Kolin KLE-32DTE32 User manual

KLE-32DTE32/KLE-43DTE32
Quick Start Guide
T E L E V I S I O N
www.kolinphil.com.ph

-2-
1. Open the package. 2. Take out the TV. 3. Install the TV stands. 4. Connect the power cord.
PowerPower
Note: The pictures are only for reference.
Accessories
Quick Start Guide
Warranty Card
Batteries/2 Remote Control Quick Start Guide Base Stands/2
Screws/2 or 4 Warranty Card Power Cord
DisassemblyandInstallation
Note: The pictures are only for reference.
Preparation

-1-
Read all of the instructions before operating the set.
Keep these instructions well for later use.
Important Safety Instructions
● Read these instructions – All the safety and
operating instructions should be read before this
product is operated.
● Keep these instructions – The safety and operating
instructions should be retained for future reference.
● Heed all warnings – All warnings on the appliance
and in the operating instructions should be adhered
to.
● Follow all instructions – All operating and use
instructions should be followed.
● Do not use this apparatus near water – The appliance
should not be used near water or moisture – for
example, in a wet basement or near a swimming
pool, and the like.
● Clean only with dry cloth.
● Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
● Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
● Do not defeat the safety purpose of the polarized or
grounding plug. A polarized plug has two blades
with one wider than the other. A grounding plug has
two blades and a third grounding prong. The wide
blade or the third prong is provided for your safety.
If the provided plug does not fit into your outlet,
consult an electrician for replacement of the
obsolete outlet.
● Protect the power cord from being walked on or
pinched particularly at the plugs, convenience
receptacles, and at the point where they exit from
the apparatus. Only use attachments/accessories
specified by the manufacturer.
● Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the apparatus. When a
cart or rack is used, use caution when moving the
cart/apparatus combination to avoid injury from
tip-over.
● Unplug the apparatus during lightning storms or
when unused for long periods of time.
● Refer all servicing to qualified personnel. Servicing
is required when the apparatus has been damaged
in any way, such as power supply cord or plug is
damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate
normally, or has been dropped.
● CAUTION: These servicing instructions are for use
by qualified service personnel only. To reduce the
risk of electric shock, do not perform any servicing
other than that contained in the operating
instructions unless you are qualified to do so.
● Do not install this equipment in a confined or
building-in space such as a book case or similar unit,
and remain a well ventilation conditions at open site.
The ventilation should not be impeded by covering
the ventilation openings with items such as
newspaper, table-cloths, curtains etc.
● CAUTION – To prevent electric shock hazard,
replace grille.
● Please refer the information on rear enclosure for
electrical and safety information before installing or
operating the apparatus.
● To reduce the risk of fire or electric shock, do not
expose this apparatus to rain or moisture.
● The apparatus shall not be exposed to dripping or
splashing and that no objects filled with liquids,
such as vases, shall be placed on the apparatus.
● For the terminals marked with symbol of “ ” may
be of sufficient magnitude to constitute a risk of
electric shock. The external wiring connected to the
terminals requires installation by an instructed
person or the used of ready-made leads or cords.
● To prevent injury, this apparatus must be securely
attached to the floor/wall in accordance with the
installation instructions.
● Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
● The battery (battery or batteries or battery pack)
shall not be exposed to excessive heat such as
sunshine, fire or the like.
● Excessive sound pressure from earphones and
headphones can cause hearing loss. Listening to
music at high volume levels and for extended
durations can damage one’s hearing. In order to
reduce the risk of damage to hearing, one should
lower the volume to a safe, comfortable level, and
reduce the amount of time listening at high levels.
(Only for German).
● The mains plug/appliance coupler/direct plug-in
adapter is used as disconnect device, the disconnect
device shall remain readily operable.
● When not in use and during movement, please take
care of the power cordset, e.g. tie up the power
cordset with cable tie or something like that. It shall
be free from sharp edges and the like that can cause
abrasion of the power cordset. When put into use
again, please make sure the power cordset being
not damaged, If any damages found, please look for
the service person to replace the power cordset
Warning and Precaution
-3-

