Haier LE32B9500WB User manual

LE32B9500WB

1
Contents
1Safety and warnings..........................................................................................................2
2Introduction.....................................................................................................................
3
................. 4
4
Installation...................................................................................................................... 5
5
Remote Controller...........................................................................................................1
6
TV Operation..................................................................................................................11
Trouble shooting............................................................................................................. 16
...................10

2

3
If you are going to clean the product,Unplug the TV,use
soft fabric,no water,never chemicals.

4
TV 48.25 MHz – 863.25 MHz
99
Frequency
Quick Set up Guide
Note:This product uses a panel consisting of sub pixels which require sophisticated technology to
produce. However, there may be a few bright or dark pixels on the screen. These pixels will have
no impact on the performance of the product.
55W
2 x 10W
Aspect Ratio
PAL/BG PAL/I PAL/DK
80cm 768x1366
1xCOAXIAL
1xHEADPHONE
PC AUDIO x 1
VGA x 1
3
AV
1

5
Finished.
Stand Assemble Instruction
INSTALLATION
Attach the stand base set to the bottom
of the TV by firmly tightening the
supplied 4pcs 4x18mm screws.
INSTALLATION NOTES
Locate the TV in a room where light does not strike the screen directly. Total darkness or a reflection
on the screen can cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing.
Allow enough space between the TV and the wall to permit ventilation.
Please do not attempt to rotate the TV on the stand.
Avoid excessively warm locations to prevent possible damage to the cabinet or premature component
failure.
Wall Mounting Installation Guidelines
Use the four screws to fix the TV onto a wall mounting bracket (not included) via the four VESA standard
holes on the back of the television.
Specification:
WARNING
Never place a television set in an unstable location. A television set may fall, causing serious personal injury
or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as:
– Using cabinets or stands recommended by the manufacturer of the television set.
– Only using furniture that can safely support the television set.
– Ensuring the television set is not overhanging the edge of the supporting furniture.
– Not placing the television set on tall furniture (for example, cupboards or bookcases)
without anchoring both the furniture and the television set to a suitable support.
– Not placing the television set on cloth or other materials that may be located between the
television set and supporting furniture.
– Educating children about the dangers of climbing on furniture to reach the television set or its controls.
If your existing television set is being retained and relocated, thesameconsi
derations as
)dedulcniton(swercs4gnisumm001xmm001 . The mounting holes are 10mm deep.
aboveshouldbeapplied.
M6
M6
M6
M6

6
*#
YPbPr share one audio channel.
PC AUDIO,VGA,Y/Pb/Pr,RF,HDMI1.
.B,VIDEO/L/R,COAXIAL,HEADPHONE.SU,3IMDH,2IMDH
Note: VIDEO and
HDMI3 USB HDMI2
COAXIAL
POWER
REWOP+HC-HC+LOV-LOVUNEMSOURCE

RF.
7
STEPS:
Be sure both the TV and computer are Power off.
1.Connect VGA and audio cable
2.Connect power cord
3.Power on the TV, switch to PC mode
4.Power on the PC
This sequence is very important.
PC

640*480
720*400 70 31.50
47.70
31.5060
5
480i/480P 601
502
3
4
576i/576P
720P 50/60
1080i/1080P 50/60
9
Signal format

9
2
HDMI3 USB HDMI2
COAXIAL

Miracast
* #
No function
10

NOTE:
1).Tint is available in NTSC system only.
2).Manually adjusting picture settings will automatically
change the Picture Mode to User.
TV OPERATION
1. CHANNELMENU
The third item of the MENU is CHANNELMENU
You can search channels and edit programs here.
1. PICTURE MENU
The first item of the MENU is PICTURE MENU.
You can adjust picture effect here, such as contrast,
brightness, etc.
Press to move, press to adjust.
Press to move, press to adjust.
2. SOUND MENU
The second item of the MENU is the SOUND
MENU.
You can adjust the sound effect here such as
treble, bass, balance etc.
Note:
Auto volume: only available when the input
signal volume is too large or distortion.
Press to move, press OK or button to enter .
11

Press to move, press OK / button to enter ，
2).Auto :Tuning
Search all the TV channels automatically.
3). ATV Mannul Tuning:
You can change the sound system to search the analog
TVchannelsand finetune the channels,then storage
the channelsyou selected.
NOTE:
1). Channel Edit:
You can Delete, Swap or Skip any programs.
TV OPERATION
4. Applications MENU
The forth item o
or press to adjust.
f the MENU is the Applications MENU.
You can adjust the Menu Language, Teletext Language,
PC Settings, System Lock, Auto Power Down, CEC.
NOTE:
Press number key “0000” to enter into System Lock.
Hot Key Description：
Press RED button to delete the channel selected.
Press GREENbutton to move down the channel.
Press BLUE button to skip the channel selected.
Press FAV buttonto set the favorites channels.
Press CH +/-button to turn the page.
When the System Lock is on, please input the PIN code to
unlock.
12

5. Setup MENU
f the menu is the Setup MENU.
You can adjust OSD Timer, Blue Screen, Sleep Time
Location, Show Room, Reset TV etc.
Press to move, press OK / button to enter ，
or press to adjust.
NOTE:
Reset will clear all the programs and password.
6. USB FUNCTION
You must enter the Source menu first,then choice the
USB and press OK button,the USB menu will appear.
Please make sure that the USB device have plugged in
the slot. There are four item can be selected, such as photo
, music, movie and Miracast . Select the item by pressing
, press OK button to enter the disk selection menu.
In the movie mode, when you use FB, FF function, The
audio may be pause in several seconds to synchronize
the audio signal and video signal.
NOTE:
When the USB device isn't supported, it may be that the
power of the USB device isn't enough.
TV OPERATION
Press the OK to display media files and folder list or
choose Return to back to the media type selection menu.
Select the media file by pressing or , then
the preview frame will pop up. Press the button
to play the media file in full screen. When the
media file (photo, music, movie) is playing, press the
OK
OK
or button can display the control bar. INFO
The fifth item o
13

TV OPERATION
Press to select the function icon, press OK button
to confirm the function.
NOTE:
You can adjust the audio track, subtitle, or program in
the Info menu while playing the video file.
Choose the Info icon and press OK can display the Info
MENU.
NOTE:
Music function need to put music and picture in the
same folder.
7. Operation instructions of Miracast
1.select the Miracast source or USB source and enter.
2.Then you will see the Miracast icon.
3.Enter the Miracast, wait for serival seconds you will
see the Miracast Ready.
4.After the Miracast ready, you can use your phone
to connect.
cast on the TV.
5.After connect success, The phone screen will be
14

8.
TV OPERATION
Hotel Mode:
How to enter and exit the hotelmode menu:：
Enter：You ca
NOTE: Only Android cellphone with projection screens
function can support this function.
n enter the hotel mode menu by the follow steps：
Press "H.Lock" button, then press password "0000".
Select：use direction key to select the different items.
Confirm：Press the key “OK” or right direction key to confirm.
15

16