Gopel Electronic G Patch 6222 User manual

G Patch 6222
Manual (Original documentation)

i
Copyright ©2021 GÖPEL electronic GmbH. All rights reserved.
The soware described in this manual as well as the manual itself are supplied under license and may be used
or copied only in accordance with the terms of the license. The customer may make one copy of the soware for
safety purposes.
The contents of the manual is subject to change without prior notice and is supplied for information only. Hardware
and soware might be modified also without prior notice due to technical progress.
In case of inaccuracies or errors appearing in this manual, GÖPEL electronic GmbH assumes no liability or respon-
sibility.
Without the prior written permission of GÖPEL electronic GmbH, no part of this documentation may be transmit-
ted, reproduced or stored in a retrieval system in any form or by any means as well as translated into other languages
(except as permitted by the license).
GÖPEL electronic GmbH is neither liable for direct damages nor consequential damages from the company’s
product applications.
GÖPEL electronic GmbH
Goeschwitzer Str. 58 / 60
D-07745 Jena
Tel.: [phone]
Fax: [phone]
E-Mail: [e-mail]
http://www.goepel.com
Version: 2.0.2 / Printed: February 21, 2022
All product and company names appearing in this manual are trade names or registered trade names of their re-
spective owners.

ii
Table 1: List of changes to this document
Date Editor Rev Comment
2021-04-07 E. Richter 2.0.0 Document created in LaTex
2021-04-30 E. Richter 2.0.1 Variants 6 - 10 added
2022-02-21 E. Richter 2.0.2 Scope of delivery of the connection cable changed to optional

Contents
1 Introduction 1
1.1 Notesonthisdocument.......................................... 1
1.2 IntendedUse................................................ 1
1.3 EMCProtectionMeasures......................................... 2
1.4 GeneralSafetyRegulations ........................................ 2
1.5 Liability and Warranty Exclusion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
1.6 SuppliedAccessories ........................................... 3
1.7 Commissioning .............................................. 3
2 Technical Description 4
2.1 ProductDescription............................................ 4
2.2 Variants................................................... 4
2.2.1 Compatibility ........................................... 4
2.2.2 CoaxVariant1........................................... 5
2.2.3 CoaxVariant2........................................... 7
2.2.4 CoaxVariante2.1 ......................................... 9
2.2.5 STPVariant1 ........................................... 11
2.2.6 STPVariant2 ........................................... 13
2.2.7 STPVariant3 ........................................... 15
2.2.8 STPVariant4 ........................................... 17
2.2.9 STPVariant5 ........................................... 19
2.2.10 STPVariant6 ........................................... 21
2.2.11 STPVariant6.1 .......................................... 23
2.2.12 STPVariant7 ........................................... 25
2.2.13 STPVariant7.1 .......................................... 27
2.2.14 STPVariant8 ........................................... 29
2.2.15 STPVariant9 ........................................... 31
2.2.16 STPVariant10........................................... 33
3 Service and Support 35
3.1 SparePartsandAccessories........................................ 35
3.2 WarrantyandRepair............................................ 35
3.2.1 Conditions............................................. 35
3.2.2 Identification ........................................... 35
4 Disposal 36
4.1 Disposal of used Electrical / Electronic Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
4.2 Disposal of used Disposable Batteries / Rechargeable Batteries . . . . . . . . . . . . . . . . . . . . 36
iii

CHAPTER 1. INTRODUCTION GÖPEL electronic GmbH
1 Introduction
1.1 Notes on this document
This document applies only to the device type G Patch 6222. Any handling of the device requires the exact knowl-
edge and observance of this manual. The operational safety and the function of the device can only be guaranteed
if both the general safety and accident prevention regulations of the legislator and the safety instructions in the
manual are observed.
The manual is part of the product. Please make sure that all persons who operate the device have read
and understood the manual. Keep the manual in a safe place so that it can be used whenever needed.
This guide highlights some important comments as follows:
Table 1.1: Symbols
Symbol Description
Warning that indicates risk situations and dangers. Disregard can lead to life-
threatening situations.
Information that indicates certain aspects or is important for a particular topic or goal.
Tip that gives useful hints or recommendations.
1.2 Intended Use
G Patch 6222 is a breakout box for easier contacting of a Video Dragon 6222 with your test object. Typical applica-
tions are (depending on the variant):.
•Contacting of Video Dragon 6222 and test object
•Supply of the test object with power
•Decoupling of MII/ Ethernet for Media Interface boards with APIX support
If you use the device for any purpose for which it is not intended, the GÖPEL electronic GmbH can not
be held liable for resulting damage.
The device is intended for indoor use only and to be used only at an ambient temperature of 0 ° C - +70 ° C. It must
not be exposed to extreme temperatures, temperature fluctuations, heating and cooling systems, direct sunlight,
high levels of dust, vibration and impact, extreme humidity or moisture.
G Patch 6222 1

