KLIQ UBERTUNER-MAX Series User manual

The tuner uses a rechargeable lithium-ion
batttery (included). To charge the battery, use
the included micro-USB cable to connect with
your smartphone adapter, your computer or
portable power bank to recharge.
The tuning indicator lights will all flash while
tuner is being charged. Once the tuner is
complete an "F" will appear inside the tuner
ring to indicate the battery is full. If the
battery is low an "L" will appear.
CHARGING THE BATTERY
DISPLAY & BUTTON FUNCTIONS
A - A4 Calibration Indicator
B - Tuning Mode Indicator
C - Transposition Setting Indicator
D - Note Name Indicator
MODE Button
POWER/KEY Button
A4 Button/Octave mode
OPERATING INSTRUCTIONS
1. Press and hold the POWER/KEY button
for 1second. The power will turn on/off
each time you press and hold this button.
2. Play a single note on your instrument.
The Note Name Indicator Dwill display
the name of the note that’s closest to the
pitch detected. The yellow indicators to
the left of the note will light up if the
pitch is too low or flat. The red indicators
to the right of the note will light up if the
pitch is too high or sharp. Adjust the
tuning so that the green circle around the
note lights up (along with the yellow
indicators to the left), which means the
note you’re playing is perfectly in tune.
A4 REFERENCE PITCH CALIBRATION
To set the A4 calibration, press and hold
the MODE button for 2 seconds. Display
indicators A, B, and Cwill begin to flash.
Each time you press the A4 button , the
calibration value (reference pitch) will
increase in 1 Hz steps, with the current
value shown by the A4 Calibration
Indicator A. This setting range is between
430 and 450 Hz.
Dear Musician,
Thank you for purchasing the Rechargeable
Ubertuner-MAX, and welcome to the KLIQ!
To register your product warranty, please visit
www.kliqmusicgear.com/warranty. To get the
most out of your new tuner, please carefully read
this manual prior to first use, and keep it for later
reference. Should you ever need anything, please
reach out to us at [email protected] or
call us at 800.316.9651. We are always glad to
help!
TRANSPOSITION SETTINGS
This function is for tuning a transposing
instrument. To select the appropriate
transposition setting for your instrument,
press and hold the MODE button for 2
seconds. Display indicators A, B, and C
will begin to flash. Each time you press
the KEY button the setting will cycle
between C, B♭, E♭, and F under
Chromatic Mode C , and between C and D
under Ukulele Mode U, with the current
value shown by the Transposition Setting
Indicator C.
PAGE 1
TUNING MODES
To change the tuning mode, press and
hold the MODE Button for 2 seconds.
Display indicators A, B, and Cwill begin
to flash. Each time you press the MODE
button , the tuning mode will change,
with the current mode shown by the
Tuning Mode Indicator B. The various
tuning modes are Chromatic Mode C ,
Guitar Mode G , Bass Mode B , Violin
Mode Vand Ukulele Mode U .
OCATAVE MODE
To change to the octave mode, (make
sure the tuner is in the Chromatic Mode
C), then press and hold the A4 button
until the Octave/String Indicator number
to the left of the note indicator begins to
blink. Press the button again to change
from 0-Standard mode to 1-Octave mode.
UBERTUNER-MAX EDITION

1. Using the tuner in the following
locations can result in a malfunction:
• In direct sunlight
• Locations of extreme temperature
or humidity
• Excessively dusty or dirty locations
• Locations of excessive vibration
• Close to magnetic fields
2. When not using the tuner for an
extended period of time, please remove
the battery to prevent it from leaking.
3. To avoid breakage, do not apply
excessive force to the buttons, battery
drawer or display.
4. If the exterior becomes dirty, wipe it
with a clean, dry cloth. Do not use any
chemical liquid cleaners or water.
5. To avoid damage to your
instrument's finish, we recommend
removing the tuner from your
instrument when not in use.
PRECAUTIONS
RISK OF FIRE, EXPLOSION OR BURNS
Dispose of used batteries immediately.
Do not disassemble, overcharge, crush
or expose to fire or high temperatures.
The display backlight will illuminate
brightly when sound is detected or when
a button is pressed. The tuner display
will dim after approximately 3 seconds of
no sound detected by the tuner. This
conserves battery power. If the tuner is
left on for 3 minutes without any detected
sound or user input, the tuner will turn
off automatically.
Tuner settings are remembered even
when the power is off. However, settings
will be initialized when you replace the
battery. Default settings are A440 Hz
calibration, Chromatic Tuning Mode C ,
with no transposition setting (Key C).
POWER SAVE FEATURE
In the event the tuner malfunctions,
please remove the battery tray and push
it back in after a few seconds to reset the
tuner. If the tuner still malfunctions, or if
the screen becomes blurry, then it is
time to replace the battery with a fresh
one.
TROUBLESHOOTING
Tuning Range:
A0 (27.50Hz) – C8 (4,186.01Hz)
Tuning Precision:
±1 cent
Reference Pitch Calibration:
430-450Hz (1Hz steps)
Tuning Modes:
Chromatic, Guitar, Bass, Violin, Ukulele
Transposition Range:
C, B♭, E♭, F, D
Pitch Detection Method:
Piezo Sensor
Display:
Full Color LED-backlit LCD Display
Energy Save Feature:
Automatic Power Save/Off
Power Source:
CR2032 Lithium Battery (3V, included)
Tuner Body Size:
41x41x13 mm / 1.6x1.6x0.5 inch
Weight:
41g / 1.4oz (including battery)
SPECIFICATIONS
1. Chromatic Tuning Mode
2. Guitar Tuning Mode
3. Bass Tuning Mode
4. Violin Tuning Mode
5. Ukulele Tuning Mode
5.1. C Tuning
5.2. D Tuning
NOTE NAME INDICATOR VALUES
ATTACHING THE TUNER TO
YOUR INSTRUMENT
When attaching the tuner to your
instrument, please be careful as to not
damage the instrument’s finish. Do not
attach the tuner to your instrument if the
rubber pads on the tuner clip are visibly
worn or are missing. For guitars, attach
the tuner to the headstock with the
display either in front of, or behind the
headstock. For other instruments, find a
safe and visible location to attach the
tuner to. Adjust the display by turning
and tilting the ‘L’ shaped arm that
connects the tuner to the clip. The display
itself also rotates 360 degrees, which
means you have many adjustment
options for optimal visibility of the tuner
display.
For assistance with this product,
please contact us by emailing
[e-mail]
or by visiting
www.kliqmusicgear.com/contact.
www.kliqmusicgear.com
PAGE 2
© 2022 KLIQ MUSIC GEAR