Jio JioFi JMR1140 User manual

2Open the back cover and install the
SIM and SD cards. To install the
SIM card, insert the SIM card with
the IC chip facing down. To install
the SD card, slide the SD tray
downwards (OPEN) to lift the tray,
insert the SD card with the IC chip
facing down, and slide the tray
upwards (LOCK) to secure the tray.
4The Setup is done. Now Turn ON
your device and connect up to 31
WiFi enabled devices on your
wireless network by using the SSID
and password.
To connect quickly, press WPS
button for 3 seconds and then
press the WPS button on your
wireless device to connect.
5 Welcome to your digital life.
Download Jio4GVoice on your
smart phone to enable HD Voice
Calling and Video Calling using your
JioFi.
* JioFi works with Jio SIM card only.
About your device
Charging the device
When charging the battery for the first time,
it is recommended to charge it to 100% with
adapter and cable provided in turned OFF
position.
Charging time
USB Cable ~ Approx. 6hrs 10mins
Power adapter ~ Approx. 3hrs 30mins
Battery life on LTE*
*Depends on network conditions
Standby time ~ Approx. 480hrs
Running time ~ Approx. 7-8hrs
Turning the device ON or OFF
To turn ON the device, press and hold the
Power button for 1 second.
To turn OFF the device, press and hold the
Power button for 3 seconds.
Resetting the device
Occasionally, you may need to perform a
Factory reset when you forget login username
or password. To reset, press the Power
button and the WPS button simultaneously
for 5 seconds. The four LED indicators will
blink in blue at the same time.
Indicators
*Sleep mode (Low power consumption)
Your device will enter a sleep mode after some
time (when there is no device connected).
Short press the Power button to bring it back to
active state. This time period can be altered
through WebGUI or managed devices section of
MyJio App or jio.com.
Manage your device
Using the Web Configuration utility
Change the network name (SSID), the
Security Mode and Key, configure the
sleep mode and other settings.
Connect your Computer/Smartphone to JioFi
device over USB or WiFi interface.
Enter the URL: http://jiofi.local.html in address bar
of the browser to open the web configuration
page.
Click the 'Login' button on the top right corner of
web page screen by using 'administrator' as
username and password to access the homepage
of Web Configuration utility.
Customize network, WiFi and other parameters
and access SD card over WiFi using the web
configuration utility. You can also customize some
settings by accessing the JioFi widget. Download
the MyJio App and access the above widget.
Certain end user applications like online console
gaming and online streaming like DVR need certain
ports to be opened. Kindly check for Gaming and
Apps Management Tab in Web Configuration
Utility for more details, and for further help please
contact
JioCare.
For fast support
A user cannot access the Internet
Please check if the user is connected to JioFi SSID.
Make sure your SIM card is properly inserted.
Check if your JioFi is connected to the network.
Ensure your sim card is activated and has adequate
data balance available.
Not able to change my device settings
Please connect computer/smartphone to your JioFi
device over USB/WiFi interface.
Enter http://jiofi.local.html in the browser’s URL
input field. Click the 'Login' button on the top right
corner of your web page screen. The default
username and password are 'administrator'.
Cannot establish a WiFi connection
Please make sure the WiFi is active on your JioFi.
Refresh the network list in your computer/smart-
phone and select the correct SSID. Type the correct
network key (WiFi password) when you connected to
your JioFi.
Safety
To the Owner
Always keep the device at a distance of 20cm from
medical devices like hearing aids, pacemakers as it
may interfere while the device is turned on. It is
advisable to consult your physician or the manufactur-
er of the medical device before using your device.
Avoid using device in areas with high electromagnetic
radiations.
Avoid overnight charging of the device.
Be aware of the usage limitation when using your
device at places such as aircrafts, petrol stations,
hospitals, oil warehouses or chemical factories, where
there are explosive gases or explosive products being
processed. Turn off your device if required.
Do not open and touch the inner area of your device
as it may affect your device performance.
Keep the device out of children’s reach. Your device
may cause injury if used as a toy.
Do not touch metallic parts of your device as they may
become hot when the device is working.
Using your Device
Use only original and authorized accessories.
Unauthorized accessories may affect your device
performance.
Do not expose your device to moisture or water.
Handle carefully. Do not drop!
Kindly use your device with a Nano Sim card only. Do
not try to insert sim card of any other size as this may
lead to damage to sim slot connector pins and might
render your device useless.
Battery Usage precautions
DO NOT - short circuit or try to disassemble the
battery as it may cause fire.
Always store battery in cool dry place.
Always use genuine and authorized charger to charge
the battery.
Replace worn out battery with authorized and genuine
battery.
Dispose worn out battery in an appropriate way.
Battery to be used for intended purpose only.
Information
Technical specifications
General
Supported OS WinXP (SP3 onwards)/Vista/Win7/
Win8/Win10/MAC/Linux
Input voltage
5V
Output voltage
4.35V Maximum
Maximum power
3.5W
consumption
Memory
2Gbit ROM and 2Gbit RAM
External interfaces
Micro-USB port
Nano-SIM card interface
Micro-SD card interface (up to 32GB)
Operating temp. charge
Charging: 0 ˚C~+40 ˚C
Discharge: 0 ˚C~+60 ˚C
Dimensions (L*W*H)
88.7 x 78.9 x 16.6mm
No. of device supported
31(WiFi) + 1(USB tethering)
Bands
Standards compliance
WAN: LTE (2300/1800/850MHz)
WLAN: IEEE 802.11b/g/n 2.4G only
Battery
Rated capacity
2,600mAh
Maximum charge voltage
4.35V
Power adaptor
Input power supply
AC 100~240V
Output power supply
DC 5V
Environmental
Ambient temperature
Operating: 0 ˚C~+40 ˚C
Storage: -20 ˚C~+60 ˚C
Humidity
5% to 95% (non-condensing)
SAR body value
0.843 W/kg
3Remember or write down the SSID
(Service Set Identifier) and
Password mentioned in the battery
compartment before inserting the
battery and replacing back cover.
JioFi
5 steps
to be connected
everywhere.

2Open the back cover and install the
SIM and SD cards. To install the
SIM card, insert the SIM card with
the IC chip facing down. To install
the SD card, slide the SD tray
downwards (OPEN) to lift the tray,
insert the SD card with the IC chip
facing down, and slide the tray
upwards (LOCK) to secure the tray.
4The Setup is done. Now Turn ON
your device and connect up to 31
WiFi enabled devices on your
wireless network by using the SSID
and password.
To connect quickly, press WPS
button for 3 seconds and then
press the WPS button on your
wireless device to connect.
5 Welcome to your digital life.
Download Jio4GVoice on your
smart phone to enable HD Voice
Calling and Video Calling using your
JioFi.
* JioFi works with Jio SIM card only.
About your device
Charging the device
When charging the battery for the first time,
it is recommended to charge it to 100% with
adapter and cable provided in turned OFF
position.
Charging time
USB Cable ~ Approx. 6hrs 10mins
Power adapter ~ Approx. 3hrs 30mins
Battery life on LTE*
*Depends on network conditions
Standby time ~ Approx. 480hrs
Running time ~ Approx. 7-8hrs
Turning the device ON or OFF
To turn ON the device, press and hold the
Power button for 1 second.
To turn OFF the device, press and hold the
Power button for 3 seconds.
Resetting the device
Occasionally, you may need to perform a
Factory reset when you forget login username
or password. To reset, press the Power
button and the WPS button simultaneously
for 5 seconds. The four LED indicators will
blink in blue at the same time.
Indicators
*Sleep mode (Low power consumption)
Your device will enter a sleep mode after some
time (when there is no device connected).
Short press the Power button to bring it back to
active state. This time period can be altered
through WebGUI or managed devices section of
MyJio App or jio.com.
Manage your device
Using the Web Configuration utility
Change the network name (SSID), the
Security Mode and Key, configure the
sleep mode and other settings.
Connect your Computer/Smartphone to JioFi
device over USB or WiFi interface.
Enter the URL: http://jiofi.local.html in address bar
of the browser to open the web configuration
page.
Click the 'Login' button on the top right corner of
web page screen by using 'administrator' as
username and password to access the homepage
of Web Configuration utility.
Customize network, WiFi and other parameters
and access SD card over WiFi using the web
configuration utility. You can also customize some
settings by accessing the JioFi widget. Download
the MyJio App and access the above widget.
Certain end user applications like online console
gaming and online streaming like DVR need certain
ports to be opened. Kindly check for Gaming and
Apps Management Tab in Web Configuration
Utility for more details, and for further help please
contact
JioCare.
For fast support
A user cannot access the Internet
Please check if the user is connected to JioFi SSID.
Make sure your SIM card is properly inserted.
Check if your JioFi is connected to the network.
Ensure your sim card is activated and has adequate
data balance available.
Not able to change my device settings
Please connect computer/smartphone to your JioFi
device over USB/WiFi interface.
Enter http://jiofi.local.html in the browser’s URL
input field. Click the 'Login' button on the top right
corner of your web page screen. The default
username and password are 'administrator'.
Cannot establish a WiFi connection
Please make sure the WiFi is active on your JioFi.
Refresh the network list in your computer/smart-
phone and select the correct SSID. Type the correct
network key (WiFi password) when you connected to
your JioFi.
Safety
To the Owner
Always keep the device at a distance of 20cm from
medical devices like hearing aids, pacemakers as it
may interfere while the device is turned on. It is
advisable to consult your physician or the manufactur-
er of the medical device before using your device.
Avoid using device in areas with high electromagnetic
radiations.
Avoid overnight charging of the device.
Be aware of the usage limitation when using your
device at places such as aircrafts, petrol stations,
hospitals, oil warehouses or chemical factories, where
there are explosive gases or explosive products being
processed. Turn off your device if required.
Do not open and touch the inner area of your device
as it may affect your device performance.
Keep the device out of children’s reach. Your device
may cause injury if used as a toy.
Do not touch metallic parts of your device as they may
become hot when the device is working.
Using your Device
Use only original and authorized accessories.
Unauthorized accessories may affect your device
performance.
Do not expose your device to moisture or water.
Handle carefully. Do not drop!
Kindly use your device with a Nano Sim card only. Do
not try to insert sim card of any other size as this may
lead to damage to sim slot connector pins and might
render your device useless.
Battery Usage precautions
DO NOT - short circuit or try to disassemble the
battery as it may cause fire.
Always store battery in cool dry place.
Always use genuine and authorized charger to charge
the battery.
Replace worn out battery with authorized and genuine
battery.
Dispose worn out battery in an appropriate way.
Battery to be used for intended purpose only.
Information
Technical specifications
General
Supported OS WinXP (SP3 onwards)/Vista/Win7/
Win8/Win10/MAC/Linux
Input voltage
5V
Output voltage
4.35V Maximum
Maximum power
3.5W
consumption
Memory
2Gbit ROM and 2Gbit RAM
External interfaces
Micro-USB port
Nano-SIM card interface
Micro-SD card interface (up to 32GB)
Operating temp. charge
Charging: 0 ˚C~+40 ˚C
Discharge: 0 ˚C~+60 ˚C
Dimensions (L*W*H)
88.7 x 78.9 x 16.6mm
No. of device supported
31(WiFi) + 1(USB tethering)
Bands
Standards compliance
WAN: LTE (2300/1800/850MHz)
WLAN: IEEE 802.11b/g/n 2.4G only
Battery
Rated capacity
2,600mAh
Maximum charge voltage
4.35V
Power adaptor
Input power supply
AC 100~240V
Output power supply
DC 5V
Environmental
Ambient temperature
Operating: 0 ˚C~+40 ˚C
Storage: -20 ˚C~+60 ˚C
Humidity
5% to 95% (non-condensing)
SAR body value
0.843 W/kg
3Remember or write down the SSID
(Service Set Identifier) and
Password mentioned in the battery
compartment before inserting the
battery and replacing back cover.
1 Know your JioFi
WiFi indicator
USB charging port
Power
button
Power
indicator
Network signal
strength
indicator
Battery
indicator
WPS
button

