Grandstream Networks GWN7605 User manual

For Certication, Warranty and RMA information, please visit
Grandstream Networks, Inc.
126 Brookline Ave, 3rd Floor
Boston, MA 02215. USA
Tel : [phone] - 9300
Fax: [phone] - 1987
www.grandstream.com
In all EU member states, operation of 5150
- 5350 MHz is restricted to indoor use only.
GWN7605
Enterprise 802.11ac Wave-2 2x2:2
Wi-Fi Access Point
Quick Installation Guide
www.grandstream.com

~ 1 ~ ~ 2 ~
EN OVERVIEW
The GWN7605 is an affordable 802.11ac Wave-2 Wi-Fi access point
ideal for small to medium wireless network deployments with medium
user density. It offers dual-band 2x2:2 MU-MIMO with beam-forming
technology and a sophisticated antenna design for maximum network
throughput and expanded Wi-Fi coverage range. To ensure easy
installation and management, the GWN7605 uses a controller-less
distributed network management design in which the controller is
embedded within the product’s web user interface. The GWN7605 is
also supported by GWN.Cloud and GWN Manager, Grandstream’s cloud
and on-premise Wi-Fi management platforms. It is the ideal Wi-Fi AP
for voice-over-Wi-Fi deployments and offers a seamless connection with
Grandstream’s Wi-Fi-capable IP phones. With support for advanced
QoS, low-latency real-time applications, mesh networks, captive portals,
100+ concurrent clients per AP and dual Gigabit network ports with PoE/
PoE+, the GWN7605 is scalable Wi-Fi solution for deployments such as
retail locations, restaurants, small ofces and more.
PACKAGE CONTENTS
GWN7605 PORTS
POWERING AND CONNECTING THE GWN7605
PRECAUTIONS
• Do not attempt to open, disassemble, or modify the device.
• Do not expose this device to temperatures outside range of 0 °C to 40
°C for operating and -10 °C to 60 °C for storage.
• Do not expose the GWN7605 to environments outside of the following
humidity range: 10-90% RH (non-condensing).
• Do not power cycle your GWN7605 during system boot up or rmware
upgrade. You may corrupt rmware images and cause the unit to
malfunction.
GWN7605 can be powered on using PoE/PoE+ switch using following
steps:
Step 1: Plug a RJ45 Ethernet cable into the network port of GWN7605.
1×GWN7605
Access Point
1×Mounting
Bracket
1×Ceiling
Mounting Bracket
3×Screw
(PM 3×50)
3× Screw
(PA 3.5×20)
3×Plastic Expansion
Bolt
Port Description
NET/POE Ethernet RJ45 port (10/100/1000Mbps) supporting
PoE/PoE+.
NET Ethernet RJ45 port (10/100/1000Mbps) to your router
or another GWN76xx.
RESET Factory reset button.
Press for 7 seconds to reset factory default settings.
Network Port
RJ45 Ethernet Cable
to power over Ethernet
(PoE/PoE+) Switch
Step 2: Plug the other end into the uplink port of the power over Ethernet
(PoE/PoE+) switch.
1×Quick Installation Guide
1×GPL Statement
3×M3 NUT
HARDWARE INSTALLATION
GWN7605 can be mounted on the wall or ceiling, Please refer to the
following steps for the appropriate installation.

~ 3 ~ ~ 4 ~
Wall Mount
1. Position the mounting bracket at the desired location on the wall with
the arrow pointing up.
2. Use a pencil to mark the four mounting holes (screw holes DIA
5.5mm, reticle hole DIA 25mm).
3. Insert screw anchors into the 5.5 mm holes. Attach the mounting
bracket to the wall by inserting the screws into the anchors.
Plastic expansion
bolt
PA3.5X20
Screw
Wall
4. Connect the power cable and the ethernet cable (RJ45) to the
correct ports of your GWN7605.
5. Align the arrow on the GWN7605AP with the arrow on the locking
tab of the mounting bracket and ensure that your GWN is rmly seated
on the mounting bracket.
6.Turn the GWN clockwise until it locks into place and ts the locking
tab.
456
Ceiling Mount
Note: Ceiling mounting is recommended for optimal coverage
performance.
1. Remove the ceiling tile.
2. Place the ceiling backing plate in the center of the ceiling tile and
mark the mounting screw holes (screw holes DIA 5.5mm, reticle hole
DIA 25mm).
3. Insert the screws through the mounting bracket.
4. Connect the Ethernet cable (RJ45) to the correct ports of your
GWN7605.
5. Align the arrow on the GWN7605AP with the arrow on the locking
tab of the mounting bracket and ensure that your GWN is rmly
seated on the mounting bracket and connect the network and power
cables.
6. Turn the GWN clockwise untill it locks into place and ts the locking
tab.
1
2
3
M3 Nut
Ceiling Mounting
Bracket
M3.0X50
Screw
4
5
6
1
23

