KIDDO KidKeeper User manual

Instruction
Manual
illustrated

Step 1: Preparing the units
Open the cover of the receiver with a screwdriver and insert the two supplied batteries.
Before closing the cover you can also insert the supplied wrist straps.

Step 2: Selecting the distance range
The receiver can be switched in two sensitivities,
short range and long range:
- 2 a 4 m 6-13 feets)
- 4 a 8 m 13-26 feets)

Step 3: How to activate the system
After switching on the receiver unit by selecting short or long range with
the slide switch, then place the transmitter unit on top of the receiver
in a way that it fits in the depression on the receiver.
The system is activated once you have heard 3
beeping sounds and the LED on the receiver
will now start blinking green.

Step 4: How to fix the units
The transmitter should be fixed on the child and the receiver to be carried by
the parent, as suggested on the pictures.

Step 5: onitoring
When the child gets out of the selected range, the receiver unit will start
beeping. When the child comes back into the safe range, the alarm will stop.
With one receiver you can monitor up to 4 transmitters
2-8m

Step 6: How to switch off the system
Put the transmitter again on the depression of the receiver, you will
hear a beeping sound and the transmitter will be switched off.
You can now switch off the receiver, moving the slide switch
to "off" position.

www.kiddo-kidkeeper.com
[e-mail]
Smart Target, Lda.
Rua Santo André de Cima 446
4495- 4 Aguçadoura
Portugal
Web: www.smart-target.pt
E-mail: [email protected]