HOOKII Neomow S User manual

EN User manual
Neomow S
1.2 Information on the Landroid®
WARNING - Robotic lawnmower can be dangerous if incorrectly used.
Read through the Operator’s manual carefully and understand the content before using
lawnmower.
WARNING - Keep a safe distance from the machine when operating.
WARNING – Operate the disabling device before working on or lifting the machine.
WARNING - Do not ride on the machine.
Do not burn
Do not expose to rain or water.
1.2 Information on the Landroid®
WARNING - Robotic lawnmower can be dangerous if incorrectly used.
Read through the Operator’s manual carefully and understand the content before using
lawnmower.
WARNING - Keep a safe distance from the machine when operating.
WARNING – Operate the disabling device before working on or lifting the machine.
WARNING - Do not ride on the machine.
Do not burn
Do not expose to rain or water.

our robotic
our robotic
Neomow S
User manual
Read the User Manual carefully before use.
Make sure you understand all the instructions and safety warnings.
Keep for future reference.
EN English
Original instructions

1
Content
Welcome .............................................................................................................
2
Safety Warnings
...................................................................................................
2
Installation ........................................................................................................
8
Operation ...........................................................................................................
13
Technical Data ...................................................................................................
16
Maintenance and Storage
.................................................................................
18
Troubleshooting ................................................................................................
21
Limited Warranty ...............................................................................................
24
Contact Us .........................................................................................................
25
Introduction .......................................................................................................
6
Important
..........................................................................................................
2
Package Contents
.............................................................................................
6
Description of Product
.......................................................................................
7
App Installation
.................................................................................................
8
The Charging Station Installation
........................................................................
9
Operation
.........................................................................................................
3
Preparation
.......................................................................................................
4
Control Panel
...................................................................................................
13
Basic Operation
................................................................................................
14
Charging and Testing
........................................................................................
15
Signal Selection ................................................................................................
15
Maintenance
....................................................................................................
18
Cleaning the Mower
..........................................................................................
19
Reversing or Replacing the Blades
......................................................................
20
Software Update
..............................................................................................
20
Recycling and End-of-life Disposal
.....................................................................
20
Maintenance and Storage
..................................................................................
4
Symbols and Decals
...........................................................................................
5
Connect the charging station to the Boundary Wire
..............................................
13
Original instructions

Welcome
Safety warnings
Thank you for choosing Neomow S (referred to as 'the mower' or 'robotic mower'
in the manual).
Your robotic mower is designed to mow grass in ground areas where the slope
less than 18°. Collection of grass is not necessary because the fine grass
clippings serve as a natural fertilizer. You can enjoy the fun of carefree mowing
and always keep a perfectly maintained lawn. Furthermore, it is emission free,
convenient, hands-free and you can have a sound sleep while the mower is working!
Let this robotic mower housekeeper take care of your lawn!
Ensure no exits are blocked or obstructed by the machine.
DO NOT leave the machine to operate unattended if you know that there
are pets, children or people in the vicinity.
Carefully check the area where the tool is to be used for wildlife and
pets. Wildlife and pets may be injured while the machine is in operation.
Thoroughly check the working area and remove any stones, sticks, wires,
bones and foreign objects. When using the machine, ensure that no wildlife,
Operate the ON/OFF switch before working on or lifting the machine to make
sure you have turned it off.
Read all safety warnings and all instructions. Make yourself familiar with the
controls and the proper use of the machine. Please keep the instructions
safe for later use.
Important
DO NOT touch rotating blades that can cause injury. The blades are sharp.
Beware of severing toes or fingers. Wait until the machine completely stopped
before touching them.
Keep a safe distance to the product when operating, and make sure that
bystanders are not injuried by foreign objects being thrown away.
T ride on the machine.Children should be supervised to ensure that they
do not play with the machine.
DO NOT dispose of this product at will. It can cause injury to the environment.
2
EN
Original instructions