~ 5 ~ ~ 6 ~
CONNECT TO GWN7605 DEFAULT Wi-Fi NETWORK
A computer connected to the GWN7605’s SSID, or to the same network as
the GWN7605 can discover and access its conguration interface using one
of the below methods:
Method 1: Discover GWN7605 using its MAC Address
1. Locate the MAC address on the MAC tag of the unit, which is on the
underside of the device, or on the package.
2. From a computer connected to same network as the GWN7605, type
in following address using GWN7605’s MAC address on your browser
https://gwn_<mac>.local
Example: If a GWN7605 has the MAC address 00:0B:82:8C:4D:F8, this unit
can be accessed by typing https://gwn_000b828c4df8.local on the browser.
Method 2: Discover GWN7605 using GWN Discovery Tool
1. Download and install GWN Discovery Tool from the following link:
http://www.grandstream.com/tools/GWNDiscoveryTool.zip
2. Open the GWN DiscoveryTool, and click on Scan.
3. The tool will discover all GWN76XX Access Points connected on the
network showing their MAC and IP addresses.
ACCESSING THE CONFIGURATION INTERFACE
SSID:GWNXXXXXX
S/N XXXXXXXXXXXXXXXX
MAC XXXXXXXXXXXX
WiFi Password: XXXXXXXX
( ) P/NNN XXX-XXXXX-XXXXX
CAN ICES-3(B)/NMB-3(B)
IC: 11964A-GWN7605
FCC ID: YZZGWN7605
Model: GWN7605
Input: 48V 0.5A POE
Enter username and password to login. (The default administrator
username is “admin” and the default random password can be found at
the sticker on the GWN7605).
● Make sure that the GWN7605 is not already paired with another
GWN76xx Access Point as slave, GWN7000 Router Series or anu
of the GWN Management Platforms, otherwise the conguration
interface cannot be accessed
● If the GWN7605 is already paired, make sure to unpair it rst, or do
a factory reset.
● It is customer’s responsibility to ensure compliance with local
regulations for frequency bands, transmit power and others.
● To manage GWN7605 over cloud,please refer to https://www.gwn.
cloud.
Refer to online documents and FAQ for more detailed information:
http://www.grandstream.com/our-products
Notes:
GWN7605 can be used as standalone access point out of box, or after
factory reset with Wi-Fi enabled by default.
After powering the GWN7605 and connecting it to the network,
GWN7605 will broadcast a default SSID based on its MAC address
GWN[MAC’s last 6 digits] and a random password.
Note: GWN7605’s default SSID and password information are printed
on the MAC tag of the unit.
The GNU GPL license terms are incorporated into the device rmware
and can be accessed via the Web user interface of the device at my_
device_ip/gpl_license. It can also be accessed here:
http://www.grandstream.com/legal/open-source-software
To obtain a CD with GPL source code information please submit a
written request to [email protected]
4. Click on Manage Device to be redirected directly to the GWN7605’s
conguration interface, or type in manually the displayed IP address on your
browser.

For certification information, please refer to User Manuals:
http://www.grandstream.com
Common part：
This equipment complies with radiation exposure limits set forth for an uncontrolled
environment. This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter. This equipment should be installed and operated with minimum
distance 20cm between the radiator& your body.
U.S. FCC Part 15 Regulatory Information
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
Canada Regulatory Information
Operation of 5150-5250 MHz is restricted to indoor use only.
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation,
Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject
to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired
operation of the device.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux
CNR d’Innovation, Sciences et Développement économique Canada applicables aux
appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions
suivantes :
1) L’appareil ne doit pas produire de brouillage;
2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d’en compromettre le fonctionnement.
CAN ICES-3 (B)/NMB-3(B)