specified by the manufacturer or have the same
characteristics as the original one.
● Attention should be drawn to environmental aspects
of battery disposal.
● Protective earthing terminal. The apparatus
should be connected to a mains socket outlet
with a protective earthing connection.
(Only for Class I appliance)
● No naked flame sources, such as lighted candles,
should be placed on the apparatus. To prevent the
spread of fire, keep candles or other open flames
away from the apparatus at all times.
● If the apparatus have the symbol in its rating
label and the power cord has two pins, it means
that the equipment is a Class II or double insulated
electrical appliance. It has been designed in such a
way that it does not require a safety connection to
electrical earth.(Only for Class II appliance)
● If the apparatus don’t have the symbol in its
rating label and its power cord has three pins, it
means protective earthing connection is needed.
The apparatus should be connected to a mains
socket outlet with a protective earthing
connection.(Only for Class I appliance)
● The following information are recommended to be
included as far as applicable where applicable:
Refers to alternating current(AC).
Refers to direct current(DC).
Refers to ClassII equipment.
Refers to dangerous voltage.
Refers to stand-by.
Refers to power ON.
~
● Warning for Apparatus containing COIN / BUTTON
CELL BATTERIES (Below instruction only used for the
apparatus containing a user-replaceable coin/button
cell battery)
WARNING:
Do not ingest the battery, Chemical Burn Hazard
(The remote control supplied with) this product
contains a coin/button cell battery. If the coin/button
cell battery is swallowed, it can cause severe Internal
burns in just 2 hours and can lead to death. Keep new
and used batteries away from children.
If the battery compartment does not close securely,
stop using the product and keep it away from children.
If you think batteries might have been swallowed or
placed inside any part of the body, seek immediate
medical attention.
CA UT IO N
RISK O F ELECT RIC SHO CK
DO NOT O PEN
ATTENTION:RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR.
● WEEE Directive
Correct Disposal of this product. This marking
indicates that this product should not be
disposed with other household wastes throughout
the EU. To prevent possible harm to the environment or
human health from uncontrolled waste disposal,
recycle it responsibly to promote the sustainable
reuse of material resources. To return your used
device, please use the returnand collection systems
or contact the retailer where the product was
purchased. They can take this product for
environmental safe recycling.
● This lightning flash with
arrowhead symbol within an
equilateral triangle is intended
to alert the user to the presence of non-insulated
“dangerous voltage” within the product’s enclosure
that may be of sufficient magnitude to constitute a
risk of electric shock.
● To reduce the risk of electric shock. Do not remove
cover (or back). No user serviceable parts inside.
Refer to qualified service personnel.
● The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance instructions
in the literature accompanying the appliance.
Warning and Precaution
-4-
● Adapter Information
Manufacturer:
Model:
Input:
Output:

Warning and Precaution
Positioning the TV
● Install Display on solid horizontal surface such as a
table or desk. For ventilation, leave a space of at least
10cm free all around the set. To prevent any fault
and unsafe situations, please do not place any
objects on top of the set. This apparatus can be used
in tropical and/or moderate climates. Fix the rear of
enclosure to wall (only for some countries).
● Warning: Never place a television set in an unstable
location. A television set may fall, causing serious
personal injury or death. Many injuries, particularly
to children, can be avoided by taking simple
precautions such as:
- Using cabinets or stands recommended by the
manufacture of the television.
- Only using furniture that can safely support the
television.
- Ensuring the television is not overhanging the edge
of the supporting furniture.
- Not placing the television on tall furniture (for
example, cupboards or bookcases) without
anchoring both the furniture and the television set
to a suitable support.
- Not placing the television set on cloth or other
materials that may be located between the
television set and supporting furniture.
- Educating children about the dangers of climbing
on furniture to reach the television or its controls.

If your existing television set is being retained and
relocated, the same considerations as above should
be applied. (Only for the TV with mass exceed 7 kg)
Wall-hanging bracket
● An optional wall mount can be used with your
television. Consult with your local dealer for a wall
mount that supports the VESA standard used by your
TV model. Carefully attach the wall mount bracket at
the rear of the TV. Install the wall mount bracket on a
solid wall perpendicular to the floor. If you are
attaching the TV to other building materials, please
contact qualified personnel to install the wall mount.
Detailed instructions will be included with the wall
mount. Please use a wall mount bracket where the
devices is adequately secured to the wall with
enough space to allow connectivity to external
devices.
● Disconnect the power before moving or installing
the TV. Otherwise electric shock may occur.
● Remove the stand before installing the TV on a wall
mount by performing the stand attachment in
reverse.
● If you install the TV on a ceiling or slanted wall, it
may fall and result in severe injury. Use an
authorized wall mount and contact the local dealer
or qualified personnel. Otherwise it is not covered
by the warranty.
● Do not over tighten the screws as this may cause
damage to the TV and void your warranty.
● To prevent injury, this apparatus must be securely
attached to the floor/wall in accordance with the
installation instructions.
● Use the screws and wall mounts that meet the
following specifications. Any damages or injuries
buy misuse or using an improper accessory are
not covered by the warranty.
-5-
Note: The picture is only for reference.
10CM
10CM
10CM
10CM
Note: The picture is only for reference.