Operation
Preparation
Read the instructions carefully. Be familiar with the controls and the proper
use of the machine.
pets or small tree stumps are hidden in the dense grass. Avoid using
at dusk or in the dark to reduce the risk of encountering animals.
The operator or user is responsible for accidents or hazards occurring to
other people or their property.
NEVER allow children,persons with physical,senory or mental limitations or
a lack of experience and /or knowledge and/or people unfamiliar with these
instructions to use the product. Local regulations may restrict the age of the
operator.
If the mower makes an abnormal sound or signals an alarm, press the STOP
button immediately.
DO NOT touch moving hazardous parts before the mower has come to a
complete stop.
When carrying the lawn mower, turn it off and carry it as explained in this manual
with the blades facing away from you.
DO NOT use automatic lawn watering systems while the lawn mower is
operating, because the watering equipment may get damaged and the
likelihood of water penetrating into the lawn mower is greatly increased. Adjust
the work time of the lawn mower so that the watering systems and the lawn
mower do not operate at the same time.
Periodically inspect the area where the machine is to be used and remove
all stones, sticks, wires, bones, and other foreign objects. The Limited
Warranty does not cover damages caused by objects left on the lawn.
DO NOT modify the mower by yourself. Modifications could interfere with
mower operations, result in serious injury /damage, and void the Limited
Warranty. Use only approved parts and accessories.
3
EN
Original instructions

Maintenance and Storage
DO NOT run any live mains cables in the working area. If a mains cable
becomes entangled in the robotic mower it must be isolated before any
attempt to remove it.
Ensure the correct installation of the charging station and boundary wire
as instructed in this manual.
Before each mowing session, check that all parts of the mower can function
normally. DO NOT use the lawn mower if the outer casing is damaged. The
blade may accidently cut you or you may be injured by debris thrown off
by the blades.
Avoid mowing in bad weather conditions especially when there is a risk of
lightning,heavy rain or snow. It is recommended to mow in dry weather.
DO NOT operate the machine when barefoot or wearing open sandals. Always
wear substantial footwear and long trousers.
Warning signs shall be placed around the work area if the product is used in
public areas. The signs shall have the following text: Warning! Automatic lawn
mower! Keep away.
Operate the machine in a suitable ambient temperature to avoid that low/high
temperatures decrease mower performance and even lead to accidents.
Regularly check the machine to keep all nuts, bolts, and screws tight , be
sure of the machine is in safe working condition.
Replace worn or damaged parts for safety. Ensure that the replacement is
the matching type.
DO NOT place anything on the mower or the charging station.
DO NOT modify this product. Unauthorized modifications may impair the
safety of your product and may result in increased noise and vibration.
Ensure that batteries are charged using the correct charger recommended
by the manufacturer. Improper use may cause electric shock, overheating,
or leakage of corrosive liquid.
4
Unless damaged by hard obstacles, these blades can last for up to five
Weekly inspection of the blades and the fixing screws is advised. Note
When the first side becomes blunt, loosen the fixing screw and the blad
A set of spare blades is included with the Robotic Mower. More blades c
To ensure you get the best performance from your machine, always repla
Should your machine need a software update, contact our customer servi
• Check that the boundary wire in front and underneath the charger is i
• Check that the docking station's position is suitable as explained i
Robotic Mower runs in circles while mowing or while following boundary
• Verify that no power cable runs parallel and in close proximity the bou
• If a neighbor has a similar Robotic Mower, the signals may interfere.
• Grass may be too high. Try increasing the cutting height, or mow the l
Mower remains at or returns to docking station when pressing START but
• Check if the mower has already completed the programmed working time
The mobile displays a fault code when unexpected events occurs. Solve
Owner’s Manual
Class III appliance
Waste electrical products must not be disposed of with
exist. Check with your local authorities or retailer for rec
Owner’s Manual
Do not wash the machine with a high pressure washer
Class III appliance
Waste electrical products must not be disposed of with househ
exist. Check with your local authorities or retailer for recycling a
Waste ele ctrical pr oduct s must not be disposed of
exis t . Ch eck wit h your l ocal a ut horiti es or ret aile
Do not disp ose of batterie s. Ret urn exhaust ed batt er i es t
Waste ele ctrical pr oduct s must not be disposed of wit h h
exis t . Ch eck wit h your l ocal a ut horiti es or ret aile r f or
Owner’s Manual
Class III appliance
Waste electrical products must not be disposed of with household waste.
exist. Check with your local authorities or retailer for recycling advice.
Owner’s Manual E
EN
ou
Waste electrical products must not be disposed of with
exist. Check with your local authorities or retailer for rec
Waste electrical products must not be disposed of with househ
exist. Check with your local authorities or retailer for recycling a
Waste electrical products must not be disposed of with household waste.
E
Original instructions
e.e.