CHAPTER 1. INTRODUCTION GÖPEL electronic GmbH
The device is only to be used in a technically perfect condition as well as in accordance with its intended use, in
a safety-conscious and hazard-conscious manner, observing the operating instructions! In particular, faults that
may aect safety must be rectified immediately!
1.3 EMC Protection Measures
The G Patch 6222 box complies with the electromagnetic compatibility directive (2014/30/EU).
In order to maintain electromagnetic compatibility, the system may only be operated in the delivered condition.
Mechanical and electrical modifications of any kind are not permitted. Only use suitable shielded signal and control
cables.
If the product is installed and operated in a system with other equipment, accessories and components,
the system as a whole and all its equipment, accessories and components must conform to the EMC
directives and standards. The system integrator is responsible for compliance with the EMC Directive
2014/30/EU and national EMC laws for installed systems, system accessories and system components
that have not been supplied or tested and approved by GÖPEL electronic as manufacturer of the equip-
ment.
1.4 General Safety Regulations
To avoid personal injury and / or property damage, follow these general safety instructions.
Risk of accident due to electric shock or fire
•In addition to the operating instructions, observe the legal requirements and regulations for accident pre-
vention and environmental protection of the countries in which you operate the system.
•Do not make any changes to the system without the written consent of the manufacturer.
•Never operate damaged devices or components.
•Keep liquids away from the unit and do not place any containers with liquid on the unit.
Danger of tripping or falling due to improperly laid cables
•Lay cables so that nobody can step on them or trip over them.
•Never try to stretch cables to enable a connection. The cables must always have enough clearance.
Damage caused by improper use or failure to observe the safety instructions and warnings is not covered by the
warranty. For consequential damages no liability is assumed by GÖPEL electronic!
1.5 Liability and Warranty Exclusion
The G Patch 6222 box has not been developed, tested or intended for use in safety-related applications. Do not
use the device for safety-related systems or vehicle subsystems. The use of such a device within motor vehicles to
control the main vehicle functions can be dangerous and lead to malfunction of motor vehicles.
G Patch 6222 2

CHAPTER 1. INTRODUCTION GÖPEL electronic GmbH
In no event shall GÖPEL electronic be responsible for any direct, indirect, incidental, special, exemplary, or conse-
quential damages (including but not limited to the purchase of replacement goods or services, loss of use, loss of
data or profit, breakdowns, injury, or potential death) in any way in the case of improper use of the G Patch 6222.
1.6 Supplied Accessories
As accessories to the G Patch 6222 you get:
•G Patch 6222
•Optional: connecting cable Video Dragon 6222 -G Patch 6222 (EPLSP cable (Eye Speed) from Samtec or Mini
Fakra Coax cable; Length: 1m)
•Optional: connecting cable DUT - G Patch 6222
1.7 Commissioning
Please refer to the description of the connections of your G Patch 6222 variant to perform the following steps:
1. Connect G Patch 6222 to the Video Dragon 6222 using the supplied connection cable
2. Connect G Patch 6222 to the DUT according to the housing labeling
3. If necessary, connect G Patch 6222 to the power supply and switch on voltage
G Patch 6222 3

CHAPTER 2. TECHNICAL DESCRIPTION GÖPEL electronic GmbH
2 Technical Description
2.1 Product Description
G Patch 6222 is a Breakout Box from GÖPEL electronic for simplified contacting of Video Dragon 6222 devices
with your DUTs. The test devices oen have dierent connectors than the Video Dragon 6222. The box routes the
signals from the Video Dragon 6222 to various Coax and STP variants and at the same time oers the possibility to
supply the test device with voltage.
Depending on which Media Interface is used in your Video Dragon 6222 and whether the DUT has Coax or STP con-
nectors, there is a corresponding G Patch 6222 box variant. The variant to be used depends on whether Coax or STP
is used/required and how many inputs and outputs the Media Interface oers. All current variants are explained in
this document.
2.2 Variants
2.2.1 Compatibility
Which Media Interface modules are compatible with the dierent G Patch 6222 variants can be found in the follow-
ing table:
Table 2.1: Compatibility
Video Dragon 6222 G Patch 6222
Media Interface Coax
Var. 1
Coax
Var. 2
Coax
Var.2.1
STP
Var. 1
STP
Var. 2
STP
Var. 3
STP
Var. 4
STP
Var. 5
STP
Var. 8
DS90UB940_2x STP X
DS90UB947_948 STP X
DS90UB953_4x Coax X
DS90UB954_4x Coax X
DS90UB953_954 Coax X
DS90UB953_954 STP X
DS90UB988 STP X
INAP562T_562R STP X X
MAX9295A_4x Coax X
MAX9296A_4x Coax X
MAX9295A_96A Coax X
MAX9295A_96A STP X
MAX96714_4x Coax X
The compatibility listed above is only given if you use standardized cables and pin assignments of the
connectors. Otherwise, please contact our support team.
G Patch 6222 4

