GFW JAK2TVMNG User manual

Size: 90 x 45 x 50 cm (WDH)
Colour: Mango
Finish: Melamine Veneer
Thank you for purchasing the Jakarta Two Drawer TV Unit.
Please read the instructions carefully to ensure safe operation of this product.
Batch No. 140317
Page 1of 13
JAKARTA TWO DRAWER TV UNIT ASSEMBLY INSTRUCTIONS
PLEASE READ this sheet prior to assembly to familiarise yourself with the various stages of construction.
Carefully open the pack supplied and check the contents against the parts and fittings check list. Do not
destroy any of the packaging until you are certain that you have all the necessary parts for the assembly.
CAUTION: There are small components used in the construction of this unit. These loose items should be
kept away from young children whilst assembling your unit to avoid the danger of choking.
Tools Required
Number of people
x2
1 Hour
Set Up

JAKARTA TWO DRAWER TV UNIT ASSEMBLY INSTRUCTIONS
Batch No. 140317
Page 2of 13
IMPORTANT - READ CAREFULLY - RETAIN THESE INSTRUCTIONS FOR
FUTURE REFERENCE.
INFORMATION
CARE INFORMATION
Never use scourers, abrasives or chemical cleaners.
To clean, wipe with a damp sponge and warm soapy water.
Do not use solvent based cleaners or detergents as they can bleach or damage the product.
WARNINGS
This product is designed to hold 30Kg in total, spread evenly over the whole unit.
Do not exceed this weight.
We recommend that this unit is assembled in the room intended for use.
When you are ready to start, make sure that you have the right tools, plenty of space and a
clean, dry area for assembly.
Unwrap all packaging materials and place the components on top of the carton box or on a
clean floor to prevent them from scratching.
Check the pack and make sure you have all the parts listed.
Ensure that this product is fully assembled as illustrated before use.
Check all screws or bolts are tightened and inspect regularly
Tools not included unless specified in parts list.
This product should only be used on a firm and level floor.
Keep small parts out of the reach of children.
Make sure the base remain in contact with the floor.
DO NOT
DO NOT
DO NOT
DO NOT
DO NOT
use power tools to construct this product.
tighten screws until parts are assembled or as advised in this guide.
over tighten screws or bolts.
use this product if parts are missing, damaged or worn.
sit or stand on the product.

JAKARTA TWO DRAWER TV UNIT ASSEMBLY INSTRUCTIONS
Batch No. 140317
Page 3of 13
Parts and Fittings Checklist
Please check the pack contents before assembling the product. If any components are missing,
please contact your retailer.
The fittings pack contains small items that should be kept away from children.
1
2
3
4
5
6
6
7
8
9
10
x2
11
12

JAKARTA TWO DRAWER TV UNIT ASSEMBLY INSTRUCTIONS
Batch No. 140317
Page 4of 13
General Hints & Tips
A26mm
A
A
B
Tighten
Stop when
level
All parts are packed in one carton
Size: 350 x 116 x 15 mm Size: 182 x 116 x 15 mm Size: 343 x 190 x 3 mm
Carton No: 1/1
Carton No: 1/1
Carton No: 1/1
Description: RH Drawer Side
Description: Drawer Back
Description: Drawer Base
Qty: 2
Qty: 2
Qty: 2
Carton No: 1/1
Carton No: 1/1
Carton No: 1/1
10
11
12
Qty: 1
Qty: 2
Qty: 2
Size: 896 x 440 x 3 mm
Size: 230 x 160 x 15 mm
Size: 350 x 116 x 15 mm
789
Description: Back Panels
Description: Drawer Front
Description: LH Drawer Side
Size: 798 x 448 x 30 mm
Carton No: 1/1
Description: Base Panel
Qty: 1
Description: Fixed Shelf
Qty: 1
Size: 798 x 448 x 30 mm
Carton No: 1/1
Description: Divider Panels
Qty: 2
Size: 447 x 166 x 30 mm
Carton No: 1/1
Carton No: 1/1
Carton No: 1/1
Carton No: 1/1
4
5
6
Qty: 1 Qty: 1 Qty: 1
Size: 900 x 450 x 50 mm
Size: 450 x 449 x 50 mm
Size: 450 x 449 x 50 mm
1
2
3
Description: Top Panel
Description: LH Side Panel
Description: RH Side Panel

Batch No. 140317
Page 5of 13
8
G
4
H
Screw for Drawer Part
(3.5x40mm)
Screw for Fitting Runner
and Back Panel
(3x12mm)
24A
24B
20C
E34
2F
Item QuantityCode
Handle (4x30mm)
Cam Lock
Dowel (8x30mm)
Cam Bolt
(35mm overall)
Fittings (to scale)
10 20 30 40 50 60 70 80
Carcass Screw for
Fitting Divider Panel to
Fixed Shelf and Fitting
Base (M7x60mm)
Fittings (not to scale)
QuantityCode Item
10
2
K
L
Cam Lock Cover
Handle
1M Allen Key (4mm)
D12
Nail for Fitting Back
(2x12mm)
Panel
JAKARTA TWO DRAWER TV UNIT ASSEMBLY INSTRUCTIONS
Screw for Fitting