ase rec
se rec
d
usehold waste. Please recycle where facilities
ng advice.
waste. Please recycle where facilities
ce.
ase recycle where facilities
N
Symbols and Decals
During the winter season once the temperature is consistently below 5 °C,
store the mower and the docking station in a secure, dry place, out of the
reach of children.
Operate and store the mower only within a temperature range between 0 °C
and 40 °C. Too high temperatures can cause damage to the product. As an
example, do not leave the mower in the car in summer.
Please study the symbols on the product and labels carefully and
understand their meaning:
WARNING-Read instruction manual before operating the machine.
WARNING-Keep a safe distance from the machine when operating.
WARNING-DO NOT touch rotating blade.
Guaranteed sound power level value in 62 dB(A)
WARNING-DO NOT ride on the machine.
1.2 Information on the Landroid®
WARNING - Robotic lawnmower can be dangerous if incorrectly used.
Read through the Operator’s manual carefully and understand the content before usin
lawnmower.
WARNING - Keep a safe distance from the machine when operating.
WARNING – Operate the disabling device before working on or lifting the machine.
WARNING - Do not ride on the machine.
Do not burn
Do not expose to rain or water.
1.2 Information on the Landroid ®
WARNING - Robotic l awnmower c an be dangerous i f inco r r ectly used.
Read thr ough t he Oper at or ’ s manual car efull y and under st and t he c ont ent bef or e
l awnmower.
WARNING - Keep a safe dis t ance f romt he machine when opera tin g.
WARNING – Oper at e t he dis abli ng d evice bef ore working on o r li fting t he machine
WARNING - Do not r i de on t he machin e.
Do not burn
Do not expose t o rai n o r water.
Do not disp ose of batterie s. Ret urn exhaust ed bat t er i es t o your loc al c ollec t ion
1.2 Information on the Landroid ®
WARNING - Robotic l awnmower c an be dangerous i f inco r r ectly used.
Read thr ough t he Oper at or ’ s manual car efull y and under st and t he c ont ent bef or
l awnmower.
WARNING - Keep a saf e dis t ance f romt he machine when opera tin g.
WARNING – Oper at e t he dis abli ng d evice bef ore working on o r li f ting t he machi
WARNING - Do not r i de on t he machin e.
Do not burn
Do not expose t o rai n o r water.
Do not disp ose of batterie s. Ret urn exhaust ed batt er i es t o your loc al c ollec t io
1.2 Information on the Landroid ®
WARNING - Robotic l awnmower c an be dangerous i f inco r r ectly used.
Read thr ough t he Oper at or ’ s manual car efull y and under st and t he c ont ent bef or
l awnmower.
WARNING - Keep a safe dis t ance f romt he machine when opera tin g.
WARNING – Oper at e t he dis abli ng d evice bef ore working on o r li fting t he machin
WARNING - Do not r i de on t he machin e.
Do not burn
Do not expose t o rai n o r w
ater.
WARNING-Operate the disabling device before working on or lifting
the machine.
off
62dB
Extens
Measure
Installati
Installation G
This chapter e
installation.
ths of everyday use.
at the blades are double edged.
pside down and re-fix. Check
be purchased via customer
all three blades at the same
team for more information.
straight line.
his manual.
re back to docking
dary wire. If necessary, reposition
y setting your docking station and
n with an ordinary lawnmower
.
r that day.
problem as shown below.
EN
usehold waste. Please recycle where facilities
ng advice.
EN
waste. Please recycle where facilities
ce.
NE
h household wast e. Plea se r ecycle wher e f acilitie s
f or r ecycling advi ce.
NE
your loc al c ollec t ion or recycling point .
ehold wast e. Plea se r ecycle wher e f acilitie s
cycling advi ce.
EN
se recycle where facilities
N
5
1.2 Information on the Landroid®
WARNING - Robotic lawnmower can be dangerous if incorrectly used.
Read through the Operator’s manual carefully and understand the content before usin
lawnmower.
WARNING - Keep a safe distance from the machine when operating.
WARNING – Operate the disabling device before working on or lifting the machine.
WARNING - Do not ride on the machine.
Do not burn
Do not expose to rain or water.
Read thr ough t he Oper at or ’ s manual car efull y and under st and t he c ont ent bef or e
Do not disp ose of batterie s. Ret urn exhaust ed bat t er i es t o your loc al c ollec t ion
Read thr ough t he Oper at or ’ s manual car efull y and under st and t he c ont ent bef or
WARNING – Oper at e t he dis abli ng d evice bef ore working on o r li f ting t he machi
Do not disp ose of batterie s. Ret urn exhaust ed bat t er i es t o your loc al c ollec t io
Read thr ough t he Oper at or ’ s manual car efull y and under st and t he c ont ent bef or
WARNING – Oper at e t he dis abli ng d evice bef ore working on o r li fting t he machin
Extens
Measure
Installation G
This chapter e
EN
Read through the Operator’s manual carefully and understand the content before usin
e
Read through the Operator’s manual carefully and understand the content before usin
e
Original instructions

