
1. Snap tray (B) and main mirror (A) together.
2. Battery Installation:
Press battery cover tab (C) downward and pull to open.
Insert 4-AAA type batteries (not included) according to
the polarity (+/-) marked in the battery compartment.
Replace battery cover, single battery compartment.
How to operate
• Press power switch (D) to ON. To turn lights ON press
the large circle (F) located on the mirror. To adjust the
brightness press and hold circle on mirror.
• USB cord (included)
• Angle and direction of mirror can be adjusted
as desired.
Battery Precautions
• All batteries must be of the same type.
• Do not mix old and new batteries.
• Do not mix alkaline, standard, or
rechargeable batteries.
• If battery contents are leaking, discontinue use and
discard.
• Remove dead batteries.
• Remove batteries if not in use.
• Make sure to properly dispose dead batteries in
accordance with state and local laws.
1.
2. 3.
A.
B.
C.
D.
USB port
F.