-6-
Model Size: 32"
Screw
Diameter(mm) "E"
Depth(mm)
"D"
Max
Min
Quantity
VESA (A*B*C)
Top Down
M4 M4
99
66
22
100*100*100
Note:
1) The pictures in this manual are for reference only.
2) For the TV sets with terminals towards the wall, in
order to leave enough space to use the terminals,
a rubber cushion is needed together with the screw
to fix the wall mount. It is a small hollow pillar
whose internal diameter is 8mm, external diameter
is 18mm and height is 30mm.
3. The information in this document is subject to
change without notice. The manufacturer accepts
no liability for damage resulting directly or indirectly
from faults, incompleteness or discrepancies between
the user manual and the product described.
4. In dry environment due to static electricity, the
product may restart and return to the main OSD
interface, USB player interface or the previous source
mode. It is normal and please continue to operate the
TV as you will.
● Use the remote control by pointing it towards the
remote sensor. The items between the remote
control and the remote sensor will interfere the
normal operation.
● Do not make remote control vibrate violently. Also,
do not splash liquid on the remote control, also do
not put the remote control in high humidity place.
● Do not place remote control under direct sunlight
which will cause deformation of the unit by heat.
● When the remote sensor is under direct sunlight or
strong lighting, the remote control will do not work.
If so please change the lighting or TV's position, or
operate the remote control closer to the remote
sensor.
Precautions For Using Remote Control
Operating Environment
● Do not install this equipment in a confined space
such as a bookcase or similar unit.
● Do not use the set near damp, and cold areas,
protect the set from overheating.
● Keep away from direct sunlight.
● Do not use the set near dust place.
● Do not attach candle to accessible opening area, to
avoid flammable foreign material from entering the
TV.
Precautions For Using Battery
Improper using of the battery will cause leakage. So
please do as the following methods and use carefully.
1. Please note the batteries polarity, to avoid short '
circuit.
2. When the battery s voltage is insufficient which '
affect the use range, you should replace new
battery. Remove the batteries from the remote
control unit if you do not intend to use it for a long
time.
3. Do not use different types of batteries (for example,
Manganese and Alkaline batteries) together.
4. Do not put the battery into fire, and charge or
decompose the battery.
5. Please dispose batteries abide by relevant
environmental protection regulation.
6. WARNING: The batteries (battery pack or batteries
installed) shall not be exposed to excessive heat
such as sunshine, fire or the like.
Warning and Precaution
E
D
A
BС
Model Size: 43"
Screw
Diameter(mm) "E"
Depth(mm)
"D"
Max
Min
Quantity
VESA (A*B*C)
Top Down
M6 M6
20 15
12 7
22
200*100*200

Remote Control Function
-7-
Note:
1). The pictures are for reference only.
2). Some buttons may not be available for some regions or some models.
1. POWER ( ): Turn the TV on or standby.
4. S.M. (Sound Mode): Change the sound mode.
3. P.M. (Picture Mode): Change the picture mode.
5. ZOOM: Change the aspect ratio.
6. Number buttons: Choose the channel directly.
12. OK: Confirm the selection.
11. UP/DOWN/LEFT/RIGHT ( / / / )
Navigate the menu.
9. MENU: Open the menu options.
7. RETURN: Return to the previously-viewed channel.
13. EXIT: Exit the current menu.
8. (QUICK): Access to the quick menu.
2. Mute ( ): Mute or restore the volume.
10. SOURCE: Select the input source.
14. LIST: Enter the channel list.
15. INFO: Display information about current source.
16. MTS: select the sound output depending on
the broadcasting channel.
1
5
2
910
78
11
12
13
14
16
15
3
4
SLEEP
SUBTITLE
6
18
19
23
22
25
27
26
20
21
24
17
21.GUIDE: Enter the EPG interface.
22.FAV. : View your assigned favorite channels.
27.Color buttons(RED/GREEN/YELLOW/BLUE)
Execute the prompt function in specific mode.
26. USB Play Control Buttons
PlAY & PAUSE ( ): Pause or continue the playback.
Fast Backward ( ): Fast backward.
Fast Forward ( ): Fast forward.
Previous ( ): Play the previous file.
Next ( ): Play the next file.
STOP ( ): Stop the playback.
25. FREEZE: Freeze the picture on the screen.
20. SUBTITLE: Enable or disable the subtitle.
23. C.C.: Select the mode of closed caption.
24. (REC.): Record the current DTV program.
17. Volume Up/Down(VOL+/VOL-):
Increase or decrease the sound volume.
18. Channel (CH+/CH-): Up/Down
Change to the previous or next channel.
19. SLEEP: Setup the sleep timer to turn off the
TV automatically.

