Ingenico Smart Stand User manual

1
Smart Stand
Model:
MX-STAND-BODY

2
Safety Information
When using your tablet with the Dock it should be treated with care.
The information below has been provided in the interest of safety and
will help you to enjoy this product and the benefits it brings for many
years.
•DO NOT press down hard on the tablet PC screen when docked, as
this may damage the Pogo Pin Connector or Tablet Mount Points.
•DO NOT use or press down on the tablet PC screen with any sharp
objects, they may scratch the LCD screen.
•DO NOT place the Tablet PC on uneven or unstable work surface.
•DO NOT shove any foreign objects into the Tablet PC or Dock.
•DO NOT expose the Tablet PC to strong magnetic or electrical fields
•DO NOT expose the Tablet PC to direct sunlight, or leave the Tablet
PC facing the sun for long periods of time as it can damage the LCD
Screen.
•SAFE TEMP: This Dock should only be used in environments with
ambient temperatures between 0°C and 40°C
•DO NOT throw the Dock in municipal waste. Check local regulations
for disposal of electronic products.
•DO NOT use harsh chemicals, cleaning solvents or detergents to
clean the product. Wipe with a dry soft cloth or tissue paper to clean.

3
•INPUT RATING: Refer to the rating label on the product. Only use
attachments or accessories specified by the manufacturer.
•Check the connections between the main unit and attachments
before turning on the Tablet PC.
•ALWAYS unplug the mains power adaptor or a powered accessory,
hold and pull the plug, not the cord.
•DO NOT insert anything into the Tablet PC or Dock that may result in
short circuit or damage the circuit.
•Disconnect the product from the electrical outlet and remove any
installed batteries before cleaning.
•Keep the product and all of its part out of the reach of children.
•This product is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision or
instruction concerning the use of the appliance by a person responsible
for their safety.
•NEVER use a Tablet PC near emergency/intensive care medical
equipment, if you have a pacemaker fitted or during an electrical storm.
•CAUTION: Tablet PC’s have some metal parts to disperse heat.
•DO NOT block or cover slots, holes or openings on the products by
placing on soft furnishings such as carpets, rugs or beds as these are

4
provided for functionality and/or ventilation to ensure safe operation of
the products.
•DO NOT leave in low temperatures as moisture can form inside the
products, which may damage the circuit board.
•DO NOT leave in high temperatures as electronic devices and plastic
parts may warp in heat.
•Disconnect your Tablet PC and Dock from the mains power supply
during thunderstorms.
•Only use the power supply that came with the products. Using an
unauthorized power supply will invalidate your guarantee and may
irrecoverably damage the products.
•DO NOT attempt to open the product. This product does not contain
any user serviceable parts. Unauthorized handling of this product may
damage it and will void your warranty.
•To prevent possible hearing damage, do not listen at
high volume levels for long periods.
•If an equipment is provided with a replaceable battery, and if
replacement by an incorrect type could result in an explosion (for
example, with some lithium batteries).

5
1 Product Overview

6

7

8

9

10

11
2 Specifications
Input
USB
Pogo pin 10 pin
LED Power indicate
Green(Rear)
Output
Ethernet (RJ45)
RTL8152B , 10/100M
USB
Type A USB 2.0 * 3
Dimension
200*180*188 mm
Weight
Around 1415g

12
3 FCC Statements:
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful
interference to radio or reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
•Consult the dealer or an experienced technician for help.

13
MODIFICATION: Any changes or modifications not expressly
approved by the grantee of this device could void the user’s authority
to operate the device.