Kimax U35WF User manual

U35WF Product User Manual
2. Product Features:
※USB3.0 high speed HDD enclosure
※WIFI storage device, private cloud
※Wireless router
※NAS function
※Through USB port to read the data from U-disk, mobile
hard disk drive and some other external storage device
※Can support multi devices simultaneously
※Can support samba and FTP share server perfectly
※Supports FAT32/NTFS/EXT4 3types disk format to read
and write data through wireless
( WiFi storage only can support this four formats, please must
check and confirm the hard disk format is correct)
1. Product Description
This product is WiFi mobile HDD enclosure also is
wireless router. It 's a mobile device which can exchange
data high-speed via USB port or WiFi network and
computer, at the same time, this device has added WiFi
transimission function and it has their own APP software
for LAN and WAN ( remote) management, at the same
time it can support the third party APP to bring more
easy usage experience to customers. It can support
3. Structure
Description
USB2.0 expansion port:
USB2.0 peripheral data
transmission port
RJ45 WAN port:
Insert the RJ45 network
USB3.0 interface:
USB3.0 peripheral data
transmission port
Master Switch:
Open / close the
Reset switch:
Wifi long after the start of
this switch to release more
than 5 seconds to restore
the factory settings
DC power port:
Insert the 12V / 2ADC
power supply
Built-in WIFI
indicator:
Blinks when a
device is
connected
Built-in power
indicator: Box
On The lamp
lights up
Step 2: Wired storage
Access to power, and then use the USB cable to connect the
computer, you can store the files within the disk management.
（New hard drive for the first time needs to be used for hard disk
initialization, or not out disk, only Disk Manager can be seen. Specific
steps can Baidu look at the "disk initialization." Disk initialization is
recommended to format into EXFAT format, or FAT32 / NTFS / EXT4 three
formats are also the other format will result in wireless storage, or can
only read can not write. Unplug the USB cable after initialization is
complete)
Note: Wired USB storage and wireless storage can not be used at the
Step 1: Install hard disk drive
First, unscrew the two captive
screws on the box and remove
1
Then, insert the housing and
tighten the two captive screws.
3
And then insert the hard disk
into the corresponding interface,
2
And finally put himself on the
box can be used normally.
4
4. Operate Steps
Step 3: Turn on the WiFi
1.Access the power, press switch to turn on；
2.Wait about 2 minutes to open WIFI, and then use your computer or phone connection to KIMAX - *****
named network;
3.Use your computer or mobile phone to open the browser, enter 192.168.169.1 Enter, enter the
password in the interface kimax login. 2
1

Step 4: Wireless Storage and Management
LAN Network
Make sure the PC / phone / tablet is connected to the WIFI after the box.
Computer version: open the "My Computer", enter the address bar to enter
the \\ 192.168.169.1 to save the file within the disk management.
Mobile phone / tablet with special APP software "KI routing" to a
variety of operations, detailed steps please see the manual "mobile
NAS
Make sure that both the computer and the box are connected to the network of
the parent router and make sure that the phone is connected to the network of the
box.
1.Open the APP "KI routing" (download mobile phone APP please see this manual
"mobile APP function").
2.Into the interface can be seen after the IP box, the IP router assigned to the higher
IP box.
3. open the computer "My Computer" in the address bar, enter the mobile client to
see the IP, enter the file can be stored on the disk management
Input \\+ IP which is separated
by superior router.
5. Mobile APP
1. Download APP
In order to prevent users from being affected by the cumbersome application modules during use, the KIDISK function is more
simplified; the operation is simpler and the operation is omitted.
Trivial operation, easy to understand. The installation package is only 19.7MB, and the memory footprint is smaller.
Friendly reminder: Please use QQ to scan and download the corresponding APP.
KIMAX DISK is an APP that directly develops KIMAX intelligent hard disk box based on KIMAX intelligent routing.
Connect to the WIFI signal sent by your home router for LAN management, shared file viewing and management. Bring more
convenient use to customers
Experience. All major app stores can be downloaded and installed. Support for Android (Android) and iOS (Apple) systems. In
the app store in the search bar
Enter KI DISK (both upper and lower case), click on the software icon in the figure below to download and install it; you can
also scan the QR code below to download it.
7. FAQ
USB cable PC can’t read disk
New hard disk need to initialize the disk for first use, otherwise can’t read it, while only can view in the disk manager . Detailed
steps can search on internet “ disk initialize”.
Wireless can’t identify the disk.
If can’t read the hard disk via WiFi network please use USB cable connect your computer and to check disk attribute and whether
have initialized or not, disk attribute if is NTFS or FAT32. If disk format is no problem as usual there are to much disk fragmentation
( For example: it’s old hard disk took from previous PC, Several partition disk partition as long as there is a difference in quality will
affect the entire disk mount failed), will need to repartition the hard disk or to reformat.
Also wired and wireless USB memory storage can not be used simultaneously (USB cable links all disk data will give priority to
wireless USB data cable will not get data to disk)
Wireless relay (if the wireless relay unsuccessful certainly following situations which condition is not met, please check carefully)
First, the need to ensure a higher level of intelligent routing no speed limit, other restrictions client IP binding, MAC binding, etc.
Internet gets set permissions. Also superior routing WIFI password needs eight more. Superior routing SSID can not contain spaces,
SSID can not have Chinese characters and contains special symbols. If the above is no problem, please check the superior routing
WIFI password is correct. If no problem, configure the relay is complete, restart the KI power equipment, see if you can boot
automatically connect successfully.
TP-LINK router individual needs to the higher bandwidth routing wireless settings and channel set to a fixed, default router will
cause the automatic individual wireless relay failure.
360 free WIFI, business class advertising WIFI, mobile phones and other hot spots supported by unknown.
Wireless and wired Internet connection can not relay mode simultaneously. After the success of the wireless relay If using wired
devices connect to the Internet to KI, KI need first route of the device management page - radio relay settings page - Click relay
6. DISK software features:
DISK software features:
After the LAN APP is downloaded, connect to the router of our KIMAX storage device network cable to open the
APP and click on the login.
You can access the disk, manage the files on the disk, open the ki disk, and enter the login interface. This interface is
divided into the guest login interface and administrator.
Login interface, the administrator login default username is admin, the password is kimax; this password can be
modified; the guest login username is guest, password
Is the guest; this password cannot be modified, as shown in the figure:
3
5
4