Jenn-Air JMV9186W User instructions

Product dimension, cutout and installation specifications are provided for planning purposes only. Before installing
any product, be sure to verify cutout dimensions and electrical/gas connections as actual product dimensions may vary.
JENN-AIR® DETAILED PLANNING DIMENSIONS 1 of 4
JRC120060A 07/2012
OvER-ThE-RANGE MIcROwAvE OvENS
JMV9186W, JMV8208W – 297⁄8" x 171⁄4" x 171⁄2"
PRODUcT DIMENSIONS
FRONT VIEW
MODEL #
JMV9186W
JMV8208W
in cm
AOverall width 297⁄876.0
BWidth of door 241⁄262.3
CWidth of control panel 51⁄413.3
DHeight of trim 3 7.6
EHeight of door 13 33.1
FOverall height 171⁄443.8
GDepth without door 141⁄836.0
HDepth with door 157⁄840.2
I
Depth with handle
Pro-Style®Stainless 181⁄845.9
Euro-Style (color-coordinating) 171⁄244.5
JDepth with door open 90° 39 99.1
KDepth of ventilation/lamp housing 121⁄431.0
LHeight of door and trim 161⁄441.3
*Optional filler kits available for width of 36" (91.4 cm).
TOp VIEW
Back of
Cabinet
A
A
G
H
I
J
J
I
H
G
K
L
F
B C
D
E
F
Back of
Cabinet
A
A
G
H
I
J
J
I
H
G
K
L
F
B C
D
E
F
Back of
Cabinet
A
A
G
H
I
J
J
I
H
G
K
L
F
B C
D
E
F
SIDE VIEW

Product dimension, cutout and installation specifications are provided for planning purposes only. Before installing
any product, be sure to verify cutout dimensions and electrical/gas connections as actual product dimensions may vary.
JENN-AIR® DETAILED PLANNING DIMENSIONS 2 of 4
JRC120060A 07/2012
OPENING/cLEARANcE DIMENSIONS
FRONT VIEW
e
A
C
B
D
Side
Cabinet
E
Mounting Plate
MODEL #
JMV9186W
JMV8208W
in cm
AWidth of cabinet opening (min.) 30 76.2
BHeight from cooking surface
to floor — —
C
Suggested distance from
top of cabinet opening to
cooking surface
30 76.2
DHeight from floor to top of cabinet
opening (B + C = D) — —
EDepth of upper cabinet (min.-max.) 12-14 30.5-
35.6
eRecommended electrical connection location
OvER-ThE-RANGE MIcROwAvE OvENS
JMV9186W, JMV8208W – 297⁄8" x 171⁄4" x 171⁄2"
SIDE VIEW BACK VIEW
ELECTRICAL REQUIREMENTS
120 volt, 60 Hz, AC only, 15- or 20-amp fused, electrical supply
is required. A time-delay fuse or dedicated circuit is recommended.
Do not use an extension cord.
VENTING REQUIREMENTS
The microwave oven is factory set for recirculating ventilation.
To vent through the roof or wall, refer to installation instructions
for further information.
LOCATION REQUIREMENTS
Support structure must be able to support 150 lb (68 kg) including
microwave oven and upper cabinet including contents.
Mounting plate must attach to a minimum of one 2" x 4"
(5.1 cm x 10.2 cm) wall stud.
Minimum distance between a fixed wall on the hinged-side
of the door and the microwave oven is 6" (15.2 cm).
e
A
C
B
D
Side
Cabinet
E
Mounting Plate
e
A
C
B
D
Side
Cabinet
E
Mounting Plate

Product dimension, cutout and installation specifications are provided for planning purposes only. Before installing
any product, be sure to verify cutout dimensions and electrical/gas connections as actual product dimensions may vary.
JENN-AIR® DETAILED PLANNING DIMENSIONS 3 of 4
JRC120060A 07/2012
vENTILATION SELEcTION chART – cOOkTOPS
MODEL #
pRO-STYLE™ HOODS
EURO-STYLE
ISLAND-MOUNT HOODS
EURO-STYLE
WALL-MOUNT HOODS
GLASS
COLLECTION
ISLAND-MOUNT
HOOD
GLASS COLLECTION
WALL-MOUNT HOODS
pERIMETRIC
HOOD
OILED BRONzE
WALL-MOUNT HOODS
EURO-STYLE TELESCOpING
DOWNDRAFT SYSTEMS
CUSTOM
HOOD LINERS
OVER-THE-
RANGE
MICROWAVE
OVENS
JXW9048Wp
JXW9036Wp
JXU9136Wp
JXW9030Wp
JXU9130Wp JXI8042WS JXI8036WS
JXW8036WS
JXW8836WS JXW8030WS JXI5036WS JXW5036WS JXW5030WS JXp5032WS JXW6036WR JXW6030WR JXD7036YS JXD7030YS
UXL6048YSSA
UXL6036YSSA
JMV9186W
JMV8208W
INDUCTION COOKTOpS
36-INCH
JIC4536X – 5 Elements n n —★ ★ ★ —★ ★ —★n—★—★n
30-INCH
JIC4430X – 4 Elements n n n n ★ ★ ★ ★ ★ ★ ★ n n ★ ★ ★ n
CONVENTIONAL GAS COOKTOpS
36-INCH (less than 60,000 BTU total)
JGC9536BD – 5 Burners n n —★ ★ ★ —★ ★ —★ ★ —★—★n
JGC1536AD – 5 Burners n n —★ ★ ★ —★ ★ —★n—★—★n
JGC8536BD – 5 Burners n n —★ ★ ★ —★ ★ —★n—★—★n
30-INCH (less than 60,000 BTU total)
JGC9430BD – 4 Burners n n n n ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ n
JGC1430AD – 4 Burners n n n n ★ ★ ★ ★ ★ ★ ★ n n ★ ★ ★ n
JGC8430CD – 4 Burners n n n n ★ ★ ★ ★ ★ ★ ★ n n ★ ★ ★ n
CONVENTIONAL ELECTRIC COOKTOpS
36-INCH
JEC4536Y – 5 Elements n n —★ ★ ★ —★ ★ —★n—★—★n
JEC9536BD – 5 Elements n n —★ ★ ★ —★ ★ —★ ★ —★—★n
JEC8536BD – 5 Elements n n —★ ★ ★ —★ ★ —★n—★—★n
30-INCH
JEC4530Y – 5 Elements n n n n ★ ★ ★ ★ ★ ★ ★ n n ★ ★ ★ n
JEC9530BD – 5 Elements n n n n ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ n
JEC8430BD – 4 Elements n n n n ★ ★ ★ ★ ★ ★ ★ n n ★ ★ ★ n
A. Custom hood liners can be used with any of the following blower motors: UXB1200DYS, UXB0600DYS, UXI1200DYS or UXI0600DYS.
KEY
★Style and Performance Pair
nPerformance Pair
— Not Recommended

