LENCO PL-4201 User manual

Operating Instructions
Before operating the unit, please read this manual thoroughly.
42 Plasma Colour Television
PL 4201
3U84011A [E] COVER 20/12/05, 15:211

2
Features
•What is a Plasma Monitor?
If voltage is inputted to gas in glass panels, ultraviolet rays is outputted and fused
with a fluorescent substance. At this moment, light is emitted. A Plasma Monitor is a
next generation flat Display using this phenomenon.
•On-Screen Language Display in English, German, French, Italian, or Spanish
•NICAM/German A2 STEREO Reception
•Auto tuning system
•80 Channel memory
•Videotext – TOPtext
•Remote control
•Sleep timer
•3 Scart socket
•S-Video Input (side)
•Headphone Jack (for mini plug)
•PC-VGA
•HDMI-connection
•16 : 9 format
•BBE sound
• CE Symbol Guaranteeing Compliance to Currently Effective European Standards.
Headphone-Warning
Loud music can keep your hearing damaging. The hearing may not recover from the damage. The injury of
the hearing does not heal up. Therefore, do not set the headphone’s volume louder extremely.
Battery notice
The legislative organ regulates the disposal of batteries clearly. Batteries must be collected from a seller or
communities many gathering places for general house with no charge. Never throw away battery into the
waste basket in your home. Use the free returning method! Take care the environment. Return the exhausted
battery.
Power save notice
Save the power! In case of long operation-pause(e.g. through the night), turn off the unit with main power
switch completely. Then the unit is separated from power supply and no power is consumed. The TV-
channel stored in built-in tuner will be kept even in a power failure indefinitely.
Waste Disposal Tip
Do not put in domestic waste when disposing of the device at the end of its service life. Retail traders
are willing to take back such devices in normal household quantities and at no extra charge and there
are also municipal collection points.
3U84011A [E] P02-10 20/12/05, 15:212

3
Contents
Features ................................................................... 2
Contents ................................................................... 3
Important notice, Installation .................................... 4
Location of controls .................................................. 7
Remote Control ........................................................ 8
Antenna connection ............................................... 10
Quick guide for MENU-operation ........................... 11
On-screen Language Selection.............................. 12
Teletext Language Selection.................................. 12
Automatic station presetting with the built-in Tuner ... 13
Change the order of stored channel....................... 14
Manual TV station presetting ................................. 15
Connection to Satellite Receiver ............................ 16
Basic Operation...................................................... 17
Timer functions ....................................................... 18
Stereo reception with the built-in tuner................... 19
Bass, Treble and Balance ...................................... 21
Selecting the BBE .................................................. 22
Turning off the built-in speakers ............................. 22
Brightness, Contrast, Colour and Sharpness/DNR .... 23
Selecting the color temperature ............................. 24
Blue back ............................................................... 24
Picture format ......................................................... 25
Scrolling the CINEMA-Wide picture ....................... 26
Auto 4:3 Default ..................................................... 26
Full White ............................................................... 27
Screen Saver ......................................................... 27
Static Image ........................................................... 27
Using the panel lock feature................................... 28
PC-Setting .............................................................. 29
Connecting an HDMI or a DVI device to the
HDMI input ............................................................. 31
Teletext .................................................................. 32
Conceal stored channels........................................ 34
Connection to other equipment .............................. 35
AV-Color adjusting ................................................. 37
Troubleshooting table............................................. 38
Specifications ......................................................... 38
3U84011A [E] P02-10 20/12/05, 15:213

