Jio JioFi User manual

JioFi
5 steps
to be connected
everywhere.

1 Know your JioFi
Signal
Indicator
Power
Button
WPS button
Connection
Indicator
Wi-Fi
Indicator
Battery
Indicator
WPS
USB
connector

2 Open the back cover and locate
SIM/SD card slot. Slide the SIM/SD
tray downwards (OPEN) to lift the
tray up. Further insert the SIM/SD
card and slide the tray upwards
(LOCK) to secure the tray. Make
sure they are placed properly with
the chip facing down.
SIM

3 Remember or write down the SSID
（Service Set Identifier）and
Password mentioned in the battery
compartment before inserting the
battery and replacing back cover.
SIM
Commo di ty Nam e: Rou te r M2S (Bl ac k)
SSID : JioFi 2_XX XXXX
PWD: X XXXX XXXXX
Sys tem Log IN
RSN : RPEMFX XXXXX XXXX
MAC I D: XXXX XXXXX XXX
IMEI: XXXXXXXXXXXXXXX
EAN : 693269 48205 93
IP:http://ji ofi .local.html
1.26 W/kg
USE RNAM E/PW D:
adm inis trat or/ admi nis trat or
Made in China

4 The Setup is done. Now Turn ON
your device and connect upto 31
WiFi enabled devices on your
wireless network by using the SSID
and password

To connect quickly, press WPS
Button for 3 seconds and then press
the WPS button on your wireless
device to connect.

5 Welcome to your digital life.
Download Jio4GVoice on your smart
phone to enable HD Voice Calling
and Video Calling using your JioFi.
*JioFi will work with Jio Sim card only.

About your device
Charging the device
When charging the battery for the first
time, it is recommended to charge it to
100% with adapter and cable provided
in turned OFF position.
Charging Time
USB Cable ~ Approx 7hrs
Power adapter ~Approx 3hrs 30 mins
Battery life on LTE*
*Depends on network conditions
Stand by time ~Approx 300hrs
Running time ~Approx 6-7hrs

Turning the device ON or OFF
To turn ON/OFF the device , press and
hold the Power key for 3 seconds.
Resetting the device
Occasionally, you may need to perform
a Hardware or Factory reset when you
forget login username or password. To
reset the device insert a small pin
( such as a straightened paper-clip )into
the Reset button for 1 second.
SIM

Indicators
I
ndicator
S
tatus
S
tate
Signal
indicator
Blinking fast No SIM card
Blinking slow
Weak signal or No service
available
On Medium signal
On Good signal
Connection
indicator
Blink
LTE network connected and have
data
traffic
On LTE network connected but no
Off LTE network disconnected
Wi-Fi
indicator
On Wi-Fi on,1 or more Wi-Fi client
Off Wi-Fi off
WPS
indicator
On
WPS on (it will be off once the
user is connected or after 2 minutes)
Off WPS off
connected to device
data traffic
Blink Wi-Fi on,no Wi-Fi client
connected to device

Remark :The system might enter sleep mode after
some time of inactivity. In case the device goes into
sleep mode press the power button lightly to bring
it back to active mode.
During sleep mode, the SSID of your JioFi will stop
broadcasting and a breathing light can be seen on
the power button.
Battery
indicator
On Battery level 5%~19%
Blink Battery level < 5% and the device will
be switched off after a few minutes
On Battery level 20%~59%
On Battery level 60%~100%
(While charging it means fully charged)
Running Charging and not fully charged yet.
Blink
2 scenarios :
（1）While charging but no battery in
device.
（2）Insufficient charge in battery for
device to power on.
On Power save mode
Blink Normal mode
Off Switch off
Power Key

