KC KC-3913 User manual

KC-3913
USER MANUAL

Manufactured under license from Dolby laboratories.Dolby and
double-D symbol are trademarks of Dolby laboratories.

Contents
Important Safety Instructions............................................................................................................................ 1
WARNING .................................................................................................................................................................. 1
Caution........................................................................................................................................................................ 1
Important ................................................................................................................................................................... 1
REGULATORY INFORMATION.......................................................................................................................... 1
GENERAL INFORMATION..................................................................................................................................3
Accessories ................................................................................................................................................................ 3
Batteries Installation of Remote-Control Unit............................................................................................................. 3
Base Assembly Guide.............................................................................................................................................4
Viewing the Control Panel...................................................................................................................................5
Remote Control........................................................................................................................................................6
TV Inputs&Outputs ................................................................................................................................................. 7
CONNECTIONS.....................................................................................................................................................8
Basic Use ...............................................................................................................................................................10
Powering the LED TV...........................................................................................................................................10
Setup Wizard ...........................................................................................................................................................10
Selecting Input Source..........................................................................................................................................................12
Main Menu...............................................................................................................................................................12
Application ...........................................................................................................................................................13
Operating the Menu ............................................................................................................................................. 13
Customizing the PICTURE Settings ...............................................................................................................15
Customizing the Audio Settings......................................................................................................................16
Customizing the TIMER Settings .................................................................................................................... 17
Customizing the SETUP Settings ....................................................................................................................18
Customizing the LOCK Settings ......................................................................................................................21
Customizing the CHANNEL Settings .............................................................................................................................. 23
Media Operation ................................................................................................................................................ 25
Photo..........................................................................................................................................................................26
Music..........................................................................................................................................................................27
PC Mode ............................................................................................................................................................... 28
Trouble shooting................................................................................................................................................ 29
Specifications...................................................................................................................................................... 30

1
Important Safety Instructions
WARNING
TO PREVENT DAMAGE WHICH MAY RESULT IN FIRE OR ELECTRIC SHOCK HAZARD,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
Caution
 To reduce the risk of electric shock, all servicing must be done by qualified service
personnel only.
 Any changes or modifications not expressly approved by SILO may void the user’s
warranty.
Important
One Federal Court has held that unauthorized recording of copyrighted TV programs is
an infringement of U.S. copyright laws.
Certain Canadian programs may also be copyrighted and any unauthorized recording
in whole or in part may be in violation of these rights.
REGULATORY INFORMATION
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a residential installation. This equipment generates, uses, and can radiate
radio frequency energy, and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
 Reorient or relocate the receiving antenna.
 Increase the separation between the equipment and receiver.
 Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.

2
 Consult the dealer or an experienced radio/TV technician for help.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water – The appliance should not be used near
water or moisture – for example, in a wet basement or near a swimming pool,
and the like.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the
manufacture’s instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding plug. A polarized
plug has two blades with one wider than the other. A grounding plug has two
blades and a third grounding prong. The wide blade or the third prong is
provided for your safety. If the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at the
plugs, convenience receptacles, and at the point where they exit from the
apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart or rack is used, use
caution when moving the cart/apparatus combination to avoid injury from
tip-over.
13) Unplug the apparatus during lightning storms or when unused for long periods
of time.
14) Refer all servicing to qualified personnel. Servicing is required when the
apparatus has been damaged in any way, such as power supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus has
been exposed to rain or moisture, does not operate normally, or has been
dropped.
15) CAUTION: These servicing instructions are for use by qualified service
personnel only. To reduce the risk of electric shock, do not perform any
servicing other than that contained in the operating instructions unless you are
qualified to do so.
16) Do not install this equipment in a confined or building-in space such as a book
case or similar unit, and remain a well ventilation conditions at open site. The

3
ventilation should not be impeded by covering the ventilation openings with
items such as newspaper, table-cloths, curtains etc.
17) WARNING: Only use attachments/accessories specified or provided by the
manufacturer (such as the exclusive supply adapter, battery etc).
GENERAL INFORMATION
Figures and illustrations in this User Manual are provided for reference only and may
dier from actual product appearance. Product design and specifications may be
changed without notice in order to enhance product performance.
Accessories
Remote Control Battery 1.5V
(AAA X2) User Manual
Please make sure the following items are included with your LED TV. If any items
are missing, contact your dealer.
The items color and shape may vary depending on the model.
Batteries Installation of Remote-Control Unit
1. Lift the cover at the back of the remote control upward as shown in the figure.
2. Install two AAA size batteries.
Make sure to match the ‘+’ and ‘-’ ends of the batteries with the diagram inside
the compartment.
3. Replace the cover.
Remove the batteries and store them in cool, dry place if you won’t be using the
remote control for a long time. (Assuming typical TV usage, the batteries should
last for about one year.)
If the remote control doesn’t work, check the following:
Is the TV power on?