2Open the back cover and install the
SIM and SD cards. To install the
SIM card, insert the SIM card with
the IC chip facing down. To install
the SD card, slide the SD tray
downwards (OPEN) to lift the tray,
insert the SD card with the IC chip
facing down, and slide the tray
upwards (LOCK) to secure the tray.
4The Setup is done. Now Turn ON
your device and connect up to 31
WiFi enabled devices on your
wireless network by using the SSID
and password.
To connect quickly, press WPS
button for 3 seconds and then
press the WPS button on your
wireless device to connect.
5 Welcome to your digital life.
Download Jio4GVoice on your
smart phone to enable HD Voice
Calling and Video Calling using your
JioFi.
* JioFi works with Jio SIM card only.
About your device
Charging the device
When charging the battery for the first time,
it is recommended to charge it to 100% with
adapter and cable provided in turned OFF
position.
Charging time
USB Cable ~ Approx. 6hrs 10mins
Power adapter ~ Approx. 3hrs 30mins
Battery life on LTE*
*Depends on network conditions
Standby time ~ Approx. 480hrs
Running time ~ Approx. 7-8hrs
Turning the device ON or OFF
To turn ON the device, press and hold the
Power button for 1 second.
To turn OFF the device, press and hold the
Power button for 3 seconds.
Resetting the device
Occasionally, you may need to perform a
Factory reset when you forget login username
or password. To reset, press the Power
button and the WPS button simultaneously
for 5 seconds. The four LED indicators will
blink in blue at the same time.
Indicators
*Sleep mode (Low power consumption)
Your device will enter a sleep mode after some
time (when there is no device connected).
Short press the Power button to bring it back to
active state. This time period can be altered
through WebGUI or managed devices section of
MyJio App or jio.com.
Manage your device
Using the Web Configuration utility
Change the network name (SSID), the
Security Mode and Key, configure the
sleep mode and other settings.
Connect your Computer/Smartphone to JioFi
device over USB or WiFi interface.
Enter the URL: http://jiofi.local.html in address bar
of the browser to open the web configuration
page.
Click the 'Login' button on the top right corner of
web page screen by using 'administrator' as
username and password to access the homepage
of Web Configuration utility.
Customize network, WiFi and other parameters
and access SD card over WiFi using the web
configuration utility. You can also customize some
settings by accessing the JioFi widget. Download
the MyJio App and access the above widget.
Certain end user applications like online console
gaming and online streaming like DVR need certain
ports to be opened. Kindly check for Gaming and
Apps Management Tab in Web Configuration
Utility for more details, and for further help please
contact
JioCare.
For fast support
A user cannot access the Internet
Please check if the user is connected to JioFi SSID.
Make sure your SIM card is properly inserted.
Check if your JioFi is connected to the network.
Ensure your sim card is activated and has adequate
data balance available.
Not able to change my device settings
Please connect computer/smartphone to your JioFi
device over USB/WiFi interface.
Enter http://jiofi.local.html in the browser’s URL
input field. Click the 'Login' button on the top right
corner of your web page screen. The default
username and password are 'administrator'.
Cannot establish a WiFi connection
Please make sure the WiFi is active on your JioFi.
Refresh the network list in your computer/smart-
phone and select the correct SSID. Type the correct
network key (WiFi password) when you connected to
your JioFi.
Safety
To the Owner
Always keep the device at a distance of 20cm from
medical devices like hearing aids, pacemakers as it
may interfere while the device is turned on. It is
advisable to consult your physician or the manufactur-
er of the medical device before using your device.
Avoid using device in areas with high electromagnetic
radiations.
Avoid overnight charging of the device.
Be aware of the usage limitation when using your
device at places such as aircrafts, petrol stations,
hospitals, oil warehouses or chemical factories, where
there are explosive gases or explosive products being
processed. Turn off your device if required.
Do not open and touch the inner area of your device
as it may affect your device performance.
Keep the device out of children’s reach. Your device
may cause injury if used as a toy.
Do not touch metallic parts of your device as they may
become hot when the device is working.
Using your Device
Use only original and authorized accessories.
Unauthorized accessories may affect your device
performance.
Do not expose your device to moisture or water.
Handle carefully. Do not drop!
Kindly use your device with a Nano Sim card only. Do
not try to insert sim card of any other size as this may
lead to damage to sim slot connector pins and might
render your device useless.
Battery Usage precautions
DO NOT - short circuit or try to disassemble the
battery as it may cause fire.
Always store battery in cool dry place.
Always use genuine and authorized charger to charge
the battery.
Replace worn out battery with authorized and genuine
battery.
Dispose worn out battery in an appropriate way.
Battery to be used for intended purpose only.
Information
Technical specifications
General
Supported OS WinXP (SP3 onwards)/Vista/Win7/
Win8/Win10/MAC/Linux
Input voltage
5V
Output voltage
4.35V Maximum
Maximum power
3.5W
consumption
Memory
2Gbit ROM and 2Gbit RAM
External interfaces
Micro-USB port
Nano-SIM card interface
Micro-SD card interface (up to 32GB)
Operating temp. charge
Charging: 0 ˚C~+40 ˚C
Discharge: 0 ˚C~+60 ˚C
Dimensions (L*W*H)
88.7 x 78.9 x 16.6mm
No. of device supported
31(WiFi) + 1(USB tethering)
Bands
Standards compliance
WAN: LTE (2300/1800/850MHz)
WLAN: IEEE 802.11b/g/n 2.4G only
Battery
Rated capacity
2,600mAh
Maximum charge voltage
4.35V
Power adaptor
Input power supply
AC 100~240V
Output power supply
DC 5V
Environmental
Ambient temperature
Operating: 0 ˚C~+40 ˚C
Storage: -20 ˚C~+60 ˚C
Humidity
5% to 95% (non-condensing)
SAR body value
0.843 W/kg
3Remember or write down the SSID
(Service Set Identifier) and
Password mentioned in the battery
compartment before inserting the
battery and replacing back cover.
RSN: RAMMFLC00000001
IMEI: 911504950000010
SSID: JioFi4_000000
PWD: abcd000000
MAC ID: 581D91000000
EAN: 8809423980096
System Log IN
USERNAME/PWD:
administrator
Commodity: Router JMR1140(Black)

2Open the back cover and install the
SIM and SD cards. To install the
SIM card, insert the SIM card with
the IC chip facing down. To install
the SD card, slide the SD tray
downwards (OPEN) to lift the tray,
insert the SD card with the IC chip
facing down, and slide the tray
upwards (LOCK) to secure the tray.
4The Setup is done. Now Turn ON
your device and connect up to 31
WiFi enabled devices on your
wireless network by using the SSID
and password.
To connect quickly, press WPS
button for 3 seconds and then
press the WPS button on your
wireless device to connect.
5 Welcome to your digital life.
Download Jio4GVoice on your
smart phone to enable HD Voice
Calling and Video Calling using your
JioFi.
* JioFi works with Jio SIM card only.
About your device
Charging the device
When charging the battery for the first time,
it is recommended to charge it to 100% with
adapter and cable provided in turned OFF
position.
Charging time
USB Cable ~ Approx. 6hrs 10mins
Power adapter ~ Approx. 3hrs 30mins
Battery life on LTE*
*Depends on network conditions
Standby time ~ Approx. 480hrs
Running time ~ Approx. 7-8hrs
Turning the device ON or OFF
To turn ON the device, press and hold the
Power button for 1 second.
To turn OFF the device, press and hold the
Power button for 3 seconds.
Resetting the device
Occasionally, you may need to perform a
Factory reset when you forget login username
or password. To reset, press the Power
button and the WPS button simultaneously
for 5 seconds. The four LED indicators will
blink in blue at the same time.
Indicators
*Sleep mode (Low power consumption)
Your device will enter a sleep mode after some
time (when there is no device connected).
Short press the Power button to bring it back to
active state. This time period can be altered
through WebGUI or managed devices section of
MyJio App or jio.com.
Manage your device
Using the Web Configuration utility
Change the network name (SSID), the
Security Mode and Key, configure the
sleep mode and other settings.
Connect your Computer/Smartphone to JioFi
device over USB or WiFi interface.
Enter the URL: http://jiofi.local.html in address bar
of the browser to open the web configuration
page.
Click the 'Login' button on the top right corner of
web page screen by using 'administrator' as
username and password to access the homepage
of Web Configuration utility.
Customize network, WiFi and other parameters
and access SD card over WiFi using the web
configuration utility. You can also customize some
settings by accessing the JioFi widget. Download
the MyJio App and access the above widget.
Certain end user applications like online console
gaming and online streaming like DVR need certain
ports to be opened. Kindly check for Gaming and
Apps Management Tab in Web Configuration
Utility for more details, and for further help please
contact
JioCare.
For fast support
A user cannot access the Internet
Please check if the user is connected to JioFi SSID.
Make sure your SIM card is properly inserted.
Check if your JioFi is connected to the network.
Ensure your sim card is activated and has adequate
data balance available.
Not able to change my device settings
Please connect computer/smartphone to your JioFi
device over USB/WiFi interface.
Enter http://jiofi.local.html in the browser’s URL
input field. Click the 'Login' button on the top right
corner of your web page screen. The default
username and password are 'administrator'.
Cannot establish a WiFi connection
Please make sure the WiFi is active on your JioFi.
Refresh the network list in your computer/smart-
phone and select the correct SSID. Type the correct
network key (WiFi password) when you connected to
your JioFi.
Safety
To the Owner
Always keep the device at a distance of 20cm from
medical devices like hearing aids, pacemakers as it
may interfere while the device is turned on. It is
advisable to consult your physician or the manufactur-
er of the medical device before using your device.
Avoid using device in areas with high electromagnetic
radiations.
Avoid overnight charging of the device.
Be aware of the usage limitation when using your
device at places such as aircrafts, petrol stations,
hospitals, oil warehouses or chemical factories, where
there are explosive gases or explosive products being
processed. Turn off your device if required.
Do not open and touch the inner area of your device
as it may affect your device performance.
Keep the device out of children’s reach. Your device
may cause injury if used as a toy.
Do not touch metallic parts of your device as they may
become hot when the device is working.
Using your Device
Use only original and authorized accessories.
Unauthorized accessories may affect your device
performance.
Do not expose your device to moisture or water.
Handle carefully. Do not drop!
Kindly use your device with a Nano Sim card only. Do
not try to insert sim card of any other size as this may
lead to damage to sim slot connector pins and might
render your device useless.
Battery Usage precautions
DO NOT - short circuit or try to disassemble the
battery as it may cause fire.
Always store battery in cool dry place.
Always use genuine and authorized charger to charge
the battery.
Replace worn out battery with authorized and genuine
battery.
Dispose worn out battery in an appropriate way.
Battery to be used for intended purpose only.
Information
Technical specifications
General
Supported OS WinXP (SP3 onwards)/Vista/Win7/
Win8/Win10/MAC/Linux
Input voltage
5V
Output voltage
4.35V Maximum
Maximum power
3.5W
consumption
Memory
2Gbit ROM and 2Gbit RAM
External interfaces
Micro-USB port
Nano-SIM card interface
Micro-SD card interface (up to 32GB)
Operating temp. charge
Charging: 0 ˚C~+40 ˚C
Discharge: 0 ˚C~+60 ˚C
Dimensions (L*W*H)
88.7 x 78.9 x 16.6mm
No. of device supported
31(WiFi) + 1(USB tethering)
Bands
Standards compliance
WAN: LTE (2300/1800/850MHz)
WLAN: IEEE 802.11b/g/n 2.4G only
Battery
Rated capacity
2,600mAh
Maximum charge voltage
4.35V
Power adaptor
Input power supply
AC 100~240V
Output power supply
DC 5V
Environmental
Ambient temperature
Operating: 0 ˚C~+40 ˚C
Storage: -20 ˚C~+60 ˚C
Humidity
5% to 95% (non-condensing)
SAR body value
0.843 W/kg
3Remember or write down the SSID
(Service Set Identifier) and
Password mentioned in the battery
compartment before inserting the
battery and replacing back cover.
RSN: RAMMFLC00000001
IMEI: 911504950000010
SSID: JioFi4_000000
PWD: abcd000000
MAC ID: 581D91000000
EAN: 8809423980096
System Log IN
USERNAME/PWD:
administrator
Commodity: Router JMR1140(Black)

