KEY POWER KP500 User manual
POWERKE Y
MANUAL PORTUGUÊS | ENGLISH
MULTI FUNCTION KEYBOARD
KP500
B. The usage of A/C adapter
Use only the YONGMEI AC adapter to power your instrument from AC mains. The method to use
the AC adapter is to put one end into the jack at the back of the keyboard and the other end into
the outlet of AC mains.
C. The usage of external terminal ports
External sustain pedal jack: this keyboard with sustain pedal ports, plug the plug into the port it
can take eect.
MIDI connector: this function uses for audio output and other connected installations that have a
MIDI IN function.
Audio line input: this keyboard with stereo function, it support phone, USB music player, computer
or other audio signal input the keyboard to play.
Firstly turn o the keyboard, plug the audio plug into the facility and the other end plug into the
keyboard and then turn on the keyboard.
Microphone input: Plug the microphone plug into the port, than you can use while playing the
keyboard.
Line out:Insert the plug of the speaker into [speaker] socket, and the performance eect will be
enhanced.
Earphone output:Plug the earphone plug into the port, in order to avoid inuencing other people
while the keyboard is learned.
III. The Function Operation
Press the button [power switch] then you can start playing when the number 120 appears on LCD.
1. Basic performance
Volume controlling
(1)Master volume control:16 grades in all, 12 grades is the default opening volume, press the
button [+/-] to turn up or turn down the volume.
(2)Chord volume:10 grades in all,controlling the volume of chord rhythm.
(3)Rhythm volume:10 grades in all, adjust the volume of keyboard percussion music.
(4)Press the button [+/-] no loosen for 2 seconds, you can turn up or turn down the volume
quickly.Press the button [+/-] at the same time for 2 seconds,the volume restore the default values.
(5)Timbre selection: in usual mode, press the button [timbre] then you can choose the timbre,300
timbres for selection. The number 000 piano is the opening default timbre.Press the button [+/-] or
3 numbers to choose the timbre.
(6）Keyboard percussion music:press the button [keyboard percussion music] at this time the
keyboard turn into the keyboard percussion music,each pair of them has corresponding relation.
Press the button again to quit the function.
2. Auto accompaniment
(1)Rhythms selection
300 rhythms in all to choose, in usual mode, press the button [timbre] to start this function,the
number 00 is the default opening rhythm. Press 3 number key or [+/-] to choose the rhythm.
(2) Rhythms start and stop
Press the button [start/stop] to start this function, the beat with the light, press the button again to
quit this function.
(3) Fill-in,prelude and postlude
In rhythm playing mode,press the button [ll-in] to play the rhythm , after the
rhythm press the button [prelude/postlude] to enter the prelude mode, after tho
prelude playing mode will go into the postlude playing mode automatically.
(4) Sync function
Press the button [sync] to start the sync function, at this time press the 19 bass button, the rhythm
will be played, and quit the sync function at the same time.
(5) Tempo function
Press the button [metronome] to start the metronome with a sound“dida", playing with a tempo
eect. Press the button continuously, 1/4, 2/4, 3/4, 4/4 and stop, four metronome for selection,
press the button the LCD displays " normal" then you can quit the function.
Tempo setting
120 is the opening default tempo, press the button [+/-] to adjust the tempo, the
adjustment scope is between 30 to 240.
3. Auto bass chord
Single nger bass chord
When rhythm is in service, press the button [single nger chord] to start corresponding automatic
accompaniment chord function,at this time you can play with single ngering in the 19 bass button
area with chord accompaniment, press the button again to quit the function. When the rhythm is not
in service. press the button [single nger chord] to start the single nger chord function, at this time
you can play with single nger chord, press the button again to quit the function.
Multi-nger chord
When rhythm is in service. press the button [multi- nger chord] to start the auto bass chord, at this
time you can play with multi ngering in the 19 bass button area with chord accompaniment, Press
the button [multi-nger chord] again or [chord o] to end this function.
Comprehensive chord
When rhythm is in service, press the button [comprehensive chord] to start this function, at this time
you can play with single nger chord or multi-nger chord. Press the button again to quit the
function.
All of these three functions are displayed on LCD to lead you to play the keyboard.
Status register
According the playing need, after adjusted the timbre, rhythm, tempo, press the button[memory] or
[memory 1-4] the playing timbre, rhythm, tempo are renewing the corresponding state of the
system.
4. Eect control
Sustain & vibrato
Press the button [sustain] to enter the sustain function,the endnotes played are lengthened.
Press the button [vibrato] to enter the function, the pitch of the notes vibrates within a limited
range.
When sustain & vibrato is in service LCD will display the instruction.
Rising tone & falling tone
Press the button [transposition] to adjust the tone,it is able to adjust to increase 6 grades or reduce
6 grades. Press the button [+] and [-] at the meantime, the transposition turned into 0, LCD display
the pitch for 3 seconds.
Touch response keyboard
This keyboard with touch response function,is start on default when keyboard is turn on,the
volume is depend on the touch strength, press the button [touch response keyboard] again to quit
this function, LCD will display the instruction.
Split
Press the button [split] the keyboard divide into two areas, at this time LCD displays the second
timbre, press the button [+/-] to change the timbre, press
the button [split] again to quit this function.
Double timbre playing
Press the button [double timbre] to play the notes with combinational two timbres, at this time the
timbres displayed is the second one, press the button [+/-] to change the timbre, press the button
[double timbre] again to quit this function.
Tune function
Press the button [+/-] to adjust the tune, the adjustment scope is -99 to 99.
Demo song
30 demo songs for your selection, please see in attachment 3. Press the button [demo] to play the
demo song cyclically. Press the button [+/-] to choose the demo song.
Teaching function
Press the button [single-key] [follow] or [concert] to enter the corresponding teaching mode,LCD
display the corresponding state.
A.Single-key: the note button is pressed to continue the music, whether or not you play the right
note, you will get the right sound. The song still goes on.
B.Follow:the main melody is shielded it seems like karaoke,the song would not stop, if you do not
play the keyboard for three seconds, the main melody will
renew.
C. Concert:only the note pressed correctly, the song would goes on, the song would played
cyclical, press the [single-key] [follow] or [concert] to quit the function.
Recording
Press the button [record] to go into the function, the notes recorded about 110 notes, the notes
playing will be recorded. Neither ngering nor percussion would be recorded. New notes can be
added till the room is full.When recording is under way. press [playback] to play the recorded notes
one by one, LCD display the corresponding state ,when the room is full the LCD will display“full"
for 4 second , press the [record] button again to quit the function.
Rhythm programming
Press the button [program] to go into the programming mode and the corresponding mode
display on LCD.In the programming mode to edit drums into the keyboard, only one drum can be
edit at a time and drums edited should not exceed the maximum number 32. press a key once to
edit an empty beat more than 32 notes LCD will display “full" for 3 second.In programming mode.
press [program] to end this function and get into normal function, at this time corresponding
mode display on LCD.
In programming mode,press [playback] to play the drums edited cyclically, forming a rhythm of
self- edited style,corresponding state displayed on LCD. In this mode you can choose dierent
timbre to play.
5. With USB music player
Volume [+] and [-]:the volume button is pressed to increase the volume or reduce the volume.
Prev.music/ next .music: the prev button or next button is pressed to select prev music or next
music, the pressing on the two buttons are fast-back or fast-forward.
EQ mode:EQ button is pressed every time, the normal mode, jazz mode, classical mode,popular
mode and rock and roll mode is changed in turn.
Playing mode: the button is pressed for the rst time, and the music in the le is played; the button
is pressed for the second time, and the mode is change into the single-cycle mode.The button is
pressed for the third time, and the mode is change into the random playing mode.
Playing:the U disk is learned before the power is on. The playing button is pressed to play the
music. It only support MP3 sound format.
www.templodosinstrumentos.com.br
B. The usage of A/C adapter
Use only the YONGMEI AC adapter to power your instrument from AC mains. The method to use
the AC adapter is to put one end into the jack at the back of the keyboard and the other end into
the outlet of AC mains.
C. The usage of external terminal ports
External sustain pedal jack: this keyboard with sustain pedal ports, plug the plug into the port it
can take eect.
MIDI connector: this function uses for audio output and other connected installations that have a
MIDI IN function.
Audio line input: this keyboard with stereo function, it support phone, USB music player, computer
or other audio signal input the keyboard to play.
Firstly turn o the keyboard, plug the audio plug into the facility and the other end plug into the
keyboard and then turn on the keyboard.
Microphone input: Plug the microphone plug into the port, than you can use while playing the
keyboard.
Line out:Insert the plug of the speaker into [speaker] socket, and the performance eect will be
enhanced.
Earphone output:Plug the earphone plug into the port, in order to avoid inuencing other people
while the keyboard is learned.
III. The Function Operation
Press the button [power switch] then you can start playing when the number 120 appears on LCD.
1. Basic performance
Volume controlling
(1)Master volume control:16 grades in all, 12 grades is the default opening volume, press the
button [+/-] to turn up or turn down the volume.
(2)Chord volume:10 grades in all,controlling the volume of chord rhythm.
(3)Rhythm volume:10 grades in all, adjust the volume of keyboard percussion music.
(4)Press the button [+/-] no loosen for 2 seconds, you can turn up or turn down the volume
quickly.Press the button [+/-] at the same time for 2 seconds,the volume restore the default values.
(5)Timbre selection: in usual mode, press the button [timbre] then you can choose the timbre,300
timbres for selection. The number 000 piano is the opening default timbre.Press the button [+/-] or
3 numbers to choose the timbre.
(6）Keyboard percussion music:press the button [keyboard percussion music] at this time the
keyboard turn into the keyboard percussion music,each pair of them has corresponding relation.
Press the button again to quit the function.
2. Auto accompaniment
(1)Rhythms selection
300 rhythms in all to choose, in usual mode, press the button [timbre] to start this function,the
number 00 is the default opening rhythm. Press 3 number key or [+/-] to choose the rhythm.
(2) Rhythms start and stop
Press the button [start/stop] to start this function, the beat with the light, press the button again to
quit this function.
(3) Fill-in,prelude and postlude
In rhythm playing mode,press the button [ll-in] to play the rhythm , after the
rhythm press the button [prelude/postlude] to enter the prelude mode, after tho
prelude playing mode will go into the postlude playing mode automatically.
(4) Sync function
Press the button [sync] to start the sync function, at this time press the 19 bass button, the rhythm
will be played, and quit the sync function at the same time.
(5) Tempo function
Press the button [metronome] to start the metronome with a sound“dida", playing with a tempo
eect. Press the button continuously, 1/4, 2/4, 3/4, 4/4 and stop, four metronome for selection,
press the button the LCD displays " normal" then you can quit the function.
Tempo setting
120 is the opening default tempo, press the button [+/-] to adjust the tempo, the
adjustment scope is between 30 to 240.
3. Auto bass chord
Single nger bass chord
When rhythm is in service, press the button [single nger chord] to start corresponding automatic
accompaniment chord function,at this time you can play with single ngering in the 19 bass button
area with chord accompaniment, press the button again to quit the function. When the rhythm is not
in service. press the button [single nger chord] to start the single nger chord function, at this time
you can play with single nger chord, press the button again to quit the function.
Multi-nger chord
When rhythm is in service. press the button [multi- nger chord] to start the auto bass chord, at this
time you can play with multi ngering in the 19 bass button area with chord accompaniment, Press
the button [multi-nger chord] again or [chord o] to end this function.
Comprehensive chord
When rhythm is in service, press the button [comprehensive chord] to start this function, at this time
you can play with single nger chord or multi-nger chord. Press the button again to quit the
function.
All of these three functions are displayed on LCD to lead you to play the keyboard.
Status register
According the playing need, after adjusted the timbre, rhythm, tempo, press the button[memory] or
[memory 1-4] the playing timbre, rhythm, tempo are renewing the corresponding state of the
system.
4. Eect control
Sustain & vibrato
Press the button [sustain] to enter the sustain function,the endnotes played are lengthened.
Press the button [vibrato] to enter the function, the pitch of the notes vibrates within a limited
range.
When sustain & vibrato is in service LCD will display the instruction.
Rising tone & falling tone
Press the button [transposition] to adjust the tone,it is able to adjust to increase 6 grades or reduce
6 grades. Press the button [+] and [-] at the meantime, the transposition turned into 0, LCD display
the pitch for 3 seconds.
Touch response keyboard
This keyboard with touch response function,is start on default when keyboard is turn on,the
volume is depend on the touch strength, press the button [touch response keyboard] again to quit
this function, LCD will display the instruction.
Split
Press the button [split] the keyboard divide into two areas, at this time LCD displays the second
timbre, press the button [+/-] to change the timbre, press
the button [split] again to quit this function.
Double timbre playing
Press the button [double timbre] to play the notes with combinational two timbres, at this time the
timbres displayed is the second one, press the button [+/-] to change the timbre, press the button
[double timbre] again to quit this function.
Tune function
Press the button [+/-] to adjust the tune, the adjustment scope is -99 to 99.
Demo song
30 demo songs for your selection, please see in attachment 3. Press the button [demo] to play the
demo song cyclically. Press the button [+/-] to choose the demo song.
Teaching function
Press the button [single-key] [follow] or [concert] to enter the corresponding teaching mode,LCD
display the corresponding state.
A.Single-key: the note button is pressed to continue the music, whether or not you play the right
note, you will get the right sound. The song still goes on.
B.Follow:the main melody is shielded it seems like karaoke,the song would not stop, if you do not
play the keyboard for three seconds, the main melody will
renew.
C. Concert:only the note pressed correctly, the song would goes on, the song would played
cyclical, press the [single-key] [follow] or [concert] to quit the function.
Recording
Press the button [record] to go into the function, the notes recorded about 110 notes, the notes
playing will be recorded. Neither ngering nor percussion would be recorded. New notes can be
added till the room is full.When recording is under way. press [playback] to play the recorded notes
one by one, LCD display the corresponding state ,when the room is full the LCD will display“full"
for 4 second , press the [record] button again to quit the function.
Rhythm programming
Press the button [program] to go into the programming mode and the corresponding mode
display on LCD.In the programming mode to edit drums into the keyboard, only one drum can be
edit at a time and drums edited should not exceed the maximum number 32. press a key once to
edit an empty beat more than 32 notes LCD will display “full" for 3 second.In programming mode.
press [program] to end this function and get into normal function, at this time corresponding
mode display on LCD.
In programming mode,press [playback] to play the drums edited cyclically, forming a rhythm of
self- edited style,corresponding state displayed on LCD. In this mode you can choose dierent
timbre to play.
5. With USB music player
Volume [+] and [-]:the volume button is pressed to increase the volume or reduce the volume.
Prev.music/ next .music: the prev button or next button is pressed to select prev music or next
music, the pressing on the two buttons are fast-back or fast-forward.
EQ mode:EQ button is pressed every time, the normal mode, jazz mode, classical mode,popular
mode and rock and roll mode is changed in turn.
Playing mode: the button is pressed for the rst time, and the music in the le is played; the button
is pressed for the second time, and the mode is change into the single-cycle mode.The button is
pressed for the third time, and the mode is change into the random playing mode.
Playing:the U disk is learned before the power is on. The playing button is pressed to play the
music. It only support MP3 sound format.
Obrigado por adquirir o teclado eletrônico KP500. Tem uma força expressiva forte com uma
aparência bonita. Ele fornece uma maneira fácil de aprender e tocar o teclado. Este teclado não é
apenas um instrumento musical perfeito, mas também um instrumento ideal na educação musical
e também. Leia atentamente o guia antes de usar nosso produto e guarde-o para referência.
CARACTERÍSTICA ESPECIAL
• 61 Teclado com resposta ao toque com estilo de piano / LCD
• Com USB Music Player / USB Music Volume Control
• Suporte USB Receptor Bluetooth / Entrada de Áudio
• 300 timbres / 300 ritmos / 61 músicas de percussão de teclado
• 30 músicas demo / 3 modos de ensino
• Controle de Volume Principal / Controle de Tempo / Controle de Transposição
• Controle de volume de acordes / Controle de volume de acompanhamento / Controle de centavo
• Função de quatro memórias / MIDI OUT / Metronome / Split / Double Timbres
• Sustain / Vibrato / Record / Program / Playback
• Sincronizar / Iniciar / Parar / Preencher / Prelúdio / Adiar
• Acorde com um dedo / Acorde com vários dedos / Acorde desativado
• Modo de reprodução / modo EQ / releitura AB
• Anterior Anterior Próximo Próximo Próximo Próximo Próximo Próximo
• Alimentação externa / Microfone externo / Fone de ouvido externo
• Pedal de sustentação externa / saída de linha
PRECAUÇÃO
• O adaptador especicado é usado apenas. O uso do adaptador incorreto pode resultar em danos ao
instrumento e superaquecimento. Se o cabo do adaptador de A / C ou o plugue car desgastado ou
danicado, haverá uma súbita perda de som enquanto o instrumento é tocado e os cheiros ou plugues
do adaptador incomuns da tomada, o instrumento deve ser inspecionado por um técnico qualicado.
• Depois que o botão liga / desliga é pressionado, a energia do teclado é desligada e o plugue deve ser
retirado para evitar queimar as partes internas ou causar incêndio por causa de uma longa conexão com
a energia.
• A embalagem plástica deve ser mantida em um local seguro, a m de evitar a asxia quando uma
criança se diverte colocando a cabeça nela.
• A superfície do teclado deve ser mantida limpa para evitar que os olhos pisquem no instrumento
através das pequenas aberturas do interruptor ou lacunas entre as teclas. Limpar a aparência do teclado
com pano macio é necessário em horário xo e o teclado é mantido longe da água vapor.
• O instrumento não deve ser exposto à luz solar forte por muito tempo.
• O teclado deve ser colocado em um local seco quando não for usado. Vibrações fortes ou colisões são
proibidas para evitar danos ao quadro ou às partes internas.
• O instrumento deve ser mantido longe da acidez ou de locais alcalinos e é proibido tocar o instrumento
sob a circunstância de corrosão do gás, a m de evitar contato inadequado com a oxidação do circuito
.
• O teclado eletrônico é um instrumento preciso, qualquer modicação pode resultar em mau funciona-
mento. Quando a falha ocorre, o teclado deve ser levado a um departamento de serviço pós-venda
prossional ou a técnicos experientes para manutenção. É proibido desmontar ou montar os compo-
nentes dentro do teclado à vontade.
B. The usage of A/C adapter
Use only the YONGMEI AC adapter to power your instrument from AC mains. The method to use
the AC adapter is to put one end into the jack at the back of the keyboard and the other end into
the outlet of AC mains.
C. The usage of external terminal ports
External sustain pedal jack: this keyboard with sustain pedal ports, plug the plug into the port it
can take eect.
MIDI connector: this function uses for audio output and other connected installations that have a
MIDI IN function.
Audio line input: this keyboard with stereo function, it support phone, USB music player, computer
or other audio signal input the keyboard to play.
Firstly turn o the keyboard, plug the audio plug into the facility and the other end plug into the
keyboard and then turn on the keyboard.
Microphone input: Plug the microphone plug into the port, than you can use while playing the
keyboard.
Line out:Insert the plug of the speaker into [speaker] socket, and the performance eect will be
enhanced.
Earphone output:Plug the earphone plug into the port, in order to avoid inuencing other people
while the keyboard is learned.
III. The Function Operation
Press the button [power switch] then you can start playing when the number 120 appears on LCD.
1. Basic performance
Volume controlling
(1)Master volume control:16 grades in all, 12 grades is the default opening volume, press the
button [+/-] to turn up or turn down the volume.
(2)Chord volume:10 grades in all,controlling the volume of chord rhythm.
(3)Rhythm volume:10 grades in all, adjust the volume of keyboard percussion music.
(4)Press the button [+/-] no loosen for 2 seconds, you can turn up or turn down the volume
quickly.Press the button [+/-] at the same time for 2 seconds,the volume restore the default values.
(5)Timbre selection: in usual mode, press the button [timbre] then you can choose the timbre,300
timbres for selection. The number 000 piano is the opening default timbre.Press the button [+/-] or
3 numbers to choose the timbre.
(6）Keyboard percussion music:press the button [keyboard percussion music] at this time the
keyboard turn into the keyboard percussion music,each pair of them has corresponding relation.
Press the button again to quit the function.
2. Auto accompaniment
(1)Rhythms selection
300 rhythms in all to choose, in usual mode, press the button [timbre] to start this function,the
number 00 is the default opening rhythm. Press 3 number key or [+/-] to choose the rhythm.
(2) Rhythms start and stop
Press the button [start/stop] to start this function, the beat with the light, press the button again to
quit this function.
(3) Fill-in,prelude and postlude
In rhythm playing mode,press the button [ll-in] to play the rhythm , after the
rhythm press the button [prelude/postlude] to enter the prelude mode, after tho
prelude playing mode will go into the postlude playing mode automatically.
(4) Sync function
Press the button [sync] to start the sync function, at this time press the 19 bass button, the rhythm
will be played, and quit the sync function at the same time.
(5) Tempo function
Press the button [metronome] to start the metronome with a sound“dida", playing with a tempo
eect. Press the button continuously, 1/4, 2/4, 3/4, 4/4 and stop, four metronome for selection,
press the button the LCD displays " normal" then you can quit the function.
Tempo setting
120 is the opening default tempo, press the button [+/-] to adjust the tempo, the
adjustment scope is between 30 to 240.
3. Auto bass chord
Single nger bass chord
When rhythm is in service, press the button [single nger chord] to start corresponding automatic
accompaniment chord function,at this time you can play with single ngering in the 19 bass button
area with chord accompaniment, press the button again to quit the function. When the rhythm is not
in service. press the button [single nger chord] to start the single nger chord function, at this time
you can play with single nger chord, press the button again to quit the function.
Multi-nger chord
When rhythm is in service. press the button [multi- nger chord] to start the auto bass chord, at this
time you can play with multi ngering in the 19 bass button area with chord accompaniment, Press
the button [multi-nger chord] again or [chord o] to end this function.
Comprehensive chord
When rhythm is in service, press the button [comprehensive chord] to start this function, at this time
you can play with single nger chord or multi-nger chord. Press the button again to quit the
function.
All of these three functions are displayed on LCD to lead you to play the keyboard.
Status register
According the playing need, after adjusted the timbre, rhythm, tempo, press the button[memory] or
[memory 1-4] the playing timbre, rhythm, tempo are renewing the corresponding state of the
system.
4. Eect control
Sustain & vibrato
Press the button [sustain] to enter the sustain function,the endnotes played are lengthened.
Press the button [vibrato] to enter the function, the pitch of the notes vibrates within a limited
range.
When sustain & vibrato is in service LCD will display the instruction.
Rising tone & falling tone
Press the button [transposition] to adjust the tone,it is able to adjust to increase 6 grades or reduce
6 grades. Press the button [+] and [-] at the meantime, the transposition turned into 0, LCD display
the pitch for 3 seconds.
Touch response keyboard
This keyboard with touch response function,is start on default when keyboard is turn on,the
volume is depend on the touch strength, press the button [touch response keyboard] again to quit
this function, LCD will display the instruction.
Split
Press the button [split] the keyboard divide into two areas, at this time LCD displays the second
timbre, press the button [+/-] to change the timbre, press
the button [split] again to quit this function.
Double timbre playing
Press the button [double timbre] to play the notes with combinational two timbres, at this time the
timbres displayed is the second one, press the button [+/-] to change the timbre, press the button
[double timbre] again to quit this function.
Tune function
Press the button [+/-] to adjust the tune, the adjustment scope is -99 to 99.
Demo song
30 demo songs for your selection, please see in attachment 3. Press the button [demo] to play the
demo song cyclically. Press the button [+/-] to choose the demo song.
Teaching function
Press the button [single-key] [follow] or [concert] to enter the corresponding teaching mode,LCD
display the corresponding state.
A.Single-key: the note button is pressed to continue the music, whether or not you play the right
note, you will get the right sound. The song still goes on.
B.Follow:the main melody is shielded it seems like karaoke,the song would not stop, if you do not
play the keyboard for three seconds, the main melody will
renew.
C. Concert:only the note pressed correctly, the song would goes on, the song would played
cyclical, press the [single-key] [follow] or [concert] to quit the function.
Recording
Press the button [record] to go into the function, the notes recorded about 110 notes, the notes
playing will be recorded. Neither ngering nor percussion would be recorded. New notes can be
added till the room is full.When recording is under way. press [playback] to play the recorded notes
one by one, LCD display the corresponding state ,when the room is full the LCD will display“full"
for 4 second , press the [record] button again to quit the function.
Rhythm programming
Press the button [program] to go into the programming mode and the corresponding mode
display on LCD.In the programming mode to edit drums into the keyboard, only one drum can be
edit at a time and drums edited should not exceed the maximum number 32. press a key once to
edit an empty beat more than 32 notes LCD will display “full" for 3 second.In programming mode.
press [program] to end this function and get into normal function, at this time corresponding
mode display on LCD.
