,Building C, Zhongxiu Technology Park, No.3 Yuanxi Road, Wuxi, 214125, Jiangsu, China Technical Support: [email protected]
OSD
CH:R2
43
152
Signal channel: F2-5760MHz F4-5800MHz
R1-5658MHz R2-5695MHz R3-5732MHz R4-5769MHz
R5-5806MHz R6-5843MHz R7-5880MHz R8-5917MHz
Current Signal channel. Short press up and down button to switch the
current signal channel.
Record status. When insert SD card to start recording, the status light will
be red and flash, that means TF is in record mode.
Current signal intensity. The max is 8, the min is 0.
Antenna 1 received signal strength.
Antenna 2 received signal strength.
1
2
3
4
5
User Manual 01140218
Menu functions
System Settings
Playback
Record Mode
Format SD-Card
About
User Manual
Exit
No SD Card!
Auto
Long press the up button to enter the menu
1
2
3
4
6
5
1
2
3
4
5
6
Playback: playback the previous video.
RecordMode:
Auto: Auto record. It starts recording when get video signal. If no video
signal, it stops recording.
Manual: Manual record. Long press the middle button to start recording.
Format SD-Card: Format SD card.
About: About this Skyvision info and version info.
User manual: Easy user manual.
Exit: Exit.
Port definition
VTX upgrade port
3
1/4 screw
1
SD card slot
2
5.5 inch TFT
6
5.8G antenna port
5
5.8G antenna port
4
XT30 battery input (7V-26V)
9
DC input (7V-26V)
7
Power button
8
System load LED
12
Cooling fan
11
HDMI out
10
Power LED
15
RF signal intensity LED
13
Program flash LED
14
Confirm button
17
Down button
18
Up button (long press to access the menu)
16
3
6
8
9
7
10
1
4 5
211
12 13 14 15
16
17
18
Add: F-4,Building C, Zhongxiu Technology Park, No.3 Yuanxi Road, Wuxi, 214125, Jiangsu, China Technical Support: [email protected]
功能菜单
长按“上键”进入设置菜单
Playback：存放录像文件，进入可查看录制的视频文件。
RecordMode：
Auto：自动录像，在有图像时，会自动录像。无图像时，自动停止。
Manual：手动录像，长按中间的按键手动录像。
Format SD-Card：格式化 SD 卡。
About：显示本机信息和版本信息
User Manual：简易使用说明书
Exit：退出
1
2
3
4
5
6
快速使用说明
如何进入菜单
- 长按上键 进入菜单界面
- 短按上下键选择菜单目标
- 短按中间键确认
如何录像
- 可在菜单中设置自动录像或者手动录像
1. 自动录像，可在菜单选项 record mode 中选择AUTO 。此模式下skyvision 设备开机即可开始录像
2. 在菜单选项 record mode 中选择 manual。在显示模式下，长按中间键开始录像，再次长按中间键停止录像。
如何选择不同的信号通道
- 在显示模式下，按上下键切换当前信号接收通道
play back ：可以对之前录像的视频进行回放
小飞侠使用说明书 01140218
OSD
频点：F2-5760MHz F4-5800MHz
R1-5658MHz R2-5695MHz R3-5732MHz R4-5769MHz
R5-5806MHz R6-5843MHz R7-5880MHz R8-5917MHz
43
152
1
2
显示当前通道，可通过短按上下功能键按钮对CH 号进行切换
卡录显示，当插入SD 卡开始录像时，该标志会变成红色并闪烁，代表
TF进入录像状态
信号质量，最高为8 最低为0
1号天线接收效率
2号天线接收效率
3
4
5
CH:R2
43
152
System Settings
Playback
Record Mode
Format SD-Card
About
User Manual
Exit
No SD Card!
Auto
1
2
3
4
6
5
VTX升级接口
3
1/4固定孔
1
SD卡槽
2
5.5英寸TFT
6
DC电源输入口 (7V-26V)
7
5.8G天线接口
5
5.8G天线接口
4
HDMI输出口
10
电源按钮
8
XT30电源输入口 (7V-26V)
9
射频信号强度指示灯
13
系统加载指示灯
12
散热风扇
11
功能键“上”(长按进入菜单)
16
程序烧录指示灯
14
电源指示灯
15
功能键“下”
18
功能键“确定”
17
基础功能
3
6
8
9
7
10
1
4 5
211
12 13 14 15
16
17
18
Other FrSky Drone & Quadcopter Accessories manuals