4
 Are the plus and minus ends of the batteries reversed?
 Are the batteries drained?
 Is there a power outage or is the power cord unplugged?
 Is there a special fluorescent light or neon sign nearby?
Base Assembly Guide
Package List
TV Base Screw
1. Carefully place the TV faced down on a suitable surface with a soft cloth or cushion
with the base mounting facing towards you.
2. Place the base onto the TV, and fit the six base screws into the holes.

5
Viewing the Control Panel
The product color and shape may vary depending on the model.
You can use a button by pressing the side panel buttons.
1. VOL-/+: Press to increase or decrease the volume. In the on-screen menu, use
the
VOL+/- buttons as you would use the VOL+/- buttons on the remote
control.
2. CH /: Press to change channels. In the on-screen menu, use the CH / :
buttons as you would use the CH+/- buttons on the remote control.
3. : Press to see an on-screen menu of your TV’s features.
4. : Toggles between all the available input sources. In the on-screen menu,
use this button as you use the ENTER button on the remote control.
5. : Press to turn the TV on and off.

6
Remote Control
1. POWER: Turns the TV on and off.
2. Source: Press to display and select the available video
sources.
3. CC: Press to control the caption decoder.
4. MTS: Press to choose stereo, mono or Separate Audio
Program (SAP broadcast).
5. MUTE: Press to temporarily cut off the sound.
6. 0-9: Numeric buttons for direct channel selection or
track/chapter numbers.
7. - : Press to select additional channels (digital) being
broadcast by the same station. For example, to select
channel ‘5-3’, press ‘5’, then press -/-- and ‘3.’
8. R: Press to switch between the current and the previous
channel.
9. Guide: Selects Electronic Programmer Guide.
10. Info: Press to display information to the TV screen.
11. ▲/▼/◄/►/ENTER: Use to select on-screen menu items
or change channels and increase or decrease the
volume and change menu values.
12. MENU: Press to display the main on-screen menu.
13. EXIT: Exits setup menus.
14. VOL+/-: Press to increase or decrease the volume.
15. CH+/-: Press to change channels.
16. ASPECT: Selects different picture size modes.
17. FREEZE: Freezes picture. Press again to restore normal
viewing.
18. SLEEP: Press to set up the TV auto turn off time.
19. FAV: Displays Favorite program list.
20. Add/Del: Press to add/remove the highlighted channel
as favorite.
21. FAV+: Add a favorite program.
22. FAV-: Remove a favorite program.
23. PMODE: Press to select the picture mode.
24. SMODE: Press to select the sound mode.
25. TV: Press to select the TV mode directly.
26. USB: Press to select the USB mode directly.

7
TV Inputs & Outputs
1. EARPHONE: Stereo output to headphones only.
2. COAXIAL: Coaxial output.
3. YPbPr/ AV&R/ L: AV & Interlace or Sequential Component Video Input, “typical
use PS3 or X Box”.
4. 5.HDMI1, HDMI2 & HDMI3: Input from HDMI source (High Definition).
6.VGA & PC AUDIO: PC input (RGB) & Stereo audio input from PC (Used in
connecting with VGA input).
7.TV: RF input from TV aerial or cable source.
8.USB: USB port.

8
CONNECTIONS
PC Connections:
-Connect VGA (15 pin)
plug into TV and PC.
-Connect stereo
-Use SOURCE button to
select VGA.
Antenna or cable.
HDMI:
-Connect HDMI input.
-Use SOURCE button to select HDMI.
HDMI Input
Hard Drive:
-Switch TV to standby
and insert either
the USB Hard Drive
or USB Storage Device
-Use SOURCE/INPUT
button to select “USB”.

9
YPbPr/AV:
-Connect YPbPr or AV leads and audio leads to TV and
appliance. It is good to use dedicated YPbPr or AV leads
from your retailer.
-Use SOURCE/INPUT button to select YPbPr or AV.
HDMI:
-Connect HDMI input.
-Use SOURCE button to select HDMI.
HDMI Input
Coaxial:
-Connect to the Digital Amplifier
Earphone:
-Plug in headphones. Set volume
level for comfortable listening.
-Note: Do NOT use headphones at
High volume levels for prolonged periods.

