Cautions
1. This device is equipped with a power interface and a signal interface
on the side, which must be suitable for the power supply line
provided by the original factory.
2. The applicable power supply for this device is DC12-26V. A voltage
below this range may cause it to malfunction, while a voltage above
this range may cause the device to burn out.
3. According to the different control methods, the receiver control
method and flight control method can be divided (if this function is
needed, please contact sales and technical support in advance)
4. The receiver mode is factory default preset and does not require user
adjustment.
5. The remote control requires 4 No. 5 batteries. Please pay attention to
the direction of the positive and negative poles when installing, and
follow the instructions icon to install it. Otherwise, it cannot be
turned on.
6. Please fully tighten the connectors during use to avoid loosening and
falling, which may cause flight accidents.
7. Please do not collide during transportation or handling to avoid
structural deformation that may affect normal operation.
8. The intention of using drone flight safety as the main focus and
placing items as a supplement should be emphasized.