2Open the back cover and install the
SIM and SD cards. To install the
SIM card, insert the SIM card with
the IC chip facing down. To install
the SD card, slide the SD tray
downwards (OPEN) to lift the tray,
insert the SD card with the IC chip
facing down, and slide the tray
upwards (LOCK) to secure the tray.
4The Setup is done. Now Turn ON
your device and connect up to 31
WiFi enabled devices on your
wireless network by using the SSID
and password.
To connect quickly, press WPS
button for 3 seconds and then
press the WPS button on your
wireless device to connect.
5 Welcome to your digital life.
Download Jio4GVoice on your
smart phone to enable HD Voice
Calling and Video Calling using your
JioFi.
* JioFi works with Jio SIM card only.
About your device
Charging the device
When charging the battery for the first time,
it is recommended to charge it to 100% with
adapter and cable provided in turned OFF
position.
Charging time
USB Cable ~ Approx. 6hrs 10mins
Power adapter ~ Approx. 3hrs 30mins
Battery life on LTE*
*Depends on network conditions
Standby time ~ Approx. 480hrs
Running time ~ Approx. 7-8hrs
Turning the device ON or OFF
To turn ON the device, press and hold the
Power button for 1 second.
To turn OFF the device, press and hold the
Power button for 3 seconds.
Resetting the device
Occasionally, you may need to perform a
Factory reset when you forget login username
or password. To reset, press the Power
button and the WPS button simultaneously
for 5 seconds. The four LED indicators will
blink in blue at the same time.
Indicators
*Sleep mode (Low power consumption)
Your device will enter a sleep mode after some
time (when there is no device connected).
Short press the Power button to bring it back to
active state. This time period can be altered
through WebGUI or managed devices section of
MyJio App or jio.com.
Manage your device
Using the Web Configuration utility
Change the network name (SSID), the
Security Mode and Key, configure the
sleep mode and other settings.
Connect your Computer/Smartphone to JioFi
device over USB or WiFi interface.
Enter the URL: http://jiofi.local.html in address bar
of the browser to open the web configuration
page.
Click the 'Login' button on the top right corner of
web page screen by using 'administrator' as
username and password to access the homepage
of Web Configuration utility.
Customize network, WiFi and other parameters
and access SD card over WiFi using the web
configuration utility. You can also customize some
settings by accessing the JioFi widget. Download
the MyJio App and access the above widget.
Certain end user applications like online console
gaming and online streaming like DVR need certain
ports to be opened. Kindly check for Gaming and
Apps Management Tab in Web Configuration
Utility for more details, and for further help please
contact
JioCare.
For fast support
A user cannot access the Internet
Please check if the user is connected to JioFi SSID.
Make sure your SIM card is properly inserted.
Check if your JioFi is connected to the network.
Ensure your sim card is activated and has adequate
data balance available.
Not able to change my device settings
Please connect computer/smartphone to your JioFi
device over USB/WiFi interface.
Enter http://jiofi.local.html in the browser’s URL
input field. Click the 'Login' button on the top right
corner of your web page screen. The default
username and password are 'administrator'.
Cannot establish a WiFi connection
Please make sure the WiFi is active on your JioFi.
Refresh the network list in your computer/smart-
phone and select the correct SSID. Type the correct
network key (WiFi password) when you connected to
your JioFi.
Safety
To the Owner
Always keep the device at a distance of 20cm from
medical devices like hearing aids, pacemakers as it
may interfere while the device is turned on. It is
advisable to consult your physician or the manufactur-
er of the medical device before using your device.
Avoid using device in areas with high electromagnetic
radiations.
Avoid overnight charging of the device.
Be aware of the usage limitation when using your
device at places such as aircrafts, petrol stations,
hospitals, oil warehouses or chemical factories, where
there are explosive gases or explosive products being
processed. Turn off your device if required.
Do not open and touch the inner area of your device
as it may affect your device performance.
Keep the device out of children’s reach. Your device
may cause injury if used as a toy.
Do not touch metallic parts of your device as they may
become hot when the device is working.
Using your Device
Use only original and authorized accessories.
Unauthorized accessories may affect your device
performance.
Do not expose your device to moisture or water.
Handle carefully. Do not drop!
Kindly use your device with a Nano Sim card only. Do
not try to insert sim card of any other size as this may
lead to damage to sim slot connector pins and might
render your device useless.
Battery Usage precautions
DO NOT - short circuit or try to disassemble the
battery as it may cause fire.
Always store battery in cool dry place.
Always use genuine and authorized charger to charge
the battery.
Replace worn out battery with authorized and genuine
battery.
Dispose worn out battery in an appropriate way.
Battery to be used for intended purpose only.
Information
Technical specifications
General
Supported OS WinXP (SP3 onwards)/Vista/Win7/
Win8/Win10/MAC/Linux
Input voltage
5V
Output voltage
4.35V Maximum
Maximum power
3.5W
consumption
Memory
2Gbit ROM and 2Gbit RAM
External interfaces
Micro-USB port
Nano-SIM card interface
Micro-SD card interface (up to 32GB)
Operating temp. charge
Charging: 0 ˚C~+40 ˚C
Discharge: 0 ˚C~+60 ˚C
Dimensions (L*W*H)
88.7 x 78.9 x 16.6mm
No. of device supported
31(WiFi) + 1(USB tethering)
Bands
Standards compliance
WAN: LTE (2300/1800/850MHz)
WLAN: IEEE 802.11b/g/n 2.4G only
Battery
Rated capacity
2,600mAh
Maximum charge voltage
4.35V
Power adaptor
Input power supply
AC 100~240V
Output power supply
DC 5V
Environmental
Ambient temperature
Operating: 0 ˚C~+40 ˚C
Storage: -20 ˚C~+60 ˚C
Humidity
5% to 95% (non-condensing)
SAR body value
0.843 W/kg
3Remember or write down the SSID
(Service Set Identifier) and
Password mentioned in the battery
compartment before inserting the
battery and replacing back cover.

2Open the back cover and install the
SIM and SD cards. To install the
SIM card, insert the SIM card with
the IC chip facing down. To install
the SD card, slide the SD tray
downwards (OPEN) to lift the tray,
insert the SD card with the IC chip
facing down, and slide the tray
upwards (LOCK) to secure the tray.
4The Setup is done. Now Turn ON
your device and connect up to 31
WiFi enabled devices on your
wireless network by using the SSID
and password.
To connect quickly, press WPS
button for 3 seconds and then
press the WPS button on your
wireless device to connect.
5 Welcome to your digital life.
Download Jio4GVoice on your
smart phone to enable HD Voice
Calling and Video Calling using your
JioFi.
* JioFi works with Jio SIM card only.
About your device
Charging the device
When charging the battery for the first time,
it is recommended to charge it to 100% with
adapter and cable provided in turned OFF
position.
Charging time
USB Cable ~ Approx. 6hrs 10mins
Power adapter ~ Approx. 3hrs 30mins
Battery life on LTE*
*Depends on network conditions
Standby time ~ Approx. 480hrs
Running time ~ Approx. 7-8hrs
Turning the device ON or OFF
To turn ON the device, press and hold the
Power button for 1 second.
To turn OFF the device, press and hold the
Power button for 3 seconds.
Resetting the device
Occasionally, you may need to perform a
Factory reset when you forget login username
or password. To reset, press the Power
button and the WPS button simultaneously
for 5 seconds. The four LED indicators will
blink in blue at the same time.
Indicators
*Sleep mode (Low power consumption)
Your device will enter a sleep mode after some
time (when there is no device connected).
Short press the Power button to bring it back to
active state. This time period can be altered
through WebGUI or managed devices section of
MyJio App or jio.com.
Manage your device
Using the Web Configuration utility
Change the network name (SSID), the
Security Mode and Key, configure the
sleep mode and other settings.
Connect your Computer/Smartphone to JioFi
device over USB or WiFi interface.
Enter the URL: http://jiofi.local.html in address bar
of the browser to open the web configuration
page.
Click the 'Login' button on the top right corner of
web page screen by using 'administrator' as
username and password to access the homepage
of Web Configuration utility.
Customize network, WiFi and other parameters
and access SD card over WiFi using the web
configuration utility. You can also customize some
settings by accessing the JioFi widget. Download
the MyJio App and access the above widget.
Certain end user applications like online console
gaming and online streaming like DVR need certain
ports to be opened. Kindly check for Gaming and
Apps Management Tab in Web Configuration
Utility for more details, and for further help please
contact
JioCare.
For fast support
A user cannot access the Internet
Please check if the user is connected to JioFi SSID.
Make sure your SIM card is properly inserted.
Check if your JioFi is connected to the network.
Ensure your sim card is activated and has adequate
data balance available.
Not able to change my device settings
Please connect computer/smartphone to your JioFi
device over USB/WiFi interface.
Enter http://jiofi.local.html in the browser’s URL
input field. Click the 'Login' button on the top right
corner of your web page screen. The default
username and password are 'administrator'.
Cannot establish a WiFi connection
Please make sure the WiFi is active on your JioFi.
Refresh the network list in your computer/smart-
phone and select the correct SSID. Type the correct
network key (WiFi password) when you connected to
your JioFi.
Safety
To the Owner
Always keep the device at a distance of 20cm from
medical devices like hearing aids, pacemakers as it
may interfere while the device is turned on. It is
advisable to consult your physician or the manufactur-
er of the medical device before using your device.
Avoid using device in areas with high electromagnetic
radiations.
Avoid overnight charging of the device.
Be aware of the usage limitation when using your
device at places such as aircrafts, petrol stations,
hospitals, oil warehouses or chemical factories, where
there are explosive gases or explosive products being
processed. Turn off your device if required.
Do not open and touch the inner area of your device
as it may affect your device performance.
Keep the device out of children’s reach. Your device
may cause injury if used as a toy.
Do not touch metallic parts of your device as they may
become hot when the device is working.
Using your Device
Use only original and authorized accessories.
Unauthorized accessories may affect your device
performance.
Do not expose your device to moisture or water.
Handle carefully. Do not drop!
Kindly use your device with a Nano Sim card only. Do
not try to insert sim card of any other size as this may
lead to damage to sim slot connector pins and might
render your device useless.
Battery Usage precautions
DO NOT - short circuit or try to disassemble the
battery as it may cause fire.
Always store battery in cool dry place.
Always use genuine and authorized charger to charge
the battery.
Replace worn out battery with authorized and genuine
battery.
Dispose worn out battery in an appropriate way.
Battery to be used for intended purpose only.
Information
Technical specifications
General
Supported OS WinXP (SP3 onwards)/Vista/Win7/
Win8/Win10/MAC/Linux
Input voltage
5V
Output voltage
4.35V Maximum
Maximum power
3.5W
consumption
Memory
2Gbit ROM and 2Gbit RAM
External interfaces
Micro-USB port
Nano-SIM card interface
Micro-SD card interface (up to 32GB)
Operating temp. charge
Charging: 0 ˚C~+40 ˚C
Discharge: 0 ˚C~+60 ˚C
Dimensions (L*W*H)
88.7 x 78.9 x 16.6mm
No. of device supported
31(WiFi) + 1(USB tethering)
Bands
Standards compliance
WAN: LTE (2300/1800/850MHz)
WLAN: IEEE 802.11b/g/n 2.4G only
Battery
Rated capacity
2,600mAh
Maximum charge voltage
4.35V
Power adaptor
Input power supply
AC 100~240V
Output power supply
DC 5V
Environmental
Ambient temperature
Operating: 0 ˚C~+40 ˚C
Storage: -20 ˚C~+60 ˚C
Humidity
5% to 95% (non-condensing)
SAR body value
0.843 W/kg
3Remember or write down the SSID
(Service Set Identifier) and
Password mentioned in the battery
compartment before inserting the
battery and replacing back cover.

