GB-Models Zlin 137T User manual
www.modellmarkt24.ch; www.modellmarkt24.de
!
Zlin 137T
Introduction 3
Specifications: 3
Required equipment: 3
Additional required items, tools and adhesives 3
Warning: 3
Before starting assembly 4
Warranty information 4
Wing - middle section 5
Wing - outside section, 2x 7
Elevator 12
Fuselage 15
Rudder 15
Towing clutch 20
Engine 21
Back window 23
Landing gear 23
RC-fuselage 25
Notes before flying 26
Control Throws 26
Mixing 26
Center of Gravity 26
Range test your radio 26
!2
www.gb-models.com
www.modellmarkt24.ch; www.modellmarkt24.de
www.modellmarkt24.ch; www.modellmarkt24.de
!
Zlin 137T
Introduction
Thank you very much for choosing the GB-Models Zlin 137T we wish you many happy flights with
it.
This is a short building instruction which is going to help you to construct this plane easily.
Specifications:
Wingspan: ……………..2,7m
Weight:…………………11,5 kg
Required equipment:
•10 Channel Radio System - for example Jeti DC 16 and Central Box 200
•1x Hitec HS-7954SH (elevator)
•7x Hitec HS 5496MH
•1x Hitec HS 5585MH (towing clutch)
•Axi 5360/18
•Jeti Mezon 135 opto
•Fiala 28x12
•12S 5000mAh
Additional required items, tools and adhesives
•Drill and Drill Bits
•Sharp Hobby Knife
•Masking Tape
•Paper Towels
•Rubbing Alcohol
•Sand Paper
•Soldering Iron
•Synthetic Oil
•Shrink Tube
•Servo Extensions
•Medium and Thin CA
•PU Glue
Warning:
This RC aircraft is not a toy!
If misused, it can cause serious injuries.
Only fly in open areas, preferably on an official flying site. Follow all the instructions, including
those of your radio and motor.
!3
www.gb-models.com
www.modellmarkt24.ch; www.modellmarkt24.de
www.modellmarkt24.ch; www.modellmarkt24.de
!
Zlin 137T
This plane is designed as a towing airplane or for scale flying only. It is not a racer.
It is built with a very light structure and for this reason we recommend:
Do NOT fly your Zlin 137T at very high speed! This may cause structural failures or flutter due to
the extremely large control surfaces.
Before starting assembly
Remove each part from its bag and protection for prior inspection. Closely inspect all parts and
searching for possible damages. If you find any damages or if there are any missing parts, contact
the place of purchase.
If you find any wrinkles in the covering, use a feat gun or covering iron to remove them. Use
caution while working around areas where the to covering material overlap to prevent separating in
covers.
Warranty information
GB-Models guarantees this kit to be free from defects in both material and workmanship at the
date of purchase.
This warranty does not cover any parts damaged by use or modification and in no case shall GB-
Models liability exceed the original cost of the purchased kit. Further, GB-Models reserves the right
to change or modify this warranty without notice. GB-Models can not control what material is used
and if the plane is built in a proper way. By the act of using this product, the user accepts all
resulting liability.
If the buyer is not prepared to accept the liability associated with the use of this product, the buyer
is advised to return this kit immediately in new and unused condition to the place of purchase.
!4
www.gb-models.com
www.modellmarkt24.ch; www.modellmarkt24.de
Table of contents
Popular Toy manuals by other brands
Zapf Creation
Zapf Creation Baby Annabell 794982 Assembly instructions
Twoey Toys
Twoey Toys Big Book Stroller 1150 Aassembly Instructions
Oxy Heli
Oxy Heli OXY3 SPEED instruction manual
Faller
Faller HOT AIR BALLOON manual
LEGO
LEGO 9396 instructions
Badger Basket
Badger Basket 66109 Assembly and use instructions