4
Important notice, Installation
This unit has been produced according to all current safety regulations. The following safety tips should safeguard
users against careless use and the dangers connected with such use.
•Every electrical appliance can have a defect despite careful and thorough manufacturing. If you detect smoke
development or an exceptionally strong build-up of heat, then pull out the power plug immediately.
•Ensure that the unit is sufficiently ventilated! Never place next to or underneath curtains!
• Only plug flex into 230V/50Hz. Do not plug into any other voltage.
•The apparatus must be connected to a main socket outlet with a protective earthing connection.
•The socket-outlet must be installed near the equipment and easily accessible.
•Make sure that an expert carries out any repairs.
• Do not open unit. Your own attempts to repair the unit could result in a fire.
•Keep away from rodents. Rodents (and also cockatiels) enjoy biting into electric flexes.
The animal can cause a short cut (fire hazard!) and receive a fatal electric shock.
•Always hold plug when pulling out plug from power mains supply system. Do not pull on flex. The flex can become
overloaded and cause a short cut.
•Never wet clean. Only use a damp cloth, the same as when cleaning furniture.
•Do not submerge in or under water!
•Set up unit so that no one is able to trip over the flex.
•Only use the unit on a stable, shock-free base in order to avoid any danger from falling.
•Take note that toddlers can pull the unit down from the table or cupboard by means of its flex. Children can hurt themselves
when doing this.
• Do not use the unit near heat sources. The casing and flex could be damaged by the impact of heat.
• Watch out for kiddies copying what adults do! Do not stick any objects through the vents!
• The vents must remain open! No newspapers or covers should be put on the unit!
•The remote control is not a toy! Toddlers could swallow the batteries. If a battery has been swallowed, please seek out
a doctor immediately.
•The screen is made of glass and can break if damage is done to it. Be careful when collecting sharp-edged glass splitters.
You could be hurt or the unit could be damaged.
•If the unit is mounted on the wall, contact the shop where you purchased the unit for advice, and leave the installation work
to experts. Incomplete installation work can cause you injuries.
•When installing the set on a wall, allow at least 6 cm clearance between the rear of the set and the wall. Clearance of less
than 6 cm will obstruct the vents and cause the interior of the set to overheat, resulting in faults or damage to the set.
•Taking fall-prevention measures
-If these measures are not taken, the unit can fall and you could be injured.
-Contact the shop where you purchased the unit to obtain full details of the measures.
• When a TV stand is used,
-Ensure the unit is fully on the stand and placed in the centre.
-Do not leave the stand doors open.
-You could be hurt as a result of the unit falling or breaking, or your fingers being caught or jammed. Take extra
precautions if you have children.
Attention!
Cleaning instructions for your Plasma TV.
Safety note:
Before you start to clean, switch the set's power off completely and disconnect the plug from the mains power supply.
Be careful not to scratch the plastic coated front panel - it is highly vulnerable to accidental scratching (e.g. by
fingernails or other sharp items). While cleaning, do not wear jewelry that could cause surface scratching (such as
rings, wrist-watch, etc.). Use a lint-free cloth and pure water to clean with, but make sure the cloth is thoroughly wrung
out so that it is just damp and not soaking wet - also make sure that the cloth is free from any dirt that could cause
scratching to the surface.
Wipe the set clean using minimal pressure.
Do not use standard window cleaning fluid. Its alcohol / ammonia will dissolve the front window’s coating.
Never use solvent or thinner. Never use special cleaners which are designed for cleaning PC Monitors or CRT TVs.
Finally carefully rub dry with a clean dry lint-free cloth.
Do not use paper towels or tissues to clean the set - paper can disintegrate when wet or may leave a trail of dust
behind. Some paper can also be abrasive and scratch your screen.
Please pay attention to the following instructions in order to avoid receiving a life-threatening electric shock:
•Protect against moisture. Never use in the bath or sauna.
•Never use near a bath, shower or swimming pool.
•Never use the unit if it has got wet. This can also mean condensation moisture, which occurs in the winter when the cold
unit is brought into a heated flat. Wait before operating the unit especially after it has been transported in the winter, until
the cold unit has adjusted to the room temperature.
•Do not place any heavy objects on the flex. Electrical isolation could be damaged.
•Never wrap insulating tape around damaged flexes or on damaged plugs. These should be repaired by experts instead.
•Never run a unit with a defect cabinet. Do not make provisional repairs, if a cabinet is damaged. This should be replaced
by a new cabinet.
•Unplug the unit from the mains power supply prior to the cleaning of the unit.
3U84011A [E] P02-10 20/12/05, 15:214