2Open the back cover and install the
SIM and SD cards. To install the
SIM card, insert the SIM card with
the IC chip facing down. To install
the SD card, slide the SD tray
downwards (OPEN) to lift the tray,
insert the SD card with the IC chip
facing down, and slide the tray
upwards (LOCK) to secure the tray.
4The Setup is done. Now Turn ON
your device and connect up to 31
WiFi enabled devices on your
wireless network by using the SSID
and password.
To connect quickly, press WPS
button for 3 seconds and then
press the WPS button on your
wireless device to connect.
5 Welcome to your digital life.
Download Jio4GVoice on your
smart phone to enable HD Voice
Calling and Video Calling using your
JioFi.
* JioFi works with Jio SIM card only.
About your device
Charging the device
When charging the battery for the first time,
it is recommended to charge it to 100% with
adapter and cable provided in turned OFF
position.
Charging time
USB Cable ~ Approx. 6hrs 10mins
Power adapter ~ Approx. 3hrs 30mins
Battery life on LTE*
*Depends on network conditions
Standby time ~ Approx. 480hrs
Running time ~ Approx. 7-8hrs
Turning the device ON or OFF
To turn ON the device, press and hold the
Power button for 1 second.
To turn OFF the device, press and hold the
Power button for 3 seconds.
Resetting the device
Occasionally, you may need to perform a
Factory reset when you forget login username
or password. To reset, press the Power
button and the WPS button simultaneously
for 5 seconds. The four LED indicators will
blink in blue at the same time.
Indicators
*Sleep mode (Low power consumption)
Your device will enter a sleep mode after some
time (when there is no device connected).
Short press the Power button to bring it back to
active state. This time period can be altered
through WebGUI or managed devices section of
MyJio App or jio.com.
Manage your device
Using the Web Configuration utility
Change the network name (SSID), the
Security Mode and Key, configure the
sleep mode and other settings.
Connect your Computer/Smartphone to JioFi
device over USB or WiFi interface.
Enter the URL: http://jiofi.local.html in address bar
of the browser to open the web configuration
page.
Click the 'Login' button on the top right corner of
web page screen by using 'administrator' as
username and password to access the homepage
of Web Configuration utility.
Customize network, WiFi and other parameters
and access SD card over WiFi using the web
configuration utility. You can also customize some
settings by accessing the JioFi widget. Download
the MyJio App and access the above widget.
Certain end user applications like online console
gaming and online streaming like DVR need certain
ports to be opened. Kindly check for Gaming and
Apps Management Tab in Web Configuration
Utility for more details, and for further help please
contact
JioCare.
For fast support
A user cannot access the Internet
Please check if the user is connected to JioFi SSID.
Make sure your SIM card is properly inserted.
Check if your JioFi is connected to the network.
Ensure your sim card is activated and has adequate
data balance available.
Not able to change my device settings
Please connect computer/smartphone to your JioFi
device over USB/WiFi interface.
Enter http://jiofi.local.html in the browser’s URL
input field. Click the 'Login' button on the top right
corner of your web page screen. The default
username and password are 'administrator'.
Cannot establish a WiFi connection
Please make sure the WiFi is active on your JioFi.
Refresh the network list in your computer/smart-
phone and select the correct SSID. Type the correct
network key (WiFi password) when you connected to
your JioFi.
Safety
To the Owner
Always keep the device at a distance of 20cm from
medical devices like hearing aids, pacemakers as it
may interfere while the device is turned on. It is
advisable to consult your physician or the manufactur-
er of the medical device before using your device.
Avoid using device in areas with high electromagnetic
radiations.
Avoid overnight charging of the device.
Be aware of the usage limitation when using your
device at places such as aircrafts, petrol stations,
hospitals, oil warehouses or chemical factories, where
there are explosive gases or explosive products being
processed. Turn off your device if required.
Do not open and touch the inner area of your device
as it may affect your device performance.
Keep the device out of children’s reach. Your device
may cause injury if used as a toy.
Do not touch metallic parts of your device as they may
become hot when the device is working.
Using your Device
Use only original and authorized accessories.
Unauthorized accessories may affect your device
performance.
Do not expose your device to moisture or water.
Handle carefully. Do not drop!
Kindly use your device with a Nano Sim card only. Do
not try to insert sim card of any other size as this may
lead to damage to sim slot connector pins and might
render your device useless.
Battery Usage precautions
DO NOT - short circuit or try to disassemble the
battery as it may cause fire.
Always store battery in cool dry place.
Always use genuine and authorized charger to charge
the battery.
Replace worn out battery with authorized and genuine
battery.
Dispose worn out battery in an appropriate way.
Battery to be used for intended purpose only.
Information
Technical specifications
General
Supported OS WinXP (SP3 onwards)/Vista/Win7/
Win8/Win10/MAC/Linux
Input voltage
5V
Output voltage
4.35V Maximum
Maximum power
3.5W
consumption
Memory
2Gbit ROM and 2Gbit RAM
External interfaces
Micro-USB port
Nano-SIM card interface
Micro-SD card interface (up to 32GB)
Operating temp. charge
Charging: 0 ˚C~+40 ˚C
Discharge: 0 ˚C~+60 ˚C
Dimensions (L*W*H)
88.7 x 78.9 x 16.6mm
No. of device supported
31(WiFi) + 1(USB tethering)
Bands
Standards compliance
WAN: LTE (2300/1800/850MHz)
WLAN: IEEE 802.11b/g/n 2.4G only
Battery
Rated capacity
2,600mAh
Maximum charge voltage
4.35V
Power adaptor
Input power supply
AC 100~240V
Output power supply
DC 5V
Environmental
Ambient temperature
Operating: 0 ˚C~+40 ˚C
Storage: -20 ˚C~+60 ˚C
Humidity
5% to 95% (non-condensing)
SAR body value
0.843 W/kg
3Remember or write down the SSID
(Service Set Identifier) and
Password mentioned in the battery
compartment before inserting the
battery and replacing back cover.

2Open the back cover and install the
SIM and SD cards. To install the
SIM card, insert the SIM card with
the IC chip facing down. To install
the SD card, slide the SD tray
downwards (OPEN) to lift the tray,
insert the SD card with the IC chip
facing down, and slide the tray
upwards (LOCK) to secure the tray.
4The Setup is done. Now Turn ON
your device and connect up to 31
WiFi enabled devices on your
wireless network by using the SSID
and password.
To connect quickly, press WPS
button for 3 seconds and then
press the WPS button on your
wireless device to connect.
5 Welcome to your digital life.
Download Jio4GVoice on your
smart phone to enable HD Voice
Calling and Video Calling using your
JioFi.
* JioFi works with Jio SIM card only.
About your device
Charging the device
When charging the battery for the first time,
it is recommended to charge it to 100% with
adapter and cable provided in turned OFF
position.
Charging time
USB Cable ~ Approx. 6hrs 10mins
Power adapter ~ Approx. 3hrs 30mins
Battery life on LTE*
*Depends on network conditions
Standby time ~ Approx. 480hrs
Running time ~ Approx. 7-8hrs
Turning the device ON or OFF
To turn ON the device, press and hold the
Power button for 1 second.
To turn OFF the device, press and hold the
Power button for 3 seconds.
Resetting the device
Occasionally, you may need to perform a
Factory reset when you forget login username
or password. To reset, press the Power
button and the WPS button simultaneously
for 5 seconds. The four LED indicators will
blink in blue at the same time.
Indicators
*Sleep mode (Low power consumption)
Your device will enter a sleep mode after some
time (when there is no device connected).
Short press the Power button to bring it back to
active state. This time period can be altered
through WebGUI or managed devices section of
MyJio App or jio.com.
Manage your device
Using the Web Configuration utility
Change the network name (SSID), the
Security Mode and Key, configure the
sleep mode and other settings.
Connect your Computer/Smartphone to JioFi
device over USB or WiFi interface.
Enter the URL: http://jiofi.local.html in address bar
of the browser to open the web configuration
page.
Click the 'Login' button on the top right corner of
web page screen by using 'administrator' as
username and password to access the homepage
of Web Configuration utility.
Customize network, WiFi and other parameters
and access SD card over WiFi using the web
configuration utility. You can also customize some
settings by accessing the JioFi widget. Download
the MyJio App and access the above widget.
Certain end user applications like online console
gaming and online streaming like DVR need certain
ports to be opened. Kindly check for Gaming and
Apps Management Tab in Web Configuration
Utility for more details, and for further help please
contact
JioCare.
For fast support
A user cannot access the Internet
Please check if the user is connected to JioFi SSID.
Make sure your SIM card is properly inserted.
Check if your JioFi is connected to the network.
Ensure your sim card is activated and has adequate
data balance available.
Not able to change my device settings
Please connect computer/smartphone to your JioFi
device over USB/WiFi interface.
Enter http://jiofi.local.html in the browser’s URL
input field. Click the 'Login' button on the top right
corner of your web page screen. The default
username and password are 'administrator'.
Cannot establish a WiFi connection
Please make sure the WiFi is active on your JioFi.
Refresh the network list in your computer/smart-
phone and select the correct SSID. Type the correct
network key (WiFi password) when you connected to
your JioFi.
Safety
To the Owner
Always keep the device at a distance of 20cm from
medical devices like hearing aids, pacemakers as it
may interfere while the device is turned on. It is
advisable to consult your physician or the manufactur-
er of the medical device before using your device.
Avoid using device in areas with high electromagnetic
radiations.
Avoid overnight charging of the device.
Be aware of the usage limitation when using your
device at places such as aircrafts, petrol stations,
hospitals, oil warehouses or chemical factories, where
there are explosive gases or explosive products being
processed. Turn off your device if required.
Do not open and touch the inner area of your device
as it may affect your device performance.
Keep the device out of children’s reach. Your device
may cause injury if used as a toy.
Do not touch metallic parts of your device as they may
become hot when the device is working.
Using your Device
Use only original and authorized accessories.
Unauthorized accessories may affect your device
performance.
Do not expose your device to moisture or water.
Handle carefully. Do not drop!
Kindly use your device with a Nano Sim card only. Do
not try to insert sim card of any other size as this may
lead to damage to sim slot connector pins and might
render your device useless.
Battery Usage precautions
DO NOT - short circuit or try to disassemble the
battery as it may cause fire.
Always store battery in cool dry place.
Always use genuine and authorized charger to charge
the battery.
Replace worn out battery with authorized and genuine
battery.
Dispose worn out battery in an appropriate way.
Battery to be used for intended purpose only.
Information
Technical specifications
General
Supported OS WinXP (SP3 onwards)/Vista/Win7/
Win8/Win10/MAC/Linux
Input voltage
5V
Output voltage
4.35V Maximum
Maximum power
3.5W
consumption
Memory
2Gbit ROM and 2Gbit RAM
External interfaces
Micro-USB port
Nano-SIM card interface
Micro-SD card interface (up to 32GB)
Operating temp. charge
Charging: 0 ˚C~+40 ˚C
Discharge: 0 ˚C~+60 ˚C
Dimensions (L*W*H)
88.7 x 78.9 x 16.6mm
No. of device supported
31(WiFi) + 1(USB tethering)
Bands
Standards compliance
WAN: LTE (2300/1800/850MHz)
WLAN: IEEE 802.11b/g/n 2.4G only
Battery
Rated capacity
2,600mAh
Maximum charge voltage
4.35V
Power adaptor
Input power supply
AC 100~240V
Output power supply
DC 5V
Environmental
Ambient temperature
Operating: 0 ˚C~+40 ˚C
Storage: -20 ˚C~+60 ˚C
Humidity
5% to 95% (non-condensing)
SAR body value
0.843 W/kg
3Remember or write down the SSID
(Service Set Identifier) and
Password mentioned in the battery
compartment before inserting the
battery and replacing back cover.

