Happiest Baby Lola Crib User manual

Lola Crib
™
Assembly Instructions

Item Number - CRB1
Happiest Baby Lola Crib
Assembly Instructions
V13
WARNING: Failure to follow these warnings
and assembly instructions could result in serious injury or death.
Read all instructions before assembling crib.
KEEP INSTRUCTIONS FOR FUTURE USE.
WARNING: Parents should ensure a safe environment
for the child by checking regularly, before placing the child in the product,
that every component is properly and securely in place.
•Do not use this crib if you cannot exactly follow the instruction that comes with it.
•Do not place this crib near a window or a patio door where a child could reach the
cord of a blind or curtain and be strangled.
•Check this crib regularly before using it, and do not use it if any parts are loose
or missing or if there are any signs of damage. Do not substitute parts. Contact
Happiest Baby Inc if replacement parts or additional instructions are needed.
•Children can sufocate on soft bedding. Do not place pillows, comforters, or soft
mattresses in this crib.
•Do not use this crib for a child who can climb out of it or who is taller than 89 cm.
•Do not place any cord, strap, or similar item in or near this crib that could become
wrapped around a child’s neck.
•Check this product for damaged hardware, loose joints, loose bolts or other fasteners,
missing parts, or sharp edges before and after assembly and frequently during use.
Securely tighten loose bolts and other fasteners. DO NOT use crib if any parts are
missing, damaged, or broken.
•Contact Happiest Baby Inc for replacement parts and instructional literature if
needed. DO NOT substitute parts.
•STRANGULATION HAZARD: Strings can cause strangulation! Do not place items
with a string around a child’s neck, such as hood strings or pacifier cords. Do not
suspend strings over a crib or attach strings to toys.
•To help prevent strangulation tighten all fasteners. A child can trap parts of the body
or clothing on loose fasteners.
•DO NOT place crib near window where cords from blinds or drapes may strangle
a child.

•FALL HAZARD: When child is able to pull to a standing position, set mattress to
lowest position and remove bumper pads, large toys and other objects that could
serve as steps for climbing out.
•STOP using crib when child begins to climb out or reaches the height of 35 in. (89cm).
•Infants can sufocate in gaps between the crib sides and a mattress that is too small.
•Infants can sufocate on soft bedding. Never add a pillow or comforter. Never place
additional padding under an infant.
•To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their
backs to sleep, unless otherwise advised by your physician.
•DO NOT use a water mattress with this crib.
•Replace teething rail if damaged, cracked, or loose, for crib that is equipped with
teething rail.
•If refinishing, use a non-toxic finish specified for children’s products.
•Follow warnings on all products in a crib
•Use a crib mattress that is no thicker than 15 cm and is of such a size that, when it is
pushed firmly against any side of the crib, it does not leave a gap of more than
3 cm between the mattress and any part of the sides of the crib.
•Never use plastic shipping bags or other plastic film as mattress covers because they
can cause sufocation.
WARNING: Please DO NOT remove any wood screws
in the normal disassembly of the crib.
Please read the Warning and Caution
Statements insert before using your crib.
CAUTION: ANY MATTRESS USED IN THIS CRIB
MUST BE AT LEAST 27 ¼ INCHES (69 CENTIMETERS) BY 51 ⅝INCHES
(131 CENTIMETERS) WITH THICKNESS NOT EXCEEDING 6 INCHES
(15 CENTIMETERS).
THIS PRODUCT CONFORMS TO THE APPLICABLE REGULATIONS OF THE
CONSUMER PRODUCTS SAFETY COMMISSION.

ENGLISH
Care and Cleaning
Care and Cleaning Instructions
•Dust regularly with soft, clean, lint-free, and dry clothes
•Clean by wiping with soft, cloth damp with mild soap
•Do not use chemical cleaners
•Do not use abrasives or furniture polish for cleaning
•Do not chip or scratch the finish
•Use clean and damp cloths to blot up spills immediately
Storage
Storage
•It is best to place the crib away from direct sunlight for an extended period of time,
as prolonged harsh sunlight can discolor the finish.
•It is best to place the crib away from air-conditioning and heating vents.
Keep This Manual In A Safe Place For Future Reference
Hardware may loosen over time. Please check all bolts and screws to make sure all
connections are tightly fastened. Re-tighten if necessary. Please read all cautionary
statements on the inserted sheet before using this crib.
• Do not dispose of any packaging or shipping carton contents until assembly is
completed to avoid accidentally discarding small parts or hardware.
Contact Happiest Baby Inc
3115 S La Cienega Blvd
Los Angeles, CA 90016
Ph: [phone]
www.HappiestBaby.com
Two person operation

R
L
Mattress Spring Corner Posts Headboard (Rear Side)
Right Minor Side
Legs
Left Minor Side
Minor Side Frame
Footboard (Front Side)
Footboard Side Frame
Headboard Side Frame
All hardware is packaged in bags labeled with the assembly step they correspond with.
L-Key
Barrel Nuts
4x
Locking Washer
36x
Wood Dowel
14x
3 inch
Bolt
8x
2.25 inch
Bolt
4x
1.75 inch
Bolt
12x
1.5 inch
Bolt
8x
1.25 inch
Bolt
4x
.63 inch
Bolt
4x

1 Find the 4 sides of the crib frame on the top layer of packaging.
Take the 8 wooden dowels from hardware kit bag labeled ”For Step 1”
and use them to mate crib frame.
Headboard SIde
8x
Wood Dowel
Footboard SIde
When put together it should look like this:

2
Use the 4 barrel nuts, washers and
bolts in the “For Step 2” bag to
fasten the frame together as shown.
4x
4x
4x
Locking Washer
Barrel Nuts
2.25 inch
Bolt
3
Use the 8 bolts and washers from the bag labeled ”For Step 3”
to fasten the legs as shown.
Footboard SIde
Headboard SIde
8x
8x
Locking Washer
1.5 inch Bolt

Use the 2 dowels from the bag labeled ”For Step 4” to index the Footboard on the
frame. Then use the 4 bolts and washers to fasten the Footboard to the Frame
as shown.
2x
Wood Dowel
4x
Locking Washer
4x
3 inch Bolt
4

Use the 4 bolts and washers from the bag labeled ”For Step 5” to fasten the
2 Corner Posts to the Footboard as shown.
Locking Washer
4x
1.25 inch
Bolt
4x
5

6 Use the 2 dowels from the bag labeled “For step 6” to index the
Minor Sides and use the 4 bolts and washers to fasten them to the
frame as shown.
2x
Wood Dowel
4x
Locking Washer
4x
3 inch Bolt

8
Place the Mattress Spring inside the crib on top of the frame. Flip up the attachment
brackets located at each corner of the Mattress Spring. Then use the 4 bolts from the
bag labeled “For Step 8” to attach Mattress Spring to the Minor Sides of the crib.
Note: The mattress support should be at the highest level when the child is a
newborn. The mattress support must be at the lowest level before the child can
stand up.
4x
.63 inch
Bolt
7
Use the 4 washers and bolts from the bag labeled “For step 7” to fasten
the Minor Sides to the Corner Posts as shown.
4x
1.75 inch
Bolt
4x
Locking
Washer

9
Use the 2 dowels from the bag labeled ”For Step 9” to index the Headboard on the
frame. Then use the 8 bolts and washers to fasten the Headboard to the Frame and
Minor Sides as shown.
8x
Locking Washer
1.75 inch
Bolt
8x
2x
Wood Dowel

10
Congratulations! Your Lola Crib is now assembled.
Grow up with Lola Crib!