Gladiator GARA904X User manual

HEAVY DUTY METAL
RACK SHELVING
Assembly Instructions
ÉTAGÈRE MÉTALLIQUE
POUR CHARGES
LOURDES
Instructions d’assemblage
ESTANTERÍA DE METAL
DE ALTA RESISTENCIA
Instrucciones de ensamblaje
TABLE OF CONTENTS/TABLE DES MATIÈRES/ÍNDICE
In U.S.A. call: 1-866-342-4089
Aux États-Unis, composer le : 1 866 342-4089
En los EE. UU., llame al: 1-866-342-4089
W11320048D
In Canada call: 1-800-807-6777
Au Canada, composer le : 1-800-807-6777
En Canadá, llame al: 1-800-807-6777
www.gladiatorgarageworks.com
www.gladiatorgarageworks.ca
Models
GARA904X/YGRA904X/GARB904X - 90" Heavy Duty Mega Rack
GARS774X/GARS774S/GARM774X - 77" Heavy Duty Rack
GARS604T/YGRS604T/GARS604TK - 60" Heavy Duty Rack
GARS484T/YGRS484T/GARS484TK - 48" Heavy Duty Rack
HEAVY DUTY METAL RACK SHELVING
SAFETY..................................................... 2
DIMENSIONS ........................................... 2
PARTS....................................................... 3
HEAVY DUTY METAL RACK SHELVING
INSTALLATION INSTRUCTIONS............. 5
Shelving Use Requirements................... 5
Unpack .................................................. 5
Assemble & Complete ........................... 5
WARRANTY.............................................. 8
SÉCURITÉ DE L’ÉTAGÈRE MÉTALLIQUE
POURCHARGES LOURDES................... 9
DIMENSIONS ........................................... 9
PIÈCES ................................................... 10
INSTRUCTIONS D’INSTALLATION
DE L’ÉTAGÈRE MÉTALLIQUE
POURCHARGES LOURDES................. 12
Spécications d’utilisation
de l’étagère.......................................... 12
Déballage............................................. 12
Assemblage ......................................... 12
GARANTIE.............................................. 15
SEGURIDAD DE LA ESTANTERÍA
DEMETAL DEALTARESISTENCIA...... 16
DIMENSIONES....................................... 16
PIEZAS.................................................... 17
INSTRUCCIONES DE INSTALACIÓN
DELA ESTANTERÍA DE ACERO DE
ALTARESISTENCIA............................... 19
Requisitos de uso de laestantería....... 19
Desempaque........................................ 19
Ensamble y complete .......................... 19
GARANTÍA.............................................. 22
Compatible accessories
GASL182PHB - Rack Shelf Liner 2-Pack for 18" Deep Shelves
GASL242PHB - Rack Shelf Liner 2-Pack for 24" Deep Shelves
GAGP24WRHY - Heavy Duty Rack GearTrack®Pack

2
HEAVY DUTY METAL RACK SHELVING SAFETY
DIMENSIONS
You can be killed or seriously injured if you don't immediately
You can be killed or seriously injured if you don't follow
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”
These words mean:
follow instructions.
instructions.
DANGER
WARNING
GARA904XIG
YGRA904X
GARB904XIG
GARS774XEG
GARS774SZG
GARM774XHG
GARS604TEG
YGRS604TGG
GARS604TKW
GARS484TEG
YGRS484TGG
GARS484TKW
A 90" (229 cm) 72" (183 cm) 72" (183 cm) 72" (183 cm)
B 24" (61 cm) 24" (61 cm) 18" (46 cm) 18" (46 cm)
C 90" (229 cm) 77" (196 cm) 60" (152 cm) 48" (122 cm)
D 22" (56 cm) 22" (56 cm) 16" (41 cm) 16" (41 cm)
E 84½" (215 cm) 72" (183 cm) 55" (139 cm) 43" (108 cm)
This storage rack unit must be placed on a level surface.
NOTES:
■Do not stand or climb on the unit.
■Do not overload.
■Evenly distribute the weight on each shelf, and keep the
heaviest loads on the bottom shelf.
C
B
A
E
D

3
PARTS
P2
P1
P3
P4
77" (196 cm) Wide Rack Shelving
90" (229 cm) Wide Rack Shelving
P1—Wire shelves (4)
P2—Support beams (8)-4 in front, 4 in back
P3—Tie channel supports (quantity varies by size)
P4—Welded-end frame assemblies (2)
P3
P4
P1
P2

4
P1
P2
P3
P4
60" (152 cm) Wide Rack Shelving
48" (122 cm) Wide Rack Shelving
P1—Wire shelves (4)
P2—Support beams (8)—4 in front, 4 in back
P3—Tie channel supports (quantity varies by size)
P4—Welded-end frame assemblies (2)
P3
P1
P2
P4

