Kärcher G 2600 FH User manual

8.751-847.0 02/12A
G 2600 FH
G 2800 FH
®
English 2
Español 15
Français 28

2English
Model Overview 3
Important Safety Instructions 4
Assembly Instructions 5
Operating Instructions 7
Using the Accessories 9
Working With Detergents 9
Taking a Break 10
Shutting Down & Clean-Up 10
Winterizing and Long-Term Storage 11
Maintenance Instructions 11
Cleaning Tips 11
Troubleshooting 13
DANGER
Indicates “an imminently hazardous situation
which, if not avoided, will result in death or seri-
ous injury.”
WARNING
Indicates “a potentially hazardous situation which,
if not avoided, could result in death or injury.”
CAUTION
Indicates “a potentially hazardous situation which, if
not avoided, may result in minor or moderate injury
or in property damage incidents.”
The owner and/or user must have an understand-
ing of the manufacturer’s operating instructions
and warnings before using this pressure washer.
Warning information should be emphasized and
understood. If the operator is not fluent in English,
the manufacturer’s instructions and warnings shall
be read to and discussed with the operator in the
operator’s native language by the purchaser/owner,
making sure that the operator comprehends its con-
tents. Owner and/or user must study and maintain
for future reference the manufacturer’s instructions.
Call: 1-800-537-4129 for help or visit our
website:
www.karcherresidential.com
Please take a moment to register your pressure
washer online at:
www.karcher-register.com
Call: 01-800-024-13-13 for help or visit our
website: www.karcher.com.mx
Specifications Owner/User Responsibility
Kärcher Customer Support USA/
Canada
Kärcher Customer Support
México
Safety Alert Symbols
G 2600 FH
Operating Pressure 2600 PSI
Water Volume 2.5 GPM
Detergent Suction .15 - .20 GPM
Engine Honda GCV 160
Part No. 1.107-187.0
Serial No.
G 2800 FH
Operating Pressure 2800 PSI
Water Volume 2.5 GPM
Detergent Suction .15 - .20 GPM
Engine Honda GCV 160
Part No. 1.107-188.0
Serial No.
HIGH PRESSURE WASHER OPERATOR MANUAL

English 3
1. Handle
2. Trigger Gun
3. Trigger Gun Safety Lock
4. High Pressure Hose
5. Gas Tank
6. Spray Wand
7. Nozzle Holder
8. Water Inlet With Garden Hose Connector
9. Quick Connect High Pressure Outlet
10. Detergent suction tube with filter
11. Dipstick
12. Quick Connect Nozzles
For Engine Details See Engine Manual
MODEL OVERVIEW
1
2
3
10
5
6
12
7
11
9
8
4

4English
■
Read the operating instructions of the engine
manufacturer before start-up and follow the
safety instructions carefully.
WARNING
When using this product, basic precautions should
always be followed, including the following:
■ Read all instructions before using product.
■ To reduce the risk of injury, close supervision
is necessary when a product is used near
children.
■ Know how to stop the product and bleed pres-
sures quickly. Be thoroughly familiar with the
controls.
■
Stay alert – watch what you are doing.
■ Do not operate when fatigued or under the
influence of alcohol or drugs.
■ Keep operating area clear of all persons.
■ Do not overreach or stand on unstable sup-
port. Keep good footing and balance at all
times.
■ Wear safety goggles and ear protection.
■ Follow the maintenance instructions specified
in the manual.
■ To avoid risks, all repairs and replacement
of spare parts should only be carried out by
trained personnel.
WARNING
Risk of Injection or Injury – Do Not Direct
Discharge Stream At Persons.
■
High pressure jets can be dangerous if mis-
used.The jet must not be directed at persons,
animals, electrical devices, or the unit itself.
DANGER
Do not spray electrical connections, electrical
outlets or fixtures.
WARNING
Risk Of Explosion – Do not spray flammable
liquids. Operate only where open flame or
torch is permitted.
IMPORTANT SAFETY INSTRUCTIONS
■Do not use acids, solvents, or any flammable
or alkaline material in this product. These
products can cause physical injuries to the
operator and irreversible damage to the ma-
chine.
WARNING
Gun Kicks Back – Hold with both hands.
■ The Trigger Gun Safety Lock prevents the
trigger from accidentally being engaged.This
safety feature must be engaged when replac-
ing nozzles or not in use.
WARNING
The engine exhaust from this product contains
chemicals known to the State of California to
cause cancer, birth defects or other reproduc-
tive harm. Operation of this equipment may
create sparks that can start fires around dry
vegetation.A spark arrestor may be required.
Operator should contact local fire agencies for
laws or regulations.
CAUTION
Risk of Asphyxiation – Use this product only
in a well ventilated area.
■Operate and fuel machine in a well ventilated
area, free of devices featuring an open pilot
or flame such as boilers, water heaters, etc.
CAUTION
Risk of Fire – Do not add fuel when the prod-
uct is operating or still hot.
CAUTION
Risk of fire - Do not put container with flam-
mables products into the nozzle holder.
■Do not operate if fuel has been spilled. In-
stead, move machine to different location and
avoid creating sparks.
■This machine has hot surfaces which can
cause burns. Operate in a safe environment
and away from children.
■Do not touch hot surfaces or allow acces-
sories to contact hot surfaces.
■Do not leave machine running unattended.
■Avoid tipping machine on its side.
SAVE THESE INSTRUCTIONS

English 5
ASSEMBLY INSTRUCTIONS
CAUTION
When connecting to water supply mains, local
regulations of your municipal water company
must be observed.In some areas connecting
directly to public drinking water supply may
require a backflow prevention device. This is
to ensure that there is no feedback of chemi-
cals into the water supply. Use a water filter to
avoid potential damage from dirt in the water
supply.
■Garden hose must be at least 5/8 inch
diameter.
■ Flow rate of water supply must not fall below
2.5 GPM (gallons per minute)
WATER SUPPLY
(Cold Water Only)
Hardware (included)
Description Purpose Illustration Qty
AKnob 1/4" Joint Assembly 2
B1/4" X 1-1/2"
Bolt
Joint Assembly 1
C1/4" X 2-1/2"
Bolt
Wand Holder Assembly 1
DWand Holder Wand Holder Assembly 1
ENozzle Holder Nozzle Holder Assembly 1
FHigh Pressure
Hose
Spray Gun Assembly 1
■Flow rate can be determined by running the
water for one minute into an empty 5-gallon
container.
■ The water supply temperature must not ex-
ceed 104°F/40°C.
■Never use the pressure washer to draw in
water contaminated with solvents, e.g. paint
thinners, gasoline, oil, etc.
■Always prevent debris from being drawn into
the unit by using a clean water source. Use
additional water filter.
■Do not operate pressure washer without the
water turned on.