Control and operation
Startup operation
Pick up the remote control, do not touch the joystick, reset all the toggle switches
above the remote control, hold down the power icon button with both hands and
thumbs for about 3 seconds, and the remote control will turn on. The shutdown
method is consistent with the startup method. After the screen displays a normal
screen with no error prompt, turn on the installed drone and power it on. At this
time, there should be a sky voltage display in the upper right corner of the remote
control screen, indicating that the connection has been successful. Otherwise,
please contact technical support.
Remote control operation
The remote control version uses the remote control to control various functions
(equipped with 4 No. 5 batteries);
The left joystick of the remote control turns on the light upwards, turns off the light
downwards, and switches back and forth to switch the light;
Push the right joystick up to move the light up, push the joystick down to move the
light down, push the joystick left to move the light left, and push the joystick right
to move the light right. When the remote control is turned off, the lighting device
maintains the command before turning off.
Note: The non remote control version is applicable to UAVs with remote control
expansion channel module. It will be equipped with signal pair wiring. The default
length is suitable for M600 UAVs. Insert the signal line into multiple F channel
interfaces of flight control as required, and adjust the channel settings in the UAV
parameter adjustment software. Novice and inexperienced personnel are not
recommended to purchase the non remote control version.