our robotic
sing
our robotic
ng
5
our robotic
sing your r obot ic
r recycling point .
using your r obot ic
or recycling point .
using your r obot ic
cord Switching Power Supply Wire pegs Spare blades
t ruler
e
ains how to install the Robotic Mower. Please read this completely before you start the
Introduction
Package Contents
Robotic Mower Charging station
Extension cord Wire pegs
Spare blades
Boundary wire User manual
Switching Power Supply
5
our robotic
5
ng your r obot ic
r recycling point .
5
using your r obot ic
or recycling point .
5
using your r obot ic
cord Switching Power Supply Wire pegs Spare blades
t ruler Boundary wire Manual
e
ains how to install the Robotic Mower. Please read this completely before you start the
User manual
Quick start guideCharging station
rubber plug
Quick start guide
Extension cord Switching Power Supply Wire pegs
Measurement ruler Boundary wire Manual
Installation
Installation Guide
This chapter explains how to install the Robotic Mower. Please read this
installation.
6
Extension cord Switching Power Supply Wire pegs
This chapter explains how to install the Robotic Mower. Please read this
EN
Original instructions

pare blades
mpletely before you start the
Description of Product
* Cutting height adjust knob – Adjust the height of the blade disc to set the height of
your lawn
1.Ultrasonic sensors 2.Charging port 3.Front wheel
4.Rear wheel 5.Blade disc 6.Blade
7.Battery compartment 8.Handle 9.Cutting height adjust knob
10.Start button 11.Stop button 12.Unlock button
13.Control panel 14.ON/OFF switch 15.Charging pins
16.Terminal for perimeter wire 17.Docking station control panel
18.Neomow S have another choice which without Ultrasonic sensors
* Start button – Start the mower (First START button, then OK button:Abnormal
removal, continue to work)
* Stop button – Stop the mower
* Unlock button – Interlock with STOP button, press this button will unlock the stop
model.
* Wire connector-Connect/Add twire to your original perimeter wire layout or to add an
inner boundary.
pare blades
mpletely before you start the
5 6 7 8
15 16 17
9 10 11 12 13 14
7
2
1
34
18
EN
Original instructions

