Subject: Installation of GPS antenna
Models G 115E, all S/N
Affected:
Time of optional
Compliance:
Background The installation of the GPS antenna P/N AU 22522 is approved.
Information:
Action:
Replace the GPS antenna as follows:
-remove the GPS (item 60) antenna P/N ANP-C-114 and co—axial cable
IAW Maintenance Manual Chap. 34-50
-install the antenna P/N AU 22522 (item 60) using the screws P/N
DIN965M3x12 (item 10), washer P/N DIN9021-3,2 (20) and nuts LN9348-M3
(30)
-connect new co-axial cable P/N RB 09 ERG142-X to antenna and DGPS
-do a test for the correct operation of the DGPS
NOTE: It might be necessary to enlarge the hole for the plug !