In programming mode,press [playback] to play the drums edited cyclically, forming a rhythm of
self- edited style,corresponding state displayed on LCD. In this mode you can choose dierent
timbre to play.
5. With USB music player
Volume [+] and [-]:the volume button is pressed to increase the volume or reduce the volume.
Prev.music/ next .music: the prev button or next button is pressed to select prev music or next
music, the pressing on the two buttons are fast-back or fast-forward.
EQ mode:EQ button is pressed every time, the normal mode, jazz mode, classical mode,popular
mode and rock and roll mode is changed in turn.
Playing mode: the button is pressed for the rst time, and the music in the le is played; the button
is pressed for the second time, and the mode is change into the single-cycle mode.The button is
pressed for the third time, and the mode is change into the random playing mode.
Playing:the U disk is learned before the power is on. The playing button is pressed to play the
music. It only support MP3 sound format.
3
I. Botão de controle do painel e portas de terminal externas
1. Botão de controle do painel
Tomada externa na parte de trás do teclado
II. A Preparação para tocar
LIGAR
A. O uso da bateria
Abra a tampa do compartimento da bateria na parte inferior do teclado,
insira baterias de 8 tamanhos (1,5v), as mesmas polaridades do sinal
mostrado na parte inferior, recoloque a tampa.
Após o esgotamento da bateria e a tensão atingir uma faixa de valor, o teclado ca sem som ou o
som do timbre se perde.
A bateria (8 tamanhos) deve ser trocada. Se a bateria não for usada por um longo tempo, as
baterias devem ser retiradas para evitar danos aos componentes.
1) Power Switch
2) Master Volume Adjust
3) Accompaniment
Volume Adjust
4) Chord Volume Adjust
5) Tempo Adjust
6) Transposition Adjust
7) Tune Adjust
8) 4Memory Function
9) Midi out
10) Metronome
11) Song
12) Timbre
13) Rhythm
14) Record
15) Playback
16) Program
17) Touch Response
Keyboard
18) Sustain
19) Vibrato
20) Number Select
Keyboard
21) Start/Stop
22) Single Finger Chord
23) Sync
24) Multi-Finger Chord
25) Fill-in
26) Comprehensive Chord
27) Prelude/Postlude
28) Chord O
29) Keyboard Percussion
30) Demo
31) Teaching1:Single-keyboard
32) Teaching2:Follow
33) Teaching3: Concert
34) Split
35) Double Timbre
36) Volume Adjust
37) Playing Mode
38) EQ Mode
39) Play/Pause
40) AB Reread
41) Prev/Next Music Select
42) USB Jack
43) SUSTAIN: External Sustain Pedal Output Jack
44) MIDI: MIDI Jack
45) AUDIO INPUT: Line Input Jack
46) MIC: Microphone Jack
47) OUT: Line Input Jack
48) PHONES: Earphone Jack
49) DC 12V JACK
B. The usage of A/C adapter
Use only the YONGMEI AC adapter to power your instrument from AC mains. The method to use
the AC adapter is to put one end into the jack at the back of the keyboard and the other end into
the outlet of AC mains.
C. The usage of external terminal ports
External sustain pedal jack: this keyboard with sustain pedal ports, plug the plug into the port it
can take eect.
MIDI connector: this function uses for audio output and other connected installations that have a
MIDI IN function.
Audio line input: this keyboard with stereo function, it support phone, USB music player, computer
or other audio signal input the keyboard to play.
Firstly turn o the keyboard, plug the audio plug into the facility and the other end plug into the
keyboard and then turn on the keyboard.
Microphone input: Plug the microphone plug into the port, than you can use while playing the
keyboard.
Line out:Insert the plug of the speaker into [speaker] socket, and the performance eect will be
enhanced.
Earphone output:Plug the earphone plug into the port, in order to avoid inuencing other people
while the keyboard is learned.
III. The Function Operation
Press the button [power switch] then you can start playing when the number 120 appears on LCD.
1. Basic performance
Volume controlling
(1)Master volume control:16 grades in all, 12 grades is the default opening volume, press the
button [+/-] to turn up or turn down the volume.
(2)Chord volume:10 grades in all,controlling the volume of chord rhythm.
(3)Rhythm volume:10 grades in all, adjust the volume of keyboard percussion music.
(4)Press the button [+/-] no loosen for 2 seconds, you can turn up or turn down the volume
quickly.Press the button [+/-] at the same time for 2 seconds,the volume restore the default values.
(5)Timbre selection: in usual mode, press the button [timbre] then you can choose the timbre,300
timbres for selection. The number 000 piano is the opening default timbre.Press the button [+/-] or
3 numbers to choose the timbre.
(6）Keyboard percussion music:press the button [keyboard percussion music] at this time the
keyboard turn into the keyboard percussion music,each pair of them has corresponding relation.
Press the button again to quit the function.
2. Auto accompaniment
(1)Rhythms selection
300 rhythms in all to choose, in usual mode, press the button [timbre] to start this function,the
number 00 is the default opening rhythm. Press 3 number key or [+/-] to choose the rhythm.
(2) Rhythms start and stop
Press the button [start/stop] to start this function, the beat with the light, press the button again to
quit this function.
(3) Fill-in,prelude and postlude
In rhythm playing mode,press the button [ll-in] to play the rhythm , after the
rhythm press the button [prelude/postlude] to enter the prelude mode, after tho
prelude playing mode will go into the postlude playing mode automatically.
(4) Sync function
Press the button [sync] to start the sync function, at this time press the 19 bass button, the rhythm
will be played, and quit the sync function at the same time.
(5) Tempo function
Press the button [metronome] to start the metronome with a sound“dida", playing with a tempo
eect. Press the button continuously, 1/4, 2/4, 3/4, 4/4 and stop, four metronome for selection,
press the button the LCD displays " normal" then you can quit the function.
Tempo setting
120 is the opening default tempo, press the button [+/-] to adjust the tempo, the
adjustment scope is between 30 to 240.
3. Auto bass chord
Single nger bass chord
When rhythm is in service, press the button [single nger chord] to start corresponding automatic
accompaniment chord function,at this time you can play with single ngering in the 19 bass button
area with chord accompaniment, press the button again to quit the function. When the rhythm is not
in service. press the button [single nger chord] to start the single nger chord function, at this time
you can play with single nger chord, press the button again to quit the function.
Multi-nger chord
When rhythm is in service. press the button [multi- nger chord] to start the auto bass chord, at this
time you can play with multi ngering in the 19 bass button area with chord accompaniment, Press
the button [multi-nger chord] again or [chord o] to end this function.
Comprehensive chord
When rhythm is in service, press the button [comprehensive chord] to start this function, at this time
you can play with single nger chord or multi-nger chord. Press the button again to quit the
function.
All of these three functions are displayed on LCD to lead you to play the keyboard.
Status register
According the playing need, after adjusted the timbre, rhythm, tempo, press the button[memory] or
[memory 1-4] the playing timbre, rhythm, tempo are renewing the corresponding state of the
system.
4. Eect control
Sustain & vibrato
Press the button [sustain] to enter the sustain function,the endnotes played are lengthened.
Press the button [vibrato] to enter the function, the pitch of the notes vibrates within a limited
range.
When sustain & vibrato is in service LCD will display the instruction.
Rising tone & falling tone
Press the button [transposition] to adjust the tone,it is able to adjust to increase 6 grades or reduce
6 grades. Press the button [+] and [-] at the meantime, the transposition turned into 0, LCD display
the pitch for 3 seconds.
Touch response keyboard
This keyboard with touch response function,is start on default when keyboard is turn on,the
volume is depend on the touch strength, press the button [touch response keyboard] again to quit
this function, LCD will display the instruction.
Split
Press the button [split] the keyboard divide into two areas, at this time LCD displays the second
timbre, press the button [+/-] to change the timbre, press
the button [split] again to quit this function.
Double timbre playing
Press the button [double timbre] to play the notes with combinational two timbres, at this time the
timbres displayed is the second one, press the button [+/-] to change the timbre, press the button
[double timbre] again to quit this function.
Tune function
Press the button [+/-] to adjust the tune, the adjustment scope is -99 to 99.
Demo song
30 demo songs for your selection, please see in attachment 3. Press the button [demo] to play the
demo song cyclically. Press the button [+/-] to choose the demo song.
Teaching function
Press the button [single-key] [follow] or [concert] to enter the corresponding teaching mode,LCD
display the corresponding state.
A.Single-key: the note button is pressed to continue the music, whether or not you play the right
note, you will get the right sound. The song still goes on.
B.Follow:the main melody is shielded it seems like karaoke,the song would not stop, if you do not
play the keyboard for three seconds, the main melody will
renew.
C. Concert:only the note pressed correctly, the song would goes on, the song would played
cyclical, press the [single-key] [follow] or [concert] to quit the function.
Recording
Press the button [record] to go into the function, the notes recorded about 110 notes, the notes
playing will be recorded. Neither ngering nor percussion would be recorded. New notes can be
added till the room is full.When recording is under way. press [playback] to play the recorded notes
one by one, LCD display the corresponding state ,when the room is full the LCD will display“full"
for 4 second , press the [record] button again to quit the function.
Rhythm programming
Press the button [program] to go into the programming mode and the corresponding mode
display on LCD.In the programming mode to edit drums into the keyboard, only one drum can be
edit at a time and drums edited should not exceed the maximum number 32. press a key once to
edit an empty beat more than 32 notes LCD will display “full" for 3 second.In programming mode.
press [program] to end this function and get into normal function, at this time corresponding
mode display on LCD.
In programming mode,press [playback] to play the drums edited cyclically, forming a rhythm of
self- edited style,corresponding state displayed on LCD. In this mode you can choose dierent
timbre to play.
5. With USB music player
Volume [+] and [-]:the volume button is pressed to increase the volume or reduce the volume.
Prev.music/ next .music: the prev button or next button is pressed to select prev music or next
music, the pressing on the two buttons are fast-back or fast-forward.
EQ mode:EQ button is pressed every time, the normal mode, jazz mode, classical mode,popular
mode and rock and roll mode is changed in turn.
Playing mode: the button is pressed for the rst time, and the music in the le is played; the button
is pressed for the second time, and the mode is change into the single-cycle mode.The button is
pressed for the third time, and the mode is change into the random playing mode.
Playing:the U disk is learned before the power is on. The playing button is pressed to play the
music. It only support MP3 sound format.
4
B. O uso do adaptador A/C
Use apenas o adaptador A/C KEY POWER para alimentar seu instrumento da rede elétrica A/C.
O método para usar o adaptador CA é colocar uma extremidade na tomada na parte traseira do
teclado e a outra extremidade na tomada da rede elétrica A/C.
C. O uso de portas de terminais externos
Conector externo do pedal de sustentação: este teclado com portas de pedal de sustentação,
conecte o plugue à porta que pode entrar em vigor.
Conector MIDI: esta função usa para saída de áudio e outras instalações conectadas que com
função MIDI IN.
Entrada de linha de áudio: este teclado com função estéreo, suporta telefone, tocador de música
USB, computador ou outro sinal de áudio que o teclado deve tocar.
Primeiro, desligue o teclado, conecte o plugue de áudio na instalação e a outra extremidade no
teclado e depois ligue o teclado.
Entrada de microfone: conecte o plugue do microfone na porta, do que você pode usar enquanto
toca o teclado.
Saída de linha: insira o plugue do alto-falante no soquete [alto-falante] e o efeito de desempenho
será aprimorado.
Saída do fone de ouvido: conecte o plugue do fone de ouvido na porta, para evitar inuenciar
outras pessoas enquanto o teclado é aprendido.
III. A Preparação para tocar
Pressione o botão [botão liga / desliga] e poderá começar a tocar quando o número 120 aparecer
no LCD.
1. Desempenho Básico
Controle de volume
(1) Controle de volume principal: 16 notas no total, 12 notas é o volume de abertura padrão,
pressione o botão [+/-] para aumentar ou diminuir o volume.
(2) Volume do acorde: 10 notas ao todo, controlando o volume do ritmo do acorde.
(3) Volume do ritmo: 10 notas no total, ajuste o volume da música de percussão do teclado.
(4) Pressione o botão [+/-] sem afrouxar por 2 segundos, você pode aumentar ou diminuir o
volume rapidamente.Pressione o botão [+/-] ao mesmo tempo por 2 segundos, o volume restaura-
rá os valores padrão .
(5) Seleção de timbre: no modo usual, pressione o botão [timbre] e, em seguida, você pode
escolher o timbre, 300 timbres para seleção. O piano número 000 é o timbre padrão de abertura.
Pressione o botão [+/-] ou 3 números para escolher o timbre.
(6 music Música de percussão do teclado: pressione o botão [música de percussão do teclado] e,
neste momento, o teclado se transforma na música de percussão do teclado, cada par deles tem
uma relação correspondente.
2 .Auto Acompanhamento
(1) Seleção de ritmos
Ao todo 300 ritmos para escolher, no modo usual, pressione o botão [timbre] para iniciar esta
função, o número 00 é o ritmo de abertura padrão. Pressione a tecla numérica 3 ou [+/-] para
escolher o ritmo.
(2) Os ritmos começam e param
Pressione o botão [start / stop] para iniciar esta função, a batida com a luz, pressione o botão
novamente para sair desta função.
(3) Preenchimento, prelúdio e adiamento
No modo de reprodução de ritmo, pressione o botão [ll-in] para reproduzir o ritmo, após o
ritmo, pressione o botão [prelude / postlude] para entrar no modo prelúdio, depois de
o modo de reprodução prelúdio entrará no modo de reprodução adiado automaticamente.
(4) função de sincronização
Pressione o botão [sync] para iniciar a função de sincronização; nesse momento, pressione o botão
19 graves, o ritmo será reproduzido e saia da função de sincronização ao mesmo tempo.
(5) função Tempo
Pressione o botão [metrônomo] para iniciar o metrônomo com um som "dida", tocando com um
efeito de andamento. Pressione o botão continuamente, 1/4, 2/4, 3/4, 4/4 e pare, quatro metrôno-
mos para seleção , pressione o botão que o LCD exibe "normal" e você pode sair da função.
Conguração de tempo
120 é o tempo padrão de abertura, pressione o botão [+/-] para ajustar o tempo, o
o escopo de ajuste está entre 30 e 240.
3. Acorde de graves automático
Acorde baixo de um dedo
Quando o ritmo estiver em serviço, pressione o botão [acorde com um dedo] para iniciar a função
correspondente de acordes de acompanhamento automático; nesse momento, você pode tocar
com um toque na área de 19 graves com acompanhamento de acordes, pressione o botão
novamente para sair da função. Quando o ritmo não está em serviço. pressione o botão [acorde
com um dedo] para iniciar a função de acorde com um dedo; neste momento você pode tocar
com acorde com um dedo, pressione o botão novamente para sair da função.
Acorde com vários dedos.
Quando o ritmo está em serviço. pressione o botão [acorde de vários dedos] para iniciar o acorde
de graves automáticos; neste momento, você pode tocar com vários dedos na área de 19 graves
com acompanhamento de acordes. Pressione o botão [acorde de vários dedos] novamente ou
[acorde desligado] para nalizar esta função.
Acorde abrangente
Quando o ritmo estiver em serviço, pressione o botão [acorde abrangente] para iniciar esta função.
Nesse momento, você pode tocar com um acorde de dedo único ou com vários dedos. Pressione o
botão novamente para sair da função.
Todas essas três funções são exibidas no LCD para que você toque o teclado.
Registro de status
De acordo com a necessidade de reprodução, após ajustar o timbre, ritmo, andamento, pressione o
botão [memory] ou [memory 1-4] o timbre, ritmo e andamento da reprodução renovando o
estado correspondente do sistema.
4. Controle de efeito
Sustain & vibrato
Pressione o botão [sustain] para entrar na função de sustentação, as notas nais tocadas são
alongadas.
Pressione o botão [vibrato] para entrar na função, o tom das notas vibra dentro de um intervalo
limitado.
Quando o sustain e o vibrato estão em serviço, o LCD exibirá a instrução.
Tom crescente e tom decrescente
Pressione o botão [transposição] para ajustar o tom, é possível ajustar para aumentar 6 notas ou
reduzir 6 notas. Pressione o botão [+] e [-] enquanto isso, a transposição se transforma em 0, o LCD
exibe a anação por 3 segundos.
Teclado de resposta ao toque
Este teclado com função de resposta ao toque é iniciado por padrão quando o teclado é ligado, o
volume depende da força do toque, pressione o botão [teclado de resposta ao toque] novamente
para sair desta função, o LCD exibirá as instruções.
Dividido
Pressione o botão [dividir], o teclado se divide em duas áreas; nesse momento, o LCD exibe o
segundo timbre, pressione o botão [+/-] para alterar o timbre, pressione
o botão [dividir] novamente para sair desta função.
Timbre duplo
Pressione o botão [timbre duplo] para tocar as notas com dois timbres combinacionais; neste
momento os timbres exibidos são o segundo, pressione o botão [+/-] para alterar o timbre,
pressione o botão [timbre duplo] novamente para sair esta função.
Função de sintonia
Pressione o botão [+/-] para ajustar a melodia, o alcance do ajuste é de -99 a 99.
Música demo
30 músicas demo para sua seleção, veja no anexo 3. Pressione o botão [demo] para reproduzir a
música demo ciclicamente. Pressione o botão [+/-] para escolher a música demo.
Função de ensino
Pressione o botão [tecla única] [seguir] ou [concerto] para entrar no modo de ensino correspon-
dente; o display LCD exibe o estado correspondente.
A. Tecla única: o botão de nota é pressionado para continuar a música, se você tocar ou não a nota
certa, obterá o som certo. A música ainda continua.
B.Siga: a melodia principal é protegida, parece um karaokê, a música não para, se você não tocar o
teclado por três segundos, a melodia principal será
renovar.
C. Concerto: apenas a nota pressionada corretamente, a música continua, a música toca cíclica,
pressione [tecla única] [seguir] ou [concerto] para sair da função.
Gravação
Pressione o botão [gravar] para entrar na função, as notas gravadas em cerca de 110 notas e as
notas reproduzidas. Nem o dedilhado nem a percussão seriam gravados. Novas notas podem ser
adicionadas até a sala car cheia. Quando a gravação estiver em andamento. pressione [playback]
para reproduzir as notas gravadas uma a uma, o LCD exibirá o estado correspondente; quando a
sala estiver cheia, o LCD exibirá “full” por 4 segundos; pressione o botão [record] novamente para
sair da função.
Programação de ritmo
Pressione o botão [program] para entrar no modo de programação e no modo correspondente
exibido no LCD.No modo de programação para editar bateria no teclado, apenas uma bateria pode
ser editada por vez e a bateria editada não deve exceder o número máximo 32 Pressione uma tecla
uma vez para editar uma batida vazia com mais de 32 notas. O LCD exibirá "cheio" por 3 segundos.
No modo de programação.
pressione [programa] para nalizar esta função e entrar na função normal, neste momento o modo
correspondente é exibido no LCD.
No modo de programação, pressione [playback] para tocar a bateria editada ciclicamente,
formando um ritmo de estilo auto-editado, o estado correspondente exibido no LCD. Neste modo,
você pode escolher diferentes timbres para tocar.
5. Com leitor de música USB
Volume [+] e [-]: o botão de volume é pressionado para aumentar ou reduzir o volume.
Música anterior / música seguinte: o botão anterior ou o botão seguinte é pressionado para
selecionar a música anterior ou a próxima música; a pressão nos dois botões é retroceder ou
avançar rapidamente.
Modo EQ: O botão EQ é pressionado toda vez, o modo normal, jazz, clássico, popular e rock and
roll são alterados.
Modo de reprodução: o botão é pressionado pela primeira vez e a música no arquivo é reproduzi-
da; o botão é pressionado pela segunda vez e o modo muda para o modo de ciclo único. O botão é
pressionado pela terceira vez e o modo muda para o modo de reprodução aleatória.
Em reprodução: o disco U é aprendido antes de ligar. O botão de reprodução é pressionado para
reproduzir a música. Ele suporta apenas o formato de som MP3.
B. The usage of A/C adapter
Use only the YONGMEI AC adapter to power your instrument from AC mains. The method to use
the AC adapter is to put one end into the jack at the back of the keyboard and the other end into
the outlet of AC mains.
C. The usage of external terminal ports
External sustain pedal jack: this keyboard with sustain pedal ports, plug the plug into the port it
can take eect.
MIDI connector: this function uses for audio output and other connected installations that have a
MIDI IN function.
Audio line input: this keyboard with stereo function, it support phone, USB music player, computer
or other audio signal input the keyboard to play.
Firstly turn o the keyboard, plug the audio plug into the facility and the other end plug into the
keyboard and then turn on the keyboard.
Microphone input: Plug the microphone plug into the port, than you can use while playing the
keyboard.
Line out:Insert the plug of the speaker into [speaker] socket, and the performance eect will be
enhanced.
Earphone output:Plug the earphone plug into the port, in order to avoid inuencing other people
while the keyboard is learned.
III. The Function Operation
Press the button [power switch] then you can start playing when the number 120 appears on LCD.
1. Basic performance
Volume controlling
(1)Master volume control:16 grades in all, 12 grades is the default opening volume, press the
button [+/-] to turn up or turn down the volume.
(2)Chord volume:10 grades in all,controlling the volume of chord rhythm.
(3)Rhythm volume:10 grades in all, adjust the volume of keyboard percussion music.
(4)Press the button [+/-] no loosen for 2 seconds, you can turn up or turn down the volume
quickly.Press the button [+/-] at the same time for 2 seconds,the volume restore the default values.
(5)Timbre selection: in usual mode, press the button [timbre] then you can choose the timbre,300
timbres for selection. The number 000 piano is the opening default timbre.Press the button [+/-] or
3 numbers to choose the timbre.
(6）Keyboard percussion music:press the button [keyboard percussion music] at this time the
keyboard turn into the keyboard percussion music,each pair of them has corresponding relation.
Press the button again to quit the function.
2. Auto accompaniment
(1)Rhythms selection
300 rhythms in all to choose, in usual mode, press the button [timbre] to start this function,the
number 00 is the default opening rhythm. Press 3 number key or [+/-] to choose the rhythm.
(2) Rhythms start and stop
Press the button [start/stop] to start this function, the beat with the light, press the button again to
quit this function.
(3) Fill-in,prelude and postlude
In rhythm playing mode,press the button [ll-in] to play the rhythm , after the
rhythm press the button [prelude/postlude] to enter the prelude mode, after tho
prelude playing mode will go into the postlude playing mode automatically.
(4) Sync function
Press the button [sync] to start the sync function, at this time press the 19 bass button, the rhythm
will be played, and quit the sync function at the same time.
(5) Tempo function
Press the button [metronome] to start the metronome with a sound“dida", playing with a tempo
eect. Press the button continuously, 1/4, 2/4, 3/4, 4/4 and stop, four metronome for selection,
press the button the LCD displays " normal" then you can quit the function.
Tempo setting
120 is the opening default tempo, press the button [+/-] to adjust the tempo, the
adjustment scope is between 30 to 240.
3. Auto bass chord
Single nger bass chord
When rhythm is in service, press the button [single nger chord] to start corresponding automatic
accompaniment chord function,at this time you can play with single ngering in the 19 bass button
area with chord accompaniment, press the button again to quit the function. When the rhythm is not
in service. press the button [single nger chord] to start the single nger chord function, at this time
you can play with single nger chord, press the button again to quit the function.
Multi-nger chord
When rhythm is in service. press the button [multi- nger chord] to start the auto bass chord, at this
time you can play with multi ngering in the 19 bass button area with chord accompaniment, Press
the button [multi-nger chord] again or [chord o] to end this function.
Comprehensive chord
When rhythm is in service, press the button [comprehensive chord] to start this function, at this time
you can play with single nger chord or multi-nger chord. Press the button again to quit the
function.
All of these three functions are displayed on LCD to lead you to play the keyboard.
Status register
According the playing need, after adjusted the timbre, rhythm, tempo, press the button[memory] or
[memory 1-4] the playing timbre, rhythm, tempo are renewing the corresponding state of the
system.
4. Eect control
Sustain & vibrato
Press the button [sustain] to enter the sustain function,the endnotes played are lengthened.
Press the button [vibrato] to enter the function, the pitch of the notes vibrates within a limited
range.
When sustain & vibrato is in service LCD will display the instruction.
Rising tone & falling tone
Press the button [transposition] to adjust the tone,it is able to adjust to increase 6 grades or reduce
6 grades. Press the button [+] and [-] at the meantime, the transposition turned into 0, LCD display
the pitch for 3 seconds.