Product dimension, cutout and installation specifications are provided for planning purposes only. Before installing
any product, be sure to verify cutout dimensions and electrical/gas connections as actual product dimensions may vary.
JENN-AIR® DETAILED PLANNING DIMENSIONS 4 of 4
vENTILATION SELEcTION chART – RANGETOPS AND RANGES
MODEL #
pRO-STYLE™ HOODS
EURO-STYLE
ISLAND-MOUNT HOODS
EURO-STYLE
WALL-MOUNT HOODS
GLASS
COLLECTION
ISLAND-MOUNT
HOOD
GLASS COLLECTION
WALL-MOUNT HOODS
pERIMETRIC
HOOD
OILED BRONzE
WALL-MOUNT HOODS
EURO-STYLE
TELESCOpING
DOWNDRAFT
SYSTEMS CUSTOM HOOD LINERS
OVER-THE-
RANGE
MICROWAVE
OVENS
JXW9048Wp
JXW9036Wp
JXU9136Wp
JXW9030Wp
JXU9130Wp JXI8042WS JXI8036WS
JXW8036WS
JXW8836WS JXW8030WS JXI5036WS JXW5036WS JXW5030WS JXp5032WS JXW6036WR JXW6030WR
JXD7036YS
JXD7030YS
UXL6048YSS
UXL6036YSS
JMV9186W
JMV8208W
1200 or
600 CFMA600 CFMB
pRO-STYLE®RANGETOpS
48-INCH (more than 60,000 BTU total)
JGCP548WP – 6 Burners & Griddle ★—————— — ————— — ★— —
36-INCH (less than 60,000 BTU total)
JGCP536WP – 4 Burners & Griddle ★ ★ —nnn—n n —n n — — ★ ★ —
36-INCH (more than 60,000 BTU total)
JGCP436WP – 6 Burners ★ ★ — — — — — — — — — — — — ★— —
30-INCH (less than 60,000 BTU total)
JGCP430WP – 4 Burners n★ ★ n n n n n n n n n n —★ ★ —
48-INCH (less than 60,000 BTU total)
JGD8348CDP – 4 Burners & Grill Assembly — — — — — — — — — — — — — — ★— —
pRO-STYLE®DUAL-FUEL AND GAS RANGES
48-INCH (more than 60,000 BTU total)
JDRP548WP – 6 Burners & Griddle ★—— — — — — — — — — — — — ★— —
JGRP548WP – 6 Burners & Griddle ★—————— — ———— — —★— —
36-INCH (less than 60,000 BTU total)
JDRP536WP – 4 Burners & Griddle ★ ★ —nnn—n n —n n — — ★ ★ —
JGRP536WP – 4 Burners & Griddle ★ ★ —nnn—n n —n n — — ★ ★ —
36-INCH (more than 60,000 BTU total)
JDRP436WP – 6 Burners ★ ★ —— — — — — — — — — — — ★— —
JGRP436WP – 6 Burners ★ ★ ————— — ————— —★— —
30-INCH (less than 60,000 BTU total)
JDRP430WP – 4 Burners — ★ ★ —n n n n n n n n n —★ ★ —
JGRP430WP – 4 Burners — ★ ★ —n n n n n n n n n —★ ★ —
SLIDE-IN RANGES
Dual-Fuel and Gas Conventional (less than 60,000 BTU total)
JDS8860BDP – 4 Burners n★ ★ n★★★ ★ ★★★ n n —★ ★ n
JDS8850CD – 4 Burners nnnn★★★ ★ ★★★ n n —★ ★ n
JGS8860BDP – 4 Burners n★ ★ n★★★ ★ ★★★ n n —★ ★ n
JGS8850CD – 4 Burners nnnn★ ★ ★ ★ ★ ★ ★ ★ ★ —★ ★ n
ELECTRIC CONVENTIONAL
JES8850CA – 5 Elements nnnn★★★ ★ ★★★ n n —★ ★ n
A. Custom hood liners can be used with any of the following blower motors: UXB1200DYS, UXB0600DYS, UXI1200DYS or UXI0600DYS.
B. Blower motor UXB0600DYS is rated for up to 65,000 BTUs and can be used with the rangetops and ranges indicated.
KEY
★Style and Performance Pair
nPerformance Pair
— Not Recommended
JRC120060A 07/2012