Installation
App Installation
Note:
Please make a clean of your lawn, make sure there are no stones, no sticks, no wires,
no bones, and other foreign objects in your lawn.
The mower can navigate slopes up to a maximum of 33% or 18° incline or decline.
Take care of the objects that are less than 100mm high, remove them or mark them.
To ensure a successful setup, please scan the QR code to download the
app. Alternatively, go to the Google Play Store (Android) or the Apple App Store (iOS)
and search " ". After installing the app, please follow the APP guidelines .
There are two ways to connect the APP:
8
EN
Original instructions

The Charging Station installation
Choose a suitable position for the charging station
Note:
After the layout of boundary wire, it is needed that connect the charging station to
the boundary wire. And after testing drive, auto-charge successfully indicates that a
suitable position for charging is found. Now drive fixing pegs into ground fully.
The mower will only automatically return to the charging station counter-clockwise.
The mower receives direct sunlight for a prolonged period of time and the battery will
get too hot and not function correctly.
Install the charging station on a soft and flat surface. Do not place the charging
station too close to a slope, such as at the top of a hill or the bottom of a furrow.
Avoid left and right inclination in excess of 5 degrees. Once the position of the charging
station is confirmed and mains electrical connection is laid out, please do not connect
to main power yet. Finish all boundary layout work before connecting the charging
station to the power supply.
1.Via Bluetooth
2.Via WiFi/4G
Make sure your phone's Bluetooth is on, and keep the mower within 10m.
Make sure the WiFi/4G that your phone connected is WiFi/4G instead of 5GHz.
Make sure the WiFi/4G signal is available in the garden. It is necessary to connect
the Bluetooth icon before setting up the WiFi/4G connection. Connect both the
mower and your mobile to your WiFi/4G network.
＞ 5° ＞ 5°
9
EN
Original instructions

Do not dispose of batteries. Return exhausted batteries to your local collection or recy
Waste electrical products must not be disposed of with household waste. Please recy
Do not dispose of batteries. Return exhausted batteries to your local collection or recy
Waste electrical products must not be disposed of with household waste. Please recy
Pegging the boundary wire in a clockwise direction
2. And the recommended distance between two pegs is about 80cm in
straight lines(less in tight curves).Note that the pegs' hook and wire slit always
face the outside of the boundary. First plant the pegs, do not drive them fully
into the ground.
1. Strongly recommend mowing the lawn grass to 60mm or less before laying
out the boundary wire.
3. Use the boundary wire distance gauge to set the correct distance between
the wire and the border of your lawn (20-30cm). The further the two are from
each other, the lower chances of bad situations.
4. Encircling obstacles: roots, ponds, flowerbeds, landscape stone ect. This will
prevent your robotic mower colliding with objects or going straight into them.
Exclude any pools from the cutting area. For added safety, we recommend
placing a fence around the pool.
Owner’s Manual
Do not dispose of batteries. Return exhausted batteries to your local collection or recy
Do not wash the machine with a high pressure washer
Class III appliance
Waste electrical products must not be disposed of with household waste. Please recy
exist. Check with your local authorities or retailer for recycling advice.
launaMs’renwO
Do not wash t he machin e wit h a high pr essur e washer
Class I II a pplia nce
Waste ele ctrical pr oduct s must not be disposed of wit h household wast e. Plea se r
exis t . Ch eck wit h your l ocal a ut horiti es or re t aile r f or r ecycling advi ce.
launaMs’renwO
Do not wash t he machin e wit h a high pr essur e washer
Class I II a pplia nce
Waste ele ctrical pr oduct s must not be disposed of wit h household wast e. Plea se
exis t . Ch eck wit h your l ocal a ut horiti es or ret aile r f or r ecycling advi ce.
launaMs’renwO
Do not disp ose of bat terie s. Ret urn exhaust ed bat t er i es t o your loc al c ollec t io
Do not wash t he machin e wit h a high pr essur e washer
Class I II a pplia nce
Waste ele ctrical pr oduct s must not be disposed of wit h household wast e. Plea se
exis t . Ch eck wit h your l ocal a ut horiti es or ret aile r f or r ecycling advi ce.
We recommend c
This makes it
boundary wire
tools, like a h
Cutting limita
The Robotic Mo
higher than 10
When triggered
direction. St
long-term solu
Trees
The Robotic Mo
than 100mm, th
blades or rear
10
Owner’s Manual
Do not dispose of batteries. Return exhausted batteries to your local collection or recy
Do not wash the machine with a high pressure washer
Class III appliance
Waste electrical products must not be disposed of with household waste. Please recy
exist. Check with your local authorities or retailer for recycling advice.
Waste ele ctrical pr oduct s must not be disposed of wit h household wast e. Plea se r
Waste ele ctrical pr oduct s must not be disposed of wit h household wast e. Plea se
Do not disp ose of bat terie s. Ret urn exhaust ed bat t er i es t o your loc al c ollec t io
Waste ele ctrical pr oduct s must not be disposed of wit h household wast e. Plea se
We recommend c
This makes it
boundary wire
tools, like a h
Cutting limita
The Robotic Mo
higher than 10
When triggered
direction. Sti
long-term solu
The Robotic Mo
than 100mm, th
blades or rear
EN
Original instructions