2Open the back cover and install the
SIM and SD cards. To install the
SIM card, insert the SIM card with
the IC chip facing down. To install
the SD card, slide the SD tray
downwards (OPEN) to lift the tray,
insert the SD card with the IC chip
facing down, and slide the tray
upwards (LOCK) to secure the tray.
4The Setup is done. Now Turn ON
your device and connect up to 31
WiFi enabled devices on your
wireless network by using the SSID
and password.
To connect quickly, press WPS
button for 3 seconds and then
press the WPS button on your
wireless device to connect.
5 Welcome to your digital life.
Download Jio4GVoice on your
smart phone to enable HD Voice
Calling and Video Calling using your
JioFi.
* JioFi works with Jio SIM card only.
About your device
Charging the device
When charging the battery for the first time,
it is recommended to charge it to 100% with
adapter and cable provided in turned OFF
position.
Charging time
USB Cable ~ Approx. 6hrs 10mins
Power adapter ~ Approx. 3hrs 30mins
Battery life on LTE*
*Depends on network conditions
Standby time ~ Approx. 480hrs
Running time ~ Approx. 7-8hrs
Turning the device ON or OFF
To turn ON the device, press and hold the
Power button for 1 second.
To turn OFF the device, press and hold the
Power button for 3 seconds.
Resetting the device
Occasionally, you may need to perform a
Factory reset when you forget login username
or password. To reset, press the Power
button and the WPS button simultaneously
for 5 seconds. The four LED indicators will
blink in blue at the same time.
Indicators
*Sleep mode (Low power consumption)
Your device will enter a sleep mode after some
time (when there is no device connected).
Short press the Power button to bring it back to
active state. This time period can be altered
through WebGUI or managed devices section of
MyJio App or jio.com.
Manage your device
Using the Web Configuration utility
Change the network name (SSID), the
Security Mode and Key, configure the
sleep mode and other settings.
Connect your Computer/Smartphone to JioFi
device over USB or WiFi interface.
Enter the URL: http://jiofi.local.html in address bar
of the browser to open the web configuration
page.
Click the 'Login' button on the top right corner of
web page screen by using 'administrator' as
username and password to access the homepage
of Web Configuration utility.
Customize network, WiFi and other parameters
and access SD card over WiFi using the web
configuration utility. You can also customize some
settings by accessing the JioFi widget. Download
the MyJio App and access the above widget.
Certain end user applications like online console
gaming and online streaming like DVR need certain
ports to be opened. Kindly check for Gaming and
Apps Management Tab in Web Configuration
Utility for more details, and for further help please
contact
JioCare.
For fast support
A user cannot access the Internet
Please check if the user is connected to JioFi SSID.
Make sure your SIM card is properly inserted.
Check if your JioFi is connected to the network.
Ensure your sim card is activated and has adequate
data balance available.
Not able to change my device settings
Please connect computer/smartphone to your JioFi
device over USB/WiFi interface.
Enter http://jiofi.local.html in the browser’s URL
input field. Click the 'Login' button on the top right
corner of your web page screen. The default
username and password are 'administrator'.
Cannot establish a WiFi connection
Please make sure the WiFi is active on your JioFi.
Refresh the network list in your computer/smart-
phone and select the correct SSID. Type the correct
network key (WiFi password) when you connected to
your JioFi.
Safety
To the Owner
Always keep the device at a distance of 20cm from
medical devices like hearing aids, pacemakers as it
may interfere while the device is turned on. It is
advisable to consult your physician or the manufactur-
er of the medical device before using your device.
Avoid using device in areas with high electromagnetic
radiations.
Avoid overnight charging of the device.
Be aware of the usage limitation when using your
device at places such as aircrafts, petrol stations,
hospitals, oil warehouses or chemical factories, where
there are explosive gases or explosive products being
processed. Turn off your device if required.
Do not open and touch the inner area of your device
as it may affect your device performance.
Keep the device out of children’s reach. Your device
may cause injury if used as a toy.
Do not touch metallic parts of your device as they may
become hot when the device is working.
Using your Device
Use only original and authorized accessories.
Unauthorized accessories may affect your device
performance.
Do not expose your device to moisture or water.
Handle carefully. Do not drop!
Kindly use your device with a Nano Sim card only. Do
not try to insert sim card of any other size as this may
lead to damage to sim slot connector pins and might
render your device useless.
Battery Usage precautions
DO NOT - short circuit or try to disassemble the
battery as it may cause fire.
Always store battery in cool dry place.
Always use genuine and authorized charger to charge
the battery.
Replace worn out battery with authorized and genuine
battery.
Dispose worn out battery in an appropriate way.
Battery to be used for intended purpose only.
Information
Technical specifications
General
Supported OS WinXP (SP3 onwards)/Vista/Win7/
Win8/Win10/MAC/Linux
Input voltage
5V
Output voltage
4.35V Maximum
Maximum power
3.5W
consumption
Memory
2Gbit ROM and 2Gbit RAM
External interfaces
Micro-USB port
Nano-SIM card interface
Micro-SD card interface (up to 32GB)
Operating temp. charge
Charging: 0 ˚C~+40 ˚C
Discharge: 0 ˚C~+60 ˚C
Dimensions (L*W*H)
88.7 x 78.9 x 16.6mm
No. of device supported
31(WiFi) + 1(USB tethering)
Bands
Standards compliance
WAN: LTE (2300/1800/850MHz)
WLAN: IEEE 802.11b/g/n 2.4G only
Battery
Rated capacity
2,600mAh
Maximum charge voltage
4.35V
Power adaptor
Input power supply
AC 100~240V
Output power supply
DC 5V
Environmental
Ambient temperature
Operating: 0 ˚C~+40 ˚C
Storage: -20 ˚C~+60 ˚C
Humidity
5% to 95% (non-condensing)
SAR body value
0.843 W/kg
3Remember or write down the SSID
(Service Set Identifier) and
Password mentioned in the battery
compartment before inserting the
battery and replacing back cover.
Power save mode/Sleep mode*On
Power
On Power save mode/Sleep mode*
in no service
Network signal
strength
On Good Signal
On Medium Signal
On Weak Signal
Battery On
On
On
Battery high/AC adaptor
connected without battery inside
Battery medium
Battery low
Blink
Blink
Blink
Charging while Battery is high
Blink Fast Too low to power on
(when device is powered off)
Charging while Battery is medium
Charging while Battery is low
Blink Normal mode
Normal mode in no serviceBlink Fast
Blink Fast No service/SIM card error/
no SIM card

2Open the back cover and install the
SIM and SD cards. To install the
SIM card, insert the SIM card with
the IC chip facing down. To install
the SD card, slide the SD tray
downwards (OPEN) to lift the tray,
insert the SD card with the IC chip
facing down, and slide the tray
upwards (LOCK) to secure the tray.
4The Setup is done. Now Turn ON
your device and connect up to 31
WiFi enabled devices on your
wireless network by using the SSID
and password.
To connect quickly, press WPS
button for 3 seconds and then
press the WPS button on your
wireless device to connect.
5 Welcome to your digital life.
Download Jio4GVoice on your
smart phone to enable HD Voice
Calling and Video Calling using your
JioFi.
* JioFi works with Jio SIM card only.
About your device
Charging the device
When charging the battery for the first time,
it is recommended to charge it to 100% with
adapter and cable provided in turned OFF
position.
Charging time
USB Cable ~ Approx. 6hrs 10mins
Power adapter ~ Approx. 3hrs 30mins
Battery life on LTE*
*Depends on network conditions
Standby time ~ Approx. 480hrs
Running time ~ Approx. 7-8hrs
Turning the device ON or OFF
To turn ON the device, press and hold the
Power button for 1 second.
To turn OFF the device, press and hold the
Power button for 3 seconds.
Resetting the device
Occasionally, you may need to perform a
Factory reset when you forget login username
or password. To reset, press the Power
button and the WPS button simultaneously
for 5 seconds. The four LED indicators will
blink in blue at the same time.
Indicators
*Sleep mode (Low power consumption)
Your device will enter a sleep mode after some
time (when there is no device connected).
Short press the Power button to bring it back to
active state. This time period can be altered
through WebGUI or managed devices section of
MyJio App or jio.com.
Manage your device
Using the Web Configuration utility
Change the network name (SSID), the
Security Mode and Key, configure the
sleep mode and other settings.
Connect your Computer/Smartphone to JioFi
device over USB or WiFi interface.
Enter the URL: http://jiofi.local.html in address bar
of the browser to open the web configuration
page.
Click the 'Login' button on the top right corner of
web page screen by using 'administrator' as
username and password to access the homepage
of Web Configuration utility.
Customize network, WiFi and other parameters
and access SD card over WiFi using the web
configuration utility. You can also customize some
settings by accessing the JioFi widget. Download
the MyJio App and access the above widget.
Certain end user applications like online console
gaming and online streaming like DVR need certain
ports to be opened. Kindly check for Gaming and
Apps Management Tab in Web Configuration
Utility for more details, and for further help please
contact
JioCare.
For fast support
A user cannot access the Internet
Please check if the user is connected to JioFi SSID.
Make sure your SIM card is properly inserted.
Check if your JioFi is connected to the network.
Ensure your sim card is activated and has adequate
data balance available.
Not able to change my device settings
Please connect computer/smartphone to your JioFi
device over USB/WiFi interface.
Enter http://jiofi.local.html in the browser’s URL
input field. Click the 'Login' button on the top right
corner of your web page screen. The default
username and password are 'administrator'.
Cannot establish a WiFi connection
Please make sure the WiFi is active on your JioFi.
Refresh the network list in your computer/smart-
phone and select the correct SSID. Type the correct
network key (WiFi password) when you connected to
your JioFi.
Safety
To the Owner
Always keep the device at a distance of 20cm from
medical devices like hearing aids, pacemakers as it
may interfere while the device is turned on. It is
advisable to consult your physician or the manufactur-
er of the medical device before using your device.
Avoid using device in areas with high electromagnetic
radiations.
Avoid overnight charging of the device.
Be aware of the usage limitation when using your
device at places such as aircrafts, petrol stations,
hospitals, oil warehouses or chemical factories, where
there are explosive gases or explosive products being
processed. Turn off your device if required.
Do not open and touch the inner area of your device
as it may affect your device performance.
Keep the device out of children’s reach. Your device
may cause injury if used as a toy.
Do not touch metallic parts of your device as they may
become hot when the device is working.
Using your Device
Use only original and authorized accessories.
Unauthorized accessories may affect your device
performance.
Do not expose your device to moisture or water.
Handle carefully. Do not drop!
Kindly use your device with a Nano Sim card only. Do
not try to insert sim card of any other size as this may
lead to damage to sim slot connector pins and might
render your device useless.
Battery Usage precautions
DO NOT - short circuit or try to disassemble the
battery as it may cause fire.
Always store battery in cool dry place.
Always use genuine and authorized charger to charge
the battery.
Replace worn out battery with authorized and genuine
battery.
Dispose worn out battery in an appropriate way.
Battery to be used for intended purpose only.
Information
Technical specifications
General
Supported OS WinXP (SP3 onwards)/Vista/Win7/
Win8/Win10/MAC/Linux
Input voltage
5V
Output voltage
4.35V Maximum
Maximum power
3.5W
consumption
Memory
2Gbit ROM and 2Gbit RAM
External interfaces
Micro-USB port
Nano-SIM card interface
Micro-SD card interface (up to 32GB)
Operating temp. charge
Charging: 0 ˚C~+40 ˚C
Discharge: 0 ˚C~+60 ˚C
Dimensions (L*W*H)
88.7 x 78.9 x 16.6mm
No. of device supported
31(WiFi) + 1(USB tethering)
Bands
Standards compliance
WAN: LTE (2300/1800/850MHz)
WLAN: IEEE 802.11b/g/n 2.4G only
Battery
Rated capacity
2,600mAh
Maximum charge voltage
4.35V
Power adaptor
Input power supply
AC 100~240V
Output power supply
DC 5V
Environmental
Ambient temperature
Operating: 0 ˚C~+40 ˚C
Storage: -20 ˚C~+60 ˚C
Humidity
5% to 95% (non-condensing)
SAR body value
0.843 W/kg
3Remember or write down the SSID
(Service Set Identifier) and
Password mentioned in the battery
compartment before inserting the
battery and replacing back cover.
WiFi
All 4 LEDs
On WiFi connected
On WiFi standby
Blink Fast WPS standby
Transferring dataBlink
Firmware upgradeOn