-7-
Note:
1). The pictures are for reference only.
2). Some buttons may not be available. When you press such buttons, they will not response,
or there will be a display such as “Not Available” on the screen.
1. POWER ( ): Turn the TV on or standby.
3. Number buttons: Set the channel directly.
2. SOURCE: Select the input source mode.
10. DTVi: Turn on or turn off the DTVi function.
13. EPG: Access the EPG interface.
8. MENU: Enter or exit the main menu.
11. UP/DOWN/LEFT/RIGHT( / / / )
Navigate the menu.
12. OK: Confirm the selection.
14. Exit: Exit the current operation.
5. INFO: Display the information of current channel.
1
5
3
4
2
9
7
11
12
13 14
6
10
8
6. P. MODE: Select the desired picture mode.
7. S. MODE: Select the desired sound mode.
9. : Return to the previously-viewed program.
15
16
19
22
23
20
17
18
21
4. Decimal Point: Input the decimal point.
15. Color Buttons (RED/GREEN/YELLOW/BLUE)
Execute the prompt function in specific mode.
Next ( ): Play the next file.
23. USB Play Control Buttons
Play & Pause ( ): Pause or continue the playback.
Fast Backward ( ): Fast backward.
Fast Forward ( ): Fast forward.
Previous ( ): Play the previous file.
Stop ( ): Stop the playback.
18. Volume Up/Down (VOL+/VOL-)
Increase or decrease the sound volume.
21. REC ( ): Record the current DTV program.
16. FAV.: View your assigned favorite channels.
17. Mute ( ): Mute or restore the volume.
20. USB: Access the multimedia player.
22. QMENU: Access the quick menu.
19. Channel (CH /CH ) Up/Down
Change to the previous or next channel.
Remote Control Function

-8-
Buttons on TV
How to use E-manual
E-Manual is built into your TV and can be displayed
on the screen. To learn more about your TV features,
access your E-Manual by referring to below information.
1. Press MENU button to access the menu list. There is a display
“ E-Manual” at the bottom.
2. Press BLUE button to access the E-Manual interface.
3. Remote control buttons in the E-Manual are described by words
instead of icons, refer to below information to help you operate the TV.
E-Manual
Place two AAA size batteries in the remote controls
battery compartment, making sure to match the
polarity markings inside the compartment.
Install Remote Control Battery
Basic Operation
0~9
Number Buttons Select Page
Go to page
Blue button
press to the previous page.
press to the next page.
Enter or exit the E-Manual
interface.
OK
Turn on / Turn off the TV:
In standby mode, short press button to turn
on the TV.
When TV is turned on, long press for more
than 2 seconds, TV will be turned off.
Menu selection (With OSD):
Press to open the OSD, press or button
to select a menu and press to access it.
Function button
Up button
Down button
In TV mode without OSD, you can press or
to set channel + and channel -.
BUTTON CONTROL
Press
Press
and hold or
Move left or up
Move right or down
Enter (Press)
Back (Hold)
Main menu Source menu
MENU OPERATION
Select and confirm
setting a value.
Move Left
Move Right
Enter
/ /
/
Volume adjust
Volume Up
Volume Down
Turn on / Turn off the TV:
In standby mode, short press button to turn
on the TV.
When TV is turned on, long press for more
than 2 seconds, TV will be turned off.
When the TV is turned on, press to open the
OSD, short press to select the function item;
long press to enter the selected item and
make desired adjustments.
Volume Up
Volume Down
Next Channel
Previous Channel
Input Source
Power