EN
cling point.
where facilities
ycle wher e f acilitie s
ecycle wher e f acilitie s
or recycling point .
ecycle wher e f acilitie s
ting a draft of your lawn, including all obstacles and how these should be protected.
sier to find a good position for the docking station and how to correctly place the
und your garden perimeter protecting bushes, flower beds etc. You will also need some
er and wire cutters, pliers or scissors.
ns
is equipped with collision sensors. These will detect any rigid and fixed obstacles
, such as walls, fences and garden furniture.
he Robotic Mower will stop, reverse backwards and then continue mowing in a different
, protecting the obstacles running the boundary wire accordingly is the recommended
n.
treats trees as common obstacles, but if the roots of the tree are exposed and lower
area should be excluded using boundary wire in order to protect the tree root, cutting
els from damage.
5.Others
Paths, Driveways and Roads
If an elevated driveway crosses your lawn, better keep it outside the boundary wire.
Please allow a safety distance of 30cm between the driveway and the boundary
wire.
If the driveway and lawn are at the same level, feel free to use the boundary wire
to create a corridor. This allows your robotic mower to cross the driveway and
reach the opposite lawn.
c.Return the wire back to the perimeter（Note：the distance between two wires
requires less than 5mm and do not cross over the wires at any point ). Ensure
the distance from the wire around the object and lawn perimeter is at least 75cm
(if less than 75cm surround the object when installing the wire, leaving the object
outside of the lawn cutting area).
EN
cling point.
where facilities
NE
ycle wher e f acilitie s
NE
ecycle wher e f acilitie s
NE
or recycling point .
ecycle wher e f acilitie s
6
ting a draft of your lawn, including all obstacles and how these should be protected.
sier to find a good position for the docking station and how to correctly place the
und your garden perimeter protecting bushes, flower beds etc. You will also need some
er and wire cutters, pliers or scissors.
ns
is equipped with collision sensors. These will detect any rigid and fixed obstacles
, such as walls, fences and garden furniture.
he Robotic Mower will stop, reverse backwards and then continue mowing in a different
, protecting the obstacles running the boundary wire accordingly is the recommended
n.
treats trees as common obstacles, but if the roots of the tree are exposed and lower
area should be excluded using boundary wire in order to protect the tree root, cutting
els from damage.
6
We recommend creating a draft of your lawn, including all obstacles and ho
This makes it easier to find a good position for the docking station a
boundary wire around your garden perimeter protecting bushes, flower beds
tools, like a hammer and wire cutters, pliers or scissors.
Cutting limitations
The Robotic Mower is equipped with collision sensors. These will detect
higher than 100 mm, such as walls, fences and garden furniture.
When triggered, the Robotic Mower will stop, reverse backwards and then co
direction. Still, protecting the obstacles running the boundary wire
long-term solution.
Trees
The Robotic Mower treats trees as common obstacles, but if the roots of th
than 100mm, this area should be excluded using boundary wire in order to
blades or rear wheels from damage.
11
b.Continue circle around the objects in a clockwise direction. When going around
the object use more pegs. Remember to leave 30cm around the object to the wire!
a.Run the wire from the lawn perimeter to the object.
We recommend creating a draft of your lawn, including all obstacles and ho
This makes it easier to find a good position for the docking station a
boundary wire around your garden perimeter protecting bushes, flower beds
The Robotic Mower is equipped with collision sensors. These will detect
When triggered, the Robotic Mower will stop, reverse backwards and then co
direction. Still, protecting the obstacles running the boundary wire
The Robotic Mower treats trees as common obstacles, but if the roots of th
than 100mm, this area should be excluded using boundary wire in order to
EN
a
a
cling point.
where facilities
cling point.
where facilities
EN
Original instructions