2Open the back cover and install the
SIM and SD cards. To install the
SIM card, insert the SIM card with
the IC chip facing down. To install
the SD card, slide the SD tray
downwards (OPEN) to lift the tray,
insert the SD card with the IC chip
facing down, and slide the tray
upwards (LOCK) to secure the tray.
4The Setup is done. Now Turn ON
your device and connect up to 31
WiFi enabled devices on your
wireless network by using the SSID
and password.
To connect quickly, press WPS
button for 3 seconds and then
press the WPS button on your
wireless device to connect.
5 Welcome to your digital life.
Download Jio4GVoice on your
smart phone to enable HD Voice
Calling and Video Calling using your
JioFi.
* JioFi works with Jio SIM card only.
About your device
Charging the device
When charging the battery for the first time,
it is recommended to charge it to 100% with
adapter and cable provided in turned OFF
position.
Charging time
USB Cable ~ Approx. 6hrs 10mins
Power adapter ~ Approx. 3hrs 30mins
Battery life on LTE*
*Depends on network conditions
Standby time ~ Approx. 480hrs
Running time ~ Approx. 7-8hrs
Turning the device ON or OFF
To turn ON the device, press and hold the
Power button for 1 second.
To turn OFF the device, press and hold the
Power button for 3 seconds.
Resetting the device
Occasionally, you may need to perform a
Factory reset when you forget login username
or password. To reset, press the Power
button and the WPS button simultaneously
for 5 seconds. The four LED indicators will
blink in blue at the same time.
Indicators
*Sleep mode (Low power consumption)
Your device will enter a sleep mode after some
time (when there is no device connected).
Short press the Power button to bring it back to
active state. This time period can be altered
through WebGUI or managed devices section of
MyJio App or jio.com.
Manage your device
Using the Web Configuration utility
Change the network name (SSID), the
Security Mode and Key, configure the
sleep mode and other settings.
Connect your Computer/Smartphone to JioFi
device over USB or WiFi interface.
Enter the URL: http://jiofi.local.html in address bar
of the browser to open the web configuration
page.
Click the 'Login' button on the top right corner of
web page screen by using 'administrator' as
username and password to access the homepage
of Web Configuration utility.
Customize network, WiFi and other parameters
and access SD card over WiFi using the web
configuration utility. You can also customize some
settings by accessing the JioFi widget. Download
the MyJio App and access the above widget.
Certain end user applications like online console
gaming and online streaming like DVR need certain
ports to be opened. Kindly check for Gaming and
Apps Management Tab in Web Configuration
Utility for more details, and for further help please
contact
JioCare.
For fast support
A user cannot access the Internet
Please check if the user is connected to JioFi SSID.
Make sure your SIM card is properly inserted.
Check if your JioFi is connected to the network.
Ensure your sim card is activated and has adequate
data balance available.
Not able to change my device settings
Please connect computer/smartphone to your JioFi
device over USB/WiFi interface.
Enter http://jiofi.local.html in the browser’s URL
input field. Click the 'Login' button on the top right
corner of your web page screen. The default
username and password are 'administrator'.
Cannot establish a WiFi connection
Please make sure the WiFi is active on your JioFi.
Refresh the network list in your computer/smart-
phone and select the correct SSID. Type the correct
network key (WiFi password) when you connected to
your JioFi.
Safety
To the Owner
Always keep the device at a distance of 20cm from
medical devices like hearing aids, pacemakers as it
may interfere while the device is turned on. It is
advisable to consult your physician or the manufactur-
er of the medical device before using your device.
Avoid using device in areas with high electromagnetic
radiations.
Avoid overnight charging of the device.
Be aware of the usage limitation when using your
device at places such as aircrafts, petrol stations,
hospitals, oil warehouses or chemical factories, where
there are explosive gases or explosive products being
processed. Turn off your device if required.
Do not open and touch the inner area of your device
as it may affect your device performance.
Keep the device out of children’s reach. Your device
may cause injury if used as a toy.
Do not touch metallic parts of your device as they may
become hot when the device is working.
Using your Device
Use only original and authorized accessories.
Unauthorized accessories may affect your device
performance.
Do not expose your device to moisture or water.
Handle carefully. Do not drop!
Kindly use your device with a Nano Sim card only. Do
not try to insert sim card of any other size as this may
lead to damage to sim slot connector pins and might
render your device useless.
Battery Usage precautions
DO NOT - short circuit or try to disassemble the
battery as it may cause fire.
Always store battery in cool dry place.
Always use genuine and authorized charger to charge
the battery.
Replace worn out battery with authorized and genuine
battery.
Dispose worn out battery in an appropriate way.
Battery to be used for intended purpose only.
Information
Technical specifications
General
Supported OS WinXP (SP3 onwards)/Vista/Win7/
Win8/Win10/MAC/Linux
Input voltage
5V
Output voltage
4.35V Maximum
Maximum power
3.5W
consumption
Memory
2Gbit ROM and 2Gbit RAM
External interfaces
Micro-USB port
Nano-SIM card interface
Micro-SD card interface (up to 32GB)
Operating temp. charge
Charging: 0 ˚C~+40 ˚C
Discharge: 0 ˚C~+60 ˚C
Dimensions (L*W*H)
88.7 x 78.9 x 16.6mm
No. of device supported
31(WiFi) + 1(USB tethering)
Bands
Standards compliance
WAN: LTE (2300/1800/850MHz)
WLAN: IEEE 802.11b/g/n 2.4G only
Battery
Rated capacity
2,600mAh
Maximum charge voltage
4.35V
Power adaptor
Input power supply
AC 100~240V
Output power supply
DC 5V
Environmental
Ambient temperature
Operating: 0 ˚C~+40 ˚C
Storage: -20 ˚C~+60 ˚C
Humidity
5% to 95% (non-condensing)
SAR body value
0.843 W/kg
3Remember or write down the SSID
(Service Set Identifier) and
Password mentioned in the battery
compartment before inserting the
battery and replacing back cover.
1
2
3
4
5

2Open the back cover and install the
SIM and SD cards. To install the
SIM card, insert the SIM card with
the IC chip facing down. To install
the SD card, slide the SD tray
downwards (OPEN) to lift the tray,
insert the SD card with the IC chip
facing down, and slide the tray
upwards (LOCK) to secure the tray.
4The Setup is done. Now Turn ON
your device and connect up to 31
WiFi enabled devices on your
wireless network by using the SSID
and password.
To connect quickly, press WPS
button for 3 seconds and then
press the WPS button on your
wireless device to connect.
5 Welcome to your digital life.
Download Jio4GVoice on your
smart phone to enable HD Voice
Calling and Video Calling using your
JioFi.
* JioFi works with Jio SIM card only.
About your device
Charging the device
When charging the battery for the first time,
it is recommended to charge it to 100% with
adapter and cable provided in turned OFF
position.
Charging time
USB Cable ~ Approx. 6hrs 10mins
Power adapter ~ Approx. 3hrs 30mins
Battery life on LTE*
*Depends on network conditions
Standby time ~ Approx. 480hrs
Running time ~ Approx. 7-8hrs
Turning the device ON or OFF
To turn ON the device, press and hold the
Power button for 1 second.
To turn OFF the device, press and hold the
Power button for 3 seconds.
Resetting the device
Occasionally, you may need to perform a
Factory reset when you forget login username
or password. To reset, press the Power
button and the WPS button simultaneously
for 5 seconds. The four LED indicators will
blink in blue at the same time.
Indicators
*Sleep mode (Low power consumption)
Your device will enter a sleep mode after some
time (when there is no device connected).
Short press the Power button to bring it back to
active state. This time period can be altered
through WebGUI or managed devices section of
MyJio App or jio.com.
Manage your device
Using the Web Configuration utility
Change the network name (SSID), the
Security Mode and Key, configure the
sleep mode and other settings.
Connect your Computer/Smartphone to JioFi
device over USB or WiFi interface.
Enter the URL: http://jiofi.local.html in address bar
of the browser to open the web configuration
page.
Click the 'Login' button on the top right corner of
web page screen by using 'administrator' as
username and password to access the homepage
of Web Configuration utility.
Customize network, WiFi and other parameters
and access SD card over WiFi using the web
configuration utility. You can also customize some
settings by accessing the JioFi widget. Download
the MyJio App and access the above widget.
Certain end user applications like online console
gaming and online streaming like DVR need certain
ports to be opened. Kindly check for Gaming and
Apps Management Tab in Web Configuration
Utility for more details, and for further help please
contact
JioCare.
For fast support
A user cannot access the Internet
Please check if the user is connected to JioFi SSID.
Make sure your SIM card is properly inserted.
Check if your JioFi is connected to the network.
Ensure your sim card is activated and has adequate
data balance available.
Not able to change my device settings
Please connect computer/smartphone to your JioFi
device over USB/WiFi interface.
Enter http://jiofi.local.html in the browser’s URL
input field. Click the 'Login' button on the top right
corner of your web page screen. The default
username and password are 'administrator'.
Cannot establish a WiFi connection
Please make sure the WiFi is active on your JioFi.
Refresh the network list in your computer/smart-
phone and select the correct SSID. Type the correct
network key (WiFi password) when you connected to
your JioFi.
Safety
To the Owner
Always keep the device at a distance of 20cm from
medical devices like hearing aids, pacemakers as it
may interfere while the device is turned on. It is
advisable to consult your physician or the manufactur-
er of the medical device before using your device.
Avoid using device in areas with high electromagnetic
radiations.
Avoid overnight charging of the device.
Be aware of the usage limitation when using your
device at places such as aircrafts, petrol stations,
hospitals, oil warehouses or chemical factories, where
there are explosive gases or explosive products being
processed. Turn off your device if required.
Do not open and touch the inner area of your device
as it may affect your device performance.
Keep the device out of children’s reach. Your device
may cause injury if used as a toy.
Do not touch metallic parts of your device as they may
become hot when the device is working.
Using your Device
Use only original and authorized accessories.
Unauthorized accessories may affect your device
performance.
Do not expose your device to moisture or water.
Handle carefully. Do not drop!
Kindly use your device with a Nano Sim card only. Do
not try to insert sim card of any other size as this may
lead to damage to sim slot connector pins and might
render your device useless.
Battery Usage precautions
DO NOT - short circuit or try to disassemble the
battery as it may cause fire.
Always store battery in cool dry place.
Always use genuine and authorized charger to charge
the battery.
Replace worn out battery with authorized and genuine
battery.
Dispose worn out battery in an appropriate way.
Battery to be used for intended purpose only.
Information
Technical specifications
General
Supported OS WinXP (SP3 onwards)/Vista/Win7/
Win8/Win10/MAC/Linux
Input voltage
5V
Output voltage
4.35V Maximum
Maximum power
3.5W
consumption
Memory
2Gbit ROM and 2Gbit RAM
External interfaces
Micro-USB port
Nano-SIM card interface
Micro-SD card interface (up to 32GB)
Operating temp. charge
Charging: 0 ˚C~+40 ˚C
Discharge: 0 ˚C~+60 ˚C
Dimensions (L*W*H)
88.7 x 78.9 x 16.6mm
No. of device supported
31(WiFi) + 1(USB tethering)
Bands
Standards compliance
WAN: LTE (2300/1800/850MHz)
WLAN: IEEE 802.11b/g/n 2.4G only
Battery
Rated capacity
2,600mAh
Maximum charge voltage
4.35V
Power adaptor
Input power supply
AC 100~240V
Output power supply
DC 5V
Environmental
Ambient temperature
Operating: 0 ˚C~+40 ˚C
Storage: -20 ˚C~+60 ˚C
Humidity
5% to 95% (non-condensing)
SAR body value
0.843 W/kg
3Remember or write down the SSID
(Service Set Identifier) and
Password mentioned in the battery
compartment before inserting the
battery and replacing back cover.

