HCMOUNTING HCMS5745 User manual

INSTALLATION INSTRUCTION
HCMS5745
Soundbar Bracket
Rev.2
Universal
fit
Thank you for choosing HCMOUNTING! This product comes with 10 years warranty.
For any questions during installation and use, please contact us first. We are 7*24
hours available to ensure that your problems will be 100% well-solved.
Email: [e-mail]

1
1. Please check the following
1. Please read the instruction carefully before installation
2. WARNING
3. WARM TIP
For wall-mounted TVs, the wall must be capable of supporting five times the
weight of the TV, mount, soundbar, and all accessories combined.
This product contains small hardware that could be a choking hazard if
swallowed.
Not all hardwares included will be used.
Improper installation may result in product damage or bodily injury.
HCMOUNTING is not liable for any damage or injury caused by improper
installation, incorrect assembly, or misuse.
Do not use this product to any other purpose not indicated by HCMOUNTING.
Safety tips
Before Installation:
The weight of your soundbar DO NOT EXCEED 20LBS (9kgs).
Please check that all parts are in good condition before installation. If you
find any damaged parts, please contact our customer service immediately
instead of returning them to Amazon.
Read the user's manual of your TV, soundbar, and TV mount for more
installation instructions.
Please make sure that the total weight of your TV, soundbar, soundbar
mount, and all accessories is below the maximum weight capacity of your
TV mount.
2. Please prepare the tools required for the installation
Flexible rule

2
STEP 1. Attach brackets and soundbar
1-1 Main components and hardwares
1-2 Select Soundbar installation mode
Main components
Installation hardwares
Bracket x 2 "L" Bracket x 2
M6X15mmM5X15mmM4X15mm
M4/M5/M6 Washer M6 Blocking nut
M6X30mm
x 4x 2x 2
x 4x 8
x 4
Matting x 2
01 02
05 06
03 04
04
A B C
1. For installation with wide hole
spacing.
3. For the soundbar bottom holes, you need to assemble the extension arms.
2. For installation with narrow hole
spacing.
A
B
06
05

3
1-3 Install Soundbar
1-4 Select the appropriate installation mode according to the
holes on the Soundbar
Select the right Screws/Washers/Spacers to install
1. The screw holes on the back of the soundbar
2. The wall-mounted holes on the back of the soundbar
3. The screw hole is at the bottom of the soundbar
Tips: The dimension of L in the figure is equivalent to the pitch of two holes on the soundbar. Adjust the
screw head to the gasket width, as shown in W, and it can just buckle the screw head on the bracket into
the soundbar hole. No obvious shaking after the buckle, indicating successful installation.
M4 M5 M6
05
06
04
A
C
01 02
05
05
03 04
01 02 03 04
A
B
A
L
W

4
STEP 2. Mount the soundbar bracket ono the TV
Hardware Listing
M6X15mmM4X30mmM4X15mm
M4/M6 Washer 10mmSpacer Ring 5mmSpacer Ring
( 18x8.5x5.0)X4
( 18x8.5x10.0)X4
M6X30mm M8X25mm
x 4x 4x 4
x 8
x 4
ab
gh i
x 4
f
cdx 4 e
M8X45mm
Tip 1: Select the right screws/washers/spacers according to the size and depth of
the TV screw holes.
Tip 2: Choose the appropriate installation mode based on your requirements.
Warm Tips: Only one screw is needed to complete the installation of the
soundbar and TV.
M4 M8M6
On top of the TV
At the bottom of the TV

5
For soundbar bracket directly attach to TV back
For soundbar bracket directly attach to TV back, follow STEP 2A
For soundbar bracket attach to TV mount, follow STEP 2B
STEP 2A
1. There is no countersunk screw hole on the back of the TV.
2. There are countersunk screw holes on the back of the TV
ab
g
cd
g
hi
f
e
Installation effect

6
For soundbar bracket attach to TV mount
STEP 2B
Ⅰ
Pack up all cables
Ⅱ
Take off the TV from
the mount
Ⅲ
Remove the TV
brackets from the TV
2B-1 Removing the TV from the TV mount
2B-2 Assemble the soundbar bracket and TV bracket together,
as below:
ab
g
g
h i h i
f
cdeabf cde