5
HEAVY DUTY METAL RACK SHELVING
INSTALLATION INSTRUCTIONS
Shelving Use Requirements
All rack shelf sizes: maximum weight limit is 2,000 lbs (907 kg)
for each shelf, not to exceed 8,000 lbs (3,628 kg) for the entire
shelving unit.
Unpack
NOTE: Use two people to assemble shelving and to move it.
1. Remove and verify the contents. See the “Parts” section to
sort out all of the parts.
2. Dispose of/recycle all packaging materials.
Assemble & Complete
■No tools or hardware required.
IMPORTANT:
■Use two people to assemble shelving and to move it.
■Determine shelf spacing before assembly.
NOTE: It is recommended to space the shelves equally from
top to bottom of the shelving unit and build it from the bottom
up. See the “End Frames/Support Beams” illustration.
■Prior to assembly, refer to the sticker located on the bottom
of one of the welded-end frame assemblies (P4) and record
model and serial numbers on the included warranty page.
There are many benets of registering the product. Find out
more and register the product online at
www.gladiatorgarageworks.com.
In Canada, contact your Whirlpool Canada LP designated
service company or call 1-800-807-6777.
Support Beam Orientation
End Frames/Support Beams
NOTES:
■It is recommended to put the rst shelf in slots 1 and 2 from
the bottom, the second shelf in slots 8 and 9 from the bottom,
the third shelf in slots 9 and 10 from the top, and the fourth
shelf in slots 1 and 2 from the top. Keep two of the shelves on
the bottom half of the shelving rack.
■The tie channel supports (P3) provide load support and
structural integrity.
■All tie channel supports (P3) must be assembled as shown in
the “Tie Channel Support Assembly” illustration.
WARNING
Excessive Weight Hazard
Use two or more people to move and assemble
shelving.
Failure to do so can result in back or other injury.
P2 - Support beams
P2 - Support beams (8)-4 in front, 4 in back
P4 - Welded-end frame assemblies (2)
P2
P2
P4

6
2. Align support beams
1. Assemble end frame
To insert the rivet head on the other side of the tie channel
support (P3), apply pressure to both sides of the tie channel
support (P3), squeezing the sides toward each other. Insert the
rivet head into the matching larger hole of the support beam
keyhole on the front and back support beam (P2). Release
pressure.
Position the two welded-end frames (P4) vertical with the
foot end of each frame at ground level and prole slots facing
forward.
4. Insert rivet into keyhole
At the desired shelf location, align both of the support beam (P2)
end tabs with the inside triangular frame slots on the welded
frame (P4).
Rotate the tie channel support (P3) into the front and back
support beam (P2), aligning the tie channel rivet heads with
the matching large diameter hole of the support beam keyhole.
This shelving unit is equipped with one, two, or three tie
channel supports (P3) for each shelf, depending on the size of
the shelf unit.
NOTE: The tie channel supports (P3) provide load support
and structural integrity. All tie channel supports (P3) must be
assembled as shown.
3. Assemble tie channel supports
P4
P2
P4
P2
P2
P2
P3
P3
P4
A
B
C

7
6. Check all beams and tie channels
5. Check the rivets
Use two or more people to move the rack shelving to its nal
location.
Check that the rivets are held behind the smaller hole of the
support beam keyholes. Repeat steps 4 and 5 for each tie
channel support.
8. Move shelving
Verify that all support beams (P2) and tie channel supports
(P3) are properly assembled and rmly seated into the top and
bottom post slots.
Place the wire shelf (P1) on top of the tie channel supports (P3)
for each shelf. Make sure that the long rods of wire shelves are
at the bottom.
Two or more racks of the same height and depth can be
connected by sharing the same welded-end frame (P4)
between them.
NOTE: Ensure there are at least two shelves per rack between
each set of welded-end frames (P4).
7. Add wire shelves
9. Congure shelving
Smaller
hole
P2
P1
P3
P4
P2
P3
P3

8
WARRANTY
For warranty information:
In the U.S.A. call 1-866-342-4089 or visit our website at
www.GladiatorGW.com
In Canada call 1-800-807-6777 or visit our website at
www.gladiatorgarageworks.ca

9
SÉCURITÉ DES ÉTAGÈRES MÉTALLIQUES
POURCHARGES LOURDES
DIMENSIONS
GARA904XIG
YGRA904X
GARB904XIG
GARS774XEG
GARS774SZG
GARM774XHG
GARS604TEG
YGRS604TGG
GARS604TKW
GARS484TEG
YGRS484TGG
GARS484TKW
A 90po (229 cm) 72po (183 cm) 72po (183 cm) 72po (183 cm)
B 24po (61 cm) 24po (61 cm) 18po (46 cm) 18po (46 cm)
C 90po (229 cm) 77po (196 cm) 60po (152 cm) 48po (122 cm)
D 22po (56 cm) 22po (56 cm) 16po (41 cm) 16po (41 cm)
E84 ½po (215cm) 72po (183 cm) 55po (139 cm) 43po (108 cm)
Cette étagère de rangement doit être placée sur une surface plane.
REMARQUES:
■Ne pas se tenir debout ou grimper sur l’étagère.
■Ne pas charger excessivement.
■Répartir uniformément le poids sur chaque tablette, et ranger
les charges les plus lourdes sur la tablette du bas.
C
B
A
E
D
Risque possible de décès ou de blessure grave si vous ne
suivez pas immédiatement les instructions.
Risque possible de décès ou de blessure grave si vous
ne suivez pas les instructions.
Tous les messages de sécurité vous diront quel est le danger potentiel et vous disent comment réduire le risque de blessure et
ce qui peut se produire en cas de non-respect des instructions.
Votre sécurité et celle des autres est très importante.
Nous donnons de nombreux messages de sécurité importants dans ce manuel et sur votre appareil ménager. Assurez-vous de
toujours lire tous les messages de sécurité et de vous y conformer.
AVERTISSEMENT
DANGER
Voici le symbole d’alerte de sécurité.
Ce symbole d’alerte de sécurité vous signale les dangers potentiels de décès et de blessures graves à vous
et à d’autres.
Tous les messages de sécurité suivront le symbole d’alerte de sécurité et le mot “DANGER” ou
“AVERTISSEMENT”. Ces mots signifient :

10
PIÈCES
P2
P1
P3
P4
Étagère de 77po (196cm) de large
Étagère de 90po (229cm) de large
P1—Tablettes métalliques (4)
P2—Poutres de support (8)—4 à l’avant, 4 à l’arrière
P3—Traverses en U (la quantité varie selon la taille)
P4—Cadres de montage dotés d’embouts soudés (2)
P3
P4
P1
P2