Touch response keyboard
This keyboard with touch response function,is start on default when keyboard is turn on,the
volume is depend on the touch strength, press the button [touch response keyboard] again to quit
this function, LCD will display the instruction.
Split
Press the button [split] the keyboard divide into two areas, at this time LCD displays the second
timbre, press the button [+/-] to change the timbre, press
the button [split] again to quit this function.
Double timbre playing
Press the button [double timbre] to play the notes with combinational two timbres, at this time the
timbres displayed is the second one, press the button [+/-] to change the timbre, press the button
[double timbre] again to quit this function.
Tune function
Press the button [+/-] to adjust the tune, the adjustment scope is -99 to 99.
Demo song
30 demo songs for your selection, please see in attachment 3. Press the button [demo] to play the
demo song cyclically. Press the button [+/-] to choose the demo song.
Teaching function
Press the button [single-key] [follow] or [concert] to enter the corresponding teaching mode,LCD
display the corresponding state.
A.Single-key: the note button is pressed to continue the music, whether or not you play the right
note, you will get the right sound. The song still goes on.
B.Follow:the main melody is shielded it seems like karaoke,the song would not stop, if you do not
play the keyboard for three seconds, the main melody will
renew.
C. Concert:only the note pressed correctly, the song would goes on, the song would played
cyclical, press the [single-key] [follow] or [concert] to quit the function.
Recording
Press the button [record] to go into the function, the notes recorded about 110 notes, the notes
playing will be recorded. Neither ngering nor percussion would be recorded. New notes can be
added till the room is full.When recording is under way. press [playback] to play the recorded notes
one by one, LCD display the corresponding state ,when the room is full the LCD will display“full"
for 4 second , press the [record] button again to quit the function.
Rhythm programming
Press the button [program] to go into the programming mode and the corresponding mode
display on LCD.In the programming mode to edit drums into the keyboard, only one drum can be
edit at a time and drums edited should not exceed the maximum number 32. press a key once to
edit an empty beat more than 32 notes LCD will display “full" for 3 second.In programming mode.
press [program] to end this function and get into normal function, at this time corresponding
mode display on LCD.
In programming mode,press [playback] to play the drums edited cyclically, forming a rhythm of
self- edited style,corresponding state displayed on LCD. In this mode you can choose dierent
timbre to play.
5. With USB music player
Volume [+] and [-]:the volume button is pressed to increase the volume or reduce the volume.
Prev.music/ next .music: the prev button or next button is pressed to select prev music or next
music, the pressing on the two buttons are fast-back or fast-forward.
EQ mode:EQ button is pressed every time, the normal mode, jazz mode, classical mode,popular
mode and rock and roll mode is changed in turn.
Playing mode: the button is pressed for the rst time, and the music in the le is played; the button
is pressed for the second time, and the mode is change into the single-cycle mode.The button is
pressed for the third time, and the mode is change into the random playing mode.
Playing:the U disk is learned before the power is on. The playing button is pressed to play the
music. It only support MP3 sound format.
5
B. O uso do adaptador A/C
Use apenas o adaptador A/C KEY POWER para alimentar seu instrumento da rede elétrica A/C.
O método para usar o adaptador CA é colocar uma extremidade na tomada na parte traseira do
teclado e a outra extremidade na tomada da rede elétrica A/C.
C. O uso de portas de terminais externos
Conector externo do pedal de sustentação: este teclado com portas de pedal de sustentação,
conecte o plugue à porta que pode entrar em vigor.
Conector MIDI: esta função usa para saída de áudio e outras instalações conectadas que com
função MIDI IN.
Entrada de linha de áudio: este teclado com função estéreo, suporta telefone, tocador de música
USB, computador ou outro sinal de áudio que o teclado deve tocar.
Primeiro, desligue o teclado, conecte o plugue de áudio na instalação e a outra extremidade no
teclado e depois ligue o teclado.
Entrada de microfone: conecte o plugue do microfone na porta, do que você pode usar enquanto
toca o teclado.
Saída de linha: insira o plugue do alto-falante no soquete [alto-falante] e o efeito de desempenho
será aprimorado.
Saída do fone de ouvido: conecte o plugue do fone de ouvido na porta, para evitar inuenciar
outras pessoas enquanto o teclado é aprendido.
III. A Preparação para tocar
Pressione o botão [botão liga / desliga] e poderá começar a tocar quando o número 120 aparecer
no LCD.
1. Desempenho Básico
Controle de volume
(1) Controle de volume principal: 16 notas no total, 12 notas é o volume de abertura padrão,
pressione o botão [+/-] para aumentar ou diminuir o volume.
(2) Volume do acorde: 10 notas ao todo, controlando o volume do ritmo do acorde.
(3) Volume do ritmo: 10 notas no total, ajuste o volume da música de percussão do teclado.
(4) Pressione o botão [+/-] sem afrouxar por 2 segundos, você pode aumentar ou diminuir o
volume rapidamente.Pressione o botão [+/-] ao mesmo tempo por 2 segundos, o volume restaura-
rá os valores padrão .
(5) Seleção de timbre: no modo usual, pressione o botão [timbre] e, em seguida, você pode
escolher o timbre, 300 timbres para seleção. O piano número 000 é o timbre padrão de abertura.
Pressione o botão [+/-] ou 3 números para escolher o timbre.
(6 music Música de percussão do teclado: pressione o botão [música de percussão do teclado] e,
neste momento, o teclado se transforma na música de percussão do teclado, cada par deles tem
uma relação correspondente.
2 .Auto Acompanhamento
(1) Seleção de ritmos
Ao todo 300 ritmos para escolher, no modo usual, pressione o botão [timbre] para iniciar esta
função, o número 00 é o ritmo de abertura padrão. Pressione a tecla numérica 3 ou [+/-] para
escolher o ritmo.
(2) Os ritmos começam e param
Pressione o botão [start / stop] para iniciar esta função, a batida com a luz, pressione o botão
novamente para sair desta função.
(3) Preenchimento, prelúdio e adiamento
No modo de reprodução de ritmo, pressione o botão [ll-in] para reproduzir o ritmo, após o
ritmo, pressione o botão [prelude / postlude] para entrar no modo prelúdio, depois de
o modo de reprodução prelúdio entrará no modo de reprodução adiado automaticamente.
(4) função de sincronização
Pressione o botão [sync] para iniciar a função de sincronização; nesse momento, pressione o botão
19 graves, o ritmo será reproduzido e saia da função de sincronização ao mesmo tempo.
(5) função Tempo
Pressione o botão [metrônomo] para iniciar o metrônomo com um som "dida", tocando com um
efeito de andamento. Pressione o botão continuamente, 1/4, 2/4, 3/4, 4/4 e pare, quatro metrôno-
mos para seleção , pressione o botão que o LCD exibe "normal" e você pode sair da função.
Conguração de tempo
120 é o tempo padrão de abertura, pressione o botão [+/-] para ajustar o tempo, o
o escopo de ajuste está entre 30 e 240.
3. Acorde de graves automático
Acorde baixo de um dedo
Quando o ritmo estiver em serviço, pressione o botão [acorde com um dedo] para iniciar a função
correspondente de acordes de acompanhamento automático; nesse momento, você pode tocar
com um toque na área de 19 graves com acompanhamento de acordes, pressione o botão
novamente para sair da função. Quando o ritmo não está em serviço. pressione o botão [acorde
com um dedo] para iniciar a função de acorde com um dedo; neste momento você pode tocar
com acorde com um dedo, pressione o botão novamente para sair da função.
Acorde com vários dedos.
Quando o ritmo está em serviço. pressione o botão [acorde de vários dedos] para iniciar o acorde
de graves automáticos; neste momento, você pode tocar com vários dedos na área de 19 graves
com acompanhamento de acordes. Pressione o botão [acorde de vários dedos] novamente ou
[acorde desligado] para nalizar esta função.
Acorde abrangente
Quando o ritmo estiver em serviço, pressione o botão [acorde abrangente] para iniciar esta função.
Nesse momento, você pode tocar com um acorde de dedo único ou com vários dedos. Pressione o
botão novamente para sair da função.
Todas essas três funções são exibidas no LCD para que você toque o teclado.
Registro de status
De acordo com a necessidade de reprodução, após ajustar o timbre, ritmo, andamento, pressione o
botão [memory] ou [memory 1-4] o timbre, ritmo e andamento da reprodução renovando o
estado correspondente do sistema.
4. Controle de efeito
Sustain & vibrato
Pressione o botão [sustain] para entrar na função de sustentação, as notas nais tocadas são
alongadas.
Pressione o botão [vibrato] para entrar na função, o tom das notas vibra dentro de um intervalo
limitado.
Quando o sustain e o vibrato estão em serviço, o LCD exibirá a instrução.
Tom crescente e tom decrescente
Pressione o botão [transposição] para ajustar o tom, é possível ajustar para aumentar 6 notas ou
reduzir 6 notas. Pressione o botão [+] e [-] enquanto isso, a transposição se transforma em 0, o LCD
exibe a anação por 3 segundos.
Teclado de resposta ao toque
Este teclado com função de resposta ao toque é iniciado por padrão quando o teclado é ligado, o
volume depende da força do toque, pressione o botão [teclado de resposta ao toque] novamente
para sair desta função, o LCD exibirá as instruções.
Dividido
Pressione o botão [dividir], o teclado se divide em duas áreas; nesse momento, o LCD exibe o
segundo timbre, pressione o botão [+/-] para alterar o timbre, pressione
o botão [dividir] novamente para sair desta função.
Timbre duplo
Pressione o botão [timbre duplo] para tocar as notas com dois timbres combinacionais; neste
momento os timbres exibidos são o segundo, pressione o botão [+/-] para alterar o timbre,
pressione o botão [timbre duplo] novamente para sair esta função.
Função de sintonia
Pressione o botão [+/-] para ajustar a melodia, o alcance do ajuste é de -99 a 99.
Música demo
30 músicas demo para sua seleção, veja no anexo 3. Pressione o botão [demo] para reproduzir a
música demo ciclicamente. Pressione o botão [+/-] para escolher a música demo.
Função de ensino
Pressione o botão [tecla única] [seguir] ou [concerto] para entrar no modo de ensino correspon-
dente; o display LCD exibe o estado correspondente.
A. Tecla única: o botão de nota é pressionado para continuar a música, se você tocar ou não a nota
certa, obterá o som certo. A música ainda continua.
B.Siga: a melodia principal é protegida, parece um karaokê, a música não para, se você não tocar o
teclado por três segundos, a melodia principal será
renovar.
C. Concerto: apenas a nota pressionada corretamente, a música continua, a música toca cíclica,
pressione [tecla única] [seguir] ou [concerto] para sair da função.
Gravação
Pressione o botão [gravar] para entrar na função, as notas gravadas em cerca de 110 notas e as
notas reproduzidas. Nem o dedilhado nem a percussão seriam gravados. Novas notas podem ser
adicionadas até a sala car cheia. Quando a gravação estiver em andamento. pressione [playback]
para reproduzir as notas gravadas uma a uma, o LCD exibirá o estado correspondente; quando a
sala estiver cheia, o LCD exibirá “full” por 4 segundos; pressione o botão [record] novamente para
sair da função.
Programação de ritmo
Pressione o botão [program] para entrar no modo de programação e no modo correspondente
exibido no LCD.No modo de programação para editar bateria no teclado, apenas uma bateria pode
ser editada por vez e a bateria editada não deve exceder o número máximo 32 Pressione uma tecla
uma vez para editar uma batida vazia com mais de 32 notas. O LCD exibirá "cheio" por 3 segundos.
No modo de programação.
pressione [programa] para nalizar esta função e entrar na função normal, neste momento o modo
correspondente é exibido no LCD.
No modo de programação, pressione [playback] para tocar a bateria editada ciclicamente,
formando um ritmo de estilo auto-editado, o estado correspondente exibido no LCD. Neste modo,
você pode escolher diferentes timbres para tocar.
5. Com leitor de música USB
Volume [+] e [-]: o botão de volume é pressionado para aumentar ou reduzir o volume.
Música anterior / música seguinte: o botão anterior ou o botão seguinte é pressionado para
selecionar a música anterior ou a próxima música; a pressão nos dois botões é retroceder ou
avançar rapidamente.
Modo EQ: O botão EQ é pressionado toda vez, o modo normal, jazz, clássico, popular e rock and
roll são alterados.
Modo de reprodução: o botão é pressionado pela primeira vez e a música no arquivo é reproduzi-
da; o botão é pressionado pela segunda vez e o modo muda para o modo de ciclo único. O botão é
pressionado pela terceira vez e o modo muda para o modo de reprodução aleatória.
Em reprodução: o disco U é aprendido antes de ligar. O botão de reprodução é pressionado para
reproduzir a música. Ele suporta apenas o formato de som MP3.
B. The usage of A/C adapter
Use only the YONGMEI AC adapter to power your instrument from AC mains. The method to use
the AC adapter is to put one end into the jack at the back of the keyboard and the other end into
the outlet of AC mains.
C. The usage of external terminal ports
External sustain pedal jack: this keyboard with sustain pedal ports, plug the plug into the port it
can take eect.
MIDI connector: this function uses for audio output and other connected installations that have a
MIDI IN function.
Audio line input: this keyboard with stereo function, it support phone, USB music player, computer
or other audio signal input the keyboard to play.
Firstly turn o the keyboard, plug the audio plug into the facility and the other end plug into the
keyboard and then turn on the keyboard.
Microphone input: Plug the microphone plug into the port, than you can use while playing the
keyboard.
Line out:Insert the plug of the speaker into [speaker] socket, and the performance eect will be
enhanced.
Earphone output:Plug the earphone plug into the port, in order to avoid inuencing other people
while the keyboard is learned.
III. The Function Operation
Press the button [power switch] then you can start playing when the number 120 appears on LCD.
1. Basic performance
Volume controlling
(1)Master volume control:16 grades in all, 12 grades is the default opening volume, press the
button [+/-] to turn up or turn down the volume.
(2)Chord volume:10 grades in all,controlling the volume of chord rhythm.
(3)Rhythm volume:10 grades in all, adjust the volume of keyboard percussion music.
(4)Press the button [+/-] no loosen for 2 seconds, you can turn up or turn down the volume
quickly.Press the button [+/-] at the same time for 2 seconds,the volume restore the default values.
(5)Timbre selection: in usual mode, press the button [timbre] then you can choose the timbre,300
timbres for selection. The number 000 piano is the opening default timbre.Press the button [+/-] or
3 numbers to choose the timbre.
(6）Keyboard percussion music:press the button [keyboard percussion music] at this time the
keyboard turn into the keyboard percussion music,each pair of them has corresponding relation.
Press the button again to quit the function.
2. Auto accompaniment
(1)Rhythms selection
300 rhythms in all to choose, in usual mode, press the button [timbre] to start this function,the
number 00 is the default opening rhythm. Press 3 number key or [+/-] to choose the rhythm.
(2) Rhythms start and stop
Press the button [start/stop] to start this function, the beat with the light, press the button again to
quit this function.
(3) Fill-in,prelude and postlude
In rhythm playing mode,press the button [ll-in] to play the rhythm , after the
rhythm press the button [prelude/postlude] to enter the prelude mode, after tho
prelude playing mode will go into the postlude playing mode automatically.
(4) Sync function
Press the button [sync] to start the sync function, at this time press the 19 bass button, the rhythm
will be played, and quit the sync function at the same time.
(5) Tempo function
Press the button [metronome] to start the metronome with a sound“dida", playing with a tempo
eect. Press the button continuously, 1/4, 2/4, 3/4, 4/4 and stop, four metronome for selection,
press the button the LCD displays " normal" then you can quit the function.
Tempo setting
120 is the opening default tempo, press the button [+/-] to adjust the tempo, the
adjustment scope is between 30 to 240.
3. Auto bass chord
Single nger bass chord
When rhythm is in service, press the button [single nger chord] to start corresponding automatic
accompaniment chord function,at this time you can play with single ngering in the 19 bass button
area with chord accompaniment, press the button again to quit the function. When the rhythm is not
in service. press the button [single nger chord] to start the single nger chord function, at this time
you can play with single nger chord, press the button again to quit the function.
Multi-nger chord
When rhythm is in service. press the button [multi- nger chord] to start the auto bass chord, at this
time you can play with multi ngering in the 19 bass button area with chord accompaniment, Press
the button [multi-nger chord] again or [chord o] to end this function.
Comprehensive chord
When rhythm is in service, press the button [comprehensive chord] to start this function, at this time
you can play with single nger chord or multi-nger chord. Press the button again to quit the
function.
All of these three functions are displayed on LCD to lead you to play the keyboard.
Status register
According the playing need, after adjusted the timbre, rhythm, tempo, press the button[memory] or
[memory 1-4] the playing timbre, rhythm, tempo are renewing the corresponding state of the
system.
4. Eect control
Sustain & vibrato
Press the button [sustain] to enter the sustain function,the endnotes played are lengthened.
Press the button [vibrato] to enter the function, the pitch of the notes vibrates within a limited
range.
When sustain & vibrato is in service LCD will display the instruction.
Rising tone & falling tone
Press the button [transposition] to adjust the tone,it is able to adjust to increase 6 grades or reduce
6 grades. Press the button [+] and [-] at the meantime, the transposition turned into 0, LCD display
the pitch for 3 seconds.
Touch response keyboard
This keyboard with touch response function,is start on default when keyboard is turn on,the
volume is depend on the touch strength, press the button [touch response keyboard] again to quit
this function, LCD will display the instruction.
Split
Press the button [split] the keyboard divide into two areas, at this time LCD displays the second
timbre, press the button [+/-] to change the timbre, press
the button [split] again to quit this function.
Double timbre playing
Press the button [double timbre] to play the notes with combinational two timbres, at this time the
timbres displayed is the second one, press the button [+/-] to change the timbre, press the button
[double timbre] again to quit this function.
Tune function
Press the button [+/-] to adjust the tune, the adjustment scope is -99 to 99.
Demo song
30 demo songs for your selection, please see in attachment 3. Press the button [demo] to play the
demo song cyclically. Press the button [+/-] to choose the demo song.
Teaching function
Press the button [single-key] [follow] or [concert] to enter the corresponding teaching mode,LCD
display the corresponding state.
A.Single-key: the note button is pressed to continue the music, whether or not you play the right
note, you will get the right sound. The song still goes on.
B.Follow:the main melody is shielded it seems like karaoke,the song would not stop, if you do not
play the keyboard for three seconds, the main melody will
renew.
C. Concert:only the note pressed correctly, the song would goes on, the song would played
cyclical, press the [single-key] [follow] or [concert] to quit the function.
Recording
Press the button [record] to go into the function, the notes recorded about 110 notes, the notes
playing will be recorded. Neither ngering nor percussion would be recorded. New notes can be
added till the room is full.When recording is under way. press [playback] to play the recorded notes
one by one, LCD display the corresponding state ,when the room is full the LCD will display“full"
for 4 second , press the [record] button again to quit the function.
Rhythm programming
Press the button [program] to go into the programming mode and the corresponding mode
display on LCD.In the programming mode to edit drums into the keyboard, only one drum can be
edit at a time and drums edited should not exceed the maximum number 32. press a key once to
edit an empty beat more than 32 notes LCD will display “full" for 3 second.In programming mode.
press [program] to end this function and get into normal function, at this time corresponding
mode display on LCD.
In programming mode,press [playback] to play the drums edited cyclically, forming a rhythm of
self- edited style,corresponding state displayed on LCD. In this mode you can choose dierent
timbre to play.
5. With USB music player
Volume [+] and [-]:the volume button is pressed to increase the volume or reduce the volume.
Prev.music/ next .music: the prev button or next button is pressed to select prev music or next
music, the pressing on the two buttons are fast-back or fast-forward.
EQ mode:EQ button is pressed every time, the normal mode, jazz mode, classical mode,popular
mode and rock and roll mode is changed in turn.
Playing mode: the button is pressed for the rst time, and the music in the le is played; the button
is pressed for the second time, and the mode is change into the single-cycle mode.The button is
pressed for the third time, and the mode is change into the random playing mode.
Playing:the U disk is learned before the power is on. The playing button is pressed to play the
music. It only support MP3 sound format.
6
B. O uso do adaptador A/C
Use apenas o adaptador A/C KEY POWER para alimentar seu instrumento da rede elétrica A/C.
O método para usar o adaptador CA é colocar uma extremidade na tomada na parte traseira do
teclado e a outra extremidade na tomada da rede elétrica A/C.
C. O uso de portas de terminais externos
Conector externo do pedal de sustentação: este teclado com portas de pedal de sustentação,
conecte o plugue à porta que pode entrar em vigor.
Conector MIDI: esta função usa para saída de áudio e outras instalações conectadas que com
função MIDI IN.
Entrada de linha de áudio: este teclado com função estéreo, suporta telefone, tocador de música
USB, computador ou outro sinal de áudio que o teclado deve tocar.
Primeiro, desligue o teclado, conecte o plugue de áudio na instalação e a outra extremidade no
teclado e depois ligue o teclado.
Entrada de microfone: conecte o plugue do microfone na porta, do que você pode usar enquanto
toca o teclado.
Saída de linha: insira o plugue do alto-falante no soquete [alto-falante] e o efeito de desempenho
será aprimorado.
Saída do fone de ouvido: conecte o plugue do fone de ouvido na porta, para evitar inuenciar
outras pessoas enquanto o teclado é aprendido.
III. A Preparação para tocar
Pressione o botão [botão liga / desliga] e poderá começar a tocar quando o número 120 aparecer
no LCD.
1. Desempenho Básico
Controle de volume
(1) Controle de volume principal: 16 notas no total, 12 notas é o volume de abertura padrão,
pressione o botão [+/-] para aumentar ou diminuir o volume.
(2) Volume do acorde: 10 notas ao todo, controlando o volume do ritmo do acorde.
(3) Volume do ritmo: 10 notas no total, ajuste o volume da música de percussão do teclado.
(4) Pressione o botão [+/-] sem afrouxar por 2 segundos, você pode aumentar ou diminuir o
volume rapidamente.Pressione o botão [+/-] ao mesmo tempo por 2 segundos, o volume restaura-
rá os valores padrão .
(5) Seleção de timbre: no modo usual, pressione o botão [timbre] e, em seguida, você pode
escolher o timbre, 300 timbres para seleção. O piano número 000 é o timbre padrão de abertura.
Pressione o botão [+/-] ou 3 números para escolher o timbre.
(6 music Música de percussão do teclado: pressione o botão [música de percussão do teclado] e,
neste momento, o teclado se transforma na música de percussão do teclado, cada par deles tem
uma relação correspondente.
2 .Auto Acompanhamento
(1) Seleção de ritmos
Ao todo 300 ritmos para escolher, no modo usual, pressione o botão [timbre] para iniciar esta
função, o número 00 é o ritmo de abertura padrão. Pressione a tecla numérica 3 ou [+/-] para
escolher o ritmo.
(2) Os ritmos começam e param
Pressione o botão [start / stop] para iniciar esta função, a batida com a luz, pressione o botão
novamente para sair desta função.
(3) Preenchimento, prelúdio e adiamento
No modo de reprodução de ritmo, pressione o botão [ll-in] para reproduzir o ritmo, após o
ritmo, pressione o botão [prelude / postlude] para entrar no modo prelúdio, depois de
o modo de reprodução prelúdio entrará no modo de reprodução adiado automaticamente.
(4) função de sincronização
Pressione o botão [sync] para iniciar a função de sincronização; nesse momento, pressione o botão
19 graves, o ritmo será reproduzido e saia da função de sincronização ao mesmo tempo.
(5) função Tempo
Pressione o botão [metrônomo] para iniciar o metrônomo com um som "dida", tocando com um
efeito de andamento. Pressione o botão continuamente, 1/4, 2/4, 3/4, 4/4 e pare, quatro metrôno-
mos para seleção , pressione o botão que o LCD exibe "normal" e você pode sair da função.
Conguração de tempo
120 é o tempo padrão de abertura, pressione o botão [+/-] para ajustar o tempo, o
o escopo de ajuste está entre 30 e 240.
3. Acorde de graves automático
Acorde baixo de um dedo
Quando o ritmo estiver em serviço, pressione o botão [acorde com um dedo] para iniciar a função
correspondente de acordes de acompanhamento automático; nesse momento, você pode tocar
com um toque na área de 19 graves com acompanhamento de acordes, pressione o botão
novamente para sair da função. Quando o ritmo não está em serviço. pressione o botão [acorde
com um dedo] para iniciar a função de acorde com um dedo; neste momento você pode tocar
com acorde com um dedo, pressione o botão novamente para sair da função.
Acorde com vários dedos.
Quando o ritmo está em serviço. pressione o botão [acorde de vários dedos] para iniciar o acorde
de graves automáticos; neste momento, você pode tocar com vários dedos na área de 19 graves
com acompanhamento de acordes. Pressione o botão [acorde de vários dedos] novamente ou
[acorde desligado] para nalizar esta função.
