Hayter Spirit 41 617J User guide

RELEASED Ver-A.0 ©Toro 2015
Material No:
111-7891
Rev:
A
Release/Change Authorization Number:
5095416
CONFIDENTIAL
Description:
MANUAL OP SPIRIT 41 AD RR [617_619:EN]
Issue Date : 10/14/2014
HAYTER
Technical
Publications
Assembly
Supersedes:
Created By :
LH
Scale :
None
THIS UNPUBLISHED DOCUMENT CONTAINS HAYTER CONFIDENTIAL AND PROPRIETARY INFORMATION. IT
MAY NOT BE WHOLLY OR PARTIALLY COPIED, DISCLOSED TO OTHERS, OR USED FOR ANY PURPOSE
WITHOUT WRITTEN PERMISSION FROM HAYTER. IF PUBLICATION OCCURS, THE FOLLOWING NOTICE
APPLIES: “HAYTER ALL RIGHTS RESERVED”.
Reason for Revision:
RELEASE TO PRODUCTION
C:\Windows\Temp\pdfg-LYNMS313_\82\d8a4-97581c-e09490-3b9995-87db2e-e419e3\111-7891.doc Page 1 of 1
Comments
COVER PAGE FOR MANUAL OP SPIRIT 41 AD RR [617_619:EN]

RELEASED Ver-A.0 ©Toro 2015
Spirit 41 Push and Autodrive
Codes 617J & 619J
Original Version (EN)
Issued: 14/10/2014 From Serial Number: 315000001 Onwards Part number: 111-7891 Rev A
OWNER’S HANDBOOK

RELEASED Ver-A.0 ©Toro 2015
CONTENTS
2
Introduction 3
Safety Compliance 3
Main Features 4
Specifications 4
Safety Symbols 5
Safety Precautions 6 - 7
Safety Alert Symbol 6
Training 6
Preparation 6
Operation 6 - 7
Maintenance & Storage 7
Assembling the Mower Before First Use 8
Delivery Checklist 8
Handlebar 8
Grassbag Assembly 8
Grassbag Attachment 8
Prevent Engine Damage 8
Oil Type 8
Check Oil Level 8
Operating the Mower 9 - 11
Fuel Type 9
Controls 9
Starting 9
Forward Travel 9
Reverse Travel 9
Turning 10
Stopping 10
Slopes 10
Height of Cut 10
Before Mowing 10
Grassbag 10
Collection Without Grassbag 10
Heavy Growth 11
Friction Disc 11
Non Grassed Areas 11
Maintenance Schedule 12
Mower Maintenance 13 - 15
Engine Detail 13
Carburettor Adjustments 13
Oil Service 13
Air Cleaner Service 13
Spark Plug Service 13
Keeping Engine Clean 14
Grassbag 14
Deck Housing 14
Securing Nuts & Bolts 14
Clutch Cable Adjustment 14
Lubrication 14
Cutterblade Removal 14 - 15
Cutterblade Assembly 15
Cutterblade Sharpening 15
Storage 15
Lawn Care Calendar 16
Trouble Shooting 17
Warranty 18
EU Privacy Statement 19
Notes 19
Service Records & Customer Information 20

RELEASED Ver-A.0 ©Toro 2015
INTRODUCTION SAFETY COMPLIANCE
3
Thank you for purchasing a Hayter mower. The following pages are designed to help you gain
safe and efficient service from your machine.
IMPORTANT: This ‘Owners Handbook’ should be regarded as part of the mower as it gives
essential information regarding mower safety, operation, maintenance and specifications.
Read and understand this handbook prior to operating your mower for the first time. Make
sure you are familiar with all the controls and points of regular maintenance. If you have
any doubts, consult your local Hayter authorised dealer who will be pleased to give you
assistance.
IMPORTANT: This mower is designed solely for use in a domestic grass cutting
environment. Use in any other way is considered as contrary to the intended use. Compliance
with and strict adherence to the conditions of operation, service and repair as specified in this
handbook also constitute essential elements of the intended use.
This mower should be operated, serviced and repaired only by persons who are familiar with
its particular characteristics and who are acquainted with the relevant safety procedures.
The safety precautions listed in this handbook and all other generally recognised regulations
on safety must be observed at all times.
Use of non standard parts or any arbitrary modifications carried out on this machine may
relieve Hayter Limited of liability for any resulting damage or injury.
Hayter mowers are robustly constructed and designed for efficient economical performance
under normal mowing conditions. Correct operation and maintenance will ensure a long and
satisfactory service life. Prior to despatch from our factory every effort is made to ensure that
your mower is delivered in perfect condition.
Throughout this handbook all references to left and right are as viewed from behind the
handlebar, in the direction of forward travel.
This handbook is based on information available at the time of publication.
HAYTER LIMITED reserve the right to amend product specifications without prior
notification.
Please be advised that the illustrations in this Handbook are generic and not specific to your
product.
To ensure low noise and vibration levels, carry out the following procedures correctly:
• To prevent overloading the engine, use the correct height of cut and ground speed (where
applicable).
• Follow the recommended maintenance instructions.
• Do not use your mower for prolonged periods of time.
• Always wear hearing protection.
VIBRATION INFORMATION
Hand / Arm Vibration Level at the Operator Position measured in accordance with European
Standard EN ISO 5395:2013.
617 619
Measured Vibration Level ahw 6 ms-2 6 ms-2
Uncertainty of measurement K 3 ms-2 3 ms-2
SOUND PRESSURE INFORMATION
Sound Pressure Level at the Operator Position measured in accordance with European
Standard EN ISO 5395:2013.
617 619
Measured Sound Pressure Level LpA 84 dB (A) 84 dB (A)
Uncertainty of measurement K 2 dB (A) 2 dB (A)
SOUND POWER INFORMATION
Sound Power Level measured in accordance with European Standard EN ISO 5395:2013.
617 619
Measured Sound Power Level LwA 93 dB (A) 93 dB (A)
Uncertainty of measurement K 3 dB (A) 3 dB (A)
For a full range of products and to locate your nearest authorised sales stockist, service or parts dealer please visit our website at www.hayter.co.uk

RELEASED Ver-A.0 ©Toro 2015
4
MAIN FEATURES SPECIFICATIONS
1
6
5
7
8
9
10
11
12
13
14
15
16
34
2
1. Exhaust Guard 9. Handlebar
2. Engine Cover 10. Grassbag
3. Finger Guard 11. Rear Deflector
4. Oil Filler and Dipstick 12. Height of Cut Adjuster
5. Serial No. Label 13. Fuel Tank and Cap
6. Handlebar Securing Knob 14. Stop Switch
7. Engine Start Grip 15. Primer
8. Engine Stop Lever 16. Air Cleaner
Code 617 619
Weight 29 kg 31 kg
Length 1370 mm 1370 mm
Width 472 mm 472 mm
Height 1050 mm 1050 mm
Width of Cut 410 mm 410 mm
Height of Cut (7 positions) 13 - 65 mm 13 - 65 mm
Cutterblade Speed 2850 rpm 2850 rpm
Engine Briggs & Stratton Briggs & Stratton
Engine Type Series 450E Series 450E
Engine Power Rating (Net) 1.75 kw 1.75 kw
Fuel Type Unleaded Petrol Unleaded Petrol
Fuel Capacity 0,75 litre 0,75 litre
Oil Type SAE 30 SAE 30
Oil Capacity 0,44 litre 0,44 litre