2Open the back cover and install the
SIM and SD cards. To install the
SIM card, insert the SIM card with
the IC chip facing down. To install
the SD card, slide the SD tray
downwards (OPEN) to lift the tray,
insert the SD card with the IC chip
facing down, and slide the tray
upwards (LOCK) to secure the tray.
4The Setup is done. Now Turn ON
your device and connect up to 31
WiFi enabled devices on your
wireless network by using the SSID
and password.
To connect quickly, press WPS
button for 3 seconds and then
press the WPS button on your
wireless device to connect.
5 Welcome to your digital life.
Download Jio4GVoice on your
smart phone to enable HD Voice
Calling and Video Calling using your
JioFi.
* JioFi works with Jio SIM card only.
About your device
Charging the device
When charging the battery for the first time,
it is recommended to charge it to 100% with
adapter and cable provided in turned OFF
position.
Charging time
USB Cable ~ Approx. 6hrs 10mins
Power adapter ~ Approx. 3hrs 30mins
Battery life on LTE*
*Depends on network conditions
Standby time ~ Approx. 480hrs
Running time ~ Approx. 7-8hrs
Turning the device ON or OFF
To turn ON the device, press and hold the
Power button for 1 second.
To turn OFF the device, press and hold the
Power button for 3 seconds.
Resetting the device
Occasionally, you may need to perform a
Factory reset when you forget login username
or password. To reset, press the Power
button and the WPS button simultaneously
for 5 seconds. The four LED indicators will
blink in blue at the same time.
Indicators
*Sleep mode (Low power consumption)
Your device will enter a sleep mode after some
time (when there is no device connected).
Short press the Power button to bring it back to
active state. This time period can be altered
through WebGUI or managed devices section of
MyJio App or jio.com.
Manage your device
Using the Web Configuration utility
Change the network name (SSID), the
Security Mode and Key, configure the
sleep mode and other settings.
Connect your Computer/Smartphone to JioFi
device over USB or WiFi interface.
Enter the URL: http://jiofi.local.html in address bar
of the browser to open the web configuration
page.
Click the 'Login' button on the top right corner of
web page screen by using 'administrator' as
username and password to access the homepage
of Web Configuration utility.
Customize network, WiFi and other parameters
and access SD card over WiFi using the web
configuration utility. You can also customize some
settings by accessing the JioFi widget. Download
the MyJio App and access the above widget.
Certain end user applications like online console
gaming and online streaming like DVR need certain
ports to be opened. Kindly check for Gaming and
Apps Management Tab in Web Configuration
Utility for more details, and for further help please
contact
JioCare.
For fast support
A user cannot access the Internet
Please check if the user is connected to JioFi SSID.
Make sure your SIM card is properly inserted.
Check if your JioFi is connected to the network.
Ensure your sim card is activated and has adequate
data balance available.
Not able to change my device settings
Please connect computer/smartphone to your JioFi
device over USB/WiFi interface.
Enter http://jiofi.local.html in the browser’s URL
input field. Click the 'Login' button on the top right
corner of your web page screen. The default
username and password are 'administrator'.
Cannot establish a WiFi connection
Please make sure the WiFi is active on your JioFi.
Refresh the network list in your computer/smart-
phone and select the correct SSID. Type the correct
network key (WiFi password) when you connected to
your JioFi.
Safety
To the Owner
Always keep the device at a distance of 20cm from
medical devices like hearing aids, pacemakers as it
may interfere while the device is turned on. It is
advisable to consult your physician or the manufactur-
er of the medical device before using your device.
Avoid using device in areas with high electromagnetic
radiations.
Avoid overnight charging of the device.
Be aware of the usage limitation when using your
device at places such as aircrafts, petrol stations,
hospitals, oil warehouses or chemical factories, where
there are explosive gases or explosive products being
processed. Turn off your device if required.
Do not open and touch the inner area of your device
as it may affect your device performance.
Keep the device out of children’s reach. Your device
may cause injury if used as a toy.
Do not touch metallic parts of your device as they may
become hot when the device is working.
Using your Device
Use only original and authorized accessories.
Unauthorized accessories may affect your device
performance.
Do not expose your device to moisture or water.
Handle carefully. Do not drop!
Kindly use your device with a Nano Sim card only. Do
not try to insert sim card of any other size as this may
lead to damage to sim slot connector pins and might
render your device useless.
Battery Usage precautions
DO NOT - short circuit or try to disassemble the
battery as it may cause fire.
Always store battery in cool dry place.
Always use genuine and authorized charger to charge
the battery.
Replace worn out battery with authorized and genuine
battery.
Dispose worn out battery in an appropriate way.
Battery to be used for intended purpose only.
Information
Technical specifications
General
Supported OS WinXP (SP3 onwards)/Vista/Win7/
Win8/Win10/MAC/Linux
Input voltage
5V
Output voltage
4.35V Maximum
Maximum power
3.5W
consumption
Memory
2Gbit ROM and 2Gbit RAM
External interfaces
Micro-USB port
Nano-SIM card interface
Micro-SD card interface (up to 32GB)
Operating temp. charge
Charging: 0 ˚C~+40 ˚C
Discharge: 0 ˚C~+60 ˚C
Dimensions (L*W*H)
88.7 x 78.9 x 16.6mm
No. of device supported
31(WiFi) + 1(USB tethering)
Bands
Standards compliance
WAN: LTE (2300/1800/850MHz)
WLAN: IEEE 802.11b/g/n 2.4G only
Battery
Rated capacity
2,600mAh
Maximum charge voltage
4.35V
Power adaptor
Input power supply
AC 100~240V
Output power supply
DC 5V
Environmental
Ambient temperature
Operating: 0 ˚C~+40 ˚C
Storage: -20 ˚C~+60 ˚C
Humidity
5% to 95% (non-condensing)
SAR body value
0.843 W/kg
3Remember or write down the SSID
(Service Set Identifier) and
Password mentioned in the battery
compartment before inserting the
battery and replacing back cover.

2Open the back cover and install the
SIM and SD cards. To install the
SIM card, insert the SIM card with
the IC chip facing down. To install
the SD card, slide the SD tray
downwards (OPEN) to lift the tray,
insert the SD card with the IC chip
facing down, and slide the tray
upwards (LOCK) to secure the tray.
4The Setup is done. Now Turn ON
your device and connect up to 31
WiFi enabled devices on your
wireless network by using the SSID
and password.
To connect quickly, press WPS
button for 3 seconds and then
press the WPS button on your
wireless device to connect.
5 Welcome to your digital life.
Download Jio4GVoice on your
smart phone to enable HD Voice
Calling and Video Calling using your
JioFi.
* JioFi works with Jio SIM card only.
About your device
Charging the device
When charging the battery for the first time,
it is recommended to charge it to 100% with
adapter and cable provided in turned OFF
position.
Charging time
USB Cable ~ Approx. 6hrs 10mins
Power adapter ~ Approx. 3hrs 30mins
Battery life on LTE*
*Depends on network conditions
Standby time ~ Approx. 480hrs
Running time ~ Approx. 7-8hrs
Turning the device ON or OFF
To turn ON the device, press and hold the
Power button for 1 second.
To turn OFF the device, press and hold the
Power button for 3 seconds.
Resetting the device
Occasionally, you may need to perform a
Factory reset when you forget login username
or password. To reset, press the Power
button and the WPS button simultaneously
for 5 seconds. The four LED indicators will
blink in blue at the same time.
Indicators
*Sleep mode (Low power consumption)
Your device will enter a sleep mode after some
time (when there is no device connected).
Short press the Power button to bring it back to
active state. This time period can be altered
through WebGUI or managed devices section of
MyJio App or jio.com.
Manage your device
Using the Web Configuration utility
Change the network name (SSID), the
Security Mode and Key, configure the
sleep mode and other settings.
Connect your Computer/Smartphone to JioFi
device over USB or WiFi interface.
Enter the URL: http://jiofi.local.html in address bar
of the browser to open the web configuration
page.
Click the 'Login' button on the top right corner of
web page screen by using 'administrator' as
username and password to access the homepage
of Web Configuration utility.
Customize network, WiFi and other parameters
and access SD card over WiFi using the web
configuration utility. You can also customize some
settings by accessing the JioFi widget. Download
the MyJio App and access the above widget.
Certain end user applications like online console
gaming and online streaming like DVR need certain
ports to be opened. Kindly check for Gaming and
Apps Management Tab in Web Configuration
Utility for more details, and for further help please
contact
JioCare.
For fast support
A user cannot access the Internet
Please check if the user is connected to JioFi SSID.
Make sure your SIM card is properly inserted.
Check if your JioFi is connected to the network.
Ensure your sim card is activated and has adequate
data balance available.
Not able to change my device settings
Please connect computer/smartphone to your JioFi
device over USB/WiFi interface.
Enter http://jiofi.local.html in the browser’s URL
input field. Click the 'Login' button on the top right
corner of your web page screen. The default
username and password are 'administrator'.
Cannot establish a WiFi connection
Please make sure the WiFi is active on your JioFi.
Refresh the network list in your computer/smart-
phone and select the correct SSID. Type the correct
network key (WiFi password) when you connected to
your JioFi.
Safety
To the Owner
Always keep the device at a distance of 20cm from
medical devices like hearing aids, pacemakers as it
may interfere while the device is turned on. It is
advisable to consult your physician or the manufactur-
er of the medical device before using your device.
Avoid using device in areas with high electromagnetic
radiations.
Avoid overnight charging of the device.
Be aware of the usage limitation when using your
device at places such as aircrafts, petrol stations,
hospitals, oil warehouses or chemical factories, where
there are explosive gases or explosive products being
processed. Turn off your device if required.
Do not open and touch the inner area of your device
as it may affect your device performance.
Keep the device out of children’s reach. Your device
may cause injury if used as a toy.
Do not touch metallic parts of your device as they may
become hot when the device is working.
Using your Device
Use only original and authorized accessories.
Unauthorized accessories may affect your device
performance.
Do not expose your device to moisture or water.
Handle carefully. Do not drop!
Kindly use your device with a Nano Sim card only. Do
not try to insert sim card of any other size as this may
lead to damage to sim slot connector pins and might
render your device useless.
Battery Usage precautions
DO NOT - short circuit or try to disassemble the
battery as it may cause fire.
Always store battery in cool dry place.
Always use genuine and authorized charger to charge
the battery.
Replace worn out battery with authorized and genuine
battery.
Dispose worn out battery in an appropriate way.
Battery to be used for intended purpose only.
Information
Technical specifications
General
Supported OS WinXP (SP3 onwards)/Vista/Win7/
Win8/Win10/MAC/Linux
Input voltage
5V
Output voltage
4.35V Maximum
Maximum power
3.5W
consumption
Memory
2Gbit ROM and 2Gbit RAM
External interfaces
Micro-USB port
Nano-SIM card interface
Micro-SD card interface (up to 32GB)
Operating temp. charge
Charging: 0 ˚C~+40 ˚C
Discharge: 0 ˚C~+60 ˚C
Dimensions (L*W*H)
88.7 x 78.9 x 16.6mm
No. of device supported
31(WiFi) + 1(USB tethering)
Bands
Standards compliance
WAN: LTE (2300/1800/850MHz)
WLAN: IEEE 802.11b/g/n 2.4G only
Battery
Rated capacity
2,600mAh
Maximum charge voltage
4.35V
Power adaptor
Input power supply
AC 100~240V
Output power supply
DC 5V
Environmental
Ambient temperature
Operating: 0 ˚C~+40 ˚C
Storage: -20 ˚C~+60 ˚C
Humidity
5% to 95% (non-condensing)
SAR body value
0.843 W/kg
3Remember or write down the SSID
(Service Set Identifier) and
Password mentioned in the battery
compartment before inserting the
battery and replacing back cover.
RoHS and Disposal
This product is RoHS compliant.
Do not dispose with household waste.