Acorde abrangente
Quando o ritmo estiver em serviço, pressione o botão [acorde abrangente] para iniciar esta função.
Nesse momento, você pode tocar com um acorde de dedo único ou com vários dedos. Pressione o
botão novamente para sair da função.
Todas essas três funções são exibidas no LCD para que você toque o teclado.
Registro de status
De acordo com a necessidade de reprodução, após ajustar o timbre, ritmo, andamento, pressione o
botão [memory] ou [memory 1-4] o timbre, ritmo e andamento da reprodução renovando o
estado correspondente do sistema.
4. Controle de efeito
Sustain & vibrato
Pressione o botão [sustain] para entrar na função de sustentação, as notas nais tocadas são
alongadas.
Pressione o botão [vibrato] para entrar na função, o tom das notas vibra dentro de um intervalo
limitado.
Quando o sustain e o vibrato estão em serviço, o LCD exibirá a instrução.
Tom crescente e tom decrescente
Pressione o botão [transposição] para ajustar o tom, é possível ajustar para aumentar 6 notas ou
reduzir 6 notas. Pressione o botão [+] e [-] enquanto isso, a transposição se transforma em 0, o LCD
exibe a anação por 3 segundos.
Teclado de resposta ao toque
Este teclado com função de resposta ao toque é iniciado por padrão quando o teclado é ligado, o
volume depende da força do toque, pressione o botão [teclado de resposta ao toque] novamente
para sair desta função, o LCD exibirá as instruções.
Dividido
Pressione o botão [dividir], o teclado se divide em duas áreas; nesse momento, o LCD exibe o
segundo timbre, pressione o botão [+/-] para alterar o timbre, pressione
o botão [dividir] novamente para sair desta função.
Timbre duplo
Pressione o botão [timbre duplo] para tocar as notas com dois timbres combinacionais; neste
momento os timbres exibidos são o segundo, pressione o botão [+/-] para alterar o timbre,
pressione o botão [timbre duplo] novamente para sair esta função.
Função de sintonia
Pressione o botão [+/-] para ajustar a melodia, o alcance do ajuste é de -99 a 99.
Música demo
30 músicas demo para sua seleção, veja no anexo 3. Pressione o botão [demo] para reproduzir a
música demo ciclicamente. Pressione o botão [+/-] para escolher a música demo.
Função de ensino
Pressione o botão [tecla única] [seguir] ou [concerto] para entrar no modo de ensino correspon-
dente; o display LCD exibe o estado correspondente.
A. Tecla única: o botão de nota é pressionado para continuar a música, se você tocar ou não a nota
certa, obterá o som certo. A música ainda continua.
B.Siga: a melodia principal é protegida, parece um karaokê, a música não para, se você não tocar o
teclado por três segundos, a melodia principal será
renovar.
C. Concerto: apenas a nota pressionada corretamente, a música continua, a música toca cíclica,
pressione [tecla única] [seguir] ou [concerto] para sair da função.
Gravação
Pressione o botão [gravar] para entrar na função, as notas gravadas em cerca de 110 notas e as
notas reproduzidas. Nem o dedilhado nem a percussão seriam gravados. Novas notas podem ser
adicionadas até a sala car cheia. Quando a gravação estiver em andamento. pressione [playback]
para reproduzir as notas gravadas uma a uma, o LCD exibirá o estado correspondente; quando a
sala estiver cheia, o LCD exibirá “full” por 4 segundos; pressione o botão [record] novamente para
sair da função.
Programação de ritmo
Pressione o botão [program] para entrar no modo de programação e no modo correspondente
exibido no LCD.No modo de programação para editar bateria no teclado, apenas uma bateria pode
ser editada por vez e a bateria editada não deve exceder o número máximo 32 Pressione uma tecla
uma vez para editar uma batida vazia com mais de 32 notas. O LCD exibirá "cheio" por 3 segundos.
No modo de programação.
pressione [programa] para nalizar esta função e entrar na função normal, neste momento o modo
correspondente é exibido no LCD.
No modo de programação, pressione [playback] para tocar a bateria editada ciclicamente,
formando um ritmo de estilo auto-editado, o estado correspondente exibido no LCD. Neste modo,
você pode escolher diferentes timbres para tocar.
5. Com leitor de música USB
Volume [+] e [-]: o botão de volume é pressionado para aumentar ou reduzir o volume.
Música anterior / música seguinte: o botão anterior ou o botão seguinte é pressionado para
selecionar a música anterior ou a próxima música; a pressão nos dois botões é retroceder ou
avançar rapidamente.
Modo EQ: O botão EQ é pressionado toda vez, o modo normal, jazz, clássico, popular e rock and
roll são alterados.
Modo de reprodução: o botão é pressionado pela primeira vez e a música no arquivo é reproduzi-
da; o botão é pressionado pela segunda vez e o modo muda para o modo de ciclo único. O botão é
pressionado pela terceira vez e o modo muda para o modo de reprodução aleatória.
Em reprodução: o disco U é aprendido antes de ligar. O botão de reprodução é pressionado para
reproduzir a música. Ele suporta apenas o formato de som MP3.
B. The usage of A/C adapter
Use only the YONGMEI AC adapter to power your instrument from AC mains. The method to use
the AC adapter is to put one end into the jack at the back of the keyboard and the other end into
the outlet of AC mains.
C. The usage of external terminal ports
External sustain pedal jack: this keyboard with sustain pedal ports, plug the plug into the port it
can take eect.
MIDI connector: this function uses for audio output and other connected installations that have a
MIDI IN function.
Audio line input: this keyboard with stereo function, it support phone, USB music player, computer
or other audio signal input the keyboard to play.
Firstly turn o the keyboard, plug the audio plug into the facility and the other end plug into the
keyboard and then turn on the keyboard.
Microphone input: Plug the microphone plug into the port, than you can use while playing the
keyboard.
Line out:Insert the plug of the speaker into [speaker] socket, and the performance eect will be
enhanced.
Earphone output:Plug the earphone plug into the port, in order to avoid inuencing other people
while the keyboard is learned.
III. The Function Operation
Press the button [power switch] then you can start playing when the number 120 appears on LCD.
1. Basic performance
Volume controlling
(1)Master volume control:16 grades in all, 12 grades is the default opening volume, press the
button [+/-] to turn up or turn down the volume.
(2)Chord volume:10 grades in all,controlling the volume of chord rhythm.
(3)Rhythm volume:10 grades in all, adjust the volume of keyboard percussion music.
(4)Press the button [+/-] no loosen for 2 seconds, you can turn up or turn down the volume
quickly.Press the button [+/-] at the same time for 2 seconds,the volume restore the default values.
(5)Timbre selection: in usual mode, press the button [timbre] then you can choose the timbre,300
timbres for selection. The number 000 piano is the opening default timbre.Press the button [+/-] or
3 numbers to choose the timbre.
(6）Keyboard percussion music:press the button [keyboard percussion music] at this time the
keyboard turn into the keyboard percussion music,each pair of them has corresponding relation.
Press the button again to quit the function.
2. Auto accompaniment
(1)Rhythms selection
300 rhythms in all to choose, in usual mode, press the button [timbre] to start this function,the
number 00 is the default opening rhythm. Press 3 number key or [+/-] to choose the rhythm.
(2) Rhythms start and stop
Press the button [start/stop] to start this function, the beat with the light, press the button again to
quit this function.
(3) Fill-in,prelude and postlude
In rhythm playing mode,press the button [ll-in] to play the rhythm , after the
rhythm press the button [prelude/postlude] to enter the prelude mode, after tho
prelude playing mode will go into the postlude playing mode automatically.
(4) Sync function
Press the button [sync] to start the sync function, at this time press the 19 bass button, the rhythm
will be played, and quit the sync function at the same time.
(5) Tempo function
Press the button [metronome] to start the metronome with a sound“dida", playing with a tempo
eect. Press the button continuously, 1/4, 2/4, 3/4, 4/4 and stop, four metronome for selection,
press the button the LCD displays " normal" then you can quit the function.
Tempo setting
120 is the opening default tempo, press the button [+/-] to adjust the tempo, the
adjustment scope is between 30 to 240.
3. Auto bass chord
Single nger bass chord
When rhythm is in service, press the button [single nger chord] to start corresponding automatic
accompaniment chord function,at this time you can play with single ngering in the 19 bass button
area with chord accompaniment, press the button again to quit the function. When the rhythm is not
in service. press the button [single nger chord] to start the single nger chord function, at this time
you can play with single nger chord, press the button again to quit the function.
Multi-nger chord
When rhythm is in service. press the button [multi- nger chord] to start the auto bass chord, at this
time you can play with multi ngering in the 19 bass button area with chord accompaniment, Press
the button [multi-nger chord] again or [chord o] to end this function.
Comprehensive chord
When rhythm is in service, press the button [comprehensive chord] to start this function, at this time
you can play with single nger chord or multi-nger chord. Press the button again to quit the
function.
All of these three functions are displayed on LCD to lead you to play the keyboard.
Status register
According the playing need, after adjusted the timbre, rhythm, tempo, press the button[memory] or
[memory 1-4] the playing timbre, rhythm, tempo are renewing the corresponding state of the
system.
4. Eect control
Sustain & vibrato
Press the button [sustain] to enter the sustain function,the endnotes played are lengthened.
Press the button [vibrato] to enter the function, the pitch of the notes vibrates within a limited
range.
When sustain & vibrato is in service LCD will display the instruction.
Rising tone & falling tone
Press the button [transposition] to adjust the tone,it is able to adjust to increase 6 grades or reduce
6 grades. Press the button [+] and [-] at the meantime, the transposition turned into 0, LCD display
the pitch for 3 seconds.
Touch response keyboard
This keyboard with touch response function,is start on default when keyboard is turn on,the
volume is depend on the touch strength, press the button [touch response keyboard] again to quit
this function, LCD will display the instruction.
Split
Press the button [split] the keyboard divide into two areas, at this time LCD displays the second
timbre, press the button [+/-] to change the timbre, press
the button [split] again to quit this function.
Double timbre playing
Press the button [double timbre] to play the notes with combinational two timbres, at this time the
timbres displayed is the second one, press the button [+/-] to change the timbre, press the button
[double timbre] again to quit this function.
Tune function
Press the button [+/-] to adjust the tune, the adjustment scope is -99 to 99.
Demo song
30 demo songs for your selection, please see in attachment 3. Press the button [demo] to play the
demo song cyclically. Press the button [+/-] to choose the demo song.
Teaching function
Press the button [single-key] [follow] or [concert] to enter the corresponding teaching mode,LCD
display the corresponding state.
A.Single-key: the note button is pressed to continue the music, whether or not you play the right
note, you will get the right sound. The song still goes on.
B.Follow:the main melody is shielded it seems like karaoke,the song would not stop, if you do not
play the keyboard for three seconds, the main melody will
renew.
C. Concert:only the note pressed correctly, the song would goes on, the song would played
cyclical, press the [single-key] [follow] or [concert] to quit the function.
Recording
Press the button [record] to go into the function, the notes recorded about 110 notes, the notes
playing will be recorded. Neither ngering nor percussion would be recorded. New notes can be
added till the room is full.When recording is under way. press [playback] to play the recorded notes
one by one, LCD display the corresponding state ,when the room is full the LCD will display“full"
for 4 second , press the [record] button again to quit the function.
Rhythm programming
Press the button [program] to go into the programming mode and the corresponding mode
display on LCD.In the programming mode to edit drums into the keyboard, only one drum can be
edit at a time and drums edited should not exceed the maximum number 32. press a key once to
edit an empty beat more than 32 notes LCD will display “full" for 3 second.In programming mode.
press [program] to end this function and get into normal function, at this time corresponding
mode display on LCD.
In programming mode,press [playback] to play the drums edited cyclically, forming a rhythm of
self- edited style,corresponding state displayed on LCD. In this mode you can choose dierent
timbre to play.
5. With USB music player
Volume [+] and [-]:the volume button is pressed to increase the volume or reduce the volume.
Prev.music/ next .music: the prev button or next button is pressed to select prev music or next
music, the pressing on the two buttons are fast-back or fast-forward.
EQ mode:EQ button is pressed every time, the normal mode, jazz mode, classical mode,popular
mode and rock and roll mode is changed in turn.
Playing mode: the button is pressed for the rst time, and the music in the le is played; the button
is pressed for the second time, and the mode is change into the single-cycle mode.The button is
pressed for the third time, and the mode is change into the random playing mode.
Playing:the U disk is learned before the power is on. The playing button is pressed to play the
music. It only support MP3 sound format.
7
B. O uso do adaptador A/C
Use apenas o adaptador A/C KEY POWER para alimentar seu instrumento da rede elétrica A/C.
O método para usar o adaptador CA é colocar uma extremidade na tomada na parte traseira do
teclado e a outra extremidade na tomada da rede elétrica A/C.
C. O uso de portas de terminais externos
Conector externo do pedal de sustentação: este teclado com portas de pedal de sustentação,
conecte o plugue à porta que pode entrar em vigor.
Conector MIDI: esta função usa para saída de áudio e outras instalações conectadas que com
função MIDI IN.
Entrada de linha de áudio: este teclado com função estéreo, suporta telefone, tocador de música
USB, computador ou outro sinal de áudio que o teclado deve tocar.
Primeiro, desligue o teclado, conecte o plugue de áudio na instalação e a outra extremidade no
teclado e depois ligue o teclado.
Entrada de microfone: conecte o plugue do microfone na porta, do que você pode usar enquanto
toca o teclado.
Saída de linha: insira o plugue do alto-falante no soquete [alto-falante] e o efeito de desempenho
será aprimorado.
Saída do fone de ouvido: conecte o plugue do fone de ouvido na porta, para evitar inuenciar
outras pessoas enquanto o teclado é aprendido.
III. A Preparação para tocar
Pressione o botão [botão liga / desliga] e poderá começar a tocar quando o número 120 aparecer
no LCD.
1. Desempenho Básico
Controle de volume
(1) Controle de volume principal: 16 notas no total, 12 notas é o volume de abertura padrão,
pressione o botão [+/-] para aumentar ou diminuir o volume.
(2) Volume do acorde: 10 notas ao todo, controlando o volume do ritmo do acorde.
(3) Volume do ritmo: 10 notas no total, ajuste o volume da música de percussão do teclado.
(4) Pressione o botão [+/-] sem afrouxar por 2 segundos, você pode aumentar ou diminuir o
volume rapidamente.Pressione o botão [+/-] ao mesmo tempo por 2 segundos, o volume restaura-
rá os valores padrão .
(5) Seleção de timbre: no modo usual, pressione o botão [timbre] e, em seguida, você pode
escolher o timbre, 300 timbres para seleção. O piano número 000 é o timbre padrão de abertura.
Pressione o botão [+/-] ou 3 números para escolher o timbre.
(6 music Música de percussão do teclado: pressione o botão [música de percussão do teclado] e,
neste momento, o teclado se transforma na música de percussão do teclado, cada par deles tem
uma relação correspondente.
2 .Auto Acompanhamento
(1) Seleção de ritmos
Ao todo 300 ritmos para escolher, no modo usual, pressione o botão [timbre] para iniciar esta
função, o número 00 é o ritmo de abertura padrão. Pressione a tecla numérica 3 ou [+/-] para
escolher o ritmo.
(2) Os ritmos começam e param
Pressione o botão [start / stop] para iniciar esta função, a batida com a luz, pressione o botão
novamente para sair desta função.
(3) Preenchimento, prelúdio e adiamento
No modo de reprodução de ritmo, pressione o botão [ll-in] para reproduzir o ritmo, após o
ritmo, pressione o botão [prelude / postlude] para entrar no modo prelúdio, depois de
o modo de reprodução prelúdio entrará no modo de reprodução adiado automaticamente.
(4) função de sincronização
Pressione o botão [sync] para iniciar a função de sincronização; nesse momento, pressione o botão
19 graves, o ritmo será reproduzido e saia da função de sincronização ao mesmo tempo.
(5) função Tempo
Pressione o botão [metrônomo] para iniciar o metrônomo com um som "dida", tocando com um
efeito de andamento. Pressione o botão continuamente, 1/4, 2/4, 3/4, 4/4 e pare, quatro metrôno-
mos para seleção , pressione o botão que o LCD exibe "normal" e você pode sair da função.
Conguração de tempo
120 é o tempo padrão de abertura, pressione o botão [+/-] para ajustar o tempo, o
o escopo de ajuste está entre 30 e 240.
3. Acorde de graves automático
Acorde baixo de um dedo
Quando o ritmo estiver em serviço, pressione o botão [acorde com um dedo] para iniciar a função
correspondente de acordes de acompanhamento automático; nesse momento, você pode tocar
com um toque na área de 19 graves com acompanhamento de acordes, pressione o botão
novamente para sair da função. Quando o ritmo não está em serviço. pressione o botão [acorde
com um dedo] para iniciar a função de acorde com um dedo; neste momento você pode tocar
com acorde com um dedo, pressione o botão novamente para sair da função.
Acorde com vários dedos.
Quando o ritmo está em serviço. pressione o botão [acorde de vários dedos] para iniciar o acorde
de graves automáticos; neste momento, você pode tocar com vários dedos na área de 19 graves
com acompanhamento de acordes. Pressione o botão [acorde de vários dedos] novamente ou
[acorde desligado] para nalizar esta função.
Acorde abrangente
Quando o ritmo estiver em serviço, pressione o botão [acorde abrangente] para iniciar esta função.
Nesse momento, você pode tocar com um acorde de dedo único ou com vários dedos. Pressione o
botão novamente para sair da função.
Todas essas três funções são exibidas no LCD para que você toque o teclado.
Registro de status
De acordo com a necessidade de reprodução, após ajustar o timbre, ritmo, andamento, pressione o
botão [memory] ou [memory 1-4] o timbre, ritmo e andamento da reprodução renovando o
estado correspondente do sistema.
4. Controle de efeito
Sustain & vibrato
Pressione o botão [sustain] para entrar na função de sustentação, as notas nais tocadas são
alongadas.
Pressione o botão [vibrato] para entrar na função, o tom das notas vibra dentro de um intervalo
limitado.
Quando o sustain e o vibrato estão em serviço, o LCD exibirá a instrução.
Tom crescente e tom decrescente
Pressione o botão [transposição] para ajustar o tom, é possível ajustar para aumentar 6 notas ou
reduzir 6 notas. Pressione o botão [+] e [-] enquanto isso, a transposição se transforma em 0, o LCD
exibe a anação por 3 segundos.
Teclado de resposta ao toque
Este teclado com função de resposta ao toque é iniciado por padrão quando o teclado é ligado, o
volume depende da força do toque, pressione o botão [teclado de resposta ao toque] novamente
para sair desta função, o LCD exibirá as instruções.
Dividido
Pressione o botão [dividir], o teclado se divide em duas áreas; nesse momento, o LCD exibe o
segundo timbre, pressione o botão [+/-] para alterar o timbre, pressione
o botão [dividir] novamente para sair desta função.
Timbre duplo
Pressione o botão [timbre duplo] para tocar as notas com dois timbres combinacionais; neste
momento os timbres exibidos são o segundo, pressione o botão [+/-] para alterar o timbre,
pressione o botão [timbre duplo] novamente para sair esta função.
Função de sintonia
Pressione o botão [+/-] para ajustar a melodia, o alcance do ajuste é de -99 a 99.
Música demo
30 músicas demo para sua seleção, veja no anexo 3. Pressione o botão [demo] para reproduzir a
música demo ciclicamente. Pressione o botão [+/-] para escolher a música demo.
Função de ensino
Pressione o botão [tecla única] [seguir] ou [concerto] para entrar no modo de ensino correspon-
dente; o display LCD exibe o estado correspondente.
A. Tecla única: o botão de nota é pressionado para continuar a música, se você tocar ou não a nota
certa, obterá o som certo. A música ainda continua.
B.Siga: a melodia principal é protegida, parece um karaokê, a música não para, se você não tocar o
teclado por três segundos, a melodia principal será
renovar.
C. Concerto: apenas a nota pressionada corretamente, a música continua, a música toca cíclica,
pressione [tecla única] [seguir] ou [concerto] para sair da função.
Gravação
Pressione o botão [gravar] para entrar na função, as notas gravadas em cerca de 110 notas e as
notas reproduzidas. Nem o dedilhado nem a percussão seriam gravados. Novas notas podem ser
adicionadas até a sala car cheia. Quando a gravação estiver em andamento. pressione [playback]
para reproduzir as notas gravadas uma a uma, o LCD exibirá o estado correspondente; quando a
sala estiver cheia, o LCD exibirá “full” por 4 segundos; pressione o botão [record] novamente para
sair da função.
Programação de ritmo
Pressione o botão [program] para entrar no modo de programação e no modo correspondente
exibido no LCD.No modo de programação para editar bateria no teclado, apenas uma bateria pode
ser editada por vez e a bateria editada não deve exceder o número máximo 32 Pressione uma tecla
uma vez para editar uma batida vazia com mais de 32 notas. O LCD exibirá "cheio" por 3 segundos.
No modo de programação.
pressione [programa] para nalizar esta função e entrar na função normal, neste momento o modo
correspondente é exibido no LCD.
No modo de programação, pressione [playback] para tocar a bateria editada ciclicamente,
formando um ritmo de estilo auto-editado, o estado correspondente exibido no LCD. Neste modo,
você pode escolher diferentes timbres para tocar.
5. Com leitor de música USB
Volume [+] e [-]: o botão de volume é pressionado para aumentar ou reduzir o volume.
Música anterior / música seguinte: o botão anterior ou o botão seguinte é pressionado para
selecionar a música anterior ou a próxima música; a pressão nos dois botões é retroceder ou
avançar rapidamente.
Modo EQ: O botão EQ é pressionado toda vez, o modo normal, jazz, clássico, popular e rock and
roll são alterados.
Modo de reprodução: o botão é pressionado pela primeira vez e a música no arquivo é reproduzi-
da; o botão é pressionado pela segunda vez e o modo muda para o modo de ciclo único. O botão é
pressionado pela terceira vez e o modo muda para o modo de reprodução aleatória.
Em reprodução: o disco U é aprendido antes de ligar. O botão de reprodução é pressionado para
reproduzir a música. Ele suporta apenas o formato de som MP3.
B. The usage of A/C adapter
Use only the YONGMEI AC adapter to power your instrument from AC mains. The method to use
the AC adapter is to put one end into the jack at the back of the keyboard and the other end into
the outlet of AC mains.
C. The usage of external terminal ports
External sustain pedal jack: this keyboard with sustain pedal ports, plug the plug into the port it
can take eect.
MIDI connector: this function uses for audio output and other connected installations that have a
MIDI IN function.
Audio line input: this keyboard with stereo function, it support phone, USB music player, computer
or other audio signal input the keyboard to play.
Firstly turn o the keyboard, plug the audio plug into the facility and the other end plug into the
keyboard and then turn on the keyboard.
Microphone input: Plug the microphone plug into the port, than you can use while playing the
keyboard.
Line out:Insert the plug of the speaker into [speaker] socket, and the performance eect will be
enhanced.
Earphone output:Plug the earphone plug into the port, in order to avoid inuencing other people
while the keyboard is learned.
III. The Function Operation
Press the button [power switch] then you can start playing when the number 120 appears on LCD.
1. Basic performance
Volume controlling
(1)Master volume control:16 grades in all, 12 grades is the default opening volume, press the
button [+/-] to turn up or turn down the volume.
(2)Chord volume:10 grades in all,controlling the volume of chord rhythm.
(3)Rhythm volume:10 grades in all, adjust the volume of keyboard percussion music.
(4)Press the button [+/-] no loosen for 2 seconds, you can turn up or turn down the volume
quickly.Press the button [+/-] at the same time for 2 seconds,the volume restore the default values.
(5)Timbre selection: in usual mode, press the button [timbre] then you can choose the timbre,300
timbres for selection. The number 000 piano is the opening default timbre.Press the button [+/-] or
3 numbers to choose the timbre.
(6）Keyboard percussion music:press the button [keyboard percussion music] at this time the
keyboard turn into the keyboard percussion music,each pair of them has corresponding relation.
Press the button again to quit the function.
2. Auto accompaniment
(1)Rhythms selection
300 rhythms in all to choose, in usual mode, press the button [timbre] to start this function,the
number 00 is the default opening rhythm. Press 3 number key or [+/-] to choose the rhythm.
(2) Rhythms start and stop
Press the button [start/stop] to start this function, the beat with the light, press the button again to
quit this function.
(3) Fill-in,prelude and postlude
In rhythm playing mode,press the button [ll-in] to play the rhythm , after the
rhythm press the button [prelude/postlude] to enter the prelude mode, after tho
prelude playing mode will go into the postlude playing mode automatically.
