In The Ditch ITD1598 User manual

OPERATIONS MANUAL
208-587-7960
www.InTheDitch.com
TM
Adjustable Trash Can/
Bucket Mount
ITD1598

2
Operations Manual
TM
ITEM# QTY DESCRIPTION PART #
1 1 Adjustable Trash Can/ Bucket Mount ITD1598
2 1 21” Bungee Chord ITD2150
1
2
Follow all State, Local and Federal regulations regarding cargo securement
WARNING
Below is a list of parts you will need to install an ITD1598 Adjustable Trash Can/ Bucket Mount.
Mounting hardware is NOT included with product.
Recommended Mounting Hardware
(4) 1/4” Bolts or Rivets ( Length varies due to mounting location )
(4) 1/4” Nylock Nuts
(8) 1/4” Flat Washers

3
Operations Manual
TM
1. Find Mounting Location
Place the Trash Can or Bucket on desired location. Make sure mount is installed in a safe location to
prevent secondary damage in the event of an accident. ITD recommends only using ITD Trash Cans.
Read all safety warnings & instructions carefully before mounting or
operating your mount
WARNING
2. Place Adjustable Trash Can/ Bucket Mount
Place the Adjustable Trash Can/ Bucket Mount on the desired location

4
Operations Manual
TM
ITD0449
208-587-7960
www.InTheDitch.com
TM
Inspect and re-tighten after the rst 10 uses
WARNING
Recommended Mounting Hardware (Not Included)
(4) 1/4” Bolts or Rivets
( Length varies due to mounting location )
(4) 1/4” Nylock Nuts
(8) 1/4” Flat Washers
3. Mark and Drill the Mount Hole Locations
4. Mount the ITD1598 Adjustable Trash Can/ Bucket Mount
Mount the ITD1598 Adjustable Trash Can/ Bucket Mount
with the recommended hardware.
Mark the mount hole locations of the ITD1598
Adjustable Trash Can/ Bucket Mount
Drill 1/4” holes on the mount locations