INDCO PSE84-BP User manual

INDCO, Inc. M-M-30131 Lift Stand - Electric date: 1/5/05
Mixer
Stands
- Electric Lift -
OWNERS
MANUAL
MIXER LIFT STAND
- Electric Winch Lift -
Model: Page
PSE84-BP - stationary ...2
PSE84 - portable “X” Base . . 3
PSE-BT-BP - stationary ...4
PSE-DL-BP - stationary ...4
PSE-BT - portable “Tote” Base . 5
PSE-DL - portable “Tote” Base . 5
Part List .....6
Warranty
Our products are guaranteed against
defective materials and workmanship, we will
repair or replace such items as may prove
defective at our option. Warranty period is
one year on items manufactured by INDCO.
On items not manufactured by INDCO, the
manufactures warranty applies. All
component parts of our products are covered
by this warranty, except for normal wear items
such as belts or impellers. We cannot be
responsible for damage or abuse to equipment
caused by improper installation or operation.
Warranties can also be voided by
unauthorized disassembly of equipment. For
warranty repairs, equipment is returned to
INDCO at the customer’s expense; we will
repair and return to customer at our expense.
Under no circumstances will we allow labor
charges or other expense to repair defective
merchandise. This warranty is exclusive and
is in lieu of all other warranties, whether
express or implied. INDCO shall not be liable
for any other damages, whether
consequential, indirect, or incidental, arising
from the sale or use of its products.
INDCO, Inc.
P.O. Box 589
New Albany, IN 47151
phone: [phone]
fax: [phone]
web: www.indco.com
PSE84
page 1 of 6

INDCO, Inc. M-M-30131 Lift Stand - Electric date: 1/5/05
PSE84-BP
Stationary Lift Stand
Features:
• Constructed from heavy gauge plate and square
tubing, carbon steel - painted.
• Capacity to lift up to 200 lbs.
• Electric winch actuation.
Operation:
• Height adjusts using a electric winch to raise &
lower mixer via a wire cable. Switch box with cord
and plug, operates on 115-volts, 60Hz, single-phase
and is not recommended for harzardous locations.
(Not Explosion Proof)
Assembly:
1. Mount winch base plate to top of upright tube as
shown with the hardware provided.
page 2 of 6
12” x 12” base
• 1/4” plate
FOUR - 9/16” x 1” slots
• 10” centers
power cord
with plug
electric
winch
92”
overall
height
mixer mount
max. 82”
min. 30”
switch
4”
7.75”

INDCO, Inc. M-M-30131 Lift Stand - Electric date: 1/5/05
PSE84
Portable Lift Stand
- “X” Base -
Features:
• Accommodates containers up to 48” diameter.
• Constructed from heavy gauge plate and square
tubing, carbon steel - painted.
• Capacity to lift up to 200 lbs.
• Units supplied with four swivel casters, two with
brakes.
• Electric winch actuation.
Operation:
• Height adjusts using a electric winch to raise & lower
mixer via a wire cable. Switch box with cord and
plug, operates on 115-volts, 60Hz, single-phase and is
not recommended for harzardous locations. (Not
Explosion Proof)
Assembly:
1. Mount winch base plate to top of upright tube as
shown with the hardware provided.
2. Slide tube ass’y over “stub”.
3. Mount 12” x 12” up-right base onto portable “X” base
with (4) 1/2” bolts, washers and nuts.
page 3 of 6
mixer mount
max. 89”
min. 37”
(assembled)
switch
power cord
with plug
electric
winch
4”
7.75”
98”
overall
height
(assembled)
(4) caster, swivel
12” x 12”
baseplate
(2) 3.5”
bolts
(2) 1.5”
bolts
40”
7.5”
30”
slide tube ass’y over “stub”.

INDCO, Inc. M-M-30131 Lift Stand - Electric date: 1/5/05
PSE-BT-BP
Stationary Lift Stand
page 4 of 6
12” x 12” base
• 1/4” plate
FOUR - 9/16” x 1” slots
• 10” centers
Features:
• Constructed from heavy gauge plate and square
tubing, carbon steel - painted.
• Capacity to lift up to 200 lbs.
• Electric winch actuation.
Operation:
• Height adjusts using a electric winch to raise &
lower mixer via a wire cable. Switch box with cord
and plug, operates on 115-volts, 60Hz, single-phase
and is not recommended for harzardous locations.
(Not Explosion Proof)
Assembly:
1. Mount winch base plate to top of upright tube as
shown with the hardware provided.
PSE-DL
&
PSE-DL-BP
mixer mount plate
& slide-tube
power cord
with plug
electric
winch
103.5”
overall
height
(assembled)
mixer mount
max. 94”
min. 30”
4”
7.75”
mixer mount
slide-tube
switch

INDCO, Inc. M-M-30131 Lift Stand - Electric date: 1/5/05
PSE-BT
Portable Lift Stand
- “Tote” Base -
page 5 of 6
mixer mount
max. 100”
min. 36”
(assembled)
4”
7.75”
mixer mount
slide-tube
(2) 3.5”
bolts
(2) 1.5”
bolts
(4) casters
12” x 12”
baseplate
56”
overall
width
50”
50”
inside
width
32”
switch
Features:
• Accommodates containers up to 48” diameter.
• Constructed from heavy gauge plate and square
tubing, carbon steel - painted.
• Capacity to lift up to 200 lbs.
• Units supplied with two rigid, two swivel casters,
two with brakes.
• Electric winch actuation.
Operation:
• Height adjusts using a electric winch to raise &
lower mixer via a wire cable. Switch box with
cord and plug, operates on 115-volts, 60Hz,
single-phase and is not recommended for
harzardous locations. (Not Explosion Proof)
Assembly:
1. Mount winch base plate to top of upright tube as
shown with the hardware provided.
2. Place up-right tube assembly onto the
portable “Tote” base.
3. Mount 12” x 12” up-right base onto portable “Tote”
base with (4) 1/2” bolts, washers and nuts.
power cord
with plug
electric
winch
109”
overall
height
(assembled)

INDCO, Inc. M-M-30131 Lift Stand - Electric date: 1/5/05
Parts List - Electric Lift Stands
Item Description Part no. Qty.
• “X” Base with Casters (complete) N-X-LIFT-BASE 1
• “Tote” Base with Casters (complete) N-PSBT-BASE 1
1. Winch complete, 0.6-HP, TEFC, single-phase MTR-W115 1
complete with cable & swtch ass’y.
1a. Base plate for winch, carbon steel HDW-ELECT-WINCH-PLATE 1
2. Caster, swivel - 3” dia. wheel HDW-4X618 2 ~ 4
3. Caster, rigid - 3” dia. wheel HDW-4X622 2
4. Caster brake kit (not shown) HDW-4X698 2
5a. short Bolt, hex-head - 1/2”-13 x 1.5” N-HARDWARE 2
5b. long Bolt, hex-head - 1/2”-13 x 3.5” N-HARDWARE 4
6. Flat washer - 1/2” (not shown) N-HARDWARE 6
7. Lock washer - 1/2” (not shown) N-HARDWARE 6
8. Nut - 1/2”-13 N-HARDWARE 6
page 6 of 6
“X” Base
5b
82 2
2
1
5a
1a
5b
8
5a 5b
8
1
3
2
2
“Tote” Base
1a
5b
8