2Open the back cover and install the
SIM and SD cards. To install the
SIM card, insert the SIM card with
the IC chip facing down. To install
the SD card, slide the SD tray
downwards (OPEN) to lift the tray,
insert the SD card with the IC chip
facing down, and slide the tray
upwards (LOCK) to secure the tray.
4The Setup is done. Now Turn ON
your device and connect up to 31
WiFi enabled devices on your
wireless network by using the SSID
and password.
To connect quickly, press WPS
button for 3 seconds and then
press the WPS button on your
wireless device to connect.
5 Welcome to your digital life.
Download Jio4GVoice on your
smart phone to enable HD Voice
Calling and Video Calling using your
JioFi.
* JioFi works with Jio SIM card only.
About your device
Charging the device
When charging the battery for the first time,
it is recommended to charge it to 100% with
adapter and cable provided in turned OFF
position.
Charging time
USB Cable ~ Approx. 6hrs 10mins
Power adapter ~ Approx. 3hrs 30mins
Battery life on LTE*
*Depends on network conditions
Standby time ~ Approx. 480hrs
Running time ~ Approx. 7-8hrs
Turning the device ON or OFF
To turn ON the device, press and hold the
Power button for 1 second.
To turn OFF the device, press and hold the
Power button for 3 seconds.
Resetting the device
Occasionally, you may need to perform a
Factory reset when you forget login username
or password. To reset, press the Power
button and the WPS button simultaneously
for 5 seconds. The four LED indicators will
blink in blue at the same time.
Indicators
*Sleep mode (Low power consumption)
Your device will enter a sleep mode after some
time (when there is no device connected).
Short press the Power button to bring it back to
active state. This time period can be altered
through WebGUI or managed devices section of
MyJio App or jio.com.
Manage your device
Using the Web Configuration utility
Change the network name (SSID), the
Security Mode and Key, configure the
sleep mode and other settings.
Connect your Computer/Smartphone to JioFi
device over USB or WiFi interface.
Enter the URL: http://jiofi.local.html in address bar
of the browser to open the web configuration
page.
Click the 'Login' button on the top right corner of
web page screen by using 'administrator' as
username and password to access the homepage
of Web Configuration utility.
Customize network, WiFi and other parameters
and access SD card over WiFi using the web
configuration utility. You can also customize some
settings by accessing the JioFi widget. Download
the MyJio App and access the above widget.
Certain end user applications like online console
gaming and online streaming like DVR need certain
ports to be opened. Kindly check for Gaming and
Apps Management Tab in Web Configuration
Utility for more details, and for further help please
contact
JioCare.
For fast support
A user cannot access the Internet
Please check if the user is connected to JioFi SSID.
Make sure your SIM card is properly inserted.
Check if your JioFi is connected to the network.
Ensure your sim card is activated and has adequate
data balance available.
Not able to change my device settings
Please connect computer/smartphone to your JioFi
device over USB/WiFi interface.
Enter http://jiofi.local.html in the browser’s URL
input field. Click the 'Login' button on the top right
corner of your web page screen. The default
username and password are 'administrator'.
Cannot establish a WiFi connection
Please make sure the WiFi is active on your JioFi.
Refresh the network list in your computer/smart-
phone and select the correct SSID. Type the correct
network key (WiFi password) when you connected to
your JioFi.
Safety
To the Owner
Always keep the device at a distance of 20cm from
medical devices like hearing aids, pacemakers as it
may interfere while the device is turned on. It is
advisable to consult your physician or the manufactur-
er of the medical device before using your device.
Avoid using device in areas with high electromagnetic
radiations.
Avoid overnight charging of the device.
Be aware of the usage limitation when using your
device at places such as aircrafts, petrol stations,
hospitals, oil warehouses or chemical factories, where
there are explosive gases or explosive products being
processed. Turn off your device if required.
Do not open and touch the inner area of your device
as it may affect your device performance.
Keep the device out of children’s reach. Your device
may cause injury if used as a toy.
Do not touch metallic parts of your device as they may
become hot when the device is working.
Using your Device
Use only original and authorized accessories.
Unauthorized accessories may affect your device
performance.
Do not expose your device to moisture or water.
Handle carefully. Do not drop!
Kindly use your device with a Nano Sim card only. Do
not try to insert sim card of any other size as this may
lead to damage to sim slot connector pins and might
render your device useless.
Battery Usage precautions
DO NOT - short circuit or try to disassemble the
battery as it may cause fire.
Always store battery in cool dry place.
Always use genuine and authorized charger to charge
the battery.
Replace worn out battery with authorized and genuine
battery.
Dispose worn out battery in an appropriate way.
Battery to be used for intended purpose only.
Information
Technical specifications
General
Supported OS WinXP (SP3 onwards)/Vista/Win7/
Win8/Win10/MAC/Linux
Input voltage
5V
Output voltage
4.35V Maximum
Maximum power
3.5W
consumption
Memory
2Gbit ROM and 2Gbit RAM
External interfaces
Micro-USB port
Nano-SIM card interface
Micro-SD card interface (up to 32GB)
Operating temp. charge
Charging: 0 ˚C~+40 ˚C
Discharge: 0 ˚C~+60 ˚C
Dimensions (L*W*H)
88.7 x 78.9 x 16.6mm
No. of device supported
31(WiFi) + 1(USB tethering)
Bands
Standards compliance
WAN: LTE (2300/1800/850MHz)
WLAN: IEEE 802.11b/g/n 2.4G only
Battery
Rated capacity
2,600mAh
Maximum charge voltage
4.35V
Power adaptor
Input power supply
AC 100~240V
Output power supply
DC 5V
Environmental
Ambient temperature
Operating: 0 ˚C~+40 ˚C
Storage: -20 ˚C~+60 ˚C
Humidity
5% to 95% (non-condensing)
SAR body value
0.843 W/kg
3Remember or write down the SSID
(Service Set Identifier) and
Password mentioned in the battery
compartment before inserting the
battery and replacing back cover.

2Open the back cover and install the
SIM and SD cards. To install the
SIM card, insert the SIM card with
the IC chip facing down. To install
the SD card, slide the SD tray
downwards (OPEN) to lift the tray,
insert the SD card with the IC chip
facing down, and slide the tray
upwards (LOCK) to secure the tray.
4The Setup is done. Now Turn ON
your device and connect up to 31
WiFi enabled devices on your
wireless network by using the SSID
and password.
To connect quickly, press WPS
button for 3 seconds and then
press the WPS button on your
wireless device to connect.
5 Welcome to your digital life.
Download Jio4GVoice on your
smart phone to enable HD Voice
Calling and Video Calling using your
JioFi.
* JioFi works with Jio SIM card only.
About your device
Charging the device
When charging the battery for the first time,
it is recommended to charge it to 100% with
adapter and cable provided in turned OFF
position.
Charging time
USB Cable ~ Approx. 6hrs 10mins
Power adapter ~ Approx. 3hrs 30mins
Battery life on LTE*
*Depends on network conditions
Standby time ~ Approx. 480hrs
Running time ~ Approx. 7-8hrs
Turning the device ON or OFF
To turn ON the device, press and hold the
Power button for 1 second.
To turn OFF the device, press and hold the
Power button for 3 seconds.
Resetting the device
Occasionally, you may need to perform a
Factory reset when you forget login username
or password. To reset, press the Power
button and the WPS button simultaneously
for 5 seconds. The four LED indicators will
blink in blue at the same time.
Indicators
*Sleep mode (Low power consumption)
Your device will enter a sleep mode after some
time (when there is no device connected).
Short press the Power button to bring it back to
active state. This time period can be altered
through WebGUI or managed devices section of
MyJio App or jio.com.
Manage your device
Using the Web Configuration utility
Change the network name (SSID), the
Security Mode and Key, configure the
sleep mode and other settings.
Connect your Computer/Smartphone to JioFi
device over USB or WiFi interface.
Enter the URL: http://jiofi.local.html in address bar
of the browser to open the web configuration
page.
Click the 'Login' button on the top right corner of
web page screen by using 'administrator' as
username and password to access the homepage
of Web Configuration utility.
Customize network, WiFi and other parameters
and access SD card over WiFi using the web
configuration utility. You can also customize some
settings by accessing the JioFi widget. Download
the MyJio App and access the above widget.
Certain end user applications like online console
gaming and online streaming like DVR need certain
ports to be opened. Kindly check for Gaming and
Apps Management Tab in Web Configuration
Utility for more details, and for further help please
contact
JioCare.
For fast support
A user cannot access the Internet
Please check if the user is connected to JioFi SSID.
Make sure your SIM card is properly inserted.
Check if your JioFi is connected to the network.
Ensure your sim card is activated and has adequate
data balance available.
Not able to change my device settings
Please connect computer/smartphone to your JioFi
device over USB/WiFi interface.
Enter http://jiofi.local.html in the browser’s URL
input field. Click the 'Login' button on the top right
corner of your web page screen. The default
username and password are 'administrator'.
Cannot establish a WiFi connection
Please make sure the WiFi is active on your JioFi.
Refresh the network list in your computer/smart-
phone and select the correct SSID. Type the correct
network key (WiFi password) when you connected to
your JioFi.
Safety
To the Owner
Always keep the device at a distance of 20cm from
medical devices like hearing aids, pacemakers as it
may interfere while the device is turned on. It is
advisable to consult your physician or the manufactur-
er of the medical device before using your device.
Avoid using device in areas with high electromagnetic
radiations.
Avoid overnight charging of the device.
Be aware of the usage limitation when using your
device at places such as aircrafts, petrol stations,
hospitals, oil warehouses or chemical factories, where
there are explosive gases or explosive products being
processed. Turn off your device if required.
Do not open and touch the inner area of your device
as it may affect your device performance.
Keep the device out of children’s reach. Your device
may cause injury if used as a toy.
Do not touch metallic parts of your device as they may
become hot when the device is working.
Using your Device
Use only original and authorized accessories.
Unauthorized accessories may affect your device
performance.
Do not expose your device to moisture or water.
Handle carefully. Do not drop!
Kindly use your device with a Nano Sim card only. Do
not try to insert sim card of any other size as this may
lead to damage to sim slot connector pins and might
render your device useless.
Battery Usage precautions
DO NOT - short circuit or try to disassemble the
battery as it may cause fire.
Always store battery in cool dry place.
Always use genuine and authorized charger to charge
the battery.
Replace worn out battery with authorized and genuine
battery.
Dispose worn out battery in an appropriate way.
Battery to be used for intended purpose only.
Information
Technical specifications
General
Supported OS WinXP (SP3 onwards)/Vista/Win7/
Win8/Win10/MAC/Linux
Input voltage
5V
Output voltage
4.35V Maximum
Maximum power
3.5W
consumption
Memory
2Gbit ROM and 2Gbit RAM
External interfaces
Micro-USB port
Nano-SIM card interface
Micro-SD card interface (up to 32GB)
Operating temp. charge
Charging: 0 ˚C~+40 ˚C
Discharge: 0 ˚C~+60 ˚C
Dimensions (L*W*H)
88.7 x 78.9 x 16.6mm
No. of device supported
31(WiFi) + 1(USB tethering)
Bands
Standards compliance
WAN: LTE (2300/1800/850MHz)
WLAN: IEEE 802.11b/g/n 2.4G only
Battery
Rated capacity
2,600mAh
Maximum charge voltage
4.35V
Power adaptor
Input power supply
AC 100~240V
Output power supply
DC 5V
Environmental
Ambient temperature
Operating: 0 ˚C~+40 ˚C
Storage: -20 ˚C~+60 ˚C
Humidity
5% to 95% (non-condensing)
SAR body value
0.843 W/kg
3Remember or write down the SSID
(Service Set Identifier) and
Password mentioned in the battery
compartment before inserting the
battery and replacing back cover.
With love, from Jio
Reach us
If you have further question or require personal
assistance, please contact JioCare by calling or
sending on email.
We wish you a beautiful experience with
Jio.
Phone: 198 from your Jio number or
1800-88-99999 from any network
(24 Hrs.)
Email: [email protected]
Visit www.jio.com