5
Important notice, Installation
To protect the unit during a thunder storm unplug the AC
power cord and disconnect the antenna. Caution: Do
not touch the antenna connector.
When you leave your home for a long period of time, unplug
the AC power cord for safety reasons.
The unit becomes warm when in operation. Do not place
any covers or blankets on the unit in order to prevent
overheating. The ventilation holes are not to be blocked. Do
not set up near radiators. Do not place in direct sunshine.
When placing on a shelf leave 10 cm free space around the
whole unit.
This Plasma display is designed to be mounted horizontally
(wide viewing).
10cm
OK !
OK !
Avoid to place the unit on any surfaces that may be subjected
to vibrations or shocks.
Make some space around TV (Correct shelf assembly).
The apparatus shall not be exposed to dripping or splashing
and that no objects filled with liquids, such as vases, shall
be placed on the apparatus.
Liquids spilled into the unit can cause serious damages.
Switch OFF the Power Supply to the unit and consult a
qualified service personnel before attempting to use the unit
again.
3U84011A [E] P02-10 20/12/05, 15:215

6
Important notice, Installation
Moving the unit or carrying by hand
When the unit is moved a long way, unplug the power cord and disconnect the antenna,
connecting cables and any fall-prevention apparatus.
•Moving without doing so could result in damage to the power cord, a fire, electric shocks or injuries from
dropping the unit.
Ensure that unpacking and transfer of the unit is carried out by two or more people and that
the unit stays upright when doing this.
•Do not carry the unit with its screen facing upwards or downwards.
When the TV stand has casters, remove caster cups from the stand
and push it while supporting the unit.
•Ensure that you support the unit when the stand is pushed, as this can
cause the unit to fall and you could be injured.
Handle carefully to avoid shocks.
Secure the casters when the unit is installed on a TV stand with casters.
•The stand can move and you could be hurt if the casters are not secured.
Remove casters when the stand is placed on a soft surface such as a mat
and carpet.
The distance between eyes and the screen should be about 5 ~ 7 times
as long as diagonal length of the screen.
•If not, eyes will strain.
When installing the Monitor on a table, be careful not to place the edge
of its stand.
•This may cause the Monitor to fall, causing serious injury to a child or adult,
and serious damage to the Monitor.
Possible Adverse Effects on Plasma Screen: If a fixed (non-moving) pattern remains on the plasma
screen for long periods of time, the image can become permanently engrained in the plasma TV panel
and cause subtle but permanent ghost images. This type of damage is NOT COVERED BY YOUR
WARRANTY. Never leave your TV on for long periods of time while it is displaying the following formats or
images:
•Fixed Images, such as stock tickers, video game patterns, TV station logos, and websites.
•Special Formats that do not use the entire screen. For example, viewing letterbox style (16:9) media
on a normal (4:3) display (black bars at top and bottom of screen); or viewing normal style (4:3)
media on a widescreen (16:9) display (black bars on left and right sides of screen).
To avoid the engraining, we recommend that you use the screen saver function. (see P.27)
The following symptoms are not signs of malfunction but technical limitation. Therefore we
disclaims any responsibility for these symptoms.
•Plasma display panels are manufactured using an extremely high level of precision technology,
however sometimes parts of the screen may be missing picture elements or have luminous spots.
This is not a sign of a malfunction.
•Do not install the TV near electronic equipment that is susceptible to electromagnetic waves.
It may cause interference in images, sound, etc. In particular, keep video equipment away from this
product.
• Effect on infrared devices – There may be interference while using infrared devices such as infrared
cordless headphones.
3U84011A [E] P02-10 20/12/05, 15:216

7
Location of controls
Front Side
Description of Indicators and Controls
1. Main Power Switch: To turn the unit on or off completely.
2. CHANNEL ▲/▼-Buttons: Press ▲to change to a higher numbered channel set into memory. Press
▼to change to a lower numbered channel set into memory. In Menu : Setting. In Standby : Turning
on the unit.
3. Volume ▲/▼-Buttons / In Menu : Setting. To display the menu-screen, press these buttons
simultaneously for more than one second.
4. INPUT-Button: Select input mode for TV/AV/HDMI/PC.
5. POWER button: To turn the unit standby mode on and off.
6. STANDBY/ON indicator: It lights up in red at STANDBY, and in green at POWER ON.
7. Remote sensor
8. Loudspeakers
9. HEADPHONES jack: Plug headphones with a mini plug (3.5 mm) into this jack.
10. AV4-Input: Input for analogue A/V-Signal (Composite). If your equipment has an S-video connector,
use an S-video cable instead of a standard yellow video cable (You still must connect the standard
red and white audio cables for full system connection, but do not connect a standard yellow video
cable at the same time or the picture performance will be unacceptable.)
Left Side
AV-4 IN
8
9
10
81 234567
3U84011A [E] P02-10 20/12/05, 15:217