10
Basic Use
Powering the LED TV
Power on/off
 To turn the LED TV on:
Press the “POWER” button.
 To turn the LED TV off:
Press the “POWER” button on the LED TV.
 To turn on/off by remote control:
Press the “POWER” button of the remote control.
Setup Wizard
You can select between the TV signal and the input signal of other
equipments connected to the TV.
Connect an RF cable from the TV’s input called “RF-In” and to your TV Aerial socket.
Select Language
Press ◄/►buttons to select the language to be used for menu and message.
Press ▲/▼buttons to select go to next step and press ENTER/►button to go.
Select Time
Press ▲/▼buttons to select the time zone, daylight saving time and time format you
want to.
Press ◄/►buttons on the remote control to adjust.
Press ▲/▼buttons on the remote control to select go to next step and press ENTER/►
button to go.

11
Select Time
Press ◄/►buttons to select the antenna type.
Press ▲/▼buttons to select go to next step and press ENTER/►button to start auto
scan.

12
Selecting Input Source
You can select between the TV signal and the input signal of other
equipments connected to the TV.
Use this function to switch to the input source you wish to view.
Press SOURCE button on the remote control.
Use ▲/▼buttons to move to the desired input source.
Press ►button to select.
Main Menu
Press MENU to display the main menu or return to the previous menu or close the
main menu.
Press ◄/►to highlight the desired menu icon, and press ENTER to select.

13
Application
Operating the Menu
1. Press the POWER button to turn the LED TV on.
2. Press the MENU button on the remote control, the on-screen menu will appear on
the screen.
3. Use the ◄/►buttons to select your main menu option.
PICTURE MENU:
Allows you to make adjustments your picture settings. (Select TV sources for example)
SOUND MENU:
Allows you customize the sound options and effects. (Select TV source for example)
TIMER MENU:
Allows you to set up variety of timer options. (Select TV source)

14
SETUP MENU:
Allows you to set up a variety of setup options. (Select TV source)
LOCK MENU:
Allows you to set up a variety of lock options. (Select TV source)
CHANNEL MENU:
Allows you to search channels and set up a variety of channel options. (Select TV source)
4. Use the ▲/▼buttons to select an option of the sub-menu, and press the ►
button.
While in adjustment mode, use the ◄/►button to change the value of the item.
5. Press the MENU button to exit the menu.
Note:
Some items may be deactivated when the cable is not plugged in.

15
Customizing the Picture Settings
Select TV source for example. (Press SOURCE button to select TV mode)
1. Press the POWER button to turn the LED TV on.
2. Press the MENU button on the remote control to display the Main menu, and use
the ◄/►buttons to select the PICTURE.
3. Use the ▲/▼buttons to highlight an individual PICTURE option, use the ◄/►
buttons to change the setting, and press the MENU button to exit the menu.
The PICTURE menu includes the following options:
Picture Mode
Cycle among picture display modes: Standard, Dynamic, Soft, User,
Power Saving.
Brightness
Control the overall brightness of the picture.
Contrast
Control the difference between the brightness and darkest regions of
the picture.
Color
Control the color.
Tint
Controls the tint.
Sharpness
Increase this setting to see crisp edges in the picture; decrease it for
soft edges.
Color Temp.
Cycles among color modes: Normal, Cool, Warm.
Advanced
Settings
Adjust advanced video features to fine tune the picture.
Press ►button to enter sub-menu.

16
Aspect
Ratio
Allow you to use the ◄/►buttons to select: Normal,
Wide, Zoom, Cinema.
Noise
Reduction
Allow you to use the ◄/►buttons to
select: Off,
Low, Medium, High, and Auto.
Dynamic
Contrast
Allow you to use the
◄
/
►
buttons to select: Off, On.
HDMI
Mode
Allow you to use the ◄/►buttons to select: Video,
Graphic.
Customizing the Audio Settings
Select TV source for example. (Press SOURCE button to select TV mode)
1. Press the POWER button to turn the LED TV on.
2. Press the MENU button on the remote control to display the Main menu, and use
the ◄/►buttons to select the AUDIO.
3. Use the ▲/▼buttons to highlight an individual AUDIO option, use the ◄/►
buttons to change the setting, and press the MENU button to exit the menu.