Manage your Device
Using the Web Configuration utility
Change the network name（SSID）, the
Security Mode and Key, configure the
sleep mode and other settings.
Connect your Computer/Smartphone to JioFi
device over USB or Wi-Fi interface.
Enter the URL : http://jiofi.local.html in address bar
of the browser to open the web configuration page
Click on Login button on right top corner of web
page screen by using “administrator” as username
and password to access the homepage of Web
Configuration utility.
Customize network, wifi and other parameters and
access SD card over wifi using the web
configuration utility. You can also customize some
settings by accessing the JioFi widget. Download
the MyJio App and access the above widget.
Certain end user applications like Online Console
gaming and Online streaming like DVR need certain
ports to be opened. Kindly check for Gaming and
Apps Management Tab in Web Configuration Utility
for more details and for further help please contact
Jio Care.
1
2
3
4
5

A user connected access the Internet
Please check if the user is connected to JioFi SSID.
Make sure your SIM card is properly inserted.
Check if your JioFi is connected to the network.
Ensure your sim card is activated and has adequate
data balance available.
Not able to change my device
settings
Please connect computer/smartphone to your JioFi
device over USB/wifi interface.
Enter http://jiofi.local.html in the browser’s URL input
field. Click on the “Login” button on top right corner
of your webpage screen. The default username and
password is“administrator” .
Cannot establish a WiFi connection
Please make sure the WiFi function is active on your
JioFi. Refresh the network list and select the correct
SSID. Type the correct network key (WiFi password)
when you connected to device.
For fast support

Safety
To the Owner
Always keep the device at a distance of 20cm from
medical devices like hearing aids, pacemakers as it
may interfere when the device is turned on. It is
advisable to consult your physician or the manufacturer
of the medical device before using your device.
Avoid using device in areas with high electromagnetic
radiations.
Be aware of the usage limitation when using your
device at places such as aircrafts, petrol stations,
hospitals, oil warehoused or chemical factories, where
there are explosives gases or explosive products being
processed. Turn off your device if required.
Do not open and touch the inner area of your device as
it may affect your device performance.
Keep the device out of children’s reach. Your device
may cause injury if used as a toy.
Do not touch metallic parts of your device as they may
become hot when the device is working.

Using your Device
Use only original and authorized accessories.
Unauthorized accessories may affect your device
performance.
Do not expose your device to moisture or water.
Handle carefully. Do not drop!
Kindly use your device with a Nano Sim card only. Do
not try to insert sim card of any other size as this may
lead to damage to sim slot connector pins and might
render your device useless.
Please avoid all night charging of the device.
Battery Usage precautions
DO NOT - short circuit or try to disassemble the battery
as it may cause fire.
Always store battery in cool dry place.
Always use genuine and authorized charger to charge
the battery.
Replace worn out battery with authorized and genuine
battery.
Dispose worn out battery in an appropriate way.
Battery to be used for intended purpose only.

Information
Technical specifications
General
Supported OS
Input voltage 5V
Output Voltage
Maximum power 3.2W
consumption
Memory 2GB SLC NAND and 1Gbit LPDDR2
External interfaces Micro-USB port
Nano-SIM Card interface
Micro-SD card interface(up to 32GB)
Operating Temp.charge Charging: 0℃~+40℃
Discharge: 0℃~+60℃
Dimensions(L*W*H) 85*55*16mm
No.of device supported 31(WiFi)+1(USB tethering)
Bands
Standards compliance WAN:LTE(2300/1800/850MHz)
WLAN: IEEE 802.11b/g/n 2.4G only
Battery
Rated Capacity 2300mAh
Maximum charge 4.35V
voltage
Power adaptor
Input power supply AC 100~240V
Output power supply DC 5V
Environmental
Ambient temperature Operating:0℃~+40℃
Storage：-20℃~+60℃
Humidity 5% to 95%(non-condensing)
SAR Body Value
Win10/MAC/Linux
WinXP(SP3 onwards)/Vista/Win7/Win8
4.35V Maximum
1.26 W/kg

With love, from Jio
Reach us
If you have further question or require personal
assistance, please contact JioCare by calling or
sending on email.
Phone: 198 from your Jio number or
1800-88-99999 from any network
（24 Hrs.）
Email: [email protected]
Visit www.jio.com
We wish you a beautiful experience
with Jio.