HOME8 IPC2201 User manual

Add-On Device Quick Start Guide
.
Twist HD camera
Quickstart Guide
Model No. IPC2201
1x Power Adapter 1x Power Cable
1x Twist HD Camera
What’s inside:
Step 1: Assemble your device and accessories
1-10 ft
1. Unpack your device and accessories.
2. Pair the Camera with the Security Shuttle within
1-10 feet to make sure the connection is working well.
3. Connect the included power adapter to theTwist HD
Camera and plug it in.
Step 2: Add a device
1 . Open the Home8 app, tap on the menu button
" " and select “Device Management”.
2. Press the add button ‘+’ next to “Camera”.
3. Follow the app instructions to scan the QR code
located on the button of the device.
Note: If the scan is incomplete, you will be asked to enter the serial number
(SN) of the device.
4. When the activation is completed, the device will be
added to the device management page.
Option 1: Add it with your existing home8 system
Before you mount your device, see if it's within
Security Shuttle’s range.
1. Take it to the room you want to use it in and plug it in.
2. Access your Home8 app, tap on the Video, wait until
you see live streaming video from the app, it is
connected to the system.
Now you can place your camera and enjoy.
Step 3: Place your device
Add-On Device Quick Start Guide
Add-On Device Quick Start Guide Add-On Device Quick Start Guide
1 2
3 4
99200297MIG
To save video clips locally or turn on the continuous recording
function, a MicroSD card (FAT32, SDHC type) is needed.
Note:
1. Please insert the MicroSD card into the camera when it is powered off
to avoid damage to the MicroSD card.
2. Video recording service require service subscription, please visit our
website for more information
Operates on 2.4GHz Wi-Fi signal
Note: 2.4GHz has better Wi-Fi transmission distance and is less prone to
interruption from the obstruction of solid objects.
Virtual gateway does not support 5GHz Wi-Fi features.

1. After the camera is powered on, short press the
button on top of the camera to switch to “Local
Mode”. In “Local mode”, the left and right LED indica
-tors will respectively show a solid blue and purple
light.
Blue Light Purple Light
Local Mode
Note: Make sure your Wi-Fi router is on.
Make sure the Wi-Fi of your smartphone is on
1. Tap the side bar “ ” to show the sidebar menu;
then, tap “Device Management”.
2. Swipe left across the screen and select “IP Camera”.
3. Follow the on-screen instructions. When finished,
press “Next”.
1. After scanning the QR code located on the bottom
of the camera, tap “Close”; then, tap “Settings” to
access the Wi-Fi settings page to let your smart
device connect to the IP camera network. Select the
SSID marked as “miife”, followed by the last 6 digit
of the camera’s serial number located on the
buttom ( S/N__xxxxxx); then follow the subsequent
on-screen instructions.
2. After connecting to the camera network, launch the
app again. Select your Wi-Fi network and enter the
password if necessary. When finished, tap “Join”.
3. Follow the on-screen instructions.
4. After the activation is completed, you will see the
message “System is ready” on the screen. By click
ing “OK”, a virtual Security Shuttle and the camera
will be added to the device management page.
Step 2: Assemble your device and accessories
Step 2: Add it to the System with Vitural OPU
Step 3: Sync Virtual OPU with Wi-Fi Network
Option 2: Use as Standalone
Add-On Device Quick Start Guide Add-On Device Quick Start Guide
Add-On Device Quick Start Guide Add-On Device Quick Start Guide
Troubleshooting Tips
If you’re having trouble adding your device,
you may need to reset it.
• Remove the top cover and locate the pinhole.
• Insert a pin and hold for 3-5 seconds until
you hear a beep.
• Return to Step 2 and add the device again.
Step 1: Set up your smartphone
1 . Connect your Smartphone to Wi-Fi.
2. Download the Home8 app from the App Store,
Google Play, or Windows store.
3. Follow the steps to create an account.
5 6
7 8
Mode Change Button
Reset Button