(4) Sync function
Press the button [sync] to start the sync function, at this time press the 19 bass button, the rhythm
will be played, and quit the sync function at the same time.
(5) Tempo function
Press the button [metronome] to start the metronome with a sound“dida", playing with a tempo
eect. Press the button continuously, 1/4, 2/4, 3/4, 4/4 and stop, four metronome for selection,
press the button the LCD displays " normal" then you can quit the function.
Tempo setting
120 is the opening default tempo, press the button [+/-] to adjust the tempo, the
adjustment scope is between 30 to 240.
3. Auto bass chord
Single nger bass chord
When rhythm is in service, press the button [single nger chord] to start corresponding automatic
accompaniment chord function,at this time you can play with single ngering in the 19 bass button
area with chord accompaniment, press the button again to quit the function. When the rhythm is not
in service. press the button [single nger chord] to start the single nger chord function, at this time
you can play with single nger chord, press the button again to quit the function.
Multi-nger chord
When rhythm is in service. press the button [multi- nger chord] to start the auto bass chord, at this
time you can play with multi ngering in the 19 bass button area with chord accompaniment, Press
the button [multi-nger chord] again or [chord o] to end this function.
Comprehensive chord
When rhythm is in service, press the button [comprehensive chord] to start this function, at this time
you can play with single nger chord or multi-nger chord. Press the button again to quit the
function.
All of these three functions are displayed on LCD to lead you to play the keyboard.
Status register
According the playing need, after adjusted the timbre, rhythm, tempo, press the button[memory] or
[memory 1-4] the playing timbre, rhythm, tempo are renewing the corresponding state of the
system.
4. Eect control
Sustain & vibrato
Press the button [sustain] to enter the sustain function,the endnotes played are lengthened.
Press the button [vibrato] to enter the function, the pitch of the notes vibrates within a limited
range.
When sustain & vibrato is in service LCD will display the instruction.
Rising tone & falling tone
Press the button [transposition] to adjust the tone,it is able to adjust to increase 6 grades or reduce
6 grades. Press the button [+] and [-] at the meantime, the transposition turned into 0, LCD display
the pitch for 3 seconds.
Touch response keyboard
This keyboard with touch response function,is start on default when keyboard is turn on,the
volume is depend on the touch strength, press the button [touch response keyboard] again to quit
this function, LCD will display the instruction.
Split
Press the button [split] the keyboard divide into two areas, at this time LCD displays the second
timbre, press the button [+/-] to change the timbre, press
the button [split] again to quit this function.
Double timbre playing
Press the button [double timbre] to play the notes with combinational two timbres, at this time the
timbres displayed is the second one, press the button [+/-] to change the timbre, press the button
[double timbre] again to quit this function.
Tune function
Press the button [+/-] to adjust the tune, the adjustment scope is -99 to 99.
Demo song
30 demo songs for your selection, please see in attachment 3. Press the button [demo] to play the
demo song cyclically. Press the button [+/-] to choose the demo song.
Teaching function
Press the button [single-key] [follow] or [concert] to enter the corresponding teaching mode,LCD
display the corresponding state.
A.Single-key: the note button is pressed to continue the music, whether or not you play the right
note, you will get the right sound. The song still goes on.
B.Follow:the main melody is shielded it seems like karaoke,the song would not stop, if you do not
play the keyboard for three seconds, the main melody will
renew.
C. Concert:only the note pressed correctly, the song would goes on, the song would played
cyclical, press the [single-key] [follow] or [concert] to quit the function.
Recording
Press the button [record] to go into the function, the notes recorded about 110 notes, the notes
playing will be recorded. Neither ngering nor percussion would be recorded. New notes can be
added till the room is full.When recording is under way. press [playback] to play the recorded notes
one by one, LCD display the corresponding state ,when the room is full the LCD will display“full"
for 4 second , press the [record] button again to quit the function.
Rhythm programming
Press the button [program] to go into the programming mode and the corresponding mode
display on LCD.In the programming mode to edit drums into the keyboard, only one drum can be
edit at a time and drums edited should not exceed the maximum number 32. press a key once to
edit an empty beat more than 32 notes LCD will display “full" for 3 second.In programming mode.
press [program] to end this function and get into normal function, at this time corresponding
mode display on LCD.
In programming mode,press [playback] to play the drums edited cyclically, forming a rhythm of
self- edited style,corresponding state displayed on LCD. In this mode you can choose dierent
timbre to play.
5. With USB music player
Volume [+] and [-]:the volume button is pressed to increase the volume or reduce the volume.
Prev.music/ next .music: the prev button or next button is pressed to select prev music or next
music, the pressing on the two buttons are fast-back or fast-forward.
EQ mode:EQ button is pressed every time, the normal mode, jazz mode, classical mode,popular
mode and rock and roll mode is changed in turn.
Playing mode: the button is pressed for the rst time, and the music in the le is played; the button
is pressed for the second time, and the mode is change into the single-cycle mode.The button is
pressed for the third time, and the mode is change into the random playing mode.
Playing:the U disk is learned before the power is on. The playing button is pressed to play the
music. It only support MP3 sound format.
8
B. The usage of A/C adapter
Use only the YONGMEI AC adapter to power your instrument from AC mains. The method to use
the AC adapter is to put one end into the jack at the back of the keyboard and the other end into
the outlet of AC mains.
C. The usage of external terminal ports
External sustain pedal jack: this keyboard with sustain pedal ports, plug the plug into the port it
can take eect.
MIDI connector: this function uses for audio output and other connected installations that have a
MIDI IN function.
Audio line input: this keyboard with stereo function, it support phone, USB music player, computer
or other audio signal input the keyboard to play.
Firstly turn o the keyboard, plug the audio plug into the facility and the other end plug into the
keyboard and then turn on the keyboard.
Microphone input: Plug the microphone plug into the port, than you can use while playing the
keyboard.
Line out:Insert the plug of the speaker into [speaker] socket, and the performance eect will be
enhanced.
Earphone output:Plug the earphone plug into the port, in order to avoid inuencing other people
while the keyboard is learned.
III. The Function Operation
Press the button [power switch] then you can start playing when the number 120 appears on LCD.
1. Basic performance
Volume controlling
(1)Master volume control:16 grades in all, 12 grades is the default opening volume, press the
button [+/-] to turn up or turn down the volume.
(2)Chord volume:10 grades in all,controlling the volume of chord rhythm.
(3)Rhythm volume:10 grades in all, adjust the volume of keyboard percussion music.
(4)Press the button [+/-] no loosen for 2 seconds, you can turn up or turn down the volume
quickly.Press the button [+/-] at the same time for 2 seconds,the volume restore the default values.
(5)Timbre selection: in usual mode, press the button [timbre] then you can choose the timbre,300
timbres for selection. The number 000 piano is the opening default timbre.Press the button [+/-] or
3 numbers to choose the timbre.
(6）Keyboard percussion music:press the button [keyboard percussion music] at this time the
keyboard turn into the keyboard percussion music,each pair of them has corresponding relation.
Press the button again to quit the function.
2. Auto accompaniment
(1)Rhythms selection
300 rhythms in all to choose, in usual mode, press the button [timbre] to start this function,the
number 00 is the default opening rhythm. Press 3 number key or [+/-] to choose the rhythm.
(2) Rhythms start and stop
Press the button [start/stop] to start this function, the beat with the light, press the button again to
quit this function.
(3) Fill-in,prelude and postlude
In rhythm playing mode,press the button [ll-in] to play the rhythm , after the
rhythm press the button [prelude/postlude] to enter the prelude mode, after tho
prelude playing mode will go into the postlude playing mode automatically.
(4) Sync function
Press the button [sync] to start the sync function, at this time press the 19 bass button, the rhythm
will be played, and quit the sync function at the same time.
(5) Tempo function
Press the button [metronome] to start the metronome with a sound“dida", playing with a tempo
eect. Press the button continuously, 1/4, 2/4, 3/4, 4/4 and stop, four metronome for selection,
press the button the LCD displays " normal" then you can quit the function.
Tempo setting
120 is the opening default tempo, press the button [+/-] to adjust the tempo, the
adjustment scope is between 30 to 240.
3. Auto bass chord
Single nger bass chord
When rhythm is in service, press the button [single nger chord] to start corresponding automatic
accompaniment chord function,at this time you can play with single ngering in the 19 bass button
area with chord accompaniment, press the button again to quit the function. When the rhythm is not
in service. press the button [single nger chord] to start the single nger chord function, at this time
you can play with single nger chord, press the button again to quit the function.
Multi-nger chord
When rhythm is in service. press the button [multi- nger chord] to start the auto bass chord, at this
time you can play with multi ngering in the 19 bass button area with chord accompaniment, Press
the button [multi-nger chord] again or [chord o] to end this function.
Comprehensive chord
When rhythm is in service, press the button [comprehensive chord] to start this function, at this time
you can play with single nger chord or multi-nger chord. Press the button again to quit the
function.
All of these three functions are displayed on LCD to lead you to play the keyboard.
Status register
According the playing need, after adjusted the timbre, rhythm, tempo, press the button[memory] or
[memory 1-4] the playing timbre, rhythm, tempo are renewing the corresponding state of the
system.
4. Eect control
Sustain & vibrato
Press the button [sustain] to enter the sustain function,the endnotes played are lengthened.
Press the button [vibrato] to enter the function, the pitch of the notes vibrates within a limited
range.
When sustain & vibrato is in service LCD will display the instruction.
Rising tone & falling tone
Press the button [transposition] to adjust the tone,it is able to adjust to increase 6 grades or reduce
6 grades. Press the button [+] and [-] at the meantime, the transposition turned into 0, LCD display
the pitch for 3 seconds.
Touch response keyboard
This keyboard with touch response function,is start on default when keyboard is turn on,the
volume is depend on the touch strength, press the button [touch response keyboard] again to quit
this function, LCD will display the instruction.
Split
Press the button [split] the keyboard divide into two areas, at this time LCD displays the second
timbre, press the button [+/-] to change the timbre, press
the button [split] again to quit this function.
Double timbre playing
Press the button [double timbre] to play the notes with combinational two timbres, at this time the
timbres displayed is the second one, press the button [+/-] to change the timbre, press the button
[double timbre] again to quit this function.
Tune function
Press the button [+/-] to adjust the tune, the adjustment scope is -99 to 99.
Demo song
30 demo songs for your selection, please see in attachment 3. Press the button [demo] to play the
demo song cyclically. Press the button [+/-] to choose the demo song.
Teaching function
Press the button [single-key] [follow] or [concert] to enter the corresponding teaching mode,LCD
display the corresponding state.
A.Single-key: the note button is pressed to continue the music, whether or not you play the right
note, you will get the right sound. The song still goes on.
B.Follow:the main melody is shielded it seems like karaoke,the song would not stop, if you do not
play the keyboard for three seconds, the main melody will
renew.
C. Concert:only the note pressed correctly, the song would goes on, the song would played
cyclical, press the [single-key] [follow] or [concert] to quit the function.
Recording
Press the button [record] to go into the function, the notes recorded about 110 notes, the notes
playing will be recorded. Neither ngering nor percussion would be recorded. New notes can be
added till the room is full.When recording is under way. press [playback] to play the recorded notes
one by one, LCD display the corresponding state ,when the room is full the LCD will display“full"
for 4 second , press the [record] button again to quit the function.
Rhythm programming
Press the button [program] to go into the programming mode and the corresponding mode
display on LCD.In the programming mode to edit drums into the keyboard, only one drum can be
edit at a time and drums edited should not exceed the maximum number 32. press a key once to
edit an empty beat more than 32 notes LCD will display “full" for 3 second.In programming mode.
press [program] to end this function and get into normal function, at this time corresponding
mode display on LCD.
In programming mode,press [playback] to play the drums edited cyclically, forming a rhythm of
self- edited style,corresponding state displayed on LCD. In this mode you can choose dierent
timbre to play.
5. With USB music player
Volume [+] and [-]:the volume button is pressed to increase the volume or reduce the volume.
Prev.music/ next .music: the prev button or next button is pressed to select prev music or next
music, the pressing on the two buttons are fast-back or fast-forward.
EQ mode:EQ button is pressed every time, the normal mode, jazz mode, classical mode,popular
mode and rock and roll mode is changed in turn.
Playing mode: the button is pressed for the rst time, and the music in the le is played; the button
is pressed for the second time, and the mode is change into the single-cycle mode.The button is
pressed for the third time, and the mode is change into the random playing mode.
Playing:the U disk is learned before the power is on. The playing button is pressed to play the
music. It only support MP3 sound format.
B. The usage of A/C adapter
Use only the YONGMEI AC adapter to power your instrument from AC mains. The method to use
the AC adapter is to put one end into the jack at the back of the keyboard and the other end into
the outlet of AC mains.
C. The usage of external terminal ports
External sustain pedal jack: this keyboard with sustain pedal ports, plug the plug into the port it
can take eect.
MIDI connector: this function uses for audio output and other connected installations that have a
MIDI IN function.
Audio line input: this keyboard with stereo function, it support phone, USB music player, computer
or other audio signal input the keyboard to play.
Firstly turn o the keyboard, plug the audio plug into the facility and the other end plug into the
keyboard and then turn on the keyboard.
Microphone input: Plug the microphone plug into the port, than you can use while playing the
keyboard.
Line out:Insert the plug of the speaker into [speaker] socket, and the performance eect will be
enhanced.
Earphone output:Plug the earphone plug into the port, in order to avoid inuencing other people
while the keyboard is learned.
III. The Function Operation
Press the button [power switch] then you can start playing when the number 120 appears on LCD.
1. Basic performance
Volume controlling
(1)Master volume control:16 grades in all, 12 grades is the default opening volume, press the
button [+/-] to turn up or turn down the volume.
(2)Chord volume:10 grades in all,controlling the volume of chord rhythm.
(3)Rhythm volume:10 grades in all, adjust the volume of keyboard percussion music.
(4)Press the button [+/-] no loosen for 2 seconds, you can turn up or turn down the volume
quickly.Press the button [+/-] at the same time for 2 seconds,the volume restore the default values.
(5)Timbre selection: in usual mode, press the button [timbre] then you can choose the timbre,300
timbres for selection. The number 000 piano is the opening default timbre.Press the button [+/-] or
3 numbers to choose the timbre.
(6）Keyboard percussion music:press the button [keyboard percussion music] at this time the
keyboard turn into the keyboard percussion music,each pair of them has corresponding relation.
Press the button again to quit the function.
2. Auto accompaniment
(1)Rhythms selection
300 rhythms in all to choose, in usual mode, press the button [timbre] to start this function,the
number 00 is the default opening rhythm. Press 3 number key or [+/-] to choose the rhythm.
(2) Rhythms start and stop
Press the button [start/stop] to start this function, the beat with the light, press the button again to
quit this function.
(3) Fill-in,prelude and postlude
In rhythm playing mode,press the button [ll-in] to play the rhythm , after the
rhythm press the button [prelude/postlude] to enter the prelude mode, after tho
prelude playing mode will go into the postlude playing mode automatically.
(4) Sync function
Press the button [sync] to start the sync function, at this time press the 19 bass button, the rhythm
will be played, and quit the sync function at the same time.
(5) Tempo function
Press the button [metronome] to start the metronome with a sound“dida", playing with a tempo
eect. Press the button continuously, 1/4, 2/4, 3/4, 4/4 and stop, four metronome for selection,
press the button the LCD displays " normal" then you can quit the function.
Tempo setting
120 is the opening default tempo, press the button [+/-] to adjust the tempo, the
adjustment scope is between 30 to 240.
3. Auto bass chord
Single nger bass chord
When rhythm is in service, press the button [single nger chord] to start corresponding automatic
accompaniment chord function,at this time you can play with single ngering in the 19 bass button
area with chord accompaniment, press the button again to quit the function. When the rhythm is not
in service. press the button [single nger chord] to start the single nger chord function, at this time
you can play with single nger chord, press the button again to quit the function.
Multi-nger chord
When rhythm is in service. press the button [multi- nger chord] to start the auto bass chord, at this
time you can play with multi ngering in the 19 bass button area with chord accompaniment, Press
the button [multi-nger chord] again or [chord o] to end this function.
Comprehensive chord
When rhythm is in service, press the button [comprehensive chord] to start this function, at this time
you can play with single nger chord or multi-nger chord. Press the button again to quit the
function.
All of these three functions are displayed on LCD to lead you to play the keyboard.
Status register
According the playing need, after adjusted the timbre, rhythm, tempo, press the button[memory] or
[memory 1-4] the playing timbre, rhythm, tempo are renewing the corresponding state of the
system.
4. Eect control
Sustain & vibrato
Press the button [sustain] to enter the sustain function,the endnotes played are lengthened.
Press the button [vibrato] to enter the function, the pitch of the notes vibrates within a limited
range.
When sustain & vibrato is in service LCD will display the instruction.
Rising tone & falling tone
Press the button [transposition] to adjust the tone,it is able to adjust to increase 6 grades or reduce
6 grades. Press the button [+] and [-] at the meantime, the transposition turned into 0, LCD display
the pitch for 3 seconds.
Touch response keyboard
This keyboard with touch response function,is start on default when keyboard is turn on,the
volume is depend on the touch strength, press the button [touch response keyboard] again to quit
this function, LCD will display the instruction.
Split
Press the button [split] the keyboard divide into two areas, at this time LCD displays the second
timbre, press the button [+/-] to change the timbre, press
the button [split] again to quit this function.
Double timbre playing
Press the button [double timbre] to play the notes with combinational two timbres, at this time the
timbres displayed is the second one, press the button [+/-] to change the timbre, press the button
[double timbre] again to quit this function.
Tune function
Press the button [+/-] to adjust the tune, the adjustment scope is -99 to 99.
Demo song
30 demo songs for your selection, please see in attachment 3. Press the button [demo] to play the
demo song cyclically. Press the button [+/-] to choose the demo song.
Teaching function
Press the button [single-key] [follow] or [concert] to enter the corresponding teaching mode,LCD
display the corresponding state.
A.Single-key: the note button is pressed to continue the music, whether or not you play the right
note, you will get the right sound. The song still goes on.
B.Follow:the main melody is shielded it seems like karaoke,the song would not stop, if you do not
play the keyboard for three seconds, the main melody will
renew.
C. Concert:only the note pressed correctly, the song would goes on, the song would played
cyclical, press the [single-key] [follow] or [concert] to quit the function.
Recording
Press the button [record] to go into the function, the notes recorded about 110 notes, the notes
playing will be recorded. Neither ngering nor percussion would be recorded. New notes can be
added till the room is full.When recording is under way. press [playback] to play the recorded notes
one by one, LCD display the corresponding state ,when the room is full the LCD will display“full"
for 4 second , press the [record] button again to quit the function.
Rhythm programming
Press the button [program] to go into the programming mode and the corresponding mode
display on LCD.In the programming mode to edit drums into the keyboard, only one drum can be
edit at a time and drums edited should not exceed the maximum number 32. press a key once to
edit an empty beat more than 32 notes LCD will display “full" for 3 second.In programming mode.
press [program] to end this function and get into normal function, at this time corresponding
mode display on LCD.
In programming mode,press [playback] to play the drums edited cyclically, forming a rhythm of
self- edited style,corresponding state displayed on LCD. In this mode you can choose dierent
timbre to play.
5. With USB music player
Volume [+] and [-]:the volume button is pressed to increase the volume or reduce the volume.
Prev.music/ next .music: the prev button or next button is pressed to select prev music or next
music, the pressing on the two buttons are fast-back or fast-forward.
EQ mode:EQ button is pressed every time, the normal mode, jazz mode, classical mode,popular
mode and rock and roll mode is changed in turn.
Playing mode: the button is pressed for the rst time, and the music in the le is played; the button
is pressed for the second time, and the mode is change into the single-cycle mode.The button is
pressed for the third time, and the mode is change into the random playing mode.
Playing:the U disk is learned before the power is on. The playing button is pressed to play the
music. It only support MP3 sound format.
B. The usage of A/C adapter
Use only the YONGMEI AC adapter to power your instrument from AC mains. The method to use
the AC adapter is to put one end into the jack at the back of the keyboard and the other end into
the outlet of AC mains.
C. The usage of external terminal ports
External sustain pedal jack: this keyboard with sustain pedal ports, plug the plug into the port it
can take eect.
MIDI connector: this function uses for audio output and other connected installations that have a
MIDI IN function.
Audio line input: this keyboard with stereo function, it support phone, USB music player, computer
or other audio signal input the keyboard to play.
Firstly turn o the keyboard, plug the audio plug into the facility and the other end plug into the
keyboard and then turn on the keyboard.
Microphone input: Plug the microphone plug into the port, than you can use while playing the
keyboard.
Line out:Insert the plug of the speaker into [speaker] socket, and the performance eect will be
enhanced.
Earphone output:Plug the earphone plug into the port, in order to avoid inuencing other people
while the keyboard is learned.
III. The Function Operation
Press the button [power switch] then you can start playing when the number 120 appears on LCD.
1. Basic performance
Volume controlling
(1)Master volume control:16 grades in all, 12 grades is the default opening volume, press the
button [+/-] to turn up or turn down the volume.
(2)Chord volume:10 grades in all,controlling the volume of chord rhythm.
(3)Rhythm volume:10 grades in all, adjust the volume of keyboard percussion music.
(4)Press the button [+/-] no loosen for 2 seconds, you can turn up or turn down the volume
quickly.Press the button [+/-] at the same time for 2 seconds,the volume restore the default values.
(5)Timbre selection: in usual mode, press the button [timbre] then you can choose the timbre,300
timbres for selection. The number 000 piano is the opening default timbre.Press the button [+/-] or
3 numbers to choose the timbre.
(6）Keyboard percussion music:press the button [keyboard percussion music] at this time the
keyboard turn into the keyboard percussion music,each pair of them has corresponding relation.
Press the button again to quit the function.
2. Auto accompaniment
(1)Rhythms selection
300 rhythms in all to choose, in usual mode, press the button [timbre] to start this function,the
number 00 is the default opening rhythm. Press 3 number key or [+/-] to choose the rhythm.
(2) Rhythms start and stop
Press the button [start/stop] to start this function, the beat with the light, press the button again to
quit this function.
(3) Fill-in,prelude and postlude
In rhythm playing mode,press the button [ll-in] to play the rhythm , after the
rhythm press the button [prelude/postlude] to enter the prelude mode, after tho
prelude playing mode will go into the postlude playing mode automatically.
(4) Sync function
Press the button [sync] to start the sync function, at this time press the 19 bass button, the rhythm
will be played, and quit the sync function at the same time.
(5) Tempo function
Press the button [metronome] to start the metronome with a sound“dida", playing with a tempo
eect. Press the button continuously, 1/4, 2/4, 3/4, 4/4 and stop, four metronome for selection,
press the button the LCD displays " normal" then you can quit the function.
Tempo setting
120 is the opening default tempo, press the button [+/-] to adjust the tempo, the
adjustment scope is between 30 to 240.
3. Auto bass chord
Single nger bass chord
When rhythm is in service, press the button [single nger chord] to start corresponding automatic
accompaniment chord function,at this time you can play with single ngering in the 19 bass button
area with chord accompaniment, press the button again to quit the function. When the rhythm is not
in service. press the button [single nger chord] to start the single nger chord function, at this time
you can play with single nger chord, press the button again to quit the function.
Multi-nger chord
When rhythm is in service. press the button [multi- nger chord] to start the auto bass chord, at this
time you can play with multi ngering in the 19 bass button area with chord accompaniment, Press
the button [multi-nger chord] again or [chord o] to end this function.
Comprehensive chord
When rhythm is in service, press the button [comprehensive chord] to start this function, at this time
you can play with single nger chord or multi-nger chord. Press the button again to quit the
function.
All of these three functions are displayed on LCD to lead you to play the keyboard.
Status register
According the playing need, after adjusted the timbre, rhythm, tempo, press the button[memory] or
[memory 1-4] the playing timbre, rhythm, tempo are renewing the corresponding state of the
system.
4. Eect control
Sustain & vibrato
Press the button [sustain] to enter the sustain function,the endnotes played are lengthened.
Press the button [vibrato] to enter the function, the pitch of the notes vibrates within a limited
range.
When sustain & vibrato is in service LCD will display the instruction.
Rising tone & falling tone
Press the button [transposition] to adjust the tone,it is able to adjust to increase 6 grades or reduce
6 grades. Press the button [+] and [-] at the meantime, the transposition turned into 0, LCD display
the pitch for 3 seconds.
Touch response keyboard
This keyboard with touch response function,is start on default when keyboard is turn on,the
volume is depend on the touch strength, press the button [touch response keyboard] again to quit
this function, LCD will display the instruction.
Split
Press the button [split] the keyboard divide into two areas, at this time LCD displays the second
timbre, press the button [+/-] to change the timbre, press
the button [split] again to quit this function.
