Kiddery Toys BK2104 User manual

KITCHEN PLAY SET
Assembly Instructions
Model #BK2104
Please read this manual carefully and assemble the product
according to the instructions given in this manual.

Kitchen Play Set Assembly Instructions
Product Parts/Boards
Other Parts and Accessories
01
2
3
4
78
11
12
13
14
15
16
18 19
22
24
26
27
29
31
27
1
5
6
9
x2
20 21 23 30
25
17
10
x1 x1 x1 x1
x1 x1 x1 x2 x1
x4
x1 x2
x1 x1 x2 x1 x2 x4
Ax30 Cx18
Fx4 Ex12
Gx4 Hx9
Kx1
Ix16
Jx2
Bx5
Dx5
Lx10 Mx2
Nx1
Ox1
Px1
Qx1 Sx1
Tx2
Rx1

02
Kitchen Play Set Assembly Instructions
• Screwdriver (Not included in the kit)
• Screw wrench (Included in the kit)
Tools Required
• Do the unboxing carefully.
• Separate all the product parts before starting assembly.
• Identify all the parts and the numbers (according to the manual) for the correct
assembly.
•Assembly should be done by an adult.
Note: If you have any questions, please contact costumer service, contact info on the last page.
Preparation
Step 1: Install Door handles:
Install the respective handles with the boards/doors 5, 6, 20, 21, and 25. Use screws (L)
and mount them from the back of the doors using the screwdriver.
Assembly instructions
L
Lx10
20
21
5
6
25
NOTE: Door 20 & 21 handles
have the same size and
design, these should be
installed opposite of each
other, so the hands can t in
hole to open the door.

03
Kitchen Play Set Assembly Instructions
Step 2: Install Chalkboard:
Attach the chalkboard to the freezer door
(5) using screws (F).
Fx4
F
5
Step 3: Install strikers with the doors:
Attach the strikers (D) to the boards/ doors
5, 6, 20, 21, and 25 by using the screws (I).
Dx5 Ix10
I
D
20
21
6
25
5
Step 4: Install door catchers to the
fridge, oven & dishwasher, shelf:
Install door catchers (B)to the boards, i.e.,
fridge (4), microwave divider(26) by using
the screws (I) and to oven & dishwasher
divider (7) by using the bolt & nuts (J).
4
26
J
B
Bx5 Jx2Ix6
I
7
Step 5: Outer Body Formation:
Note: To assemble the outer body, first lay
the base (3&1) on the ground as shown.
Attach the fridge outer board (3) to the
base layer (1&2) by using screws (A). Now
attach the base covering board (2) to the
base layer (1) by using wooden dowel (H).

04
Kitchen Play Set Assembly Instructions
Step 6: Install outer board:
Attach the dishwasher compartment
outer board (8) to the base layer by using
the screws (A).
Step 7: Install Separators:
Now attach boards (4) and (7) to the base
layer by using the screws (A).
Note: Stand the set upright for the
next step
Step 8: Covering the Back:
Install the boards 15, 16, and 17 to the
back of the case.
Step 9: Making Sections in the Fridge:
Install the board (11) in the fridge by using
screws (C) to make a shelf in the fridge.
15
16
17 C
Cx4
11

05
Kitchen Play Set Assembly Instructions
Step 10: Make Sections in The
Dishwasher:
Install the shelf (12) at the 1/2 section of
the dishwasher compartment by using
hooks (G).
Step 11: Install Towel Rack:
Install the towel rack by placing the
holding stick (19) between the hooks
(18) and attach the pieces on both
sides using (A)
Step 12: Install the Upper Layer of
The Fridge:
Install the board (10) at the top of the
fridge to make the upper compartment of
the fridge using screws (A).
Step 13: Install the Doors:
Install the oven door (20) and dishwasher
door (21).
Gx4
12
G
Ax4
A
19
18
18
Ax4
A
6
10
20
21

06
Kitchen Play Set Assembly Instructions
Step 14: Preparation of the stove
panel:
To prepare the stove panel, mount the
stove knobs into the board (23).
Step 15: Install the stove panel:
Attach the stove panel above the oven and
dishwasher and install it using the wooden
dowels(H),
Insert one wooden dowel (H) on part (7)
Step 16: Preparation of the stove and sink:
Attach the 4 burners to the board (22) using screws(E),
the faucet using screws (M),
the two rectangular sticks (27) using screws (C),
supporting column (9) above the board (22) horizontally
using (C),
23
x2
23
Ax2 Hx2
A
H
23
E
Cx5 Ex8 Mx2
C
MM
22
27
27
9