Terminal Connection
AV IN
Connect audio and video signal from signal source
such as DVD.
AV IN
VIDEO
RL
AUDIO
VCR
Gameconsole
Camcorder
USB
USB port.
USB DISK
USB1
HDMI IN
Connect HDMI input signal from signal source
such as DVD.
HDMI1
Camcorder
Recorder / Player
EARPHONE
Headpone terminal is shared with Lineout terminal.
They can be selected in Sound Menu.
headphone: Speakers will be muted when earphone
plugged.
Lineout: peakers won’t be muted, and sound level is
xed.
Earphone
ANT.
Connect a coaxial cable to receive signal from
the antenna or cable.
ANTENNA
IN
LAN IN/GINGA
Ginga Port.
Terminals
-9-
Antenna or cable TV
Analogue audio device
DIGITAL AUDIO OUT
Use a SPDIF cable to output your TV audio signal
to a compatible audio receiver.
DIGITAL
AUDIO OUT
Digital audio device
SERVICE
Debug ports or update software.
SERVICE
Note:
1) The pictures are only for reference.
2) External equipments and cables shown herein are not supplied with the TV.
3) Some terminals may differ by different regions or models, and please take your actual TV set as the standard.

Troubleshooting
Poor Signal
This is usually caused by interference from cell
phones, walkie-talkie, automotive ignition
system; neon, electric drill or other electronic
equipment or radio interference sources.
Before calling a service technician, please check the following table for a possible cause of the symptom
and some solutions.
General Problem / Solution
Remote control does not work
. Check the remote sensor on the remote control.
. Change the batteries.
. Batteries are not installed correctly.
. Main power is not connected.
‘This le is invalid’ appears or audio is normal
but video is abnormal
. The media le maybe damaged, check if the le
can be played on the PC.
. Check if video and audio codec is supported.
Web page can not be displayed completely
. Flash is not supported.
‘Unsupported audio’ appears or video is normal
but audio is abnormal
. The media le maybe damaged, check if the le
can be played on the PC.
. Check if video and audio codec is supported.
Multimedia Player / Solution
Browser / Solution
(May not be available)
Network failure
. Check if the router works well.
. For models needing USB dongle to connect to
internet, check if the USB dongle is inserted well.
. Make sure the TV has connected to the router
successfully.
Network / Solution
(May not be available)
Picture & Sound / Solution
No picture, no sound
. Check the signal source.
. Plug another electrical device into the outlet to
make sure it is working or turned on.
. Power Plug is bad contact with the outlet.
. Check the signal.
No sound, picture OK
. If no sound, do not mute or increase the sound
volume.
. Open the sound menu and adjust ‘Balance’.
. Check if a headphone has been inserted in, if
so, pull out the headphone.
Abnormal picture
. For no color or bad picture quality, you may:
1. Adjust the color option in menu settings.
2. Keep the TV at a sufficient distance from other
electronic products.
3. Try another channel, maybe exit broadcasting
signal problem.
. Bad TV signal (Display mosaic or snowakes)
1. Check the signal cable and adjust the antenna.
2. Fine tune the channel.
3. Try anther channel.
-10-
Browser is forced to be shut down
. Web page includes too many large pictures, thus
leads to insufficient memory and close the browser.

Specification
100-240V~50/60 Hz
32": 60 W
43": 74 W
Working voltage
Rated power consumption
Environment
(only for Moderate climates zone)
Environment
(only for Tropical climates zone)
Audio output power (L+R)
Dimensions (W x H x D) with stand
Dimensions (W x H x D) without stand
Net weight with stand
Net weight without stand
RF aerial input
Language of OSD
System
Channel coverage
Maximum number of
storable programs
Working temperature: 5oC~35oC
Working humidity: 20%~80%
Storage temperature: -15oC~45oC
Storage humidity: 10%~90%
Working temperature: 5oC~45oC
Working humidity: 20%~80%
Storage temperature: -15oC~50oC
Storage humidity: 10%~90%
6W + 6W
32": 733.4 X 470.0 X 165.5 mm
43": 974.5 X 617.1 X 218.9 mm
32": 733.4 X 438.5 X 85.1 mm
43": 974.5 X 575.6 X 85.8 mm
32": 4.0 Kg
43": 8.8 Kg
3.9 Kg32":
43": 8.6 Kg
75 ohm unbalanced
Multiple options
DTV: ISDB-T
ATV: NTSC-M,PAL-M/N
DTV: VHF 177.143 ~ 213.143MHz
UHF 473.143 ~ 803.143MHz
ATV: 54 ~ 864MHz
DTV: 62
ATV: 203:
-11-
Note: Some specifications may differ by different regions or models, and please take your
actual TV set as the standard.

License
The terms HDMI and HDMI
High-Definition Multimedia Interface,
and the HDMI logo are trademarks or
registered trademarks of HDMI Licensing LLC in the United States and
other countries.
-12-

-13-
KPII20182806