CHAPTER 2. TECHNICAL DESCRIPTION GÖPEL electronic GmbH
On the following pages the available G Patch 6222 variants are listed in detail.
The designations of the connectors can be found on the bottom of your G Patch 6222 device. In this
way you can find the inputs and outputs of the signals described on the following pages.
2.2.2 Coax Variant 1
The G Patch 6222 Coax variant 1 has 3 channels and is connected to the Video Dragon 6222 via HFM (MiniFakra)
cable. Each channel has a PowerOverCoax (PoC) filter which works from 3MHz to 3GHz. The power supply of the
DUT can be established via two 4mm laboratory cables.
Table 2.2: Technical data Coax variant 1
Property Value Unit Comment
UMAX 13 V only DUT Power
IMAX per channel 250 mA only DUT Power
IMAX total 1 A only DUT Power
Dimensions 122 x 62 x 35 mm x mm x mm L x W x H
(PoC) filter Yes 3 MHz to 3 GHz
Figure 2.1: Block diagram of Coax variant 1
G Patch 6222 5

CHAPTER 2. TECHNICAL DESCRIPTION GÖPEL electronic GmbH
Table 2.3: Connector configuration Coax variant 1 - Video Dragon 6222 side
IN 1/2 OUT DUT PWR- DUT PWR+
AMS22B-40MZ5-Z AMS22A-40MZ5-Z Laboratory socket 4mm
Table 2.4: Connector configuration Coax variant 1 - DUT side
OUT IN2 IN1
AMS22A-40MZ5-Z
G Patch 6222 6

CHAPTER 2. TECHNICAL DESCRIPTION GÖPEL electronic GmbH
2.2.3 Coax Variant 2
The G Patch 6222 Coax variant 2 has 4 channels and is connected to the Video Dragon 6222 via HFM (MiniFakra)
cable. Each channel has a PowerOverCoax (PoC) filter which works from 3MHz to 3GHz. The power supply of the
DUT can be established via two 4mm laboratory cables.
Table 2.5: Technical data Coax variant 2
Property Value Unit Comment
UMAX 13 V only DUT Power
IMAX per channel 250 mA only DUT Power
IMAX total 1 A only DUT Power
Dimensions 122 x 62 x 35 mm x mm x mm L x W x H
(PoC) filter Yes 3 MHz to 3 GHz
Figure 2.2: Block diagram of Coax variant 2
G Patch 6222 7

CHAPTER 2. TECHNICAL DESCRIPTION GÖPEL electronic GmbH
Table 2.6: Connector configuration Coax variant 2 - Video Dragon 6222 side
OUT 1/2 OUT 3/4 DUT PWR- DUT PWR+
AMS22B-40MZ5-Z Laboratory socket 4mm
Table 2.7: Connector configuration Coax variant 2 - DUT side
OUT 4 OUT 3 OUT 2 OUT 1
AMS22A-40MZ5-Z
G Patch 6222 8

CHAPTER 2. TECHNICAL DESCRIPTION GÖPEL electronic GmbH
2.2.4 Coax Variante 2.1
The G Patch 6222 Coax variant 2.1 has 4 channels and is connected to the Video Dragon 6222 via HFM (MiniFakra)
cable. Each channel has a PowerOverCoax (PoC) filter which works from 3MHz to 3GHz. The power supply of the
DUT can be established via two 4mm laboratory cables.
Table 2.8: Technical data Coax variant 2.1
Property Value Unit Comment
UMAX 13 V only DUT Power
IMAX per channel 250 mA only DUT Power
IMAX total 1 A only DUT Power
Dimensions 122 x 62 x 35 mm x mm x mm L x W x H
(PoC) filter Yes 3 MHz to 3 GHz
Figure 2.3: Block diagram of Coax variant 2.1
G Patch 6222 9

CHAPTER 2. TECHNICAL DESCRIPTION GÖPEL electronic GmbH
Table 2.9: Connector configuration Coax variant 2.1 - Video Dragon 6222 side
IN 1/2 IN 3/4 DUT PWR- DUT PWR+
AMS22B-40MZ5-Z Laboratory socket 4mm
Table 2.10: Connector configuration Coax variant 2.1 - DUT side
IN 4 IN 3 IN 2 IN 1
AMS22A-40MZ5-Z
G Patch 6222 10