07
Kitchen Play Set Assembly Instructions
Step 17: Install the Prepared Stove &
Sink Board:
place the prepared stove & sink board (22)
over the oven and dishwasher and attach
from the fridge section by using screws (A)
and to the (27's) using screws (C)
Step 18: Prepare and Install Hanging
Rack:
To make the hanging rack, install the
hooks to the board (24) by using screws
(E), then attach it to the column and board
of the fridge by using wooden dowels(H).
Step 19: Preparations of Upper Shelf:
Install the upper shelf board (30) by placing
it over the hanging rack and attach it by
using screws (A & K).
Step 20: Attachment of (26):
Install the board (26) by placing it at the
middle of the upper shelf board (30) by
using screws (C).
Hx1Cx4Ax2
22
A
C
H
24
E
H
Hx4Ex4
Kx1Ax2
K
30
A
Cx2
C
26

08
Kitchen Play Set Assembly Instructions
Step 21: Install shelf back cover and
microwave door:
Install the shelf back cover (31) and
microwave door (25) of the shelf.
Step 22: Install Shelf Roof:
Install the board (29) over the shelf to
complete this section.
Step 23: Install Freezer Door And
Back Cover:
Install the freezer door (5) and back cover
(14).
Step 24: Install Freezer top roof:
Install the freezer roof board (13) by using
the screws (A) to complete the refrigerator.
25
31
Cx3Ax2
C
A
29
14
5
Ax4
A
13

09
Kitchen Play Set Assembly Instructions
Step 25: Install Mobile Holder:
Install the mobile holder to the fridge by
using screws.
Note: This next 2 steps 26&27 is only
an option to secure to wall.
Step 26: Install Back Handle Part 1:
Install the part (N) at the back side of the
board (14) and fasten them using bolt nut
(O), flat washer (T), flat washer (S), nut (O),
and tighten them with a wrench (R).
Step 27: Install back handle Part 2:
Install the other side of the part (N) by
using nut (P), flat washer (T), bolt (Q), and
tighten them using the wrench (R).
Step 28: Accessories:
Hang and place the accessories (provided
in the kit) to give your kitchen a final look!!!
Start enjoy playing with your kitchen!!
14
O
N
O
S
R
T
N
14
T
Q
P

10
Kitchen Play Set Assembly Instructions
• Assembly should be done by an adult.
• Don’t climb shelves to reach the top.
•Place the unit over flat ground.
•Tightly fix all the screws to prevent any accident.
•Mount the handles and hooks tightly to prevent them from falling off.
• Avoid overloading shelves.
Safety Instructions:
1-Year Limited Lifetime Warranty:
The original purchaser for this unit is provided with a 1-YEAR WARRANTY.
Covered Under Warranty:
The warranty begins from the date of purchase. For the first year, coverage is for both
parts and labor on warranty repair services.
Service option, availability, and response times may vary and may change at any time. In
accordance with applicable law. the company may require that you furnish additional
documents and/or comply with registration requirements before receiving warranty
service.
Note: Customers have to provide proof of purchase to initiate the repair work under
warranty. We strongly recommend keeping the original receipt.
Not Covered Under Warranty:
1. We do not offer a warranty for products that have been bought secondhand or as a
resold product.
2. Issues of replacement and refunds on units purchased less than 30 days from an
authorized dealer must be addressed to the dealer directly.
3. If the products purchased from an authorized dealer are after 30 days from the date of
purchase, please send the units to us for service and repair.
4. We do not cover the cost of repairs and replacements due to misuse by the owner’s
improper maintenance, and/or lost units.
5. Any water damage to the product will not be covered.
Warranty:

11
Kitchen Play Set Assembly Instructions
6. The warranty is voided if the hardware has been altered or an authorized person has
damaged the hardware while attempting repair work.
7. We reserve the right to retain and discard any part or accessories that have been found
damaged upon replacement and repair.
8. Damage caused by accident, abuse, misuse, flood fire, earthquake or other external
causes.
Kiddery Toys Inc.
Text or Call: 1-914-623-8794
Email: [email protected]
Website: www.kidderytoys.com