jbc SF280 User manual

GSF
Guide Kits for SF280
INSTRUCTION MANUAL

Allen Screws* ......................................... 2 units
Headless Screws* ................................ 3 units
Manual ....................................................... 1 unit
Ref. 0028099
Packing List
The following items are included:
Without Solder Wire Perforation:
GSF04D-B for wire Ø 0.4 mm / Ø 0.016 in
GSF05D-B for wire Ø 0.5 mm / Ø 0.020 in
GSF06D-B for wire Ø 0.6 mm / Ø 0.025 in
GSF08D-B for wire Ø 0.7 - 0.8 mm / Ø 0.028 - 0.032 in
GSF10D-B for wire Ø 0.9 - 1.0 mm / Ø 0.035 - 0.040 in
GSF12D-B for wire Ø 1.1 - 1.2 mm / Ø 0.043 - 0.047 in
GSF15D-B for wire Ø 1.3 - 1.5 mm / Ø 0.051 - 0.059 in
GSF16D-B for wire Ø 1.6 mm / Ø 0.063 in
This manual corresponds to the following references:
With Solder Wire Perforation:
GSF08V-B for wire Ø 0.8 mm / Ø 0.032 in
GSF10V-B for wire Ø 1.0 mm / Ø 0.040 in
GSF12V-B for wire Ø 1.2 mm / Ø 0.047 in
GSF15V-B for wire Ø 1.5 mm / Ø 0.059 in
GSF16V-B for wire Ø 1.6 mm / Ø 0.063 in
GSF Guide Set for SF280 with Solder Wire Perforation
Intermediate Nozzle
Guide Tube* ............................................. 1 unit
Inlet Nozzle* ............................................. 1 unit
Guide Wheel* ........................................... 1 unit
Counter Wheel* ....................................... 1 unit
Blade Clamp* ........................................... 1 unit
Blade* ......................................................... 1 unit
Intermediate Nozzle* ............................. 1 unit
Outlet Nozzle*.......................................... 1 unit
*references see table on page 4
Guide Tube
Inlet Nozzle Guide Wheel
Outlet Nozzle
Blade Clamp
Blade
Counter Wheel
Headless Screws
Allen Screws
2

The following items are included:
Packing List
Guide Tube* ............................................. 1 unit
Inlet Nozzle* ............................................. 1 unit
Traction Wheel* ....................................... 1 unit
Support Wheel* ....................................... 1 unit
Counter Wheel* ....................................... 1 unit
Intermediate Nozzle* ............................. 1 unit
Outlet Nozzle* .......................................... 1 unit
*references see table on page 5
GSF Guide Set for SF280 without Solder Wire Perforation
Intermediate Nozzle
Traction Wheel
Outlet Nozzle
Counter Wheel
Support Wheel
Headless Screws
Guide Tube
Inlet Nozzle
Allen Screws
Allen Screws*......................................... 2 units
Headless Screws*................................ 3 units
Manual ....................................................... 1 unit
Ref. 0028099
3
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm

GSF Guide Set for SF280
with Solder Wire Perforation
4

GSF Guide Set for SF280
without Solder Wire Perforation
5
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm

OK
OK
Changing Guide Sets
1. Assemble the counter wheel (1).
2. Insert the intermediate nozzle (2) until its collar
rests against the housing and tighten the screw.
3. Assemble the inlet nozzle (3).
4. Assemble the guide wheel (4) and tighten the
screw.
5. Assemble the blade first, then mount the
blade clamp (5) onto the same axis and tighten
the screw. Caution: handle the blade carefully
to avoid injury.
Assembly with Solder Wire Perforation Assembly without Solder Wire Perforation
Changing Wheels and Blade
For this operation, disconnect the device from the mains. Disconnect the tool from the control unit
and open its cover.
First disassemble the guide tube (6), the nozzles (2)+(3), then the Wheels, Blade and Clamp (4)+(5).
Disassemble the Counter Wheel (1). Use the allen key and the spanner, provided with SF.
1. Assemble the counter wheel (1).
2. Insert the intermediate nozzle (2) until its collar
rests against the housing and tighten the screw.
3. Assemble the inlet nozzle (3).
4. Assemble the traction wheel (4) onto the axis
and tighten the screw.
5. Assemble the support wheel (5) and tighten
the screw.
Blade
Blade Clamp
Inlet
Nozzle
Guide
Wheel
Intermediate
Nozzle
Traction
Wheel
Support
Wheel
Intermediate
Nozzle
Inlet
Nozzle
Counter
Wheel
Counter
Wheel
1
4
1
2
3
4
5
5
4
2
3
66
6

