Humanware Prodigi duo User manual

Page 1

CONTENTS

Chapter 1 –Introduction................................................................2

Chapter 2 –Getting to know your Prodigi .....................................3

Box Contents.............................................................................3

Prodigi Duo at a glance .............................................................4

Setting up ..................................................................................9

Chapter 3 –Using Prodigi...........................................................12

Using the Base ........................................................................12

Spot Reading .......................................................................12

Auto Reading .......................................................................14

Normal Reading...................................................................16

Manual Tasks.......................................................................17

Using the Tablet ......................................................................19

Magnifying............................................................................19

Capturing and Reading........................................................20

Chapter 4 –Using Standard Interface.........................................21

Using the Base (Standard Interface).......................................22

Spot Reading (Standard Interface)......................................22

Normal Reading (Standard Interface)..................................23

Auto Reading (Standard Interface)......................................25

Manual Tasks (Standard Interface)......................................25

Multi-Capture (Standard Interface) ......................................26

Using the Tablet (Standard Interface) .....................................27

Using the Magnifier (Standard Interface).............................27

Capturing and Reading (Standard Interface).......................28

Using the Carousel Menu........................................................29

Viewing saved Documents ......................................................30

Action menu.............................................................................31

Chapter 5 –Choosing your Contrast...........................................33

Chapter 6 –Viewing a Video.......................................................35

Chapter 7 –Changing your Settings...........................................36

Chapter 8 –Standing By and Powering off.................................40

Chapter 9 –Recharging your Tablet...........................................41

Page 2

Maximizing Operating Efficiency .............................................41

Recharging the Battery............................................................41

Chapter 10 –Software Update....................................................44

Chapter 11 –Troubleshooting.....................................................46

Appendix A: Safety and Maintenance.........................................48

Appendix B: Specifications..........................................................51

Appendix C: Warranty.................................................................52

CHAPTER 1 –INTRODUCTION

Thank you for purchasing Prodigi, the touch-controlled personal

vision assistant system from HumanWare, global leader in

assistive technologies for people who have low vision. Prodigi is a

simple, intelligent, portable, and adaptable line of products aimed

at restoring and maintaining independence for people living with

vision loss.

Prodigi Duo consists of a stationary Base and a removable Tablet,

allowing you to magnify and read documents on-the-go, continue

your favorite hobbies and activities, and carry out a wide range of

manual tasks.

Carefully read the operating and safety instructions described in

this user guide prior to using your Prodigi. This user guide

describes the system functions based on Prodigi’s manufacturer

default settings. If you have any questions about your system,

please contact HumanWare Customer Service by consulting the

contact information in the back of this user guide.

reserved. No part of this publication may be reproduced or

distributed in any form or by any means, or stored in a database or

retrieval system, without the prior written permission of

Technologies HumanWare Inc.

Page 3

CHAPTER 2 –GETTING TO KNOW YOUR

PRODIGI

BOX CONTENTS

Base box

Base Unit

Power Supply

Power Cable

Unboxing Guide

Getting Started Guide

User Guide

Packing and Unpacking Guide

Colored button overlay stickers

Tablet box

Prodigi 5-inch Tablet

Protective Carrying Case

Power Supply

USB Recharge Cable

Unboxing Guide

Getting Started Guide

User Guide

Warranty Sheet

Cleaning Tissue

Reading Stand

DVD

Screen box

20 or 24 inch screen

Page 4

PRODIGI DUO AT A GLANCE

BASE - Front Face

1. Screen

2. Viewing Zone

3. Control Panel

4. Plus-Minus keys

5. Audio Port

6. USB Ports (2)

7. Docking Station

Page 5

Control Panel

1. Speakers (2)

2. Settings Button

3. Back Button

4. Read Button

5. Touchpad

6. Touchpad Click

7. Zoom Up-Down Buttons

8. Power Button

Page 6

Back Side

1. Docking Station

2. Power Connector

3. USB Port (factory use)

Page 7

TABLET - Top Edge and Front Face

1. Plus-Minus keys

2. Power Button

3. Read Button

4. Speaker

5. Touchscreen

6. Back Button

Page 8

Bottom edge and back side

1. Audio Port

2. Recharge/Docking Station Port

3. Release Button (for battery)

4. Battery Compartment

5. LED Lights (2)

Prodigi

Page 9

SETTING UP

1. Pull the Base out of its box by holding the temporary cardboard

handle, and place it on a flat and level surface.