8
Function Page
Turn the unit on or off 11
Sleep-Timer 17
Display program position number 17
Turn the sound on/off 17
Select channel
13, 17, 32, 34
Select Videotext page 32
Select connective socket 11, 29,
35, 36
Switches between the present channel and the
last selected channel 17
Sub Page selection 33
Call Menu
Select TV-channel or Videotext page step by step 17, 32, 34
In Menu: Setting
In Standby: Turning on the unit 11
Volume 17
In Menu: Setting
Memorize
Videotext ON/ Mix/ OFF 32
Reset Sound/Picture adjustments 21, 23
Videotext enlargement 33
Program position-skipping 34
Answer a Quiz 33
Two Channel-Sound TONE 1/2 selector 20
Videotext page 100 33
Videotext-Timer display 17
Hold the text page 33
TOPtext buttons 32
Select picture format 25
Remote Control
3U84011A [E] P02-10 20/12/05, 15:218

9
Z
Z
Z
Z
Z
Z
Remote Control
Install the batteries
Use batteries type UM-4 (AAA-Size).
Do not use the storage batteries. The remote control does not work properly with weak voltage from the storage
batteries. Replace the exhausted batteries with new batteries. Never charge batteries. Batteries may explode by
the charge.
Note:
An exhausted empty batteries may leak, namely corrosive electrolyte will leak out. The remote control may
damage by it. Therefore remove the exhausted batteries early.
3
1Open the battery compart-
ment.
Close the battery
compartment.
2Install the batteries as shown
below.
The remote control handset will not work properly in the following cases:
If bright sunlight directly beams onto the unit front. If an obstacle is placed between the unit and the
handset.
If the batteries have not been installed according
to their polarities.
If the batteries are weak.
Distance of Remote Control Operation
Point the remote control
directly at the remote sensor.
Transmitter window
Maximum distance approx. 5m
Remote sensor
!
!
3U84011A [E] P02-10 20/12/05, 15:219

10
Antenna connection
Note: Before you connect something:
•To avoid every possible damage, turn off the TV-unit with Main Power Switch and then pull the power
plug out.
•Arrange the desired connection.
•When the connection made up firmly and correctly, connect the unit to 230V and turn the unit on.
Connect the antenna as shown below. Connect the unit with an outdoor antenna (G) or a cable-net (A). In
case of reception disturbance, consult with a specialist of antenna.
(A) Antenna connection: The built-in Hyperband CATV tuner can receive all analog cable television
programs.
(B) Variable Audio output: To connect with an audio amplifier and external speakers, and adjust the
audio level using the TV’s remote control.
To control the audio, turn on the TV and the stereo amplifier, and turn off the TV's built-in speakers
(see page 22).
(C) Scart sockets (AV1/AV2/AV3): To the connection of scart cables. See page 36 for AV4-Input.
(D) HDMI input: See page 31.
(E) PC Monitor input (PC): See page 29.
(F) Power supply: Connect the supplied power cable. Connect to 230 V / 50 Hz only. Never
repair a damaged AC power cord with isolation-tape. Have a specialist exchange with a new AC
power cord. Do not let your pet loose near the cable. To bite isolation is danger of life. Above all, a rat,
a parakeet, a hamster, a rabbit and other toothed animals can bite the cable.
(G) Outdoor antenna: If the outdoor antenna already exists, you can also connect to it for analog TV-
program.
(H) Bracket holes: To fix a wall mounting bracket (not supplied) here, remove the screws.
(C)(A) (B) (F) (E)
(G)
(H)
(D)
3U84011A [E] P02-10 20/12/05, 15:2110

