George Home Wooden tree house User manual

Step 1
Attach the two
side panels (A
& B) to the back
panel (C) using two
small screws (O)
and a cross head
screwdriver.
Step 2
Attach the roof
(D) to the side
panels using two
small screws (O)
and a cross head
screwdriver.
Step 3
Attach the front
of the roof (E) to
the assembled
sections using two
small screws (O)
and a cross head
screwdriver.
Step 4
Slot the two
sections of the tree
(F& G) together as
shown.
Slot one of the
supports (H) on the
outer branch of the
tree.
Cross head / Philips
screwdrivers suitable for
use with the screws and
bolts provided.
You will need...
1. Unpack the
components and
check against the
list below.
2. Place the
components on
a clean surface
to prevent them
from being
damaged.
3. After you have
assembled your
toy, dispose of all
packaging.
Getting started...
A x1
B x1
C x1
D x1
E x1
F x1
I x1
H x2
G x1
J x1
K x1
L x1
M x1
N x1
P x3
O x6
You will have...
A
D
B
E
F
G
H
C
O
O
O
Wooden tree house
Assembly Guide
IMPORTANT: RETAIN FOR FUTURE REFERENCE
WARNINGS:
• IMPORTANT SAFETY INSTRUCTIONS
• PLEASE READ ALL INSTRUCTIONS CAREFULLY
BEFORE USE AND RETAIN FOR FUTURE
REFERENCE.
• Adult assembly required.
• The hardware contains small screws with sharp points.
Keep unassembled parts out of the reach of small
children.
• WARNING! Not suitable for children under the age of 36
months. Components of this product may break off into
small parts presenting a choking hazard.
• Choking hazard: Unassembled parts may be a choking
hazard to children 3 years and younger.
• To avoid the danger of suffocation, keep any bags
or packaging away from babies and children. Any
packaging or bags are not part of the toy and must be
disposed of immediately before assembling the toy.
• DO NOT SIT OR STAND ON THIS TOY.
GEORGE Wooden Tree House.indd 1 11/06/2015 08:13

How to...
...care for and maintain your tree house
• Your toy is only meant to be assembled once.
• After you have assembled your toy do not dismantle it
again as this may weaken the joints and screws leaving
the toy unsafe for use.
• Regularly check that all of the screws are fully tightened
(but do not over-tighten).
• Use the toy on a flat level surface only.
• Please check the assembly of the toy regularly and
frequently tighten any screws or bolts. If regular
maintenance is not carried out the product may cease to
function properly.
Step 5
Attach the steps
(I) to the side of
the platform (J)
using one of the
long screws (P)
and across head
screwdriver.
Step 6
Slide the platform
onto the longest
branch of the tree.
Ensure the tabs
on the support
slot into the slots
in the bottom of
the platform.
Step 7
Fasten the platform
to the tree using
two long screws
(P) as shown in the
diagram.
Step 8
Slot the remaining
support (H) onto the
smaller branch as
shown in the diagram.
x1 x1
x1
Now you have finished the assembly of your tree house,
check all of the screws are tightened. You can now
place the house on the large platform and play with the
accessories.
Step 9
Slot the smaller
platform (K)
onto the smaller
branch. Ensure
the lugs on the
support slot into
the grooves in
the underside of
the platform.
Step 10
Slot top (L) of the tree
onto the top branch
of the assembled
sections.
Customer services
information
If you require further information, or
advice regarding your product, or if
you are experiencing any problems,
please contact customer services at
the telephone number or address
shown opposite. N.B. When calling
or writing please quote the product
name.
Call
0800 952 0101
Write
Asda Stores Ltd.
Asda House, Southbank, Great Wilson
Street,
Leeds, LS11 5AD
Product name:
Wooden Tree House
There are many more wooden role-
play toys to purchase and enjoy
Step 12
Attach elastic loops
on the seat (N) to
the hook on the
rope.
Step 11
Slot the see-
saw (M) onto
the bottom of
the assembled
sections as shown
on the diagram.
IK
J
L
M
N
P
P
H
GEORGE Wooden Tree House.indd 2 11/06/2015 08:13