Generic AK-RY011S User manual

The Multifunctional Baby Rocker Instruction
To make sure how to use the baby rocker,please read
the instruction very carefully,keep it safe for future
reference.If you do not follow the instruction to use
rocker,may affect your chilren’s safety.if you assign
the rocker,please assign this instruction together.
ILLUSTRATION ARE REFERENCE ONLY.
DESIGN AND STYLE MAY VARY.
360 degrees rotation
Available for sit status and sleeping status
Interchangeable for sit status and sleeping status
Detachable music vibration
Adjustable backrest

12
①
②3
Instruction&tool kit
user guide and
spare parts
LR
Backrest Adjustable
Set Parts*1
Link tube
set parts*1
front side tube*1 fabric cover*1
Canopy*1 Rocker*1 Stopper At Left
&Right Side*2 Vibration music
1.OPEN CARTON: Please make sure that all needed parts are in the
carton.
3.ASSEMBLE AND DISASSEMBLE LINK TUBES PARTS: :See
pics 3,Put link tubes parts into the center hole of rocker’s base.
the assembly is finished when you hear “click” sound. Press down
the buttons,pull it out from the stoppers to disassemble it.
2.ASSEMBLE AND DISASSEMBLE STOPPER PARTS: See pics①,
put stopper into rocker’s slot,as pics②instruction,the assembly is
finished when you hear “click” sound,means the springs pop up.
Press down the springs,pull it out from the stoppers to disassemble it.
(Warning:The stopper have left side and right side,please don’t
mix it.otherwise,you’re not able to assemble it).
stopper parts
stopper
slot
rocking pole
associates
rocking pole
associates
link tubes parts
disassemble button

4
5
6a 6b 6c
5.ASSEMBLE AND DISASSEMBLE FRONT TUBES PARTS:See
pics 5,Put the front tubes into the slots as arrow indication, the
assembly is finished when you hear “click” sound,means the
springs pop up. Press down the springs,
pull it out from the backrest adjust parts to disassemble it.
6.ASSEMBLE AND DISASSEMBLE FABRIC COVER: ①See pics 6a,
Put the fabric cover on the rocker’s frame,to assemble it.(Attention:
Don’t assemble it at wrong direction,the safety buckle and front tubes
should be at same direction).
②See pics 6b,use zipper to zip up these fabrics cover around
adjusting button.
③See pics 6c, use zipper to zip up these fabrics cover around
front tube.
4.ASSEMBLE AND DISASSEMBLE BACKREST ADJUST PARTS:
See pics 4,Put backrest adjust parts into link tubes parts,follow up
the arrow indication to insert it inside, the assembly is finished
when you hear “click” sound,means the springs pop up. Press
down the springs,pull it out from the backrest adjust parts to
disassemble it.
link tubes parts
safety buckle
front tubes parts
one hand adjust button
backrest adjust parts
backrest adjust parts
front tubes
parts

7a 7b
9a
9b 9c 9
8
8.Install/detach music vibration: Install the music vibration on the seat
cover shown in picture 8 above. Pull up the music vibration for detaching.
9.3-point safety belt usuage: When the baby use the safety belt as
picture 9 shown, let A connect C by going through B. And B should be
between the baby's two legs(in the crotch). Part A and part B should be
around the baby waist, adjust the
safety belt legnth to the proper one. When you hear the sound "click",
that means the safety button is locked.
Warning: Donnot use the damaged safety belt. When you using the
rocker, make sure to use the safety belt. When the safety belt is too
long, it will lose the protection function.
7.ASSEMBLE AND DISASSEMBLE CANOPY: ①See pics 7a,Put
canopy’s clamp into slot of canopy’s base,follow up arrow indication to
insert it, the assembly is finished when you hear “click” sound.
Press down locks hook at canopy’s clamp,pull it out,to disassemble
canopy.
②See pics 7b,Zip up the two side zipper at canopy to assemble canopy,
to zip out
the zipper to disassemble canopy.
lock hook canopy clamp
canopy base
music vibration
canopy

10 11
10.Rocker 360 degree rotation: Shown in picture 10, put the rocker
on the ground, one hand holds the rocking pole associates, the other
hand turn the front foot pipe around.
11.Fixation/swing shift: ①rocker fixation: When you need the rocker
fixation function, move the 4 feet associates to the lowerest point(4
feet stand on the ground).
②rocker swing: move the 4 feet associates to highest point for the
function of swing.
①
12
②
12.Seat cover/sleeping cot shift: ①Seat cover status: lock the safety
buckle under the seat cover, meanwhile, adjust the one hand button to
the highest level shown in picture ①.
Sleeping cot status: Adjust the back rest associates to the level position,
release the safety button, and adjust the back rest associates to the
lowest level to achieve the sleeping cot function.
Warning: when using the sleeping cot function, make sure that the
back rest adjustable associates is at the level position.
feet associates
safety buckle
one hand
adjust button
back rest
associates
safety button

日常保养
Please strictly comply with the following points to avoid the accident happens.
When the baby is in the rocker, do not lift the rocker up.
Do not use the rocker in steep slope, stairs, electrical elevator, sand, uneven
road and clay.
Do not let baby stand on the rocker.
Each rocker can only be used by one baby. Baby must sleep in the seat cover.
Warning: Always use safety belt to avoid accident.
Warning: Never leave your child unattended.
Warning: This rocker is NOT suitable for the usage of long time sleeping.
Warning: This rocker cannot take place of the usage of baby playpen.
If baby needs sleeping, please buy the proper baby playpen or bed.
Warning: Once the baby can sit, do not use the rocker any more.
Warning: To avoid accident, do not use the accessories which are not
supplied or approved by the manufacturer.
Warning: Do not use the rocker any more when any part of it is missing or
damaged.
Warning: When use the canopy on the rocker, do not move the rocker
by lifting the canopy. Throw away the plastic bag to avoid suffocation after
your child put it on his head. Check the screw, nut and bolt regularly.
Maximum load is 9kg.
Suitable for babies before their sitting stage.
Meet with EN12790-2009 standard.
KEEP AWAY FROM FIRE!
Maintenance
Using brush to clean canopy/fabric cover and rocker frame, then dry them
naturally in the cool area. For the dirty parts, please use diluted detergent
to wash them, then wipe the detergent including the dust, and then use a
damp cloth to clean the rocker frame. Wipe the rocker frame with a dry cloth.
If not dry, the rocker frame will be aging black.
Do not use bleacher. Put the cushion in the dark place to dry in the shade.
Do not use dryer to dry it.
Do not let the rocker in direct sunlight. Otherwise, the plastic and fabric parts
will fade.
If the back rest soft goods is damaged, do not use it any more and contact
the customer service department.
There is no notice due to the improvement of products, design and
specifications.
The pictures in the instructions are just for reference. They may not represent
the actual product.
WARNING