LARS LAJ 11346 User manual

11346
1
STAND-ALONE
Side and top view with safety zone scale 1:100
Product name: Powerclimber
Catalogue number: 11346
Dimensions: 601x520 cm
Safety zone: 901x820 cm
Total height: 386 cm
Critical Falling Height: 90 cm
Requires falling surface: YES
Age level: 5+ years
Acc. To En 1176: YES
Spareparts available: YES
The number of users in the
same time: max. 10 users
601 cm
520 cm
820 cm
386 cm
901 cm
NOTICE:
Device should be regularly controlled
and any slack in the rope require adjustment.
Frequency of control should be appropriate
to the intensity of use of the device.

Product logbook
211346
PRODUCT DATA COMPANY DATA
Product name: Powerclimber Name:
Catalogue No.: 11346 Address:
Product type: STAND-ALONE Zip code/city:
Place:
Critical Falling Height: 90 cm Phone:
Dimensions: 601x520 cm Fax:
Safety Zone: 901x820 cm Email:
Age Level: 5+ years
Product Photo/Picture OWNERS DATA
Name:
Contact:
Address:
Zip code/city:
Place:
Phone:
Fax:
Email:
AREA DATA ADMINISTRATOR DATA
Placing: Name:
Address: Contact:
Zip code/city: Address:
Place: Zip code/city:
Playgroundname: Phone:
Product number: Fax:
Email:
SURFACE
Material:
Dimensions:
Underground:
Supplier:
Buying date:
Installation:
Guarantee:

Technical Maintenance
311346
DAILY INSPECTION
- external examination, examples: cleanliness, equipment ground clearances, ground
surface finishes, exposed foundations, sharp edges, missing parts, excessive wear
(of moving parts) and structural integrity
- checking condition of the surface and adjusting if needed
PERIODIC CHECKS
- checking the tension of the ropes and adjusting if needed
- checking the condition of construction elements
- checking loose clips (elements joining two ropes) and adjusting if needed
ANNUAL INSPECTION
- checking the tension of the ropes and adjusting if needed
- checking the condition of construction elements
- checking loose clips (elements joining two ropes) and adjusting if needed
- checking the thickness of the filling surface around devices, fill up if needed
REMARKS
FIRST TIGHTENING OF THE ROPES SHOULD BE MADE ONE WEEK AFTER FIRST
USE,
SECOND TIGHTENING OF THE ROPES SHOULD BE MADE ONE MONTH
AFTER FIRST ONE.
NEXT TIGHTENING OF THE ROPES SHOULD BE MADE AFTER ANNUAL
INSPECTION.

Technical Maintenance
411346

Technical Maintenance
511346

Product main dimensions
611346

Installation manual
711346
1. Choose place for the post [1] remembering about safety area.
2. Using a pattern, mark tracks of foundation bars [2], pattern protect by nuts M22 [9].
3. Using flat bars [3] mark places for the foundations [5].
Mark places for middle foundations [6], that are in the middle of length - measuring in straight line -
between the foundations [5]. Use a flat bar [4] to mark foundations [6].
Foundation bars [2] have to go into flat bars holes. This will guarantee right postions of the foundations..
4. Dig holes for foundation bars [2] and foundations [5] & [6].
Before concrete foundations protect them against movement and using flat bars make sure they are in right place
WARNING! Main post foundation [1] can’t be lower than foundations [5] & [6].
5. Place the concrete in foundations [1], [5], [6] and wait untill solidified.
6. Install post [1] (description on the next page) and regulate tension of the opposite ropes with a turnbuckle
(as tight as possible, keeping vertical position of the post) use nut [7] and then regulate by tension element
on the top of post, description on the page number 6
(use tension element as less as possible to keep possibilty to regulate in future tension of the ropes).
7. After tension the ropes cut the bolt in anchors to nut height.
[2]
[5]
[3]
[4]
[5]
[3]
[4]
[6]
[5]
[1]
[5]
[5]
[6]
[2]
INSTALLATION ON GROUND
[7]
[9]

Installation manual
811346
50 cm
60 cm SOIL
Pivot
Washer
W10
M10
W10
M10x120
Nut selflocking M22 [4]
Nut M22 [2]
Concrete
i
m n. 60 cm
min. 60cm
Concrete
13 cm
Ground
level 300
500
A
A (1:15)
Post [5]
INSTRUCTION
1. After mount threaded rod M22 [1] and when the concrete solidified install nut M22 [2].
2. Install fixing element [3] and leveled by nut M22 [2] under fixing element.
3. Fixing element [3] protect by nut selflocking M22 [4].
4. After mount fixing element [4] install post [5].
Threaded rod M22 [1]
Fixing element [3]

Installation manual
911346
Cap nut M22 [1]
Cover [2]
Bolt M22 [3]
Washer 22 [4]
Nut M22 [5]
Bolt M10x165 [6]
Nut M10 [7]
Bolt M10x70 [8]
TENSION ELEMENT
1. Install ropes tension element on the post.
2. Ropes tension by the bolts M22 [3] and M10 [6].
3. During tension ropes by bolts M10 [6] remember to do
evenly each bolt M10 [6].
4. After tension ropes screwed bolts M10 [8] and nuts M10 [7].
5. Instal nut M22 [5] with washer [4] so that the bottom of cover [2]
and steel plate [9] are on the same plane
6. Protect cover [2] by cap nut [1].
Steel plate [9]
INSTRUCTION

Installation manual
10 11346
SOIL
60 cm
50 cm
concrete
Sand
Gravel
Bark
min. 30cm
concrete
50 cm
SOIL
50 cm
60 cm

Installation manual
11 11346
SOIL
60 cm
50 cm
Safety surface
min. 30cm
concrete or
concentrated
surface
SOIL
60 cm
SOIL
60 cm
SOIL
50 cm
concreteconcrete
50 cm
SOIL
50 cm
safety surface
min. 30cm