Note: The handle should only be used once.

Page 10

2. Make sure the surface is clean before placing the overlay stickers

on your front panel, then carefully place the stickers at their

appropriate location based on the images below:

Once you have placed the stickers, wait 10 minutes to make sure

they are well in place.

Page 11

3. Connect the Power Supply to the Power Cable. Then, connect

the cable to the Power Connector and plug it to an outlet.

4. The center of the screen should be at the same height as your

eyes, ideally 16 inches (40 cm) away. To adjust the screen’s

position, lift it up or down, tilt it forward or back, and swivel it left

or right.

40 cm/16”

Page 12

5. Place the Tablet on the Docking Station, screen side up and top

edge facing towards the back. Push the two latches inward to

connect the Tablet and power on the Base. Prodigi will take about

1 minute to initialize. HumanWare’s logo will appear on the

screen, followed by Prodigi’s startup screen.

Note: If the Tablet’s battery is drained, it may take a few minutes

of recharge for Prodigi to initialize. Let the Tablet recharge initially

on the docking station for 8 hours to fully recharge the battery.

CHAPTER 3 –USING PRODIGI

USING THE BASE

SPOT READING

After initializing, Prodigi will display a page placement frame

on screen. Place your document in the viewing zone:

Page 13

To quickly reach a section of the document, move the locator,

the rectangle at the bottom center of the screen, by slowly

moving your finger on the touchpad without lifting it (pan

gesture):

Click on the touchpad (press down on the lower section of

the touchpad until you hear a clicking sound) or press the

Zoom Up button to enlarge the section delimited by the

locator.

Pan to reach other parts of the enlarged image.

Press the Zoom Up button to zoom in and the Zoom Down

button to zoom out. You can also press and hold the Zoom

Up-Down buttons to progressively adjust the zoom level, and

release once you reach your desired zoom level.

To toggle between color, positive, and negative contrasts,

press the Settings button to access the Settings menu, scroll

down by panning upward on the touchpad to select Contrast,

and press the Zoom Up-Down buttons or click on the

touchpad to toggle between the different values. Press

Settings again to exit the Settings menu and return to your

document.

By default, Prodigi will read aloud the Settings’ menus, items,

and values. To deactivate Speech, access the Settings, select

Speech and set it to Off. Exit the Settings to return to your

document.

Page 14

While zoomed in, you can adjust the brightness of your

document by accessing the Settings menu. Use the Zoom Up-

Down buttons or click on the touchpad to adjust the brightness

of your document in percentage. Once you reach your desired

brightness level, exit the Settings or simply wait a few seconds

to continue magnifying.

Press Back to see the locator again. This is a practical way to

locate your position on the page.

Press Back again to reposition the locator at the bottom center

of the screen.

AUTO READING

As soon as you press Read, Prodigi will automatically capture,

scroll, and read aloud your document in Diamond Edge text

according to your preferences. Diamond Edge contrast will also be

available when toggling between contrasts.

After initializing, Prodigi will display a page placement frame

on screen. Place your document in the viewing zone:

To start reading from the top left corner of your document,

simply press Read. You will hear a clicking sound indicating

that your document has been captured, and Prodigi will scroll

your document according to your reading preferences.

Page 15

Note: To start reading from a specific place on your document,

before pressing Read, move the locator by panning, and press the

Zoom Up button or click on the touchpad to enlarge the text. Then,

press Read once you reach a section you want to read.

