John Lewis ABACUS 816 / 70202 User manual

ABACUS Monitor stand hutch
Stock number: 816 / 70202
H14.5 W75 D25 cm
This is compatible with:
ABACUS Filing desk LH, RH
Stock number: 816 / 22370
ABACUS small desk
Stock number: 816 / 22304
ABACUS corner desk
Stock number: 816 / 22373

1
Thank you for purchasing the ABACUS Monitor stand hutch. Please read the instructions and warnings
carefully before use, to ensure safe and satisfactory operation of this product.
At John Lewis, we are committed to making great products possible.
From our in-house Design Team, to our Buyers, we work together to bring great design to life.
Our expert Product Technologists work collaboratively with our buyers and suppliers to assure the legality,
safety and quality of the product we sell.
We are all committed to designing and developing products to the highest industry standards.
We hope you are happy with your product and welcome any feedback or comments you may have.
The John Lewis Team
Tools required
Time to assemble
30 minutes
People to assemble

2
Important safety information
Warnings
The product should only be used on firm, level ground.
Keep small parts out of reach of children .
Ensure the product is fully assembled as illustrated before use.
Do's
Check the pack and make sure you have all the parts listed.
Check all screws or bolts are tightened and inspect regularly.
Make sure the legs remain in contact with the ground at all times.
Dont's
Do not over tighten screws or bolts.
Do not stand on the product.
Do not use power tools to construct as overtightening and panel failure may occur.

3
Your Monitor stand hutch
2
Ref Description Dimension (mm) Qty
Top 752 x 250 x 17 1
Base 752 x 250 x 17 1
Vertical division 55 x 249 x 17 3
Leg 55 x 249 x 17 2
1
Internal dimension
Stock number: 816 / 70202
Monitor stand hutch: H14.5 W75 D25
3
4
1
2
3
4
3
3
4

4
Ref Description Dimension Qty
Dowel 8,0x30 16
Connecting bolt 10
Camlock 10
Screw 7,0x50 3
Screw 3,0x20 4
Fixtures and fittings
supplied (actual size)
Ref Description Dimension Qty
Cover cap 10
Connecting plate 2
Allen key 1
Fixtures and fittings
A
Fixtures and fittings
supplied (not actual size)
A
B
C
D
0 10 20 30 40 50 60 70 80
mm
E
F
H
G

5
ABACUS Monitor stand hutch
70202
OPTION A
(Follow the details in step 6a)
OPTION B
(Follow the details in step 6b)
480 mm
520 mm

6
Product assembly
ABACUS Monitor stand hutch
70202
Step 1
Parts, fittings and tools
Step 2
Parts, fittings and tools
A 3
B 1
A
A
A
A A
1
B
B
B
3
3x
B
B
B
B

7
ABACUS Monitor stand hutch
70202
Step 3
Parts, fittings and tools
Step 4
Parts, fittings and tools
D H
C 1 3
1. 2. 3.
1
3
3
3
C
C
C
C C
C
D
3
3
3
2
D
D
2
D
H

8
ABACUS Monitor stand hutch
70202
Step 5
Parts, fittings and tools
A 4
4
A
A
2x

9
ABACUS Monitor stand hutch
70202
Step 6a
Parts, fittings and tools
Step 6b
Parts, fittings and tools
B
B
2
B
B
B B
B
2
B
B
B
B
B
480 mm
520 mm

10
ABACUS Monitor stand hutch
70202
Step 7a
Parts, fittings and tools
Step 7b
Parts, fittings and tools
C
C
2
1. 2. 3.
C
C C
C
2
4
4
4
4
C
C C
C
4
4
1. 2. 3.
480 mm
520 mm

11
ABACUS Monitor stand hutch
70202
Step 8
Parts, fittings and tools
Step 9
Parts, fittings and tools
E
4 4
3
3
3
E
E E
E
E
E E
E
E
E

12
ABACUS Monitor stand hutch
70202
Step 10
Parts, fittings and tools
Step 11
Parts, fittings and tools
F G
F
F
G
G G
G
F
G

13
ABACUS Monitor stand hutch
70202
ABACUS Filing desk LH, RH
Stock number: 816 / 22370
ABACUS small desk
Stock number: 816 / 22304
ABACUS corner desk
Stock number: 816 / 22373

Care guide
Care and maintenance
Wood furniture
Wood displays different grain patterns depending on which way they are cut - for example, the 'medullary
ray' which can appear on oak furniture is a mark of good quality timber - these are just characteristics of the
natural beauty of the wood. Some furniture is also deliberately aged and rustic.
Wood veneers also allow a distinctive pattern to be created on some surfaces, such as tabletops and drawer
fronts by the way slivers are arranged.
AII timber and veneer surfaces will change colour and mellow over time. New furniture will initially vary in
shade from items that have been previously purchased.
How to care for your wood furniture
Furniture with a hard lacquer, wax polish or painted surface should be dusted with a dry cloth.
Waxed furniture will need to be given a coat of beeswax a couple of times a year to help maintain its lustre.
Spray polishes are best avoided as they contain silicones which may spoil the furniture's surface when building
up over time.
Make sure all surfaces are protected from heat and liquids by mats and coasters. Wipe up spills immediately
and ensure that a mat or pad is placed under paper if you are writing.
Our furniture will endure most temperatures in the home, but it is best to avoid placing furniture next to
heat sources such as radiators or fires. Be particularly careful with solid wood as the lack of humidity caused
by home heating can cause damage such as warping.
Safety instructions
Never drag furniture when moving it, always lift it.
Periodically check all fixings to ensure none have come loose and retighten when necessary.
Please take care when handling or moving the furniture as careless handling may cause damage or injury.
Furniture can be dangerous if incorrectly installed. Assembly should be carried out by a competent person.
No liability will be accepted for damage or injury caused by incorrectly installed or assembled furniture.
Your feedback is very important to us and we would love to hear your comments on your new furniture.
Please visit our website to leave a review. Thank you.
Retain these instructions for future reference.
John Lewis Partnership
171 Victoria Street
London SW1E SNN
johnlewis.com