Double timbre playing
Press the button [double timbre] to play the notes with combinational two timbres, at this time the
timbres displayed is the second one, press the button [+/-] to change the timbre, press the button
[double timbre] again to quit this function.
Tune function
Press the button [+/-] to adjust the tune, the adjustment scope is -99 to 99.
Demo song
30 demo songs for your selection, please see in attachment 3. Press the button [demo] to play the
demo song cyclically. Press the button [+/-] to choose the demo song.
Teaching function
Press the button [single-key] [follow] or [concert] to enter the corresponding teaching mode,LCD
display the corresponding state.
A.Single-key: the note button is pressed to continue the music, whether or not you play the right
note, you will get the right sound. The song still goes on.
B.Follow:the main melody is shielded it seems like karaoke,the song would not stop, if you do not
play the keyboard for three seconds, the main melody will
renew.
C. Concert:only the note pressed correctly, the song would goes on, the song would played
cyclical, press the [single-key] [follow] or [concert] to quit the function.
Recording
Press the button [record] to go into the function, the notes recorded about 110 notes, the notes
playing will be recorded. Neither ngering nor percussion would be recorded. New notes can be
added till the room is full.When recording is under way. press [playback] to play the recorded notes
one by one, LCD display the corresponding state ,when the room is full the LCD will display“full"
for 4 second , press the [record] button again to quit the function.
Rhythm programming
Press the button [program] to go into the programming mode and the corresponding mode
display on LCD.In the programming mode to edit drums into the keyboard, only one drum can be
edit at a time and drums edited should not exceed the maximum number 32. press a key once to
edit an empty beat more than 32 notes LCD will display “full" for 3 second.In programming mode.
press [program] to end this function and get into normal function, at this time corresponding
mode display on LCD.
In programming mode,press [playback] to play the drums edited cyclically, forming a rhythm of
self- edited style,corresponding state displayed on LCD. In this mode you can choose dierent
timbre to play.
5. With USB music player
Volume [+] and [-]:the volume button is pressed to increase the volume or reduce the volume.
Prev.music/ next .music: the prev button or next button is pressed to select prev music or next
music, the pressing on the two buttons are fast-back or fast-forward.
EQ mode:EQ button is pressed every time, the normal mode, jazz mode, classical mode,popular
mode and rock and roll mode is changed in turn.
Playing mode: the button is pressed for the rst time, and the music in the le is played; the button
is pressed for the second time, and the mode is change into the single-cycle mode.The button is
pressed for the third time, and the mode is change into the random playing mode.
Playing:the U disk is learned before the power is on. The playing button is pressed to play the
music. It only support MP3 sound format.
B. The usage of A/C adapter
Use only the YONGMEI AC adapter to power your instrument from AC mains. The method to use
the AC adapter is to put one end into the jack at the back of the keyboard and the other end into
the outlet of AC mains.
C. The usage of external terminal ports
External sustain pedal jack: this keyboard with sustain pedal ports, plug the plug into the port it
can take eect.
MIDI connector: this function uses for audio output and other connected installations that have a
MIDI IN function.
Audio line input: this keyboard with stereo function, it support phone, USB music player, computer
or other audio signal input the keyboard to play.
Firstly turn o the keyboard, plug the audio plug into the facility and the other end plug into the
keyboard and then turn on the keyboard.
Microphone input: Plug the microphone plug into the port, than you can use while playing the
keyboard.
Line out:Insert the plug of the speaker into [speaker] socket, and the performance eect will be
enhanced.
Earphone output:Plug the earphone plug into the port, in order to avoid inuencing other people
while the keyboard is learned.
III. The Function Operation
Press the button [power switch] then you can start playing when the number 120 appears on LCD.
1. Basic performance
Volume controlling
(1)Master volume control:16 grades in all, 12 grades is the default opening volume, press the
button [+/-] to turn up or turn down the volume.
(2)Chord volume:10 grades in all,controlling the volume of chord rhythm.
(3)Rhythm volume:10 grades in all, adjust the volume of keyboard percussion music.
(4)Press the button [+/-] no loosen for 2 seconds, you can turn up or turn down the volume
quickly.Press the button [+/-] at the same time for 2 seconds,the volume restore the default values.
(5)Timbre selection: in usual mode, press the button [timbre] then you can choose the timbre,300
timbres for selection. The number 000 piano is the opening default timbre.Press the button [+/-] or
3 numbers to choose the timbre.
(6）Keyboard percussion music:press the button [keyboard percussion music] at this time the
keyboard turn into the keyboard percussion music,each pair of them has corresponding relation.
Press the button again to quit the function.
2. Auto accompaniment
(1)Rhythms selection
300 rhythms in all to choose, in usual mode, press the button [timbre] to start this function,the
number 00 is the default opening rhythm. Press 3 number key or [+/-] to choose the rhythm.
(2) Rhythms start and stop
Press the button [start/stop] to start this function, the beat with the light, press the button again to
quit this function.
(3) Fill-in,prelude and postlude
In rhythm playing mode,press the button [ll-in] to play the rhythm , after the
rhythm press the button [prelude/postlude] to enter the prelude mode, after tho
prelude playing mode will go into the postlude playing mode automatically.
(4) Sync function
Press the button [sync] to start the sync function, at this time press the 19 bass button, the rhythm
will be played, and quit the sync function at the same time.
(5) Tempo function
Press the button [metronome] to start the metronome with a sound“dida", playing with a tempo
eect. Press the button continuously, 1/4, 2/4, 3/4, 4/4 and stop, four metronome for selection,
press the button the LCD displays " normal" then you can quit the function.
Tempo setting
120 is the opening default tempo, press the button [+/-] to adjust the tempo, the
adjustment scope is between 30 to 240.
3. Auto bass chord
Single nger bass chord
When rhythm is in service, press the button [single nger chord] to start corresponding automatic
accompaniment chord function,at this time you can play with single ngering in the 19 bass button
area with chord accompaniment, press the button again to quit the function. When the rhythm is not
in service. press the button [single nger chord] to start the single nger chord function, at this time
you can play with single nger chord, press the button again to quit the function.
Multi-nger chord
When rhythm is in service. press the button [multi- nger chord] to start the auto bass chord, at this
time you can play with multi ngering in the 19 bass button area with chord accompaniment, Press
the button [multi-nger chord] again or [chord o] to end this function.
Comprehensive chord
When rhythm is in service, press the button [comprehensive chord] to start this function, at this time
you can play with single nger chord or multi-nger chord. Press the button again to quit the
function.
All of these three functions are displayed on LCD to lead you to play the keyboard.
Status register
According the playing need, after adjusted the timbre, rhythm, tempo, press the button[memory] or
[memory 1-4] the playing timbre, rhythm, tempo are renewing the corresponding state of the
system.
4. Eect control
Sustain & vibrato
Press the button [sustain] to enter the sustain function,the endnotes played are lengthened.
Press the button [vibrato] to enter the function, the pitch of the notes vibrates within a limited
range.
When sustain & vibrato is in service LCD will display the instruction.
Rising tone & falling tone
Press the button [transposition] to adjust the tone,it is able to adjust to increase 6 grades or reduce
6 grades. Press the button [+] and [-] at the meantime, the transposition turned into 0, LCD display
the pitch for 3 seconds.
Touch response keyboard
This keyboard with touch response function,is start on default when keyboard is turn on,the
volume is depend on the touch strength, press the button [touch response keyboard] again to quit
this function, LCD will display the instruction.
Split
Press the button [split] the keyboard divide into two areas, at this time LCD displays the second
timbre, press the button [+/-] to change the timbre, press
the button [split] again to quit this function.
Double timbre playing
Press the button [double timbre] to play the notes with combinational two timbres, at this time the
timbres displayed is the second one, press the button [+/-] to change the timbre, press the button
[double timbre] again to quit this function.
Tune function
Press the button [+/-] to adjust the tune, the adjustment scope is -99 to 99.
Demo song
30 demo songs for your selection, please see in attachment 3. Press the button [demo] to play the
demo song cyclically. Press the button [+/-] to choose the demo song.
Teaching function
Press the button [single-key] [follow] or [concert] to enter the corresponding teaching mode,LCD
display the corresponding state.
A.Single-key: the note button is pressed to continue the music, whether or not you play the right
note, you will get the right sound. The song still goes on.
B.Follow:the main melody is shielded it seems like karaoke,the song would not stop, if you do not
play the keyboard for three seconds, the main melody will
renew.
C. Concert:only the note pressed correctly, the song would goes on, the song would played
cyclical, press the [single-key] [follow] or [concert] to quit the function.
Recording
Press the button [record] to go into the function, the notes recorded about 110 notes, the notes
playing will be recorded. Neither ngering nor percussion would be recorded. New notes can be
added till the room is full.When recording is under way. press [playback] to play the recorded notes
one by one, LCD display the corresponding state ,when the room is full the LCD will display“full"
for 4 second , press the [record] button again to quit the function.
Rhythm programming
Press the button [program] to go into the programming mode and the corresponding mode
display on LCD.In the programming mode to edit drums into the keyboard, only one drum can be
edit at a time and drums edited should not exceed the maximum number 32. press a key once to
edit an empty beat more than 32 notes LCD will display “full" for 3 second.In programming mode.
press [program] to end this function and get into normal function, at this time corresponding
mode display on LCD.
In programming mode,press [playback] to play the drums edited cyclically, forming a rhythm of
self- edited style,corresponding state displayed on LCD. In this mode you can choose dierent
timbre to play.
5. With USB music player
Volume [+] and [-]:the volume button is pressed to increase the volume or reduce the volume.
Prev.music/ next .music: the prev button or next button is pressed to select prev music or next
music, the pressing on the two buttons are fast-back or fast-forward.
EQ mode:EQ button is pressed every time, the normal mode, jazz mode, classical mode,popular
mode and rock and roll mode is changed in turn.
Playing mode: the button is pressed for the rst time, and the music in the le is played; the button
is pressed for the second time, and the mode is change into the single-cycle mode.The button is
pressed for the third time, and the mode is change into the random playing mode.
Playing:the U disk is learned before the power is on. The playing button is pressed to play the
music. It only support MP3 sound format.
B. The usage of A/C adapter
Use only the YONGMEI AC adapter to power your instrument from AC mains. The method to use
the AC adapter is to put one end into the jack at the back of the keyboard and the other end into
the outlet of AC mains.
C. The usage of external terminal ports
External sustain pedal jack: this keyboard with sustain pedal ports, plug the plug into the port it
can take eect.
MIDI connector: this function uses for audio output and other connected installations that have a
MIDI IN function.
Audio line input: this keyboard with stereo function, it support phone, USB music player, computer
or other audio signal input the keyboard to play.
Firstly turn o the keyboard, plug the audio plug into the facility and the other end plug into the
keyboard and then turn on the keyboard.
Microphone input: Plug the microphone plug into the port, than you can use while playing the
keyboard.
Line out:Insert the plug of the speaker into [speaker] socket, and the performance eect will be
enhanced.
Earphone output:Plug the earphone plug into the port, in order to avoid inuencing other people
while the keyboard is learned.
III. The Function Operation
Press the button [power switch] then you can start playing when the number 120 appears on LCD.
1. Basic performance
Volume controlling
(1)Master volume control:16 grades in all, 12 grades is the default opening volume, press the
button [+/-] to turn up or turn down the volume.
(2)Chord volume:10 grades in all,controlling the volume of chord rhythm.
(3)Rhythm volume:10 grades in all, adjust the volume of keyboard percussion music.
(4)Press the button [+/-] no loosen for 2 seconds, you can turn up or turn down the volume
quickly.Press the button [+/-] at the same time for 2 seconds,the volume restore the default values.
(5)Timbre selection: in usual mode, press the button [timbre] then you can choose the timbre,300
timbres for selection. The number 000 piano is the opening default timbre.Press the button [+/-] or
3 numbers to choose the timbre.
(6）Keyboard percussion music:press the button [keyboard percussion music] at this time the
keyboard turn into the keyboard percussion music,each pair of them has corresponding relation.
Press the button again to quit the function.
2. Auto accompaniment
(1)Rhythms selection
300 rhythms in all to choose, in usual mode, press the button [timbre] to start this function,the
number 00 is the default opening rhythm. Press 3 number key or [+/-] to choose the rhythm.
(2) Rhythms start and stop
Press the button [start/stop] to start this function, the beat with the light, press the button again to
quit this function.
(3) Fill-in,prelude and postlude
In rhythm playing mode,press the button [ll-in] to play the rhythm , after the
rhythm press the button [prelude/postlude] to enter the prelude mode, after tho
prelude playing mode will go into the postlude playing mode automatically.
(4) Sync function
Press the button [sync] to start the sync function, at this time press the 19 bass button, the rhythm
will be played, and quit the sync function at the same time.
(5) Tempo function
Press the button [metronome] to start the metronome with a sound“dida", playing with a tempo
eect. Press the button continuously, 1/4, 2/4, 3/4, 4/4 and stop, four metronome for selection,
press the button the LCD displays " normal" then you can quit the function.
Tempo setting
120 is the opening default tempo, press the button [+/-] to adjust the tempo, the
adjustment scope is between 30 to 240.
3. Auto bass chord
Single nger bass chord
When rhythm is in service, press the button [single nger chord] to start corresponding automatic
accompaniment chord function,at this time you can play with single ngering in the 19 bass button
area with chord accompaniment, press the button again to quit the function. When the rhythm is not
in service. press the button [single nger chord] to start the single nger chord function, at this time
you can play with single nger chord, press the button again to quit the function.
Multi-nger chord
When rhythm is in service. press the button [multi- nger chord] to start the auto bass chord, at this
time you can play with multi ngering in the 19 bass button area with chord accompaniment, Press
the button [multi-nger chord] again or [chord o] to end this function.
Comprehensive chord
When rhythm is in service, press the button [comprehensive chord] to start this function, at this time
you can play with single nger chord or multi-nger chord. Press the button again to quit the
function.
All of these three functions are displayed on LCD to lead you to play the keyboard.
Status register
According the playing need, after adjusted the timbre, rhythm, tempo, press the button[memory] or
[memory 1-4] the playing timbre, rhythm, tempo are renewing the corresponding state of the
system.
4. Eect control
Sustain & vibrato
Press the button [sustain] to enter the sustain function,the endnotes played are lengthened.
Press the button [vibrato] to enter the function, the pitch of the notes vibrates within a limited
range.
When sustain & vibrato is in service LCD will display the instruction.
Rising tone & falling tone
Press the button [transposition] to adjust the tone,it is able to adjust to increase 6 grades or reduce
6 grades. Press the button [+] and [-] at the meantime, the transposition turned into 0, LCD display
the pitch for 3 seconds.
Touch response keyboard
This keyboard with touch response function,is start on default when keyboard is turn on,the
volume is depend on the touch strength, press the button [touch response keyboard] again to quit
this function, LCD will display the instruction.
Split
Press the button [split] the keyboard divide into two areas, at this time LCD displays the second
timbre, press the button [+/-] to change the timbre, press
the button [split] again to quit this function.
Double timbre playing
Press the button [double timbre] to play the notes with combinational two timbres, at this time the
timbres displayed is the second one, press the button [+/-] to change the timbre, press the button
[double timbre] again to quit this function.
Tune function
Press the button [+/-] to adjust the tune, the adjustment scope is -99 to 99.
Demo song
30 demo songs for your selection, please see in attachment 3. Press the button [demo] to play the
demo song cyclically. Press the button [+/-] to choose the demo song.
Teaching function
Press the button [single-key] [follow] or [concert] to enter the corresponding teaching mode,LCD
display the corresponding state.
A.Single-key: the note button is pressed to continue the music, whether or not you play the right
note, you will get the right sound. The song still goes on.
B.Follow:the main melody is shielded it seems like karaoke,the song would not stop, if you do not
play the keyboard for three seconds, the main melody will
renew.
C. Concert:only the note pressed correctly, the song would goes on, the song would played
cyclical, press the [single-key] [follow] or [concert] to quit the function.
Recording
Press the button [record] to go into the function, the notes recorded about 110 notes, the notes
playing will be recorded. Neither ngering nor percussion would be recorded. New notes can be
added till the room is full.When recording is under way. press [playback] to play the recorded notes
one by one, LCD display the corresponding state ,when the room is full the LCD will display“full"
for 4 second , press the [record] button again to quit the function.
Rhythm programming
Press the button [program] to go into the programming mode and the corresponding mode
display on LCD.In the programming mode to edit drums into the keyboard, only one drum can be
edit at a time and drums edited should not exceed the maximum number 32. press a key once to
edit an empty beat more than 32 notes LCD will display “full" for 3 second.In programming mode.
press [program] to end this function and get into normal function, at this time corresponding
mode display on LCD.
In programming mode,press [playback] to play the drums edited cyclically, forming a rhythm of
self- edited style,corresponding state displayed on LCD. In this mode you can choose dierent
timbre to play.
5. With USB music player
Volume [+] and [-]:the volume button is pressed to increase the volume or reduce the volume.
Prev.music/ next .music: the prev button or next button is pressed to select prev music or next
music, the pressing on the two buttons are fast-back or fast-forward.
EQ mode:EQ button is pressed every time, the normal mode, jazz mode, classical mode,popular
mode and rock and roll mode is changed in turn.
Playing mode: the button is pressed for the rst time, and the music in the le is played; the button
is pressed for the second time, and the mode is change into the single-cycle mode.The button is
pressed for the third time, and the mode is change into the random playing mode.
Playing:the U disk is learned before the power is on. The playing button is pressed to play the
music. It only support MP3 sound format.
POWERKE Y
ENGLISH
www.templodosinstrumentos.com.br
MULTI FUNCTION KEYBOARD
KP500
B. The usage of A/C adapter
Use only the YONGMEI AC adapter to power your instrument from AC mains. The method to use
the AC adapter is to put one end into the jack at the back of the keyboard and the other end into
the outlet of AC mains.
C. The usage of external terminal ports
External sustain pedal jack: this keyboard with sustain pedal ports, plug the plug into the port it
can take eect.
MIDI connector: this function uses for audio output and other connected installations that have a
MIDI IN function.
Audio line input: this keyboard with stereo function, it support phone, USB music player, computer
or other audio signal input the keyboard to play.
Firstly turn o the keyboard, plug the audio plug into the facility and the other end plug into the
keyboard and then turn on the keyboard.
Microphone input: Plug the microphone plug into the port, than you can use while playing the
keyboard.
Line out:Insert the plug of the speaker into [speaker] socket, and the performance eect will be
enhanced.
Earphone output:Plug the earphone plug into the port, in order to avoid inuencing other people
while the keyboard is learned.
III. The Function Operation
Press the button [power switch] then you can start playing when the number 120 appears on LCD.
1. Basic performance
Volume controlling
(1)Master volume control:16 grades in all, 12 grades is the default opening volume, press the
button [+/-] to turn up or turn down the volume.
(2)Chord volume:10 grades in all,controlling the volume of chord rhythm.
(3)Rhythm volume:10 grades in all, adjust the volume of keyboard percussion music.
(4)Press the button [+/-] no loosen for 2 seconds, you can turn up or turn down the volume
quickly.Press the button [+/-] at the same time for 2 seconds,the volume restore the default values.
(5)Timbre selection: in usual mode, press the button [timbre] then you can choose the timbre,300
timbres for selection. The number 000 piano is the opening default timbre.Press the button [+/-] or
3 numbers to choose the timbre.
(6）Keyboard percussion music:press the button [keyboard percussion music] at this time the
keyboard turn into the keyboard percussion music,each pair of them has corresponding relation.
Press the button again to quit the function.
2. Auto accompaniment
(1)Rhythms selection
300 rhythms in all to choose, in usual mode, press the button [timbre] to start this function,the
number 00 is the default opening rhythm. Press 3 number key or [+/-] to choose the rhythm.
(2) Rhythms start and stop
Press the button [start/stop] to start this function, the beat with the light, press the button again to
quit this function.
(3) Fill-in,prelude and postlude
In rhythm playing mode,press the button [ll-in] to play the rhythm , after the
rhythm press the button [prelude/postlude] to enter the prelude mode, after tho
prelude playing mode will go into the postlude playing mode automatically.
(4) Sync function
Press the button [sync] to start the sync function, at this time press the 19 bass button, the rhythm
will be played, and quit the sync function at the same time.
(5) Tempo function
Press the button [metronome] to start the metronome with a sound“dida", playing with a tempo
eect. Press the button continuously, 1/4, 2/4, 3/4, 4/4 and stop, four metronome for selection,
press the button the LCD displays " normal" then you can quit the function.
Tempo setting
120 is the opening default tempo, press the button [+/-] to adjust the tempo, the
adjustment scope is between 30 to 240.
3. Auto bass chord
Single nger bass chord
When rhythm is in service, press the button [single nger chord] to start corresponding automatic
accompaniment chord function,at this time you can play with single ngering in the 19 bass button
area with chord accompaniment, press the button again to quit the function. When the rhythm is not
in service. press the button [single nger chord] to start the single nger chord function, at this time
you can play with single nger chord, press the button again to quit the function.
Multi-nger chord
When rhythm is in service. press the button [multi- nger chord] to start the auto bass chord, at this
time you can play with multi ngering in the 19 bass button area with chord accompaniment, Press
the button [multi-nger chord] again or [chord o] to end this function.
Comprehensive chord
When rhythm is in service, press the button [comprehensive chord] to start this function, at this time
you can play with single nger chord or multi-nger chord. Press the button again to quit the
function.
All of these three functions are displayed on LCD to lead you to play the keyboard.
Status register
According the playing need, after adjusted the timbre, rhythm, tempo, press the button[memory] or
[memory 1-4] the playing timbre, rhythm, tempo are renewing the corresponding state of the
system.
4. Eect control
Sustain & vibrato
Press the button [sustain] to enter the sustain function,the endnotes played are lengthened.
Press the button [vibrato] to enter the function, the pitch of the notes vibrates within a limited
range.
When sustain & vibrato is in service LCD will display the instruction.
Rising tone & falling tone
Press the button [transposition] to adjust the tone,it is able to adjust to increase 6 grades or reduce
6 grades. Press the button [+] and [-] at the meantime, the transposition turned into 0, LCD display
the pitch for 3 seconds.
Touch response keyboard
This keyboard with touch response function,is start on default when keyboard is turn on,the
volume is depend on the touch strength, press the button [touch response keyboard] again to quit
this function, LCD will display the instruction.
Split
Press the button [split] the keyboard divide into two areas, at this time LCD displays the second
timbre, press the button [+/-] to change the timbre, press
the button [split] again to quit this function.
Double timbre playing
Press the button [double timbre] to play the notes with combinational two timbres, at this time the
timbres displayed is the second one, press the button [+/-] to change the timbre, press the button
[double timbre] again to quit this function.
Tune function
Press the button [+/-] to adjust the tune, the adjustment scope is -99 to 99.
Demo song
30 demo songs for your selection, please see in attachment 3. Press the button [demo] to play the
demo song cyclically. Press the button [+/-] to choose the demo song.
Teaching function
Press the button [single-key] [follow] or [concert] to enter the corresponding teaching mode,LCD
display the corresponding state.
A.Single-key: the note button is pressed to continue the music, whether or not you play the right
note, you will get the right sound. The song still goes on.
B.Follow:the main melody is shielded it seems like karaoke,the song would not stop, if you do not
play the keyboard for three seconds, the main melody will
renew.
C. Concert:only the note pressed correctly, the song would goes on, the song would played
cyclical, press the [single-key] [follow] or [concert] to quit the function.
Recording
Press the button [record] to go into the function, the notes recorded about 110 notes, the notes
playing will be recorded. Neither ngering nor percussion would be recorded. New notes can be
added till the room is full.When recording is under way. press [playback] to play the recorded notes
one by one, LCD display the corresponding state ,when the room is full the LCD will display“full"
for 4 second , press the [record] button again to quit the function.
Rhythm programming
Press the button [program] to go into the programming mode and the corresponding mode
display on LCD.In the programming mode to edit drums into the keyboard, only one drum can be
edit at a time and drums edited should not exceed the maximum number 32. press a key once to
edit an empty beat more than 32 notes LCD will display “full" for 3 second.In programming mode.
press [program] to end this function and get into normal function, at this time corresponding
mode display on LCD.
In programming mode,press [playback] to play the drums edited cyclically, forming a rhythm of
self- edited style,corresponding state displayed on LCD. In this mode you can choose dierent
timbre to play.
5. With USB music player
Volume [+] and [-]:the volume button is pressed to increase the volume or reduce the volume.
Prev.music/ next .music: the prev button or next button is pressed to select prev music or next
music, the pressing on the two buttons are fast-back or fast-forward.
EQ mode:EQ button is pressed every time, the normal mode, jazz mode, classical mode,popular
mode and rock and roll mode is changed in turn.