CHAPTER 2. TECHNICAL DESCRIPTION GÖPEL electronic GmbH
2.2.5 STP Variant 1
The G Patch 6222STP variant 1 is connected to the Video Dragon 6222 via an EPLSP cable (Eye Speed) from Samtec.
This variant has 1 input and 1 output channel with 2 lanes each. It also has an Ethernet RJ45 connector for cou-
pling and uncoupling MII/Ethernet up to 1GBit/s. The power supply of the DUT can be established via two 4mm
laboratory cables.
Table 2.11: Technical data STP variant 1
Property Value Unit Comment
UMAX 24 V only DUT Power
IMAX per channel 2 A only DUT Power
IMAX total 2.6 A only DUT Power
Dimensions 122 x 109 x 35 mm x mm x mm L x W x H
Figure 2.4: Block diagram of STP variant 1
G Patch 6222 11

CHAPTER 2. TECHNICAL DESCRIPTION GÖPEL electronic GmbH
Table 2.12: Connector configuration STP variant 1 - Video Dragon 6222 side
DUT PWR+ DUT PWR-
Laboratory socket 4mm ERI8-019-S-D-RA
Table 2.13: Connector configuration STP variant 1 - DUT side
Ethernet over APIX OUT IN
RJ45 99S20D-40MA5-Z
Pin1 = Channel 0n
Pin2 = Channel 1p
Pin3 = Channel 0p
Pin4 = Channel 1n
Pin5 = DUT PWR+
Pin6 = DUT PWR-
Pin1 = Channel 1n
Pin2 = Channel 0p
Pin3 = Channel 1p
Pin4 = Channel 0n
Pin5 = DUT PWR+
Pin6 = DUT PWR-
G Patch 6222 12

CHAPTER 2. TECHNICAL DESCRIPTION GÖPEL electronic GmbH
2.2.6 STP Variant 2
The G Patch 6222STP variant 2 is connected to the Video Dragon 6222 via an EPLSP cable (Eye Speed) from Samtec.
This variant has 2 input channels with 2 lanes each. The power supply of the DUT can be established via two 4mm
laboratory cables.
Table 2.14: Technical data STP variant 2
Property Value Unit Comment
UMAX 24 V only DUT Power
IMAX per channel 2 A only DUT Power
IMAX total 2.6 A only DUT Power
Dimensions 122 x 60 x 35 mm x mm x mm L x W x H
Figure 2.5: Block diagram of STP variant 2
G Patch 6222 13

CHAPTER 2. TECHNICAL DESCRIPTION GÖPEL electronic GmbH
Table 2.15: Connector configuration STP variant 2 - Video Dragon 6222 side
DUT PWR+ DUT PWR-
ERI8-019-S-D-RA Laboratory socket 4mm
Table 2.16: Connector configuration STP variant 2 - DUT side
IN 1 IN 2
99S20D-40MA5-Z
Pin1 = Channel 1p
Pin2 = Channel 0p
Pin3 = Channel 1n
Pin4 = Channel 0n
Pin5 = DUT PWR+
Pin6 = DUT PWR-
Pin1 = Channel 1p
Pin2 = Channel 0p
Pin3 = Channel 1n
Pin4 = Channel 0n
Pin5 = DUT PWR+
Pin6 = DUT PWR-
G Patch 6222 14

CHAPTER 2. TECHNICAL DESCRIPTION GÖPEL electronic GmbH
2.2.7 STP Variant 3
The G Patch 6222STP variant 3 is connected to the Video Dragon 6222 via an EPLSP cable (Eye Speed) from Samtec.
This variant has 2 input and 1 output channel with one lane each. The power supply of the DUT can be established
via two 4mm laboratory cables.
Table 2.17: Technical data STP variant 3
Property Value Unit Comment
UMAX 24 V only DUT Power
IMAX per channel 2 A only DUT Power
IMAX total 2.6 A only DUT Power
Dimensions 122 x 110 x 35 mm x mm x mm L x W x H
Figure 2.6: Block diagram of STP variant 3
G Patch 6222 15

CHAPTER 2. TECHNICAL DESCRIPTION GÖPEL electronic GmbH
Table 2.18: Connector configuration STP variant 3 - Video Dragon 6222 side
DUT PWR+ DUT PWR-
Laboratory socket 4mm ERI8-019-S-D-RA
Table 2.19: Connector configuration STP variant 3 - DUT side
OUT IN 2 IN 1
99S20D-40MA5-Z
Pin1 = Channel 0n
Pin2 = DUT PWR+
Pin3 = Channel 0p
Pin4 = DUT PWR-
Pin5 = DUT PWR+
Pin6 = DUT PWR-
Pin1 = DUT PWR-
Pin2 = Channel 1p
Pin3 = DUT PWR+
Pin4 = Channel 1n
Pin5 = DUT PWR+
Pin6 = DUT PWR-
Pin1 = DUT PWR-
Pin2 = Channel 0p
Pin3 = DUT PWR+
Pin4 = Channel 0n
Pin5 = DUT PWR+
Pin6 = DUT PWR-
G Patch 6222 16