Lavi Industries Edge Curve User manual

27810 Avenue Hopkins, Valencia, CA 91355 • www.lavi.com • 800.624.6225
Part No. 87-242 Page 1
Installation Instructions
Edge Curve
Portable Sign Stand
Tools Needed:
1/8” Allen Wrench
5/32” Allen Wrench
Parts:
A. Graphics Panel (Sold Separately)
B. Left Side Brace*
C. Right Side Brace*
D. Base
E. Top Support
F. Top Support Bolts (4) - 1/4" - 20 x 7/8"
G. Base Bolts (4) - 3/4" - 10 x 24
A B
C
D
E
F
G
1
1
STEP
Attach left side brace using 1/4” - 20 x 7/8” Hex Bolts. Leave slightly loose
to make it easier to insert graphic.
Repeat for right side brace.
Side brace groves should be facing inwards.
Attach Side Braces
Please consider using 2 people when assembling.
*Use caution when unwrapping braces to prevent damage.

Part No. 87-242 Page 2
Installation Instructions
27810 Avenue Hopkins, Valencia, CA 91355 • www.lavi.com • 800.624.6225
Edge Curve
1
4
STEP
Finish tightening side braces to base.
Finish Tightening
1
2
STEP
Insert Graphic
Slide graphic panel into grooves of side braces until panel
comes to a rest on the base.
1
3
STEP
Attach top brace using the bolts in the “Hardware
for Top” bag — 3/4” - 10 x 24 Hex Bolts.
NOTE: Top brace should be installed so that
bracket overhangs back of display to prevent
covering front of sign graphic.
Attach Top Brace
BACK OF DISPLAY.