n
these should be protected.
d how to correctly place the
tc. You will also need some
ny rigid and fixed obstacles
tinue mowing in a different
ccordingly is the recommended
tree are exposed and lower
rotect the tree root, cutting
If your neighbour is using the same mower, it will need to keep a distance of
0.5m away from your neighbour's boundary wires to prevent the two devices
interfering with each other. Ensure to position your charging station at least 10m
away from your neighbour's boundary wires.Make it clearly that your mower
and your neighbour's are using different signal(See below for more information).
Uneven lawn surfaces：We recommend leveling the lawn before using your robotic
mower or excluding uneven areas with the boundary wire.
these should be protected.
nd how to correctly place the
tc. You will also need some
ny rigid and fixed obstacles
tinue mowing in a different
ccordingly is the recommended
tree are exposed and lower
rotect the tree root, cutting
> 10m
> 10m
> 0.5m
P1 P2
12
ENEN
Original instructions

Operation
Connect the charging station to the Boundary Wire
Place the docking station at the end of the boundary wire so that the wire runs
lengthwise below the middle of the docking station. Connect that end to the left
(black) connector marked "F" (front). Connect the other end to the right (red)
connector marked "B" (back). Once the P1 or P2 LED confirms ,it means the
connection is successful
Once the relevant preparations have been made, learn how to control your mower!
F
B
10-15mm
13
STOP button Press this button, the mower will stop immediately.
2
1 2 3
4
8910 11 12
567
Unlock button Interlock with STOP button, press this button will unlock the stop model.
23
START button Start the mower (First START button , then OK button : Abnormal removal,
continue to work)
11 7
HOME button First HOME button , then OK button : the mower will return to charging
station.
4 4 7
ENEN
Original instructions

Basic Operation
4.Cutting height adjustment
The cutting height can be adjusted by rotating the height adjustment knob.
Cutting height range from 20mm- 55mm.
14
Signal select button Select signal either P1 or P2.
5
GPS signal indicator LED will remain on only when the GPS signal is normal.
11
Power indicator LED will remain on when the ON/OFF switch is on.
12
Rain sensor button Switch rain sensor On/Off. LED remain on to allow working in the
rain; Lights out, no work in the rain.
6
OK button Used with the Start/Home button.
7
8
Charging indicator LED will flash when the robotic mower is charging.
9
Signal indicator LED will remain on when the P1/P2 is selected.
1.Start mowing
Press Unlock button ,START button and OK button in order, then the
mower will start mowing.
3 1 7
2.Return to charging station
Press unlock button , then press HOME button and OK button
3 4 7
3.Stop the robotic mower
It is allowed to stop your robotic mower by pressing the STOP button in any
situations.The stop button has the highest priority, the robotic mower
will stop immediately in any case.
ENEN
Original instructions

