Kitronik MI:pro 56102 User manual

V1.0
WE’VE GOT YOU COVERED WITH THE
Protective case for the
New BBC micro:bit

BUILD INSTRUCTIONS
2
1Push Large Screws
through the front panel
and lay flat with text
facing down.
Stack each layer as shown onto the screws,
then tighten the nuts. The micro:bit will sit,
display towards the front panel, between the
dividers in the middle.
Please place your
micro:bit in here

3Attach battery pack onto the back panel,
using the provided sticky pad. The wires will
thread neatly through the curved channels,
and the sticky pad fits between them.
*battery pack not included

For more information on RoHS and CE please visit kitronik.co.uk/rohs-ce. Children
assembling this product should be supervised by a competent adult. The product
contains small parts so should be kept out of reach of children under 3 years old.
TOOLS REQUIRED: STOCK CODE
56102
• Flat Head Screwdriver
CONTENTS
Designed & manufactured
in the UK by
T: [phone]
W: www.kitronik.co.uk
E: [email protected]
kitronik.co.uk/twitter
kitronik.co.uk/facebook
kitronik.co.uk/youtube
kitronik.co.uk/instagram
For more information on RoHs and CE please visit kitronik.co.uk/rohs-ce. Children
assembling this product should be supervised by a competent adult. The product
contains small parts so should be kept out of reach of children under 3 years old.
WARNING: Contents may inspire creativity
x4
x4
x1