11
Quick guide for MENU-operation
Make sure the antenna connection
and power supply as the description
on previous page.
Preparation:
•Turn on the unit with Main Power Switch on the bottom left
of screen. Standby indicator will light up in red. Then press
POWER on the unit or (POWER) on the remote control.
Standby indicator will change to green.You can also turn the
unit on with CHANNEL ▲/▼ on the unit or /
on the remote control.
• Press 1. CH1 will appear.
Call MENU and for example: Select AUTO TUNING.
1Press MENU.
If you press MENU for the first time after the purchase, the
Language-selection screen (step 1 on next page) will
appear.
2Press or to
select .
3Press or
to select
AUTO TUNING.
... on the following
pages the MENU can
be called in the same
way as here.
4Press MENU repeatedly until the MENU disappears.
PICTURE
menu
Each setting
option
Short guide
AUDIO
menu SETUP menu OPTION menu
BRIGHTNESS 25
CONTRAST 25
COLOUR 25
TINT 0
SHARPNESS 25
DNR OFF
: SELECT : ADJUST
: EXITMENU
Note:
•Each time you press 0/AV, the AV
mode will change as follows:
TV AV1 AV2
AV3
AV4PC HDMI
If no buttons are pressed for more than
approx. 60 seconds, the MENU
disappears automatically.
: SELECT : ADJUST
: RETURNMENU
AUTO TUNING
MANUAL TUNING
CH ALLOCATION
TEXT LANGUAGE WEST
LANGUAGE ENGLISH
: SELECT : ADJUST
: EXITMENU
AUTO TUNING
MANUAL TUNING
CH ALLOCATION
TEXT LANGUAGE WEST
LANGUAGE ENGLISH
3U84011A [E] P11-18 20/12/05, 15:2111

12
On-screen Language Selection/Teletext Language Selection
1Select LANGUAGE.
Then press or to select the desired language.
2Press MENU repeatedly until the MENU disappears.
On-screen Language Selection
1Select TEXT LANGUAGE.
Then press or to select WEST or EAST.
2Press MENU repeatedly until the MENU disappears.
Teletext Language Selection
AUTO TUNING
MANUAL TUNING
CH ALLOCATION
TEXT LANGUAGE WEST
LANGUAGE ENGLISH
ENGLISH / DEUTSCH / FRANCAIS
ITALIANO / ESPANOL
: SELECT : ADJUST
: RETURNMENU
: SELECT : ADJUST
: RETURNMENU
AUTO TUNING
MANUAL TUNING
CH ALLOCATION
TEXT LANGUAGE WEST/EAST
LANGUAGE ENGLISH
3U84011A [E] P11-18 20/12/05, 15:2112

13
PAL CH 1
Automatic station presetting with the built-in Tuner
The Automatic station presetting is not suitable for the combined operation with Satellite- or
Digital-receiver (e.g. D-Box). These units use own station memory. It is impossible to store the
same channel again which was already stored in a TV.
If you receive all stations through Satellite, do not execute with the Automatic station presetting.
The automatic station presetting can not find any station which was memorized in a Satellite
receiver. See page 16.
Preparation:
Connect a antenna or a cable-net.
Do not connect any other unit or cable.
To avoid every reception disturbance, all connected unit must
be turned off and power supply is connected.
Press 1-button. CH1 will appear.
1Select AUTO TUNING.
2Press then press or to select Video
system.
3Then press .
The broadcast-searcher searches the broadcasts and
stores them in order. During the search the sound is
muted.
When all programs have been stored, the AUTO TUNING
menu will appear automatically.
   



