Kit Contents
1 x Handle
1 x Wand
1 x Hoselink Accessory Connector
1 x Fan Nozzle
1 x Jet Nozzle
The Super Jet Washer increases the velocity of the water
from your garden tap to produce a fine hard spray that
makes easy work of cleaning away stains, dirt and mud.
Easily clean cars, boats, wheel arches, windows, outdoor
furniture, guttering and more.
Assembly Instructions
STEP 1 Attach wand to handle
Screw the wand into the top of the handle.
STEP 2 Attach Accessory Connector to handle
Screw the Accessory Connector into the base of the handle.
STEP 3 Attach to hose
Attach to your Hoselink-fitted hose using a point and twist
motion.
Using the Super Jet Washer
There are two interchangeable brass spray heads
included with the Super Jet Washer.
– Fan Nozzle
– Jet Nozzle
Switching between spray nozzles is a simple process
of unscrewing the brass tip from the end of the wand
and replacing it with the alternate spray nozzle, which
is screwed securely to the handle of the wand for
safekeeping.
Water flow is easily controlled via the lever and can
either be turned on or off or increased/decreased
as needed.
NOTE As the Super Jet Washer relies on water pressure
for effective use, low water pressure will affect the
performance of this product. Water tanks are unlikely
to produce enough water pressure unless they are fitted
with a pump.
Storage and Maintenance
We recommend storing the Super Jet Washer in the
garage or shed when not in use. This will prolong the
life of the rubber grip on the handle and prevent salt
from affecting the spray heads in coastal conditions.
FAN NOZZLE JET NOZZLE