To adjust the volume, use the Plus-Minus keys (on the right

edge of the base plate; the Minus key is the one closest to

you).

To pause, press Read.

To resume, press Read again.

When paused, pan in any direction (Page mode), up or down

(Column mode), or left or right (Line mode) to go forward or

back in the text.

Note: Text can be presented in 3 different ways (Reading Modes):

it can be transformed into a single line in the Line mode, a column

in the Column mode (default), or you can read text without losing

its configuration in the Page mode. Two “greater than” inequality

signs will mark the end of a paragraph in the Line and Column

modes (˃˃). Prodigi will beep and announce “End of document”

when you reach the end of your document; press Read to start

reading from the beginning again.

To set a different Reading Mode, access the Settings, select

Reading Mode and toggle the value. Exit the Settings menu

to return to your document.

You can increase the speech rate by swiping to the left

(sliding and releasing your finger to the left) on the

touchpad, and decrease the speech rate by swiping to the

right. Note that changing the speech rate will change the

reading speed (text scrolling speed) accordingly.

Page 16

Note: You can also increase or decrease the speech rate from the

Settings. Access the Settings, select Speech Rate, and use the

Zoom Up-Down buttons or click on the touchpad to change the

value. Exit the Settings.

To deactivate Speech, access the Settings, select Speech

and set it to Off. When Speech is deactivated, you will be able

to change the reading speed (text scrolling speed) by swiping

left or right, or from the Settings (in the Visual menu and Text

submenu). In addition to deactivating speech from the

Settings, you can toggle between Speech On and Off when

reading a document by doing a double click (quickly

clicking twice on the touchpad) gesture. You can toggle

back to Speech On by pressing and holding the Read button

anywhere in the Settings menu.

Prodigi contains 2 different voices that can be used to read

aloud text documents. To select a different voice, access the

Settings, select Voice, and toggle between the 2 reading

voices. Exit the Settings to return to your document. Make

sure that the language of the selected voice is the same as in

the document you want to read.

You can adjust the contrast and the brightness in the same

way as when spot reading (see section Spot Reading above).

Press Back to stop reading and return to the page placement

frame.

NORMAL READING

Prodigi’s Read button can be set to Normal (the default value being

Auto) to instantly enlarge and display Diamond Edge text according

to your preferences with a single press (without reading it). After

Page 17

pressing Read a second time, Prodigi will scroll and read aloud the

text according to your reading preferences.

To set the Read button to Normal:

Access the Settings and select All Settings.

Select Gestures and Controls.

Select Read Button and set it to Normal.

Exit the Settings.

MANUAL TASKS

Prodigi is ideal for performing a wide range of manual tasks, such

as viewing pill bottles, signing checks, and more. It allows for

magnification up to 20x.

After initializing, Prodigi will display a frame on screen. Place

your object or document in the viewing zone:

Move the locator by panning to quickly reach a section of the

object or document you want to magnify:

Page 18

Press the Zoom Up button or click on the touchpad to enlarge

the section delimited by the locator at your preferred zoom

level:

You can navigate, zoom, adjust the brightness and change

contrasts in the same way as when reading a document (see

section Spot Reading above).

Press Back to see the locator again.

Press Back again to reposition the locator at the bottom center

of the screen.

Note: If the image is unstable while executing a manual task, you

can lock the Autofocus in the Settings. Access the Settings, select

Autofocus and set it to Locked. Exit the Settings. You can also

activate the double tap gesture from the Settings (Gestures and

Controls submenu) to lock and unlock the Autofocus.

Note: If you cannot avoid touching the touchpad while executing a

manual task, you can disable it in the Settings. Access the Settings,

select Touchpad and set it to Disabled. Exit the Settings.

Other manuals for Prodigi DUO

Table of contents

Humanware Prodigi DUO User manual