: SELECT : ADJUST
: RETURNMENU
: SELECT : ADJUST
: RETURNMENU
AUTO TUNING
MANUAL TUNING
CH ALLOCATION
TEXT LANGUAGE WEST
LANGUAGE ENGLISH
3U84011A [E] P11-18 20/12/05, 15:2113

14
Change the order of stored channel
1Select CH ALLOCATION.
Then press .
2Press or until the position number that
you want to move appears (e.g. CH 40), then press
ENTER.
3Press or until the program-position on
which you want to put the moving program appears (e.g.
CH 5), then press ENTER.
4
The original program 40 is now stored in memory position 5.
To arrange the other channels, repeat this procedure or...
5Press MENU repeatedly until the MENU disappears.
Note:
To arrange all channels, begin with
program 1.
Furthermore, continue this procedure to
select the broadcast that should be seen
on program-position 2, 3, 4 and so on.
The Automatic station presetting
stores the found station in a
specific order. This order can be
changed.
CH 40
CH ALLOCATION CH 01
:SELECT
:RETURNMENU:SET
ENTER
CH 40
CH ALLOCATION CH 05
:SELECT
:RETURNMENU:SET
ENTER
CH 05
CH ALLOCATION CH 40
:SELECT
:RETURNMENU:SET
ENTER
: SELECT : ADJUST
: RETURNMENU
AUTO TUNING
MANUAL TUNING
CH ALLOCATION
TEXT LANGUAGE WEST
LANGUAGE ENGLISH
3U84011A [E] P11-18 20/12/05, 15:2114

15
Manual TV station presetting
Example: Preset the ZDF on program position 2.
1Select MANUAL TUNING. Then press .
2Press or to select PAL or SECAM-L.
Then press ENTER.
3Press . The auto search starts forward. It will stop at
each station with good reception. Press again until you
receive the ZDF. Then press ENTER.
4The channel position number will be highlighted. Press
or repeatedly until the number next to
CH change to 2. Then press ENTER.
The ZDF was now stored in the channel position CH 2.
5Repeat the steps 2and 4to preset other TV stations.
6Press MENU repeatedly until the MENU disappears.
Notes:
•The auto search stops at the best
receiving position automatically.
A manual fine tuning is normally not
necessary. If want, you can do the
manual fine tuning additionally. In
step 3, when the auto search
stopped at each station, press
or until the desired
fine tuning achieved.
Then press ENTER.
•The search moves up to the next
station position automatically. If
want, you can also hold the search
manually. Press or at the
desired position. The search keeps
hold. If want, do the fine tuning as
the description above.
Usually Automatic station presetting stores all stations of each reception-area. In case of bad
receiving condition, some broadcasts may not be stored. These stations can also be stored
manually.
: RETURNMENU
  
: SELECT
: SET
ENTER
: RETURNMENU: SET ENTER
  
: ADJUST
MENU: SET ENTER
  
: F.TUNE
: RETURN
: SEARCH
: SELECT : ADJUST
: RETURNMENU
AUTO TUNING
MANUAL TUNING
CH ALLOCATION
TEXT LANGUAGE WEST
LANGUAGE ENGLISH
3U84011A [E] P11-18 20/12/05, 15:2115

16
Connect with Satellite receiver as shown below.
Select the TV-Program at the satellite receiver. To do this, use the remote control of the satellite
receiver. You can not store the same station once again additionally in PDP-Monitor which already
stored in satellite receiver.
Connection to Satellite Receiver
Plasma television
Satellite
Receiver
Scart-cable (not supplied)
68
3U84011A [E] P11-18 20/12/05, 15:2116

17
Basic Operation
Note:
If the built-in tuner does not receive
anything (e.g. if no antenna is
connected) during TV-operation, then
the TV-unit will change to standby after
approx. 15 minutes.
Press or to change to the program
forward or backward. The changing takes approx. 2
seconds. If the auto search stored only 5 stations,
these only 5 also will appear. Still uncovered or
hidden store position (see P.34) will not appear.
Channel selection
With the 10 number buttons.
Example:
•No. 2: Press 0and within 2 seconds, press 2.
The station stored in the 2nd store position will
appear.
•No. 29: Press 2and within 2 seconds, press 9.
The station stored in the 29th store position will
appear.
QuickView
button allows you to go back to the last selected
channel.
Volume adjusting
Press or to adjust the volume. The volume level
disappears after 4 seconds.
MUTE
Press . The sound will be cut off. MUTE will appear for
approx. 4 seconds.
The muting can be released by pressing again or or .
DISPLAY
Press DISPLAY.
Channel number
and wide screen
type will appear.
The display will
disappear after 4
seconds.
STATUS
Press STATUS. The clock and a program information will appear
approx. 2 seconds later, if the station supported.
SLEEP TIMER
Press . SLEEP
and the minutes
until the shut-off
will appear. Each
time you press
the number near
SLEEP will
change.
When the
displayed time
runs out, the unit will switch to standby. The display will
disappear after approx. 4 seconds.
To cancel the sleep time:
Press repeatedly until “0” appears.