AP250
AL250
AL250
SF280
SF250
ALE250
AP250
AL250
AL250
SF280
SF250
ALE250
3
4
Replacing the Guide Tube
Once the tool is disconnected from the control unit follow the instructions below:
1. Disassemble the outlet nozzle (1) from the guide tube.
2. Open the guide clamp (2), take off the guide tube (3) and insert the new one.
Note: The guide tube length can be easily adjusted (4) when the guide clamp knob (2) is open.
4. Once the guide tube length is adjusted close the guide clamp knob (2).
5. Assemble the outlet nozzle (1) onto the guide tube tip.
Guide Clamp
Knob
Guide
Tube
Outlet
Nozzle
SF280 Automatic
Solder Feed Handle
1
Guide
Tube
2
SF280 Automatic
Solder Feed Handle
7
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm

Main MenuMain Menu
5 Tin Reload Process
6 Counters
7 Software Version
1 Reset settings
2 Station settings
3 Tool settings
4 Programs Settings
ExitExit
Ba ckward Forward
Reload ProcessReload Process
Press enter when finished
OK
OK
OK
Tool Assembly
Connect the tool to the control unit following
this steps:
1. Insert and push the guide nozzle until the end
and tighten the screw.
2. Connect the jack.
Solder Wire Loading
1. Put the solder reel into its support.
2. Introduce the solder wire into the inlet nozzle
until it reaches the wheels.
3. Use the Tin Reload Process in Main Menu by
pressing the tool button
The Relaod Procees screen opens.
4. Make sure the wire passes through the
Intermediate Nozzle and enters into the
Guide Tube.
1
2
Inlet
Nozzle
1
2
Insert to the end
4
3
Intermediate
Nozzle
To Guide Tube
SF280 Automatic
Solder Feeder
Station
SF280
Automatic
Solder Feeder Station
8

Notes
9
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm

Notes
10

GSF
Guide Kits for SF280
With Perforation:
Ref.: GSF08V-B wire Ø 0.8 mm / Ø 0.032 in
Ref.: GSF10V-B wire Ø 1.0 mm / Ø 0.040 in
Ref.: GSF12V-B wire Ø 1.2 mm / Ø 0.047 in
Ref.: GSF15V-B wire Ø 1.5 mm / Ø 0.059 in
Ref.: GSF16V-B wire Ø 1.6 mm / Ø 0.063 in
Without Perforation:
Ref.: GSF04D-B wire Ø 0.4 mm / Ø 0.016 in
Ref.: GSF05D-B wire Ø 0.5 mm / Ø 0.020 in
Ref.: GSF08D-B wire Ø 0.7 - 0.8 mm / Ø 0.028 - 0.032 in
Ref.: GSF10D-B wire Ø 0.9 - 1.0 mm / Ø 0.035 . 0.040 in
Ref.: GSF12D-B wire Ø 1.1 - 1.2 mm / Ø 0.043 - 0.047 in
Ref.: GSF15D-B wire Ø 1.3 - 1.5 mm / Ø 0.051 - 0.059 in
Ref.: GSF16D-B wire Ø 1.6 mm / Ø 0.063 in
- Guide Tube Length: 126 cm / 49.6 in
- Package Dimensions: 245 x 185 x 45 mm
(L x W x H) 9.65 x 7.28 x 1.77 in
Complies with CE standards.
ESD safe
Specifications
Total Net Weight: Package Weight:
108 g / 0.24 lb 200 g / 0.44 lb
108 g / 0.24 lb 200 g / 0.44 lb
94 g / 0.21 lb 186 g / 0.41 lb
94 g / 0.21 lb 186 g / 0.41 lb
94 g / 0.21 lb 186 g / 0.41 lb
104 g / 0.23 lb 196 g / 0.43 lb
104 g / 0.23 lb 196 g / 0.43 lb
104 g / 0.23 lb 196 g / 0.43 lb
104 g / 0.23 lb 196 g / 0.43 lb
90 g / 0.20 lb 182 g /0.40 lb
90 g / 0.20 lb 182 g /0.40 lb
90 g / 0.20 lb 182 g /0.40 lb
11
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm

This product should not be thrown in the garbage.
In accordance with the European directive 2012/19/EU, electronic equipment at the end of its life must
be collected and returned to an authorized recycling facility.
Warranty
JBC’s 2 year warranty covers this equipment against
all manufacturing defects, including the replacement
of defective parts and labour.
Warranty does not cover product wear or misuse.
In order for the warranty to be valid, equipment must
be returned, postage paid, to the dealer where it was
purchased.
Get 1 extra year JBC warranty by registering here:
https://www.jbctools.com/productregistration/
within 30 days of purchase.
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm
0028099-1221