Klipsch Reference Premiere RP-160M User manual

C
C
CO
O
ON
N
NS
S
SU
U
UM
M
ME
E
ER
R
R
KLIPSCH AUDIO TECHNOLOGIES
Reference Premiere RP-160M/RP-150M Monitor Speaker Service
Manual
Table of Contents
SPECIFICATIONS.........................................................................................................................2
CUT SHEET DATA FOR RP-160M....................................................................................................2
CUT SHEET DATA FOR RP-150M....................................................................................................2
EXPLODED VIEW AND WARRANTY PARTS LISTS............................................................4
TROUBLESHOOTING GUIDELINES .......................................................................................5
TWEETER REMOVAL.......................................................................................................................5
WOOFER REMOVAL......................................................................................................................14
Product Type: RP-160M/RP-150M
Manual Part #: 1061797
Model Line: Reference Premiere
Product Launch Year: 2015
The information contained in this document is solely intended for service and repair of Klipsch Group, Inc product;
use of this information to mimic or copy KGI designs is strictly prohibited and subject to prosecution.

Service Manual –Consumer
2
Specifications
Cut Sheet Data
Model: RP-160M

Service Manual –Consumer
3
Specifications
Cut Sheet Data
Model: RP-150M

Service Manual –Consumer
4
Part Number
1060814
1060803
1060722
1060794
Reference Premiere Tweeter
RP-150M Woofer
RP-150M Network Assy
RP-150M Grill
Parts Description
RP-150M Warranty Replacement Parts
Part Number
1060814
1061138
1061105
1061088
RP-160M Warranty Replacement Parts
Parts Description
Reference Premiere Tweeter
RP-160M Woofer
RP-160M Grill
RP-160M Network Assy
Exploded View and Warranty Parts List

Service Manual –Consumer
5
Tweeter Removal for RP-150M and RP-160M
Tools needed:
3mm hex (Allen) key
Small Flat Blade Screwdriver
First, gently pry back the silicone tweeter horn lens with your finger-tips as illustrated on the next
page.

Service Manual –Consumer
6

Service Manual –Consumer
7
Next, begin removing the screws from the perimeter of the tweeter, highlighted in red below.
There will be eight (8) total screws to remove, each using a 3mm Hex Key head.

Service Manual –Consumer
8

Service Manual –Consumer
9
Once all the screws have been removed, the tweeter and tweeter horn should come free as shown
below.
Once the tweeter is removed from the cabinet, slide back the silicone covers on the terminals, and
use a small flat blade screw driver to release the wire clips holding to the positive and negative
terminals of the tweeter.

Service Manual –Consumer
10