Global 350 AUT SERIES Parts list manual

350 AUT SERIES
SINGLE NEEDLE DIRECT DRIVE LOCKSTITCH
MACHINE WITH THREAD TRIMMER
INSTRUCTION / OPERATING MANUAL
PARTS MANUAL

Thank you very much for buying a GLOBAL sewing machine.
Before using your new machine, please read the safety instructions.
With industrial sewing machines, it is normal to carry out work while positioned directly in front of
moving parts such as the needle and thread take-up，and consequently there is always a danger of
injury that can be caused by these parts. follow the instructions from training personnel and
instructors regarding safe and operation before operating the machine so that you will know how to
use it correctly.
SAFETY INSTRUCTIONS
This instruction manual and the indications and symbols that are used on the machine itself are
provided in order to ensure safe operation of this machine and to prevent accidents and injury to
yourself or other people
Indications
DANGER
The instructions which follow this term indicate situations where failure to follow the instructions
will almost certainly result in death or severe injury.
DANGER .
The instructions which follow this term indicate situations where failure to follow the instructions
could injury when using the machine or physical damage to equipment and surroundings.
Symbols
This symbol indicates something that you should be careful of. the picture inside the triangle
indicates the nature of the caution that must be taken.(for example, the symbol at left means“beware
of injury”.)
This symbol indicates something that you must not do.
This symbol indicates something that you must do. the picture inside the circle indicates the
nature of the thing that must be done.(for example, the symbol at left means“you must make the
ground connection”.)
[2]. Notes on safety
Wait at least 5 minutes after turning off the power switch and disconnect the power cord from
the wall outlet before opening the face plate of the control box. Touching areas where high voltages
are present can result in severe injury.
i

Environmental requirements
The relative humidity should be within the range of 45 % to 85 % during use, and no dew formation
should occur in any devices. Excessively dry or humid environments and dew formation may cause
problems with correct operation.
Avoid exposure to direct sunlight during use. Exposure to direct sunlight may cause problems with
correct operation.
In the event of an electrical storm, turn off the power and disconnect the power cord from the wall
outlet .lightning may cause problems with correct operation.
Installation
Machine installation should only be carried out by a qualified technician.
Do not connect the power cord until installation is complete. The machine may operate
if the treadle is depressed by mistake, which could result in injury.
Be sure to wear protective goggles and gloves when handling the lubricating oil and grease, so
that they do not get into your eyes or onto your skin, otherwise inflammation can result.
Furthermore, do not drink the oil or eat the grease under any circumstances, as they can cause
vomiting and diarrhea. Keep the oil out of the reach of children.
The sewing machine weighs more than 48 Kg. the installation should be carried out by two or
more people.
Turn off the power switch before inserting or removing the plug, otherwise damage to the
control box could result.
If using a work table which has casters, the casters should be secured in such a way so that
they cannot move.
Use both hands to hold the machine head when tilting it back or returning it to its original
position. If only one hand is used, the weight of the machine head may cause your hand to slip, and
your hand may get caught.
When securing the cords, do not bend the cords excessively or fasten them too hard with
staples, otherwise there is the danger that fire or electric shocks could occur.
ii

Sewing
This sewing machine should only be used by operators who have received the necessary training in
safe use beforehand.
This sewing machine should not be used by any applications other than sewing.
Be sure to wear protective goggles when using the machine. if goggles are not worn, there is the
danger that if a needle breaks, parts of the broken needle may enter your eyes and injury may result.
If using a work table which has casters should be secured in such a way so that they cannot move.
At first operate the machine, should carry on low speed to whet to match an operation for 20
days.(3500 r/min)
If an error occurs in machine, or if abnormal noises or smells are noticed, immediately turn off the
power switch. Then contact your nearest GLOBAL dealer or a qualified technician.
If the machine develops a problem, contact your nearest GLOBAL dealer or a qualified technician.
Turn off the power switch at the following times. The machine may operate if the treadle is
depressed by mistake, which could result in injury. 1. when threading the needle . 2. when replacing
the bobble and needle. 3. when not using the machine and when leaving the machine unattended.
Attach all safety devices before using the sewing machine. If the machine is used without these
devices attached, injury may result.
Do not touch any of the moving parts or press any objects against the machine while sewing, as this
may result in personal injury or damage to the machine.
Use both hands to hold the machine head when tilting it back or returning it to its original position. If
only one hand is used, the weight of the machine head may cause your hand to slip, and your hand
may get caught.
Cleaning
Turn off the power switch before carrying out cleaning. The machine may operate if the treadle is
depressed by mistake, which could result in injury.
Use both hands to hold the machine head when tilting it back or returning it to its original position. If
only one hand is used, the weight of the machine head may cause your hand to slip, and your hand
may get caught.
Be sure to wear protective goggles and gloves when handling the lubricating oil and grease ,so that
they do not get into your eyes or onto your skin, otherwise inflammation can result. Furthermore,
do not drink the oil or eat the grease under any circumstances, as they can cause vomiting and
diarrhea. Keep the oil out of the reach of children.
Use only the proper replacement parts as specified by GLOBAL.
iii

Maintenance and inspection
Maintenance and inspection of the sewing machine should only be carried out by a qualified
technician.
Any problem in machine operation which result from unauthorized modifications to the machine
will not be covered by the warranty.
Turn off the power switch and disconnect the power cord from the wall outlet at following times,
otherwise the machine may operate if the treadle is depressed by mistake, which could result in
injury. 1. when carrying out inspection, adjustment and maintenance. 2. when replacing consumable
parts such as the rotary hook.
If the power switch needs to be left on when carrying out some adjustment, be extremely careful to
observe all safety precautions.
Use both hands to hold the machine head when tilting it back or returning it to its original position. If
only one hand is used, the weight of the machine head may cause your hand to slip, and your hand
may get caught.
Ask your GLOBAL dealer or a qualified electrician to carry out any maintenance and inspection of
the electrical system.
If any safety devices have been removed, be absolutely sure to reinstall them to their original
positions and check that they operate correctly before using the machine.
Use only the proper replacement parts as specified by GLOBAL
iv

[3]. Warning labels
The following warning labels appear on the machine. Please follow the instructions on the labels at
all times when using the machine .if labels have been removed or are difficult to read, please contact
your nearest GLOBAL dealer.
Safety devices
(A)Finger guard
(B)Thread take-up cover
v