Playing mode: the button is pressed for the rst time, and the music in the le is played; the button
is pressed for the second time, and the mode is change into the single-cycle mode.The button is
pressed for the third time, and the mode is change into the random playing mode.
Playing:the U disk is learned before the power is on. The playing button is pressed to play the
music. It only support MP3 sound format.
B. The usage of A/C adapter
Use only the YONGMEI AC adapter to power your instrument from AC mains. The method to use
the AC adapter is to put one end into the jack at the back of the keyboard and the other end into
the outlet of AC mains.
C. The usage of external terminal ports
External sustain pedal jack: this keyboard with sustain pedal ports, plug the plug into the port it
can take eect.
MIDI connector: this function uses for audio output and other connected installations that have a
MIDI IN function.
Audio line input: this keyboard with stereo function, it support phone, USB music player, computer
or other audio signal input the keyboard to play.
Firstly turn o the keyboard, plug the audio plug into the facility and the other end plug into the
keyboard and then turn on the keyboard.
Microphone input: Plug the microphone plug into the port, than you can use while playing the
keyboard.
Line out:Insert the plug of the speaker into [speaker] socket, and the performance eect will be
enhanced.
Earphone output:Plug the earphone plug into the port, in order to avoid inuencing other people
while the keyboard is learned.
III. The Function Operation
Press the button [power switch] then you can start playing when the number 120 appears on LCD.
1. Basic performance
Volume controlling
(1)Master volume control:16 grades in all, 12 grades is the default opening volume, press the
button [+/-] to turn up or turn down the volume.
(2)Chord volume:10 grades in all,controlling the volume of chord rhythm.
(3)Rhythm volume:10 grades in all, adjust the volume of keyboard percussion music.
(4)Press the button [+/-] no loosen for 2 seconds, you can turn up or turn down the volume
quickly.Press the button [+/-] at the same time for 2 seconds,the volume restore the default values.
(5)Timbre selection: in usual mode, press the button [timbre] then you can choose the timbre,300
timbres for selection. The number 000 piano is the opening default timbre.Press the button [+/-] or
3 numbers to choose the timbre.
(6）Keyboard percussion music:press the button [keyboard percussion music] at this time the
keyboard turn into the keyboard percussion music,each pair of them has corresponding relation.
Press the button again to quit the function.
2. Auto accompaniment
(1)Rhythms selection
300 rhythms in all to choose, in usual mode, press the button [timbre] to start this function,the
number 00 is the default opening rhythm. Press 3 number key or [+/-] to choose the rhythm.
(2) Rhythms start and stop
Press the button [start/stop] to start this function, the beat with the light, press the button again to
quit this function.
(3) Fill-in,prelude and postlude
In rhythm playing mode,press the button [ll-in] to play the rhythm , after the
rhythm press the button [prelude/postlude] to enter the prelude mode, after tho
prelude playing mode will go into the postlude playing mode automatically.
(4) Sync function
Press the button [sync] to start the sync function, at this time press the 19 bass button, the rhythm
will be played, and quit the sync function at the same time.
(5) Tempo function
Press the button [metronome] to start the metronome with a sound“dida", playing with a tempo
eect. Press the button continuously, 1/4, 2/4, 3/4, 4/4 and stop, four metronome for selection,
press the button the LCD displays " normal" then you can quit the function.
Tempo setting
120 is the opening default tempo, press the button [+/-] to adjust the tempo, the
adjustment scope is between 30 to 240.
3. Auto bass chord
Single nger bass chord
When rhythm is in service, press the button [single nger chord] to start corresponding automatic
accompaniment chord function,at this time you can play with single ngering in the 19 bass button
area with chord accompaniment, press the button again to quit the function. When the rhythm is not
in service. press the button [single nger chord] to start the single nger chord function, at this time
you can play with single nger chord, press the button again to quit the function.
Multi-nger chord
When rhythm is in service. press the button [multi- nger chord] to start the auto bass chord, at this
time you can play with multi ngering in the 19 bass button area with chord accompaniment, Press
the button [multi-nger chord] again or [chord o] to end this function.
Comprehensive chord
When rhythm is in service, press the button [comprehensive chord] to start this function, at this time
you can play with single nger chord or multi-nger chord. Press the button again to quit the
function.
All of these three functions are displayed on LCD to lead you to play the keyboard.
Status register
According the playing need, after adjusted the timbre, rhythm, tempo, press the button[memory] or
[memory 1-4] the playing timbre, rhythm, tempo are renewing the corresponding state of the
system.
4. Eect control
Sustain & vibrato
Press the button [sustain] to enter the sustain function,the endnotes played are lengthened.
Press the button [vibrato] to enter the function, the pitch of the notes vibrates within a limited
range.
When sustain & vibrato is in service LCD will display the instruction.
Rising tone & falling tone
Press the button [transposition] to adjust the tone,it is able to adjust to increase 6 grades or reduce
6 grades. Press the button [+] and [-] at the meantime, the transposition turned into 0, LCD display
the pitch for 3 seconds.
Touch response keyboard
This keyboard with touch response function,is start on default when keyboard is turn on,the
volume is depend on the touch strength, press the button [touch response keyboard] again to quit
this function, LCD will display the instruction.
Split
Press the button [split] the keyboard divide into two areas, at this time LCD displays the second
timbre, press the button [+/-] to change the timbre, press
the button [split] again to quit this function.
Double timbre playing
Press the button [double timbre] to play the notes with combinational two timbres, at this time the
timbres displayed is the second one, press the button [+/-] to change the timbre, press the button
[double timbre] again to quit this function.
Tune function
Press the button [+/-] to adjust the tune, the adjustment scope is -99 to 99.
Demo song
30 demo songs for your selection, please see in attachment 3. Press the button [demo] to play the
demo song cyclically. Press the button [+/-] to choose the demo song.
Teaching function
Press the button [single-key] [follow] or [concert] to enter the corresponding teaching mode,LCD
display the corresponding state.
A.Single-key: the note button is pressed to continue the music, whether or not you play the right
note, you will get the right sound. The song still goes on.
B.Follow:the main melody is shielded it seems like karaoke,the song would not stop, if you do not
play the keyboard for three seconds, the main melody will
renew.
C. Concert:only the note pressed correctly, the song would goes on, the song would played
cyclical, press the [single-key] [follow] or [concert] to quit the function.
Recording
Press the button [record] to go into the function, the notes recorded about 110 notes, the notes
playing will be recorded. Neither ngering nor percussion would be recorded. New notes can be
added till the room is full.When recording is under way. press [playback] to play the recorded notes
one by one, LCD display the corresponding state ,when the room is full the LCD will display“full"
for 4 second , press the [record] button again to quit the function.
Rhythm programming
Press the button [program] to go into the programming mode and the corresponding mode
display on LCD.In the programming mode to edit drums into the keyboard, only one drum can be
edit at a time and drums edited should not exceed the maximum number 32. press a key once to
edit an empty beat more than 32 notes LCD will display “full" for 3 second.In programming mode.
press [program] to end this function and get into normal function, at this time corresponding
mode display on LCD.
In programming mode,press [playback] to play the drums edited cyclically, forming a rhythm of
self- edited style,corresponding state displayed on LCD. In this mode you can choose dierent
timbre to play.
5. With USB music player
Volume [+] and [-]:the volume button is pressed to increase the volume or reduce the volume.
Prev.music/ next .music: the prev button or next button is pressed to select prev music or next
music, the pressing on the two buttons are fast-back or fast-forward.
EQ mode:EQ button is pressed every time, the normal mode, jazz mode, classical mode,popular
mode and rock and roll mode is changed in turn.
Playing mode: the button is pressed for the rst time, and the music in the le is played; the button
is pressed for the second time, and the mode is change into the single-cycle mode.The button is
pressed for the third time, and the mode is change into the random playing mode.
Playing:the U disk is learned before the power is on. The playing button is pressed to play the
music. It only support MP3 sound format.
Thank you for your purchase of KP500 Electronic Keyboard. It has a strong expressive force with a
beautiful appearance. It provides you with an easy way to learn and play the keyboard. This
keyboard is not only a perfect musical instrument for beginner but also an ideal instrument in
musical education as well as for entertainment. Please read the guide carefully before you use our
product and please keep it for reference.
SPECIAL FEATURE
• 61 Piano-Styled Touch Response Keyboard/LCD Display
• With USB Music Player/USB Music Volume Control
• Support USB Bluetooth Receiver/Audio Input
• 300 Timbres/300 Rhythms/61 Keyboard Percussions Music
• 30 Demo Songs/3 Teaching Modes
• Master Volume Control/Tempo Control/Transposition Control
• Chord Volume Control/Accompaniment Volume Control/Cent Control
• Four-memory Function/MIDI OUT/Metronome/Split/Double Timbres
• Sustain/Vibrato/Record/Program/Playback
• Sync/Start/Stop/Fill-in/Prelude/Postlude
• Single Finger Chord/Multi-Finger Chord/Chord O
• Playing Mode/EQ Mode/AB Reread
• Prev Music or Next Music Select/Touch Response Transformation
• External Power/External Microphone/External Earphone
• External Sustain Pedal/Line Out
PRECAUTION
• The specied adapter is only used. Using the wrong adapter may result in instrument damage and
overheating. If the A/C adapter cord or the plug becomes frayed or is damaged, there is a sudden loss of
sound while the instrument is played and the unusual smells or adapter plug from the outlet,the
instrument must be inspected by qualied technician.
• After the power button is pressed, the power of the keyboard is turned o and the plug must be taken o
in order to avoid burning the internal parts or arising re because of long connection with the power.
• The plastic packing bag must be kept in a safe place in order to avoid the suocation when a kid amuses
itself by putting its head into it.
• The keyboard surface should be kept clean to avoid the eye winkers into the instrument through the small
openings of the switch or gaps between the keys.cleaning the appearance of the keyboard with soft cloth
is necessary at xed time and the keyboard is kept away from water vapor.
• The instrument must not be exposed in the strong sunlight for a long time.
• The keyboard must be put in a dry place when it is not used. Strong vibration or collision is forbidden in
order to avoid the damage of the frame or the internal parts.
• The instrument must be kept away from the acidity or alkaline places and it is forbidden to play the
instrument under the eroding gas circumstance in order to prevent poor contact from circuitry oxidation.
• The electronic keyboard is a precise instrument,any modication may result in malfunction. Once the
failure happens,the keyboard must be taken to a professional after-sale service department or experienced
technicians for maintenance.It is forbidden to dismantle or assemble the components inside the keyboard
at will.
3
B. The usage of A/C adapter
Use only the YONGMEI AC adapter to power your instrument from AC mains. The method to use
the AC adapter is to put one end into the jack at the back of the keyboard and the other end into
the outlet of AC mains.
C. The usage of external terminal ports
External sustain pedal jack: this keyboard with sustain pedal ports, plug the plug into the port it
can take eect.
MIDI connector: this function uses for audio output and other connected installations that have a
MIDI IN function.
Audio line input: this keyboard with stereo function, it support phone, USB music player, computer
or other audio signal input the keyboard to play.
Firstly turn o the keyboard, plug the audio plug into the facility and the other end plug into the
keyboard and then turn on the keyboard.
Microphone input: Plug the microphone plug into the port, than you can use while playing the
keyboard.
Line out:Insert the plug of the speaker into [speaker] socket, and the performance eect will be
enhanced.
Earphone output:Plug the earphone plug into the port, in order to avoid inuencing other people
while the keyboard is learned.
III. The Function Operation
Press the button [power switch] then you can start playing when the number 120 appears on LCD.
1. Basic performance
Volume controlling
(1)Master volume control:16 grades in all, 12 grades is the default opening volume, press the
button [+/-] to turn up or turn down the volume.
(2)Chord volume:10 grades in all,controlling the volume of chord rhythm.
(3)Rhythm volume:10 grades in all, adjust the volume of keyboard percussion music.
(4)Press the button [+/-] no loosen for 2 seconds, you can turn up or turn down the volume
quickly.Press the button [+/-] at the same time for 2 seconds,the volume restore the default values.
(5)Timbre selection: in usual mode, press the button [timbre] then you can choose the timbre,300
timbres for selection. The number 000 piano is the opening default timbre.Press the button [+/-] or
3 numbers to choose the timbre.
(6）Keyboard percussion music:press the button [keyboard percussion music] at this time the
keyboard turn into the keyboard percussion music,each pair of them has corresponding relation.
Press the button again to quit the function.
2. Auto accompaniment
(1)Rhythms selection
300 rhythms in all to choose, in usual mode, press the button [timbre] to start this function,the
number 00 is the default opening rhythm. Press 3 number key or [+/-] to choose the rhythm.
(2) Rhythms start and stop
Press the button [start/stop] to start this function, the beat with the light, press the button again to
quit this function.
(3) Fill-in,prelude and postlude
In rhythm playing mode,press the button [ll-in] to play the rhythm , after the
rhythm press the button [prelude/postlude] to enter the prelude mode, after tho
prelude playing mode will go into the postlude playing mode automatically.
(4) Sync function
Press the button [sync] to start the sync function, at this time press the 19 bass button, the rhythm
will be played, and quit the sync function at the same time.
(5) Tempo function
Press the button [metronome] to start the metronome with a sound“dida", playing with a tempo
eect. Press the button continuously, 1/4, 2/4, 3/4, 4/4 and stop, four metronome for selection,
press the button the LCD displays " normal" then you can quit the function.
Tempo setting
120 is the opening default tempo, press the button [+/-] to adjust the tempo, the
adjustment scope is between 30 to 240.
3. Auto bass chord
Single nger bass chord
When rhythm is in service, press the button [single nger chord] to start corresponding automatic
accompaniment chord function,at this time you can play with single ngering in the 19 bass button
area with chord accompaniment, press the button again to quit the function. When the rhythm is not
in service. press the button [single nger chord] to start the single nger chord function, at this time
you can play with single nger chord, press the button again to quit the function.
Multi-nger chord
When rhythm is in service. press the button [multi- nger chord] to start the auto bass chord, at this
time you can play with multi ngering in the 19 bass button area with chord accompaniment, Press
the button [multi-nger chord] again or [chord o] to end this function.
Comprehensive chord
When rhythm is in service, press the button [comprehensive chord] to start this function, at this time
you can play with single nger chord or multi-nger chord. Press the button again to quit the
function.
All of these three functions are displayed on LCD to lead you to play the keyboard.
Status register
According the playing need, after adjusted the timbre, rhythm, tempo, press the button[memory] or
[memory 1-4] the playing timbre, rhythm, tempo are renewing the corresponding state of the
system.
4. Eect control
Sustain & vibrato
Press the button [sustain] to enter the sustain function,the endnotes played are lengthened.
Press the button [vibrato] to enter the function, the pitch of the notes vibrates within a limited
range.
When sustain & vibrato is in service LCD will display the instruction.
Rising tone & falling tone
Press the button [transposition] to adjust the tone,it is able to adjust to increase 6 grades or reduce
6 grades. Press the button [+] and [-] at the meantime, the transposition turned into 0, LCD display
the pitch for 3 seconds.
Touch response keyboard
This keyboard with touch response function,is start on default when keyboard is turn on,the
volume is depend on the touch strength, press the button [touch response keyboard] again to quit
this function, LCD will display the instruction.
Split
Press the button [split] the keyboard divide into two areas, at this time LCD displays the second
timbre, press the button [+/-] to change the timbre, press
the button [split] again to quit this function.
Double timbre playing
Press the button [double timbre] to play the notes with combinational two timbres, at this time the
timbres displayed is the second one, press the button [+/-] to change the timbre, press the button
[double timbre] again to quit this function.
Tune function
Press the button [+/-] to adjust the tune, the adjustment scope is -99 to 99.
Demo song
30 demo songs for your selection, please see in attachment 3. Press the button [demo] to play the
demo song cyclically. Press the button [+/-] to choose the demo song.
Teaching function
Press the button [single-key] [follow] or [concert] to enter the corresponding teaching mode,LCD
display the corresponding state.
A.Single-key: the note button is pressed to continue the music, whether or not you play the right
note, you will get the right sound. The song still goes on.
B.Follow:the main melody is shielded it seems like karaoke,the song would not stop, if you do not
play the keyboard for three seconds, the main melody will
renew.
C. Concert:only the note pressed correctly, the song would goes on, the song would played
cyclical, press the [single-key] [follow] or [concert] to quit the function.
Recording
Press the button [record] to go into the function, the notes recorded about 110 notes, the notes
playing will be recorded. Neither ngering nor percussion would be recorded. New notes can be
added till the room is full.When recording is under way. press [playback] to play the recorded notes
one by one, LCD display the corresponding state ,when the room is full the LCD will display“full"
for 4 second , press the [record] button again to quit the function.
Rhythm programming
Press the button [program] to go into the programming mode and the corresponding mode
display on LCD.In the programming mode to edit drums into the keyboard, only one drum can be
edit at a time and drums edited should not exceed the maximum number 32. press a key once to
edit an empty beat more than 32 notes LCD will display “full" for 3 second.In programming mode.
press [program] to end this function and get into normal function, at this time corresponding
mode display on LCD.
In programming mode,press [playback] to play the drums edited cyclically, forming a rhythm of
self- edited style,corresponding state displayed on LCD. In this mode you can choose dierent
timbre to play.
5. With USB music player
Volume [+] and [-]:the volume button is pressed to increase the volume or reduce the volume.
Prev.music/ next .music: the prev button or next button is pressed to select prev music or next
music, the pressing on the two buttons are fast-back or fast-forward.
EQ mode:EQ button is pressed every time, the normal mode, jazz mode, classical mode,popular
mode and rock and roll mode is changed in turn.
Playing mode: the button is pressed for the rst time, and the music in the le is played; the button
is pressed for the second time, and the mode is change into the single-cycle mode.The button is
pressed for the third time, and the mode is change into the random playing mode.
Playing:the U disk is learned before the power is on. The playing button is pressed to play the
music. It only support MP3 sound format.
I. I. Panel Controlling Button and External Terminal Ports
1. Panel controlling button
External jack in the back of the keyboard
II. The Playing Preparation
POWER
A.The usage of battery
Open the battery compartment cover on the bottom of the keyboard,
insert 8 sizes (1.5v) batteries, the same polarities as the sign shown on
the bottom, replace the cover.
After the battery is exhausted and the voltage reaches a range of value, the keyboard is
unsounded or timbre sound get lost.
The battery (8 sizes) must be changed. If the battery is not used for a long time, the batteries must
be taken out to avoid component damage.
1) Power Switch
2) Master Volume Adjust
3) Accompaniment
Volume Adjust
4) Chord Volume Adjust
5) Tempo Adjust
6) Transposition Adjust
7) Tune Adjust
8) 4Memory Function
9) Midi out
10) Metronome
11) Song
12) Timbre
13) Rhythm
14) Record
15) Playback
16) Program
17) Touch Response
Keyboard
18) Sustain
19) Vibrato
20) Number Select
Keyboard
21) Start/Stop
22) Single Finger Chord
23) Sync
24) Multi-Finger Chord
25) Fill-in
26) Comprehensive Chord
27) Prelude/Postlude
28) Chord O
29) Keyboard Percussion
30) Demo
31) Teaching1:Single-keyboard
32) Teaching2:Follow
33) Teaching3: Concert
34) Split
35) Double Timbre
36) Volume Adjust
37) Playing Mode
38) EQ Mode
39) Play/Pause
40) AB Reread
41) Prev/Next Music Select
42) USB Jack
43) SUSTAIN: External Sustain Pedal Output Jack
44) MIDI: MIDI Jack
45) AUDIO INPUT: Line Input Jack
46) MIC: Microphone Jack
47) OUT: Line Input Jack
48) PHONES: Earphone Jack
49) DC 12V JACK
4
B. The usage of A/C adapter
Use only the YONGMEI AC adapter to power your instrument from AC mains. The method to use
the AC adapter is to put one end into the jack at the back of the keyboard and the other end into
the outlet of AC mains.
C. The usage of external terminal ports
External sustain pedal jack: this keyboard with sustain pedal ports, plug the plug into the port it
can take eect.
MIDI connector: this function uses for audio output and other connected installations that have a
MIDI IN function.
Audio line input: this keyboard with stereo function, it support phone, USB music player, computer
or other audio signal input the keyboard to play.
Firstly turn o the keyboard, plug the audio plug into the facility and the other end plug into the
keyboard and then turn on the keyboard.
Microphone input: Plug the microphone plug into the port, than you can use while playing the
keyboard.
Line out:Insert the plug of the speaker into [speaker] socket, and the performance eect will be
enhanced.
Earphone output:Plug the earphone plug into the port, in order to avoid inuencing other people
while the keyboard is learned.
III. The Function Operation
Press the button [power switch] then you can start playing when the number 120 appears on LCD.
1. Basic performance
Volume controlling
(1)Master volume control:16 grades in all, 12 grades is the default opening volume, press the
button [+/-] to turn up or turn down the volume.
(2)Chord volume:10 grades in all,controlling the volume of chord rhythm.
(3)Rhythm volume:10 grades in all, adjust the volume of keyboard percussion music.
(4)Press the button [+/-] no loosen for 2 seconds, you can turn up or turn down the volume
quickly.Press the button [+/-] at the same time for 2 seconds,the volume restore the default values.
(5)Timbre selection: in usual mode, press the button [timbre] then you can choose the timbre,300
timbres for selection. The number 000 piano is the opening default timbre.Press the button [+/-] or
3 numbers to choose the timbre.
(6）Keyboard percussion music:press the button [keyboard percussion music] at this time the
keyboard turn into the keyboard percussion music,each pair of them has corresponding relation.
Press the button again to quit the function.
2. Auto accompaniment
(1)Rhythms selection
300 rhythms in all to choose, in usual mode, press the button [timbre] to start this function,the
number 00 is the default opening rhythm. Press 3 number key or [+/-] to choose the rhythm.
(2) Rhythms start and stop
Press the button [start/stop] to start this function, the beat with the light, press the button again to
quit this function.
(3) Fill-in,prelude and postlude
In rhythm playing mode,press the button [ll-in] to play the rhythm , after the
rhythm press the button [prelude/postlude] to enter the prelude mode, after tho
prelude playing mode will go into the postlude playing mode automatically.
(4) Sync function
Press the button [sync] to start the sync function, at this time press the 19 bass button, the rhythm
will be played, and quit the sync function at the same time.
(5) Tempo function
Press the button [metronome] to start the metronome with a sound“dida", playing with a tempo
eect. Press the button continuously, 1/4, 2/4, 3/4, 4/4 and stop, four metronome for selection,
press the button the LCD displays " normal" then you can quit the function.
Tempo setting
120 is the opening default tempo, press the button [+/-] to adjust the tempo, the
adjustment scope is between 30 to 240.
3. Auto bass chord
Single nger bass chord
When rhythm is in service, press the button [single nger chord] to start corresponding automatic
accompaniment chord function,at this time you can play with single ngering in the 19 bass button
area with chord accompaniment, press the button again to quit the function. When the rhythm is not
in service. press the button [single nger chord] to start the single nger chord function, at this time
you can play with single nger chord, press the button again to quit the function.
Multi-nger chord
When rhythm is in service. press the button [multi- nger chord] to start the auto bass chord, at this
time you can play with multi ngering in the 19 bass button area with chord accompaniment, Press
the button [multi-nger chord] again or [chord o] to end this function.
Comprehensive chord
When rhythm is in service, press the button [comprehensive chord] to start this function, at this time
you can play with single nger chord or multi-nger chord. Press the button again to quit the
function.
All of these three functions are displayed on LCD to lead you to play the keyboard.
Status register
According the playing need, after adjusted the timbre, rhythm, tempo, press the button[memory] or
[memory 1-4] the playing timbre, rhythm, tempo are renewing the corresponding state of the
system.
4. Eect control
Sustain & vibrato
Press the button [sustain] to enter the sustain function,the endnotes played are lengthened.
Press the button [vibrato] to enter the function, the pitch of the notes vibrates within a limited
range.
When sustain & vibrato is in service LCD will display the instruction.
Rising tone & falling tone
Press the button [transposition] to adjust the tone,it is able to adjust to increase 6 grades or reduce
6 grades. Press the button [+] and [-] at the meantime, the transposition turned into 0, LCD display
the pitch for 3 seconds.
Touch response keyboard
This keyboard with touch response function,is start on default when keyboard is turn on,the
volume is depend on the touch strength, press the button [touch response keyboard] again to quit
this function, LCD will display the instruction.
Split
Press the button [split] the keyboard divide into two areas, at this time LCD displays the second
timbre, press the button [+/-] to change the timbre, press
the button [split] again to quit this function.
Double timbre playing
Press the button [double timbre] to play the notes with combinational two timbres, at this time the
timbres displayed is the second one, press the button [+/-] to change the timbre, press the button
[double timbre] again to quit this function.