 

SLEEP
120
3U84011A [E] P11-18 20/12/05, 15:2117

Timer functions
The on timer feature allows you to
automatically turn on your TV after a
preset amount of time (up to 12
hours and 59 minutes) at the
selected channel.
The off timer also allows you to turn
off your TV after a preset amount of
time. You can set the off timer in
conjunction with the on timer.
Example: Turning on the TV to channel 3 at 10:30.
1Select ON TIMER.
Then press ENTER.
2Press or to enter the hours and minutes
at which you want your TV to automatically switch on.
•For rapid time change in ten minute intervals, press and
hold the or button.
Press .
3Press or to select the channel you wish
to display when you TV switches on.
Press ENTER.
If you wish to set the OFF TIMER, press or
to select OFF TIMER at step 1.
4Press MENU repeatedly until the MENU disappears.
Put your TV into standby mode by pressing (POWER)
button.
Notes:
•button allows you to set the
time in step 2 backward.
•When a timer-event is executed, the
timer will return to 00:00.
•If the OFF TIMER and SLEEP-
timer overlapped, the TV will shut off
with the earlier reached timer.
•The TV will automatically turn off
approximately 1 hour later after the
ON TIMER turns on the TV. If you
wish to continue watching the TV,
press any button to cancel the one
hour automatic shut off. This shut off
feature prevents the TV from playing
continuously if no OFF TIMER is set.
If OFF TIMER is set, the shut off
feature does not work.
18
  
  
  

  
MENU
: SELECT
: SET ENTER
: ADJUST
: RETURN
  
  
  

  
: SELECT
: RETURNMENU: SET
ENTER
  
  
  

  
MENU: SET ENTER : RETURN
: SELECT: ADJUST
3U84011A [E] P11-18 20/12/05, 15:2118

19
 
 
   
 
Stereo reception with the built-in tuner
NICAM stereo sound reception:
1Select NICAM.
Press or to select AUTO or OFF.
Select OFF if you want no NICAM-reception.
2Press MENU repeatedly until the MENU disappears.
Followings can be displayed by NICAM-reception.
This built-in Tuner can receive
Stereo-/2 channel-program. In case
the Stereo broadcast was send out
with NICAM, this unit can
distinguish these NICAM Stereo
broadcasts automatically.
Note:
In case of bad reception, the stereo
sound also can be disturbed.
“NICAM ST” illuminates
for approx. 4 seconds
when a NICAM
STEREO broadcast
signal is received.
“NICAM M1”
illuminates for approx.
4 seconds when a
NICAM MONO A
broadcast signal is
received.
“NICAM M1/M2”
illuminates for approx.
4 seconds when a
NICAM MONO A and
MONO B broadcast
signal is received.
It will be displayed for
the NICAM signal for
approx. 4 seconds
when the “NICAM OFF”
is selected in menu
screen.
Stereo reception in Germany
“STEREO” illuminates
for approx. 4 seconds
when a STEREO
broadcast signal is
received.
NICAM AUTO / OFF
BASS 25
TREBLE 25
BALANCE 0
BBE OFF
SPEAKERS ON
HDMI HDMI
: SELECT : ADJUST
: RETURNMENU
STEREO
3U84011A [E] P19-25 20/12/05, 15:2119

20
Stereo reception with the built-in tuner
In case of 2 channel-sound reception,
you can select the desired sound with
AUDIO 1/2.
Each time you press the AUDIO 1/2, the both sound channels
alternate with each other.
NICAM-2 channel-Sound reception (not in Germany)
2 channel-Sound reception in Germany
 
 
 
   
3U84011A [E] P19-25 20/12/05, 15:2120