Charging and Testing
Signal Selection
Note:
Successful docking and charging indicates that you have found a suitable position
for the docking station. You should now drive the fixing pegs into ground fully.
There are two signal which can be selected, P1 and P2. Make sure the mower
and charging station are using the same signal.
If your neighbour is using the same mower, ensure that both products are using
different signals. Please refer to the section of "Signal setting" in order to select
signal P1 or P2 for your installation.
After the successful connection of the charging station and boundary wire , test
the robotic mower's function. (If the mower is too power-low to start, place the
mower in the charging station. Make sure the charging is successful. )
Check the LED regularly to ensure fixing the boundary wire has not affected the
connection and signal shows P1 on the charging satation.
Then place the mower in the working area, a few meters beside the docking
station. Set the main power switch to "ON".
Press the buttons home and OK in order,a few seconds later,
the mower should automatically return to the charging station by locating and
following the boundary wire in anti-clockwise direction. If the mower fails to
dock correctly move the docking station to a more suitable location.
15
ENEN
Original instructions

Technical Data
Basic Information
Mower Parameters
Working Conditions
Net Weight
(Battery Included)
Cutting Height
Charging Time
GPS Working Mode
Working Temperature
20-55mm
150min
Yes
0℃~40℃
Cutting Width 18cm
Typical Mowing Time
(Per Full Charge ) 150min
Working Capacity
(Per Full Charge ) 300 m²
Material Plastic
Dimensions:
(Length × Width × Height) 48x38x26cm
14.4kg
Brand Hookii
Product Name Neomow S
16
ENEN
Original instructions

Owner’s Manual
Do not dispose of batteries. Return exhausted batteries to your local collection or recy
Do not wash the machine with a high pressure washer
Class III appliance
Waste electrical products must not be disposed of with household waste. Please recy
exist. Check with your local authorities or retailer for recycling advice.
Owner’s Manual
Do not dispose of batteries. Return exhausted batteries to your local collection or recy
Do not wash the machine with a high pressure washer
Class III appliance
Waste electrical products must not be disposed of with household waste. Please recy
exist. Check with your local authorities or retailer for recycling advice.
Input Voltage
Output Voltage
Output Current
100-240V~50/60Hz
22V
2.5A
Rated Power
Motor Type
Battery Type
Nominal Voltage
Nominal Capacity/Energy
Battery cycle times
4.4Ah
60W
Brushless
Lithium-lon
18V
600
IP Rating
Wi-Fi/Cellular Network
4G network service（4G）
IPX5
Max. Incline Inside
Working Area
Wireless Connection Y
Y
Y
Connectivity
Driving Motor
Power adapter
Battery Pack
18°（33%）
17
EN
Do not dispose of batteries. Return exhausted batteries to your local collection or recy
Waste electrical products must not be disposed of with household waste. Please recy
Do not dispose of batteries. Return exhausted batteries to your local collection or recy
Waste electrical products must not be disposed of with household waste. Please recy
Original instructions

ng point.
where facilities
ng point.
where facilities
EN
ng point.
where facilities
EN
ng point.
where facilities
Maintenance and Storage
Maintenance that is not mentioned in these instructions must be carried out by a
servicing agency authorised by the manufacturer. Only original parts are permitted.
Maintenance
Check and clean your robotic mower regularly and replace worn parts if necessary.
Preferably use a dry brush, a damp cloth or a sharpened wooden piece.Never use
flushing water. Following these maintenance instructions can extend your robotic
mower's service life.
Battery Life
For proper storage of the Li-Ion battery , make sure it is fully charged and kept in a
cool dry place. The life span of the battery depends on various factors. For more
details,please refer to Technical Data .
During winter, keep your mower, docking station and power supply in a dry place.
We recommend a shed, garage or preferably store them indoors.
Prepare your device for winter storage as follows:
1. Fully recharge the battery.
2. Set the mains power switch to "OFF".
3. Deeply clean your robotic mower.
4. Unplug the power supply from the mains outlet.
5.Disconnect the power supply from the charging station.
6.Disconnect the boundary wire from the charging station. Lift up the charging
station and clean. The boundary wire can remain outside. However, it is
imperative to protect the wire form corrosion. We recommend a water-free
grease or suitable sealing tape. If available, repack the product in the original
packaging. Alternatively, our service centre offers a winter service for your device,
which include a check-up guide of all parts and a software upgrade.
Winter Storage
18
ENEN
Original instructions