Tune function
Press the button [+/-] to adjust the tune, the adjustment scope is -99 to 99.
Demo song
30 demo songs for your selection, please see in attachment 3. Press the button [demo] to play the
demo song cyclically. Press the button [+/-] to choose the demo song.
Teaching function
Press the button [single-key] [follow] or [concert] to enter the corresponding teaching mode,LCD
display the corresponding state.
A.Single-key: the note button is pressed to continue the music, whether or not you play the right
note, you will get the right sound. The song still goes on.
B.Follow:the main melody is shielded it seems like karaoke,the song would not stop, if you do not
play the keyboard for three seconds, the main melody will
renew.
C. Concert:only the note pressed correctly, the song would goes on, the song would played
cyclical, press the [single-key] [follow] or [concert] to quit the function.
Recording
Press the button [record] to go into the function, the notes recorded about 110 notes, the notes
playing will be recorded. Neither ngering nor percussion would be recorded. New notes can be
added till the room is full.When recording is under way. press [playback] to play the recorded notes
one by one, LCD display the corresponding state ,when the room is full the LCD will display“full"
for 4 second , press the [record] button again to quit the function.
Rhythm programming
Press the button [program] to go into the programming mode and the corresponding mode
display on LCD.In the programming mode to edit drums into the keyboard, only one drum can be
edit at a time and drums edited should not exceed the maximum number 32. press a key once to
edit an empty beat more than 32 notes LCD will display “full" for 3 second.In programming mode.
press [program] to end this function and get into normal function, at this time corresponding
mode display on LCD.
In programming mode,press [playback] to play the drums edited cyclically, forming a rhythm of
self- edited style,corresponding state displayed on LCD. In this mode you can choose dierent
timbre to play.
5. With USB music player
Volume [+] and [-]:the volume button is pressed to increase the volume or reduce the volume.
Prev.music/ next .music: the prev button or next button is pressed to select prev music or next
music, the pressing on the two buttons are fast-back or fast-forward.
EQ mode:EQ button is pressed every time, the normal mode, jazz mode, classical mode,popular
mode and rock and roll mode is changed in turn.
Playing mode: the button is pressed for the rst time, and the music in the le is played; the button
is pressed for the second time, and the mode is change into the single-cycle mode.The button is
pressed for the third time, and the mode is change into the random playing mode.
Playing:the U disk is learned before the power is on. The playing button is pressed to play the
music. It only support MP3 sound format.
5
B. The usage of A/C adapter
Use only the YONGMEI AC adapter to power your instrument from AC mains. The method to use
the AC adapter is to put one end into the jack at the back of the keyboard and the other end into
the outlet of AC mains.
C. The usage of external terminal ports
External sustain pedal jack: this keyboard with sustain pedal ports, plug the plug into the port it
can take eect.
MIDI connector: this function uses for audio output and other connected installations that have a
MIDI IN function.
Audio line input: this keyboard with stereo function, it support phone, USB music player, computer
or other audio signal input the keyboard to play.
Firstly turn o the keyboard, plug the audio plug into the facility and the other end plug into the
keyboard and then turn on the keyboard.
Microphone input: Plug the microphone plug into the port, than you can use while playing the
keyboard.
Line out:Insert the plug of the speaker into [speaker] socket, and the performance eect will be
enhanced.
Earphone output:Plug the earphone plug into the port, in order to avoid inuencing other people
while the keyboard is learned.
III. The Function Operation
Press the button [power switch] then you can start playing when the number 120 appears on LCD.
1. Basic performance
Volume controlling
(1)Master volume control:16 grades in all, 12 grades is the default opening volume, press the
button [+/-] to turn up or turn down the volume.
(2)Chord volume:10 grades in all,controlling the volume of chord rhythm.
(3)Rhythm volume:10 grades in all, adjust the volume of keyboard percussion music.
(4)Press the button [+/-] no loosen for 2 seconds, you can turn up or turn down the volume
quickly.Press the button [+/-] at the same time for 2 seconds,the volume restore the default values.
(5)Timbre selection: in usual mode, press the button [timbre] then you can choose the timbre,300
timbres for selection. The number 000 piano is the opening default timbre.Press the button [+/-] or
3 numbers to choose the timbre.
(6）Keyboard percussion music:press the button [keyboard percussion music] at this time the
keyboard turn into the keyboard percussion music,each pair of them has corresponding relation.
Press the button again to quit the function.
2. Auto accompaniment
(1)Rhythms selection
300 rhythms in all to choose, in usual mode, press the button [timbre] to start this function,the
number 00 is the default opening rhythm. Press 3 number key or [+/-] to choose the rhythm.
(2) Rhythms start and stop
Press the button [start/stop] to start this function, the beat with the light, press the button again to
quit this function.
(3) Fill-in,prelude and postlude
In rhythm playing mode,press the button [ll-in] to play the rhythm , after the
rhythm press the button [prelude/postlude] to enter the prelude mode, after tho
prelude playing mode will go into the postlude playing mode automatically.
(4) Sync function
Press the button [sync] to start the sync function, at this time press the 19 bass button, the rhythm
will be played, and quit the sync function at the same time.
(5) Tempo function
Press the button [metronome] to start the metronome with a sound“dida", playing with a tempo
eect. Press the button continuously, 1/4, 2/4, 3/4, 4/4 and stop, four metronome for selection,
press the button the LCD displays " normal" then you can quit the function.
Tempo setting
120 is the opening default tempo, press the button [+/-] to adjust the tempo, the
adjustment scope is between 30 to 240.
3. Auto bass chord
Single nger bass chord
When rhythm is in service, press the button [single nger chord] to start corresponding automatic
accompaniment chord function,at this time you can play with single ngering in the 19 bass button
area with chord accompaniment, press the button again to quit the function. When the rhythm is not
in service. press the button [single nger chord] to start the single nger chord function, at this time
you can play with single nger chord, press the button again to quit the function.
Multi-nger chord
When rhythm is in service. press the button [multi- nger chord] to start the auto bass chord, at this
time you can play with multi ngering in the 19 bass button area with chord accompaniment, Press
the button [multi-nger chord] again or [chord o] to end this function.
Comprehensive chord
When rhythm is in service, press the button [comprehensive chord] to start this function, at this time
you can play with single nger chord or multi-nger chord. Press the button again to quit the
function.
All of these three functions are displayed on LCD to lead you to play the keyboard.
Status register
According the playing need, after adjusted the timbre, rhythm, tempo, press the button[memory] or
[memory 1-4] the playing timbre, rhythm, tempo are renewing the corresponding state of the
system.
4. Eect control
Sustain & vibrato
Press the button [sustain] to enter the sustain function,the endnotes played are lengthened.
Press the button [vibrato] to enter the function, the pitch of the notes vibrates within a limited
range.
When sustain & vibrato is in service LCD will display the instruction.
Rising tone & falling tone
Press the button [transposition] to adjust the tone,it is able to adjust to increase 6 grades or reduce
6 grades. Press the button [+] and [-] at the meantime, the transposition turned into 0, LCD display
the pitch for 3 seconds.
Touch response keyboard
This keyboard with touch response function,is start on default when keyboard is turn on,the
volume is depend on the touch strength, press the button [touch response keyboard] again to quit
this function, LCD will display the instruction.
Split
Press the button [split] the keyboard divide into two areas, at this time LCD displays the second
timbre, press the button [+/-] to change the timbre, press
the button [split] again to quit this function.
Double timbre playing
Press the button [double timbre] to play the notes with combinational two timbres, at this time the
timbres displayed is the second one, press the button [+/-] to change the timbre, press the button
[double timbre] again to quit this function.
Tune function
Press the button [+/-] to adjust the tune, the adjustment scope is -99 to 99.
Demo song
30 demo songs for your selection, please see in attachment 3. Press the button [demo] to play the
demo song cyclically. Press the button [+/-] to choose the demo song.
Teaching function
Press the button [single-key] [follow] or [concert] to enter the corresponding teaching mode,LCD
display the corresponding state.
A.Single-key: the note button is pressed to continue the music, whether or not you play the right
note, you will get the right sound. The song still goes on.
B.Follow:the main melody is shielded it seems like karaoke,the song would not stop, if you do not
play the keyboard for three seconds, the main melody will
renew.
C. Concert:only the note pressed correctly, the song would goes on, the song would played
cyclical, press the [single-key] [follow] or [concert] to quit the function.
Recording
Press the button [record] to go into the function, the notes recorded about 110 notes, the notes
playing will be recorded. Neither ngering nor percussion would be recorded. New notes can be
added till the room is full.When recording is under way. press [playback] to play the recorded notes
one by one, LCD display the corresponding state ,when the room is full the LCD will display“full"
for 4 second , press the [record] button again to quit the function.
Rhythm programming
Press the button [program] to go into the programming mode and the corresponding mode
display on LCD.In the programming mode to edit drums into the keyboard, only one drum can be
edit at a time and drums edited should not exceed the maximum number 32. press a key once to
edit an empty beat more than 32 notes LCD will display “full" for 3 second.In programming mode.
press [program] to end this function and get into normal function, at this time corresponding
mode display on LCD.
In programming mode,press [playback] to play the drums edited cyclically, forming a rhythm of
self- edited style,corresponding state displayed on LCD. In this mode you can choose dierent
timbre to play.
5. With USB music player
Volume [+] and [-]:the volume button is pressed to increase the volume or reduce the volume.
Prev.music/ next .music: the prev button or next button is pressed to select prev music or next
music, the pressing on the two buttons are fast-back or fast-forward.
EQ mode:EQ button is pressed every time, the normal mode, jazz mode, classical mode,popular
mode and rock and roll mode is changed in turn.
Playing mode: the button is pressed for the rst time, and the music in the le is played; the button
is pressed for the second time, and the mode is change into the single-cycle mode.The button is
pressed for the third time, and the mode is change into the random playing mode.
Playing:the U disk is learned before the power is on. The playing button is pressed to play the
music. It only support MP3 sound format.
6
B. The usage of A/C adapter
Use only the YONGMEI AC adapter to power your instrument from AC mains. The method to use
the AC adapter is to put one end into the jack at the back of the keyboard and the other end into
the outlet of AC mains.
C. The usage of external terminal ports
External sustain pedal jack: this keyboard with sustain pedal ports, plug the plug into the port it
can take eect.
MIDI connector: this function uses for audio output and other connected installations that have a
MIDI IN function.
Audio line input: this keyboard with stereo function, it support phone, USB music player, computer
or other audio signal input the keyboard to play.
Firstly turn o the keyboard, plug the audio plug into the facility and the other end plug into the
keyboard and then turn on the keyboard.
Microphone input: Plug the microphone plug into the port, than you can use while playing the
keyboard.
Line out:Insert the plug of the speaker into [speaker] socket, and the performance eect will be
enhanced.
Earphone output:Plug the earphone plug into the port, in order to avoid inuencing other people
while the keyboard is learned.
III. The Function Operation
Press the button [power switch] then you can start playing when the number 120 appears on LCD.
1. Basic performance
Volume controlling
(1)Master volume control:16 grades in all, 12 grades is the default opening volume, press the
button [+/-] to turn up or turn down the volume.
(2)Chord volume:10 grades in all,controlling the volume of chord rhythm.
(3)Rhythm volume:10 grades in all, adjust the volume of keyboard percussion music.
(4)Press the button [+/-] no loosen for 2 seconds, you can turn up or turn down the volume
quickly.Press the button [+/-] at the same time for 2 seconds,the volume restore the default values.
(5)Timbre selection: in usual mode, press the button [timbre] then you can choose the timbre,300
timbres for selection. The number 000 piano is the opening default timbre.Press the button [+/-] or
3 numbers to choose the timbre.
(6）Keyboard percussion music:press the button [keyboard percussion music] at this time the
keyboard turn into the keyboard percussion music,each pair of them has corresponding relation.
Press the button again to quit the function.
2. Auto accompaniment
(1)Rhythms selection
300 rhythms in all to choose, in usual mode, press the button [timbre] to start this function,the
number 00 is the default opening rhythm. Press 3 number key or [+/-] to choose the rhythm.
(2) Rhythms start and stop
Press the button [start/stop] to start this function, the beat with the light, press the button again to
quit this function.
(3) Fill-in,prelude and postlude
In rhythm playing mode,press the button [ll-in] to play the rhythm , after the
rhythm press the button [prelude/postlude] to enter the prelude mode, after tho
prelude playing mode will go into the postlude playing mode automatically.
(4) Sync function
Press the button [sync] to start the sync function, at this time press the 19 bass button, the rhythm
will be played, and quit the sync function at the same time.
(5) Tempo function
Press the button [metronome] to start the metronome with a sound“dida", playing with a tempo
eect. Press the button continuously, 1/4, 2/4, 3/4, 4/4 and stop, four metronome for selection,
press the button the LCD displays " normal" then you can quit the function.
Tempo setting
120 is the opening default tempo, press the button [+/-] to adjust the tempo, the
adjustment scope is between 30 to 240.
3. Auto bass chord
Single nger bass chord
When rhythm is in service, press the button [single nger chord] to start corresponding automatic
accompaniment chord function,at this time you can play with single ngering in the 19 bass button
area with chord accompaniment, press the button again to quit the function. When the rhythm is not
in service. press the button [single nger chord] to start the single nger chord function, at this time
you can play with single nger chord, press the button again to quit the function.
Multi-nger chord
When rhythm is in service. press the button [multi- nger chord] to start the auto bass chord, at this
time you can play with multi ngering in the 19 bass button area with chord accompaniment, Press
the button [multi-nger chord] again or [chord o] to end this function.
Comprehensive chord
When rhythm is in service, press the button [comprehensive chord] to start this function, at this time
you can play with single nger chord or multi-nger chord. Press the button again to quit the
function.
All of these three functions are displayed on LCD to lead you to play the keyboard.
Status register
According the playing need, after adjusted the timbre, rhythm, tempo, press the button[memory] or
[memory 1-4] the playing timbre, rhythm, tempo are renewing the corresponding state of the
system.
4. Eect control
Sustain & vibrato
Press the button [sustain] to enter the sustain function,the endnotes played are lengthened.
Press the button [vibrato] to enter the function, the pitch of the notes vibrates within a limited
range.
When sustain & vibrato is in service LCD will display the instruction.
Rising tone & falling tone
Press the button [transposition] to adjust the tone,it is able to adjust to increase 6 grades or reduce
6 grades. Press the button [+] and [-] at the meantime, the transposition turned into 0, LCD display
the pitch for 3 seconds.
Touch response keyboard
This keyboard with touch response function,is start on default when keyboard is turn on,the
volume is depend on the touch strength, press the button [touch response keyboard] again to quit
this function, LCD will display the instruction.
Split
Press the button [split] the keyboard divide into two areas, at this time LCD displays the second
timbre, press the button [+/-] to change the timbre, press
the button [split] again to quit this function.
Double timbre playing
Press the button [double timbre] to play the notes with combinational two timbres, at this time the
timbres displayed is the second one, press the button [+/-] to change the timbre, press the button
[double timbre] again to quit this function.
Tune function
Press the button [+/-] to adjust the tune, the adjustment scope is -99 to 99.
Demo song
30 demo songs for your selection, please see in attachment 3. Press the button [demo] to play the
demo song cyclically. Press the button [+/-] to choose the demo song.
Teaching function
Press the button [single-key] [follow] or [concert] to enter the corresponding teaching mode,LCD
display the corresponding state.
A.Single-key: the note button is pressed to continue the music, whether or not you play the right
note, you will get the right sound. The song still goes on.
B.Follow:the main melody is shielded it seems like karaoke,the song would not stop, if you do not
play the keyboard for three seconds, the main melody will
renew.
C. Concert:only the note pressed correctly, the song would goes on, the song would played
cyclical, press the [single-key] [follow] or [concert] to quit the function.
Recording
Press the button [record] to go into the function, the notes recorded about 110 notes, the notes
playing will be recorded. Neither ngering nor percussion would be recorded. New notes can be
added till the room is full.When recording is under way. press [playback] to play the recorded notes
one by one, LCD display the corresponding state ,when the room is full the LCD will display“full"
for 4 second , press the [record] button again to quit the function.
Rhythm programming
Press the button [program] to go into the programming mode and the corresponding mode
display on LCD.In the programming mode to edit drums into the keyboard, only one drum can be
edit at a time and drums edited should not exceed the maximum number 32. press a key once to
edit an empty beat more than 32 notes LCD will display “full" for 3 second.In programming mode.
press [program] to end this function and get into normal function, at this time corresponding
mode display on LCD.
In programming mode,press [playback] to play the drums edited cyclically, forming a rhythm of
self- edited style,corresponding state displayed on LCD. In this mode you can choose dierent
timbre to play.
5. With USB music player
Volume [+] and [-]:the volume button is pressed to increase the volume or reduce the volume.
Prev.music/ next .music: the prev button or next button is pressed to select prev music or next
music, the pressing on the two buttons are fast-back or fast-forward.
EQ mode:EQ button is pressed every time, the normal mode, jazz mode, classical mode,popular
mode and rock and roll mode is changed in turn.
Playing mode: the button is pressed for the rst time, and the music in the le is played; the button
is pressed for the second time, and the mode is change into the single-cycle mode.The button is
pressed for the third time, and the mode is change into the random playing mode.
Playing:the U disk is learned before the power is on. The playing button is pressed to play the
music. It only support MP3 sound format.
7
B. The usage of A/C adapter
Use only the YONGMEI AC adapter to power your instrument from AC mains. The method to use
the AC adapter is to put one end into the jack at the back of the keyboard and the other end into
the outlet of AC mains.
C. The usage of external terminal ports
External sustain pedal jack: this keyboard with sustain pedal ports, plug the plug into the port it
can take eect.
MIDI connector: this function uses for audio output and other connected installations that have a
MIDI IN function.
Audio line input: this keyboard with stereo function, it support phone, USB music player, computer
or other audio signal input the keyboard to play.
Firstly turn o the keyboard, plug the audio plug into the facility and the other end plug into the
keyboard and then turn on the keyboard.
Microphone input: Plug the microphone plug into the port, than you can use while playing the
keyboard.
Line out:Insert the plug of the speaker into [speaker] socket, and the performance eect will be
enhanced.
Earphone output:Plug the earphone plug into the port, in order to avoid inuencing other people
while the keyboard is learned.
III. The Function Operation
Press the button [power switch] then you can start playing when the number 120 appears on LCD.
1. Basic performance
Volume controlling
(1)Master volume control:16 grades in all, 12 grades is the default opening volume, press the
button [+/-] to turn up or turn down the volume.
(2)Chord volume:10 grades in all,controlling the volume of chord rhythm.
(3)Rhythm volume:10 grades in all, adjust the volume of keyboard percussion music.
(4)Press the button [+/-] no loosen for 2 seconds, you can turn up or turn down the volume
quickly.Press the button [+/-] at the same time for 2 seconds,the volume restore the default values.
(5)Timbre selection: in usual mode, press the button [timbre] then you can choose the timbre,300
timbres for selection. The number 000 piano is the opening default timbre.Press the button [+/-] or
3 numbers to choose the timbre.
(6）Keyboard percussion music:press the button [keyboard percussion music] at this time the
keyboard turn into the keyboard percussion music,each pair of them has corresponding relation.
Press the button again to quit the function.
2. Auto accompaniment
(1)Rhythms selection
300 rhythms in all to choose, in usual mode, press the button [timbre] to start this function,the
number 00 is the default opening rhythm. Press 3 number key or [+/-] to choose the rhythm.
(2) Rhythms start and stop
Press the button [start/stop] to start this function, the beat with the light, press the button again to
quit this function.
(3) Fill-in,prelude and postlude
In rhythm playing mode,press the button [ll-in] to play the rhythm , after the
rhythm press the button [prelude/postlude] to enter the prelude mode, after tho
prelude playing mode will go into the postlude playing mode automatically.
(4) Sync function
Press the button [sync] to start the sync function, at this time press the 19 bass button, the rhythm
will be played, and quit the sync function at the same time.
(5) Tempo function
Press the button [metronome] to start the metronome with a sound“dida", playing with a tempo
eect. Press the button continuously, 1/4, 2/4, 3/4, 4/4 and stop, four metronome for selection,
press the button the LCD displays " normal" then you can quit the function.
Tempo setting
120 is the opening default tempo, press the button [+/-] to adjust the tempo, the
adjustment scope is between 30 to 240.
3. Auto bass chord
Single nger bass chord
When rhythm is in service, press the button [single nger chord] to start corresponding automatic
accompaniment chord function,at this time you can play with single ngering in the 19 bass button
area with chord accompaniment, press the button again to quit the function. When the rhythm is not
in service. press the button [single nger chord] to start the single nger chord function, at this time
you can play with single nger chord, press the button again to quit the function.
Multi-nger chord
When rhythm is in service. press the button [multi- nger chord] to start the auto bass chord, at this
time you can play with multi ngering in the 19 bass button area with chord accompaniment, Press
the button [multi-nger chord] again or [chord o] to end this function.
Comprehensive chord
When rhythm is in service, press the button [comprehensive chord] to start this function, at this time
you can play with single nger chord or multi-nger chord. Press the button again to quit the
function.
All of these three functions are displayed on LCD to lead you to play the keyboard.
Status register
According the playing need, after adjusted the timbre, rhythm, tempo, press the button[memory] or
[memory 1-4] the playing timbre, rhythm, tempo are renewing the corresponding state of the
system.
4. Eect control
Sustain & vibrato
Press the button [sustain] to enter the sustain function,the endnotes played are lengthened.
Press the button [vibrato] to enter the function, the pitch of the notes vibrates within a limited
range.
When sustain & vibrato is in service LCD will display the instruction.
Rising tone & falling tone
Press the button [transposition] to adjust the tone,it is able to adjust to increase 6 grades or reduce
6 grades. Press the button [+] and [-] at the meantime, the transposition turned into 0, LCD display
the pitch for 3 seconds.
Touch response keyboard
This keyboard with touch response function,is start on default when keyboard is turn on,the
volume is depend on the touch strength, press the button [touch response keyboard] again to quit
this function, LCD will display the instruction.
Split
Press the button [split] the keyboard divide into two areas, at this time LCD displays the second
timbre, press the button [+/-] to change the timbre, press
the button [split] again to quit this function.
Double timbre playing
Press the button [double timbre] to play the notes with combinational two timbres, at this time the
timbres displayed is the second one, press the button [+/-] to change the timbre, press the button
[double timbre] again to quit this function.
Tune function
Press the button [+/-] to adjust the tune, the adjustment scope is -99 to 99.
Demo song
30 demo songs for your selection, please see in attachment 3. Press the button [demo] to play the
demo song cyclically. Press the button [+/-] to choose the demo song.
Teaching function
Press the button [single-key] [follow] or [concert] to enter the corresponding teaching mode,LCD
display the corresponding state.
A.Single-key: the note button is pressed to continue the music, whether or not you play the right
note, you will get the right sound. The song still goes on.
B.Follow:the main melody is shielded it seems like karaoke,the song would not stop, if you do not
play the keyboard for three seconds, the main melody will
renew.
C. Concert:only the note pressed correctly, the song would goes on, the song would played
cyclical, press the [single-key] [follow] or [concert] to quit the function.
Recording
Press the button [record] to go into the function, the notes recorded about 110 notes, the notes
playing will be recorded. Neither ngering nor percussion would be recorded. New notes can be
added till the room is full.When recording is under way. press [playback] to play the recorded notes
one by one, LCD display the corresponding state ,when the room is full the LCD will display“full"
for 4 second , press the [record] button again to quit the function.
Rhythm programming
Press the button [program] to go into the programming mode and the corresponding mode
display on LCD.In the programming mode to edit drums into the keyboard, only one drum can be
edit at a time and drums edited should not exceed the maximum number 32. press a key once to
edit an empty beat more than 32 notes LCD will display “full" for 3 second.In programming mode.
press [program] to end this function and get into normal function, at this time corresponding
mode display on LCD.
In programming mode,press [playback] to play the drums edited cyclically, forming a rhythm of
self- edited style,corresponding state displayed on LCD. In this mode you can choose dierent
timbre to play.
5. With USB music player
Volume [+] and [-]:the volume button is pressed to increase the volume or reduce the volume.
Prev.music/ next .music: the prev button or next button is pressed to select prev music or next
music, the pressing on the two buttons are fast-back or fast-forward.
EQ mode:EQ button is pressed every time, the normal mode, jazz mode, classical mode,popular
mode and rock and roll mode is changed in turn.
Playing mode: the button is pressed for the rst time, and the music in the le is played; the button
is pressed for the second time, and the mode is change into the single-cycle mode.The button is
pressed for the third time, and the mode is change into the random playing mode.
Playing:the U disk is learned before the power is on. The playing button is pressed to play the
music. It only support MP3 sound format.
8
Table of contents
Languages:
